Академический Документы
Профессиональный Документы
Культура Документы
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
Router>enable
Router#conf
Router#configure ter
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R1
R1(config)#interfac
R1(config)#interface s0/0/0
R1(config-if)#ip add
R1(config-if)#ip address 10.1.1.1 255.255.255.252
R1(config-if)#no shu
R1(config-if)#no shutdown
R1(config-if)#
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
R1(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
R1(config-if)#interfac
R1(config-if)#inter
R1(config-if)#exit
R1(config)#inter
R1(config)#exit
R1#
%SYS-5-CONFIG_I: Configured from console by console
R1#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#int
R1(config)#interface f0/0
R1(config-if)#ip add
R1(config-if)#ip address 172.30.10.1 255.255.255.0
R1(config-if)#no shu
R1(config-if)#no shutdown
R1(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
R1(config-if)#exit
R1(config)#
R1(config)#exit
R1#
%SYS-5-CONFIG_I: Configured from console by console
R1#
R1#copy run
R1#copy running-config star
R1#copy running-config startup-config
Destination filename [startup-config]?
R2
Router>enable
Router#terminal
Router#conf
Router#configure terminal
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname
% Incomplete command.
Router(config)#hostname R2
R2(config)#interface
% Incomplete command.
R2(config)#interface s0/0/0
R2(config-if)#ip 10.1.1.2 255.255.255.252
^
% Invalid input detected at '^' marker.
R2#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#interface s0/0/1
R2(config-if)#ip addre
R2(config-if)#ip address 10.2.2.2 255.255.255.252
R2(config-if)#no shu
R2(config-if)#no shutdown
R2#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#interf
R2(config)#interface f0/0
R2(config-if)#ip add
R2(config-if)#ip address 209.165.201.1 255.255.255.0
R2(config-if)#no shut
R2(config-if)#no shutdown
R2(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
R2(config-if)#exit
R2(config)#exit
R2#
%SYS-5-CONFIG_I: Configured from console by console
R2#copy
R2#copy ru
R2#copy running-config st
R2#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
R2#
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to
up
R2#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#ip route 172.30.30.1 255.255.255 10.2.2.1
^
% Invalid input detected at '^' marker.
R2(config)#exit
R2#
%SYS-5-CONFIG_I: Configured from console by console
R2#eit
Translating "eit"...domain server (255.255.255.255)
% Unknown command or computer name, or unable to find computer address
R2#
R2>enable
R2#conf
R2#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#ip route 172.30.10.0 255.255.255.0 10.1.1.1
R2(config)#ip route 172.30.30.0 255.255.255.0 10.2.2.1
R2(config)#exit
R2#
%SYS-5-CONFIG_I: Configured from console by console
R2#copy
R2#copy run
R2#copy running-config star
R2#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
R2#
R2 con0 is now available