Академический Документы
Профессиональный Документы
Культура Документы
2
Energy Management Lighting Control Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Sensing Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
LevNet RF™ Wireless Self-Powered Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Wall Switch Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Provolt™ Self-Contained Sensors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Line Voltage Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Low Voltage Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Power Packs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Power Base Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Outdoor Motion Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Photocells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Room Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
LevNet RF™ Wireless Self-Powered Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Lumina™ RF Wireless Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Integrated Room Control (IRC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Hospitality Key Card Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Table of Contents
Centralized Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
GreenMAX® Relay Control System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Track Light Limiting Panel (TLLP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
EZ-MAX® Plus Standalone Relay Control System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Distributed Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Sector® Intelligent Digital Lighting Control System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
VerifEye™ Submetering Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
www.leviton.com/les 3
4
LEVITON COMMERCIAL LIGHTING CONTROL SOLUTIONS
Every industry, facility and application has different lighting control needs. Some needs can be met with a simple solution, such
as an occupancy sensor, while others require the advanced customization and control of GreenMAX® and Sector® systems.
Leviton offers a spectrum of lighting control and energy management strategies to meet any application:
• Occupancy and Vacancy Sensing Control - A complete line of PIR, ultrasonic, multi-technology and daylight harvesting sensors
• Room Control - LevNet RF™ Wireless Self-Powered Solutions, and Integrated Room Control (IRC)
• Centralized Control - EZ-MAX® Plus and GreenMAX® Relay Control Systems
• Distributed Control - Sector® Intelligent Digital Lighting Control Systems
• Hybrid Controls - Combined Leviton technologies to meet any application with customized control
• Metering Solutions - VerifEye™ Submetering Solutions include submetering equipment, data collection and software
products, for energy monitoring and tenant billing options
*Please see the Leviton Commercial Entertainment Product Catalog for more information, or visit Leviton.com/Entertainment.
**Please see the Leviton Commercial Architectural Controls Catalog for more information, or visit Leviton.com/Architectural.
www.leviton.com/les 5
Leviton Lighting Control Solutions can be selected and tailored to commercial, institutional and industrial
applications including:
• Single, small, midsize and large office complexes • Retail spaces • Airports
• K-12 schools and college campuses • Municipalities • Warehouses
• Museums, convention centers and lecture halls • Houses of worship • Restaurants
• Health care and hospital facilities • Shopping malls and complexes • Government facilities
• Prison and correctional facilities • National parks and monuments
Leviton Lighting Control Solutions help facilities meet energy saving and lighting control goals. Using simple and advanced
methods, Leviton solutions leverage energy saving technologies for:
Code Compliance Implementing a Leviton solution as a new construction or retrofit project can meet requirements set by
state, federal and local municipal codes for sustainability and energy efficiency. Tax incentives and utility company rebates
are also available for eligible projects. Leviton devices can help meet ASHRAE Standard 90.1 2010, California Title 24 2013,
IECC and LEED certification requirements. Learn more about specific product code compliance at
www.leviton.com/energycodes.
Dimming Reduces
Dimming and Switched Lighting Whether switching lights ON or OFF based on incandescent energy
occupancy or subtly dimming multiple zones, reducing lighting is one of the easiest ways lights by: consumption by:
Lighting Control Solutions | Commercial
LED Ready LED lighting is one form of adaptive lighting with dimming capabilities and dramatically reduces energy needed to
power light fixtures. LEDs can be used with a variety of control types including 1-10V dimming, sourcing, sinking, 0-120VAC
reverse and forward phase, DMX and other applications.
Occupancy Detection Occupancy sensing takes the burden of lighting control from occupants and into a self-contained,
automated system. Numerous styles of occupancy sensors accommodate a broad range of coverage areas and patterns of
usage. Leviton’s occupancy sensor line includes commercial and residential, self-powered wireless, wide-view and high-bay,
dual-relay and outdoor models for a broad range of coverage areas and patterns. These products can help buildings meet
mandatory ASHRAE 90.1, IECC and Title 24 requirements, and are applicable toward earning LEED certification points.
Timed Controls Using timers to automate switching of lights and other loads is a simple way to ensure that devices are
only on for a set period of time. Sophisticated relay systems (such as EZ-MAX Plus and GreenMAX) provide advanced load
scheduling based on scheduled or astronomical time. Leviton offers preset and programmable timer switches as well as relay
systems that integrate with lighting and other building controls in commercial and industrial applications. These products
can help buildings meet mandatory ASHRAE 90.1, IECC and Title 24 requirements, and are applicable toward earning LEED
certification points.
Integration with Building Controls Integrating lighting, security, HVAC and other building management systems into a single
control system provides optimal energy efficiency. Integrated systems provide superior interoperability as well as essential
function for companies participating in load shedding programs. Leviton energy management components are building
blocks that can interact with other Leviton products and, in some cases, with non-Leviton building controls.
Demand Response Demand response POTENTIAL SAVINGS WITH LIGHTING CONTROL STRATEGIES
is an energy conservation strategy that
involves reducing lighting loads during 100% 95%
peak energy usage times. These high- 85%
demand times of day are communicated 80%
by the utility company to the facility
through the use of building automation
60% 60%
systems (BAS) or building management
systems (BMS). Demand response is 46%
mandatory to meeting California Title 40%
24 code requirements. GreenMAX Relay
27% 26%
Control Systems, IRC, Dimensions® 20% 23% 23%
20%
D4000 and Sector Distributed Control
Systems all provide demand response
capabilities. 0%
All Strategies Occupancy + Occupancy + Occupancy + Load Dimming: Dimming: Occupancy Bi-Level
Daylighting + Daylighting Hold Off Shedding Task Tuning Daylighting Sensors Switching
Task Tuning Photocell
6
Daylighting By utilizing present natural light within Average Daylighting Savings for Commercial Facilities
a space, facilities reap the dual benefits of reduced
energy usage and a more pleasant, ambient building
environment. Photocells and timed systems (such as Standard Savings
GreenMAX, EZ-MAX Plus, IRC and Sector) measure light
19¢
BENEFITS FROM DAYLIGHTING 13¢
• Energy savings
• Reduce peak electric load Source: Midwest Energy Efficiency Alliance
Lighting, heating and air conditioning account for up to 70% of all energy being consumed in today’s modern buildings.
Daylighting controls are the best way to optimize the low cost, natural resource of daylight.
Source: Commercial Buildings Energy Consumption Survey (CBECS) 1995, released July 1998 by the Energy Information Administration
www.leviton.com/les 7
OCCUPANCY SENSING CONTROL
Occupancy sensors deliver one of the simplest and most effective methods of reducing energy usage. Basic rooms such as
restrooms, private offices, medical exam rooms and meeting rooms will see a significant drop in lighting costs when an
occupancy sensor is installed.
GOOD SOLUTION
OCCUPANCY SENSOR WITH MANUAL-ON/OFF CONTROL
SOLUTION REQUIREMENTS
PRODUCT QUANTITY
Occupancy Sensor Good –OS Wall-box Only, 1 Zone
ODS10-IDW PIR Wall Switch Occupancy Sensor
OR OSSMT-MDW Multi-Technology Wall Switch Occupancy Sensor 1
ODS0D-IDW Dual Relay PIR Wall Switch Occupancy Sensor
OR OSSMD Dual Relay Multi-Technology Wall Switch Occupancy Sensor
BETTER SOLUTION
OCCUPANCY SENSOR WITH AUTO-ON/OFF CONTROL
SOLUTION REQUIREMENTS
PRODUCT QUANTITY
8
BEST SOLUTION
OCCUPANCY SENSOR MULTI-ZONE/BI-LEVEL
SWITCHING SOLUTION
SOLUTION REQUIREMENTS
PRODUCT QUANTITY
Provolt Line Voltage Occupancy Sensor
O2C15-IDW PIR Ceiling Mount Occupancy Sensor 1
OR 02C20-MDW Multi-Technology Ceiling Mount Occupancy Sensor
www.leviton.com/les 9
BEST SOLUTION
OCCUPANCY SENSOR STAIRWELL SOLUTION
Down Up Down Up
Person 2
Person 2
Enters
Exits
SOLUTION REQUIREMENTS
PRODUCT QUANTITY
Occupancy Sensor
2
O2C05-MDW
10
ROOM CONTROL
Leviton Room Control solutions build on the foundation of occupancy sensing to add value and convenience for facilities.
Room controls introduce daylighting capabilities, which takes advantage of natural light entering a space from windows,
skylights and other open spaces. Utilizing daylight to evenly light a room while improving productivity and user experience
diminishes the amount of overhead lighting necessary to light the space.
GOOD SOLUTION
LEVNET RF MULTI-LOCATION SWITCHING
SOLUTION
SOLUTION REQUIREMENTS
PRODUCT QUANTITY
www.leviton.com/les 11
GOOD SOLUTION
IRC 2-ZONE SOLUTION
SOLUTION REQUIREMENTS
PRODUCT QUANTITY
IRC Kit for 2 Zones, 2 Relays - includes IRC, sensor, photocell, and control station
RCD20-102
Photocell, Indoor
ODC0P-00W
12
BETTER SOLUTION
IRC 3-ZONE DAYLIGHTING & DIMMING SOLUTION IRC,
3-Zone
PROBLEM: Room requires manual control of staggered
zones of lights, from the windowed daylighting zone on
back. Additionally, occupants require the flexibility to
manually dim and switch the zones ON and OFF to
Lighting
accommodate temporary needs for presentations, media Control
viewing, etc. in order to comply with conservation codes. Station
SOLUTION REQUIREMENTS
PRODUCT QUANTITY
IRC Kit for 3 Zones, 3 Relays - includes IRC, sensor, photocell, and control station
RCD30-101
Photocell, Indoor
ODC0P-00W
www.leviton.com/les 13
BEST SOLUTION
LEVNET RF ZONAL AND INDIVIDUAL FIXTURE CONTROL
RF Wireless
Receptacle Sensor RF
Receptacle
Fixture
Wireless
Controller
Dual Rocker
Wall Station
Wireless Dimming
Dimming
Sensor Photocell
Photocell
Wall Switch
Receiver
Switch Receiver
Receiver
Relay
Area
Wireless Receiver
Controller
Wireless
Dual Rocker
Sensor
Wall Station
Lighting Control Solutions | Commercial
Dimming
Photocell
Dimming
Photocell Fixture Fixture Fixture Fixture
Controller Controller Controller Controller
PROBLEM: Facility with multiple rooms wants to implement one energy management system as a retrofit. Some overhead
lights should respond to occupancy sensing and daylighting controls as one controlled zone, while other fixtures require
individual manual and sensing controls.
SOLUTION: LevNet RF system components can be combined to create dynamic lighting options for a variety of spaces.
Zones can be designated in rooms by connecting LevNet RF dimmer modules to ganged fixtures, which respond to the
occupancy sensor, and switch signals to dim lighting by groups of lights incrementally further from daylight sources. In large
open spaces where windows are not present, individual fixtures or small groups of fixtures can be switched ON or OFF by
occupancy sensors and manual switching.
• Easy-to-retrofit, energy harvesting technology can be installed and modified to accommodate evolving needs of the space,
significantly reducing labor and material costs
• Create zonal control by assigning one dimmer module to a ganged set of fixtures and an associated switch, or individual
fixture control by placing one line voltage per dimmer module fixture to respond to occupancy sensor signals. The entire
area can be manually controlled ON or OFF by switch for low-cost flexibility.
• Ideal Applications: Schools, college campuses, libraries, municipal buildings, mixed-use commercial and residential spaces
and hospitality
14
SOLUTION REQUIREMENTS
PRODUCT QUANTITY
LevNet RF Fixture Controller
16
WSD05-9D0
www.leviton.com/les 15
CENTRALIZED CONTROL
Total facility control from one access point is the goal of Leviton’s Centralized Control Solutions. Relay panels, including the
EZ-MAX Plus and GreenMAX models, integrate multiple room controls into a single system that reduces troubleshooting,
narrows the scope of maintenance and expedites installation, which translates into significant labor cost savings. With
advanced features such as GreenMAX’s programmable Behaviors, centralized control systems open up new possibilities for
managing energy use while making the facility safer, smarter and more user-friendly.
GOOD SOLUTION
EZ-MAX PLUS RELAY ZONAL CONTROL
Controlled
Receptacles
PROBLEM: More precise energy control is required in
the building, such as programming a school’s daily class
schedule. Low
Voltage
Switch EZ-MAX
SOLUTION: EZ-MAX Plus offers programmed energy Plus
management in an affordable, compact, stand-alone
relay panel system. The system can be easily programmed
to automatically turn lights ON or OFF based on planned
times (open/close) or astronomical clock (sunrise/
Lighting Control Solutions | Commercial
Photocell
sunset). Occupancy sensor and photocell integration
enhance programmed settings with daylight harvesting
and ON/OFF occupancy switching.
SOLUTION REQUIREMENTS
PRODUCT QUANTITY
16
BETTER SOLUTION
EZ-MAX PLUS RELAY—A/V CLASSROOM
Controlled
Receptacles
PROBLEM: Facility seeks to incorporate timing and
astronomical clock control into a facility where Low
overhead lights are designed to be manually controlled Voltage
to accommodate presentations, media viewing, etc. 4-Button
EZ-MAX
Zone 1 Zone 2 Zone 3 Switch Plus
SOLUTION: The EZ-MAX Plus solution allows for modern
schools to accommodate evolving classroom needs.
Many classes now include dynamic visuals requiring the
use of projection screens, TV and computer monitors
Photocell
as presentation tools. EZ-MAX Plus can be programmed
to control the lighting zone at the head of the class
separately from the lights over desks.
SOLUTION REQUIREMENTS
PRODUCT QUANTITY
Photocell*
1
ODC0P-00W
www.leviton.com/les 17
BEST SOLUTION
GREENMAX RELAY CONTROL PANEL CAMPUS SOLUTION
Controlled Controlled
GreenMAX Receptacles
Receptacles
Multi-Tech
Photocell Ceiling 4-Button Multi-Tech
Sensor Digital Ceiling
Switch Sensor
4-Button
Digital
Switch Zone 1 Zone 2 Zone 3 Zone 4
Zone 1 Zone 2 Zone 3
4-Button 4-Button
Digital Digital
Switch GreenMAX
Switch
Multi-Tech Multi-Tech
Ceiling Ceiling
Sensor Controlled Sensor
Photocell Controlled Receptacles
Receptacles
Multi-Tech Multi-Tech
Ceiling Ceiling
Sensor Sensor
PROBLEM: Commercial facility has several rooms that utilize occupancy sensors and daylighting technologies, but does not
require specific zonal controls.
SOLUTION: Installing several GreenMAX panels allows for similar rooms to be controlled from a central location.
Pre-programmed Behaviors can be set to anticipate daily routine patterns of usage, along with circumstances such as
closures and breaks. GreenMAX system offers demand response capabilities for Title 24 compliance.
• Practical solution for large buildings with many smaller rooms, but not requiring numerous zonal configurations
• Centralized control for time-settings; ready to integrate with building automation systems
• Ideal Applications: Office buildings, schools, college campuses, municipal buildings, airports
18
SOLUTION REQUIREMENTS
GREENMAX RELAY SYSTEM COMPONENTS
PRODUCT QUANTITY
Photocell
2
ODC0P-0DW
www.leviton.com/les 19
BEST SOLUTION
GREENMAX ZONAL CONTROL
GreenMAX GreenMAX
Controlled Controlled
Receptacles Receptacles
Photocell
Multi-Tech
4-Button Ceiling
4-Button Digital
Multi-Tech Sensor
Digital Switch
Ceiling
Switch
Sensor
4-Button
Digital
4-Button
Switch
Lighting Control Solutions | Commercial
Digital
Switch
GreenMAX
GreenMAX
MT Ceiling MT Ceiling
Mount OS Mount OS
Photocell
Controlled Controlled
Receptacles Receptacles
MT Ceiling MT Ceiling
Mount OS Mount OS
Key Switch
PROBLEM: Large commercial space has areas that must be controlled independently, and each room has areas that may
need to be segregated by zone for customizable control. The length and amount of wire needed to bring all room controls to
one centralized location would be labor and cost-prohibitive.
SOLUTION: GreenMAX allows large areas, or rooms divided into zones, to be centrally controlled. Pre-programmed Behaviors
can be set in advance to control rooms on common-use settings or for separate circumstances such as closures and breaks.
GreenMAX system offers demand response capabilities for Title 24 compliance.
• Rooms are equipped with photocells and occupancy sensors to achieve optimal daylight harvesting
• Using the sensors and switches allows shorter and less expensive wiring options
• Incorporating smaller panels allows for less wiring and lower installation and maintenance costs
• Centralized control for time-settings; ready to integrate with building automation systems
• Ideal Applications: Office buildings, schools, college campuses, municipal buildings, airports
20
SOLUTION REQUIREMENTS
GREENMAX RELAY SYSTEM COMPONENTS
PRODUCT QUANTITY
Photocell
2
ODC0P-0DW
www.leviton.com/les 21
DISTRIBUTED CONTROL
Flexibility, cost-effectiveness and energy efficiency are the goals of Leviton’s Distributed Control Solutions. Sector Intelligent
Digital Lighting Control Systems and SectorFlex integrates scheduling, daylighting, occupancy sensing, dimming and manual
control into an intelligent digital lighting control system. The Sector system is easy to design, install and program and provides
energy savings and increased occupant comfort and productivity.
BEST SOLUTION
SECTOR BALLAST INDIVIDUAL CONTROL
Sector Relay
Sector
Multi-Tech
Lighting Control Solutions | Commercial
Sector
Sector 5-Button
Multi-Tech Sector
Switch
Ceiling 5-Button
Sensor Switch
Sector
Multi-Tech
Sector Ceiling
Photocell Sensor
Sector
Multi-Tech
Ceiling
Sensor
Sector
Multi-Tech
Ceiling
Sensor
22
PROBLEM: New construction is beginning on a facility that will have multiple uses, and may be configured in different ways in
the future based on changing tenants. Each room will be used in unique ways: there will be some cubicle areas where users
would prefer to control lights directly above and around them, and other areas where overhead lights should be controlled as
one seamless unit.
SOLUTION: The Sector solution includes Sector 1-10V LED drivers, controllers, occupancy sensors, photocells and switches
and a GUI software interface for a scalable solution that serves a variety of facilities. Individual control allows occupants to
control their light from their personal computer, and also frees up a space to be used in various, evolving ways. For example,
a large open space can be built with Sector implemented for a retail application, but in the future easily reconfigured for
smaller offices and shops. The fixtures can be programmed to work together within the newly defined space with a few
clicks using the GUI software.
• Vary zones of light to any scale, large or small, and change at any time without needing to switch out hardware. One
investment saves on numerous material and labor costs, presenting a superior value to facilities
• Sector combines daylighting technologies with occupancy sensing and manual control, offering a solution which
encompasses all major energy-saving technologies: occupancy sensing, dimming and switching, daylight harvesting and
manual overrides
• Ideal Applications: Newly constructed schools, college campuses, office buildings, commercial spaces, shopping malls,
airports and other commercial facilities
Relays
43
SBCS0-L00
Sector Photocell
2
ODC0P-0SW
www.leviton.com/les 23
BEST SOLUTION
SECTOR ZONAL LIGHTING WITH RELAY CONTROL
Sector Relay
Sector
Multi-Tech
Ceiling
Sector Sensor
Photocell
Sector
2-Button Sector
Switch 2-Button
Switch
Sector Sector
Lighting Control Solutions | Commercial
2-Button 2-Button
Sector Bus Switch
Controller Switch
Sector
5-Button
Switch
Sector
5-Button
Switch
Sector
Sector
Multi-Tech
Multi-Tech
Ceiling
Sector Ceiling
Sensor
Photocell Sensor
Sector Sector
Multi-Tech Multi-Tech
Ceiling Ceiling
Sensor Sensor
PROBLEM: Existing facility desires the flexible features of the Sector system to control overhead lighting by zones, but the
building has existing non-Sector ballasts. Replacing all ballasts would be cost-prohibitive.
SOLUTION: The Sector solution contains all of the flexibility and features of Sector into a system that can be implemented
with any 1-10V ballast or load. This makes Sector ideal for retrofit projects where ballasts already exist. Ballasts can later
be upgraded to Leviton Sector ballasts to allow for energy usage tracking. Sector relays allow the integration of the Sector
system without completing an entire overhaul of a structure’s existing ballast systems.
• Controls lighting areas by zones with the ability to add and merge zones as lighting needs evolve
• Contains all of the flexible options of Sector without requiring immediate replacement of existing ballasts
• Ideal Applications: Retrofit applications such as hotels, schools, universities, hospitals, airports, and other pre-existing
structures
24
SOLUTION REQUIREMENTS
PRODUCT QUANTITY
Sector Relay
15
SBCS0-L00
Sector Photocell
2
www.leviton.com/les 25
VERIFEYE SUBMETERING SOLUTIONS
VerifEye Submetering Solutions enhance any application
by allowing facilities to accurately track actual energy
usage. By measuring energy usage over days, weeks and
months, trends can be identified and the effectiveness of
conservation efforts can be proven.
Open Protocol By designing open protocol products and operating systems, Leviton ensures ease of communication with
use of Leviton AMR and DAS equipment. The result is scalable, streamlined solutions that are easy to integrate with new and
existing systems.
Scalable System VerifEye solutions can be implemented as an entire solution or in stages, based on the project and the
customer’s needs for ease and flexibility. Options for future upgrades and additions are available with Leviton’s flexible
solution—no need to purchase an entire new system, adding long-term value and cost savings.
See the VerifEye Submetering Solutions section for more information on product offerings.
26
www.leviton.com/les 27
SAVE ON ENERGY COSTS
Lighting energy consumption typically accounts for 38% of all energy used in today’s commercial facilities. With rising energy
costs and increased code compliance mandates, turning lights OFF in unoccupied spaces is a necessity. One of the best ways
to ensure that energy is not wasted is by installing occupancy sensors. To learn more, visit www.leviton.com/Sensors.
An E Source survey, focusing only on the addition of occupancy sensors, highlights the significant energy savings their
adoption can provide:
Open-Plan Office
(Save 20 to 28%)
Classroom
(Save 40 to 46%)
Conference Room
(Save 22 to 65%)
Sensing Control
Bathrooms
(Save 30 to 90%)
Corridors
(Save 30 to 80%)
Storage Area
(Save 45 to 80%)
According to a Midwest Energy Efficiency Alliance study, their cost-saving potential is considerable:
28
SAVE ON ENERGY CODE COMPLIANCE COSTS
Occupancy and/or vacancy sensors are an integral component of all modern energy codes. Occupancy sensors provide a
very cost-effective means of compliance. They also offer an easy way to achieve higher levels of voluntary certification for
implementation of energy saving measures, resulting in potential income tax credits for building owners or tenants who meet
these “green” standards.
Sensing Control
CALIFORNIA TITLE 24 2013
California Title 24 2013, Part 6, applies to nonresidential and residential high-rise buildings as well as hotel/motel occupancies.
Title 24 compliance is mandatory to legally operating and occupying buildings in California. Key provisions now in effect include:
Area Controls: An occupancy sensor that turns lights OFF within 30 minutes after the space is vacated for all areas enclosed
by ceiling height partitions
Multi-Level Lighting Controls: General lighting for any enclosed space 100 sq. ft. or larger where connected lighting load
exceeds 0.8 watts per sq. ft. for the space and has more than one light source shall have at least one control step that is
between 50% and 70% and allow the power of all lights to be manually turned OFF (Occupancy sensors that switch alternate
rows of lighting fixtures based on occupancy are a possible solution)
Shut-off Controls: For every floor, all interior lighting must have a separate automatic control – an occupancy sensor or some
other device – capable of automatically shutting off the lighting. Occupancy sensor is required for Offices ≤ 250 sq. ft.;
Multipurpose room < 1000 sq. ft.; Classrooms of any size; Conference rooms of any size. Shall allow lights to be manually shut
off regardless of sensor status.
New Single and Low-Rise Residential Structures: Bathroom, garage, laundry room, utility room and outdoor lighting in
single residences as well as lighting in common areas of low-rise residential buildings with four or more dwelling units must
be from high-efficacy luminaires. If luminaires are used in these locations that are not high efficacy, occupancy sensors must
control them. Lighting in other areas of residential buildings that is not from high-efficacy luminaires is only permitted if
controlled by either a dimmer switch or an occupancy sensor.
Demand Responsive Lighting Controls: Buildings >10,000 sq. ft. require automatic demand responsive lighting controls;
uniformly reduce lighting power consumption ≥ 15%; Exception: Non-habitable spaces and spaces <0.5w/sq. ft. Each luminaire
shall be controlled by at least one of the following:
• Manual Dimming • Automatic Daylight Controls • Demand Response Controls
Self-Contained Devices: Requirements for self-contained lighting controls include time switch controls, automatic daylight
controls, dimmer controls, occupancy, motion and vacancy sensing controls.
Receptacle Control: At least 50% of receptacles in hotel and motel guest rooms shall be automatically turned off via sensor,
captive key switches or automatic controls within 30 minutes after the space is vacated.
www.leviton.com/les 29
ABOUT SENSING TECHNOLOGIES
Passive Infrared (PIR)
Infrared occupancy sensors are passive devices designed to detect the movement of heat-emitting bodies. They are installed
to monitor areas where there are no physical obstructions to block the sensor’s field of view.
Ultrasonic (US)
Ultrasonic sensing technology provides highly accurate small-motion detection. Leviton sensors employing ultrasonic
technology are well suited to monitoring areas, especially smaller or narrow ones, with inanimate objects (such as furniture)
that block the line of site and hence are likely to block the field of view of PIR sensors. They are also ideal where more
sensitive detection is required.
Multi-Technology
Multi-technology occupancy sensors combine ultrasonic sensing for maximum sensitivity with PIR technology to prevent
false triggers from air conditioning and corridor activity. These sensors are ideal for large, open areas including office areas
with cubicles, general workspaces, warehouse and storage facilities, cafeterias, and public areas in commercial facilities.
Adaptive Definition
A dedicated internal microprocessor continually analyzes the room environment and adjusts itself automatically. The internal
timer, detection sensitivity and thresholds are automatically adjusted. Once installed, a sensor incorporating adaptive
technology should not require manual adjustment or calibration.
human body
• Require an unobstructed line-of-sight for accurate detection—any
furniture or decorations that block the sensor’s view will prevent
occupant’s movement from being “seen”
• Respond to larger movements than ultrasonic sensors
• Work best in small, enclosed areas with high levels of occupant motion
• Locate PIR sensors with a clear line-of-view of the area to be covered,
perpendicular to the likely movement
30
ABOUT DIFFERENT SENSOR DESIGNS
Sensor Type When to Use
Wall Switch This sensor replaces an existing wall switch. Get both occupancy sensing and manual on/off
switching in a single device.
Wall-Mount For coverage of irregularly shaped areas and those with varying ceiling heights, as well as
narrow hallway and high-bay corridor applications. For detection in spaces outside the field of
view of other occupancy Adjustable swivel neck rotates 80° vertically and 60° horizontally to
allow wall or ceiling mount installation.
Sensing Control
SELECTION & PLACEMENT
Sensors can be mounted in the middle of walls, in corners, or on ceilings. Occupancy sensors must be intelligently placed in
order to ensure that motion is detected throughout an entire space. With a variety of models from which to choose, care
should be taken to select the proper combination of sensors to cover an entire area with motion detection.
www.leviton.com/les 31
WIRELESS SELF-POWERED SENSORS
LevNet RF 902 MHz Wireless Self-Powered Sensors are part of LevNet RF’s complete
line of wireless self-powered solutions. The occupancy sensors have built-in solar
cells that draw on available ambient light within a space to power themselves and can
operate for up to 48 hours in total darkness. The self-powered sensor design also
overcomes the placement and coverage challenges of traditional sensors.
Self-powered sensors enable flexible placement, allowing sensors to be mounted
wherever needed without the complexity of moving or installing new wiring.
moving directly towards the sensor; 360° rotation to fine tune location of solar cells and field-of-view for the most accurate
sensing possible
IDEAL APPLICATIONS
• Retrofits, new construction, restrooms, conference rooms, classrooms, private/executive offices, retail spaces
TOP VIEW
15
LONG RANGE
Top View
10 77°
3 ft 7 ft 25 ft 35 ft 100 ft 150 ft
(1 m) (2.2 m) (7.6 m) (10.7 m) (30.48 m) (45.7 m)
15
Minor Motion
SIDE VIEW
Side View
Major Motion
10 6-8 ft
(2.1 -2.4 m)
0 3 ft 7 ft 25 ft 35 ft 100 ft 150 ft
16 14 11 9 4 3 0 3 4 9 11 14 16 (1 m) (2.2 m) (7.6 m) (10.7 m) (30.48 m) (45.7 m)
WSC12 Field of View (in feet) WSWDR Field of View (in feet)
32
DECORA® WALL SWITCH OCCUPANCY SENSORS
Convenient switch and occupancy sensor combo utilizes Decora® wallplates for sleek aesthetics. Advanced passive infrared
technology provides highly accurate monitoring in a variety of commercial and residential applications. The OSSMD and
OSSMT multi-technology unit combines passive infrared and ultrasonic technologies to provide maximum sensitivity with
immunity to false triggering.
Robust latching
Exclusive dual PIR
mechanical relay
sensors detect IR
signal
Patented adjustable
blinders block
peripheral signals
Vandal-resistant Fresnel
lens for optimal
field of view
www.leviton.com/les 33
DECORA PIR WALL SWITCH OCCUPANCY AND VACANCY SENSORS
COMMERCIAL GRADE+
DESCRIPTION CAT. NO. RATING COVERAGE COLOR*
ODS06-ID Incandescent: 600W @ 120V. LED Fluorescent: 800VA @
Decora PIR Wall Switch Occupancy Sensor W, I
ODS06-IN 120V, 1500VA @ 277V. 50/60Hz, Motor: 1/4 HP @ 120V
Decora PIR Wall Switch Occupancy Sensor Incandescent: 3470W @ 347V. LED Fluorescent: 3470W @
ODS10-I3 W
347V Only Model 347V. 50/60Hz, Motor: 1/4HP @ 347V
W, I, T,
Decora PIR Wall Switch Occupancy Sensor ODS10-ID
G, E, R
Decora PIR Wall Switch Vacancy Sensor ODS10-TD Incandescent: 800W @ 120V. W, I, T
LED Fluorescent: 1200VA @ 120V, 2700VA @ 277V.
Decora PIR Wall Switch Occupancy Sensor- Auto-ON/ For 50/ 60Hz AC only.
ODS10-IQ W, I, E
Auto-OFF Only Model Motor: 1/4HP @ 120V
Decora PIR Wall Switch Occupancy Sensor with
MDS10-ID
Self-Adpative Technology - Lev-Lok Model W, I, T,
Decora PIR Wall Switch Occupancy Sensor 180°, G, E
ODS15-ID
with Self-Adaptive Technology 2100SF
Incandescent: 1800W @ 120V.
Decora PIR Wall Switch Occupancy Sensor with LED Fluorescent: 1800VA @ 120V, 4000VA @ 277V.
ODS15-TD W, I, T
Self-Adaptive Technology - Vacancy Model 50/60Hz.
Motor: 1/4HP @ 120V
Decora PIR Wall Switch Occupancy Sensor with W, I, T,
MDS15-ID
Self-Adaptive Technology - Lev-Lok Model G, E
Sensing Control | Wall Switch
Decora Dual-Relay PIR Wall Switch Occupancy Sensor Primary Relay– LED Fluorescent: 1200VA @ 120V,
with Self-Adaptive Technology. 2700VA @ 277V; Incandescent: 800W @ 120V. W, I, T,
ODS0D-ID
Default setting = Conference Room mode, Secondary Relay– LED Fluorescent: 800VA @ 120V, G, E, R
alternate setting = Classroom mode** 1200VA @ 277V; Incandescent: 800W @ 120V. 50/60Hz.
Incandescent: 800W @ 120V. W, I, T,
Decora PIR Wall Switch with LED Night Light OSSNL-ID
LED Fluorescent: 1200VA @ 120V, 2700VA @ 277V. G, E
Decora PIR Wall Switch with LED Night Light, CA Title 50/60Hz.
OSS10-IN W, I, E
24 - Vacancy Model Motor: 1/8 HP @ 120V
Protective Cage for Wall Switch Sensors OSWWG-POW — — W
RESIDENTIAL GRADE
DESCRIPTION CAT. NO. RATING COVERAGE COLOR*
Decora PIR Wall Switch Vacancy Sensor, Single-Pole IPV02-1L 300W Incandescent/FL Ballast, 150W LED/CFL, W,T
Decora PIR Wall Switch Occupancy Sensor, Single-Pole IPS02-1L 1/6 HP Motor, 2.5Amp Resistive W, I, T
Decora PIR Wall Switch Vacancy Sensor, Single-Pole IPV05-1L 600W Incandescent/LED FL Ballast, 150W LED/CFL,
Z
Decora PIR Wall Switch Occupancy Sensor, Single-Pole IPS05-1L 1/6HP Motor, 5A Resistive
180°,
Decora PIR Wall Switch Occupancy Sensor, Single-Pole
IPS06-1L 600W Incandescent, 150W LED 900SF W
or 3-Way
Decora PIR Wall Switch Dimming Vacancy Sensor,
IPVD6-1L
Single-Pole or 3-Way
600W Incandescent, 150W LED/CFL
Decora PIR Wall Switch Dimming Occupancy Sensor,
IPSD6-1L
Single-Pole or 3-Way
Decora Wall Switch Relay Vacancy Sensor, Single-Pole 180°,
IPV15-1L Z
or 3-Way 1800W Incandescent, 600W LED/CFL, 900SF,
Decora Wall Switch Relay Occupancy Sensor, 1800VA Fluorescent Ballast, 1/2 HP neutral
IPS15-1L required
Single-Pole, 3-Way
Decora Sensor Remote, 120VAC, Manual-ON, Auto-OFF,
IPVOR-1L — —
For use with IPS15 or IPV15 Sensor
DECORA RESIDENTIAL GRADE WALL SWITCH HUMIDITY SENSOR AND FAN CONTROL
DESCRIPTION CAT. NO. RATING COLOR*
600W Incandescent, 150W LED/CFL400VA MLV/Fluorescent,
Humidity Sensor & Fan Control IPHS5-1L W, I, T
1/6 HP (3A) Fan
Z — Comes packaged with three colors: White, Ivory and Light Almond.
34
DECORA MULTI-TECHNOLOGY WALL SWITCH OCCUPANCY AND VACANCY SENSORS
COMMERCIAL GRADE+
DESCRIPTION CAT. NO. RATING COVERAGE COLOR*
Incandescent/Tungsten: 800W @ 120V.
Decora Multi-Technology Wall Switch W, I, T, G,
OSSMT-MD LED Fluorescent: 1200VA @ 120V, 2700VA @ 277V.
Occupancy Sensor with Self-adaptive Technology E, R
Motor: 1/4HP @ 120V, 50/60 Hz
Incandescent/Tungsten: 800W @ 120V.
Decora Multi-Technology Wall Switch Sensor -
OSSMT-TM LED Fluorescent: 1200VA @ 120V, 2700VA @ 277V. W, I, T
Vacancy Model
Motor: 1/4HP @ 120V, 50/60 Hz
Incandescent/Tungsten: 800W @ 120V.
Decora Multi-Technology Wall Switch
OSSMT-MQ LED Fluorescent: 1200VA @ 120V, 2700VA @ 277V. W, I, E
Occupancy Sensor - Auto-ON/Auto-OFF Only Model
Motor: 1/4HP @ 120V, 50/60 Hz
Incandescent/Tungsten: 800W @ 120V.
Decora Multi-Technology Wall Switch Occupancy
OSSMT-M3 LED Fluorescent: 1200VA @ 120V, 2700VA @ 277V, W, I
Sensor - 347V Only Model
1500VA @347V. Motor: 1/4HP @ 120V.
Decora Multi-Technology Wall Switch Occupancy W, I, T, G,
OSSMT-GD
Sensor. No neutral wire required for installation. 180°, E, R
Incandescent/Tungsten: 800W @ 120V. 2400SF
Decora Multi-Technology Wall Switch Sensor with No
OSSMT-GT LED Fluorescent: 1200VA @ 120V, 2700VA @ 277V. W, I, T
Neutral - Vacancy Model
Motor: 1/4HP @ 120V, 50/60 Hz
Decora Multi-Technology Wall Switch Occupancy
OSSMT-GQ W, I, E
Sensor with No Neutral -Auto-ON/Auto-OFF Only Model
www.leviton.com/les 35
DECORA WALL SWITCH VACANCY & OCCUPANCY SENSORS DIMENSIONS
1.35
(33.6)
2.66
4.11 (67.5)
(104.4)
1.75
(44.5)
1.35
(33.6)
2.66
4.11 (67.5)
(104.4)
1.75
(44.5)
OSSMT-MD/OSSMT-GD/OSSMT-GT/ OSSMD-MD
OSSMT-GQ, MSSMT-GD Multi-Tech Dual Relay Sensor
Multi-Technology Sensor
2.72 2.72
2.72 4.13
4.13 (69) (69)
4.13 (69) (104.8)
(104.8) (104.8)
1.75 1.75
1.75
(44.5) (44.5)
(44.5)
36
DECORA WALL SWITCH VACANCY & OCCUPANCY SENSOR FIELDS OF VIEW
TOP VIEW TOP VIEW TOP VIEW
40 30 15
30 20
6
15 0
0
6
0
20
15
15 SIDE VIEW
30
SIDE VIEW 5
5 4
4
0 0
30 0 8 15 27 30
Major Motion, IR 0 20 40
Minor Motion, IR
40
Major Motion, PIR Major Motion, U/S
SIDE VIEW
5 Major Motion, PIR Major Motion, U/S
4
0
0 15 40
Minor Motion = Dual Technology coverage. This also represents the IPSD6/IPVD6,
maximum ultrasonic range coverage.
OSSXX-ID/ODSXX-ID IPS02/IPV02/IPS05/IPV05,
Field of View (in feet)
ODSXX-ID OSSMT Field of View (in feet) IPS06, IPS15/IPV15 (in feet)
4’
10’
2’
6’ 0’
2'
0’ 4'
6'
6’ 8'
0’
15’
2'
7 SIDE VIEW
4'
4
6'
0
8'
0 5 8 15 27 30 10' 8' 6' 4' 2' 0' 2' 4' 6' 8' 10'
30
30 30
20
20 20
10 10 10
0 0 0
10 10 10
20 20
20
30 30
30
www.leviton.com/les 37
PROVOLT SELF-CONTAINED SENSORS — DAYLIGHT HARVESTING CAPABLE MODELS
The Leviton Provolt Series of Occupancy Sensors features self-contained line-voltage occupancy sensors and photocells in
one unit. The integrated design alleviates the need for separate power pack, occupancy sensor, and photocell wiring making
it a low-cost and efficient energy management solution for new construction and retrofits. For true daylight harvesting
applications, integrated photocells provide consistent daylight design levels by actively switching the connected load(s)
ON and OFF in response to available natural light to maximize energy savings. The Provolt Series also includes a line of
vacancy sensors that features selfcontained line-voltage vacancy sensing technology.
38
PROVOLT SELF-CONTAINED CEILING MOUNT OCCUPANCY SENSORS —
DAYLIGHT HARVESTING CAPABLE
DESCRIPTION CAT. NO. COVERAGE COLOR INPUT VOLTAGE, RATING
Provolt Line Voltage Ceiling Mount U/S Occupancy ODC20-UDW 277V, 50/60Hz
2000SF,
Sensor w/Integrated Photocell, Extended Range O2C20-UDW 5A, Electronic Ballast,
120-277V
Lens installed (Dual Relay) 800W/VA, Tungsten Ballast,
Provolt Line Voltage Ceiling Mount Multi-Technology ODC05-MDW 1/3 HP Motor
500SF,
Occupancy Sensor w/Integrated Photocell, Extended O2C05-MDW
120-277V 230V, 50Hz
Range Lens installed (Dual Relay)
W 6A/6AX, Electronic Ballast,
Provolt Line Voltage Ceiling Mount Multi-Technology ODC10-MDW
1000SF, Magnetic Ballast, 1200W/VA,
Occupancy Sensor w/Integrated Photocell, Extended O2C10-MDW
120-277V 1/3 HP Motor
Range Lens installed, Mid-Range Lens included (Dual Relay)
Provolt Line Voltage Ceiling Mount Multi-Technology ODC20-MDW 277V, 50/60Hz
2000SF,
Occupancy Sensor w/Integrated Photocell, Extended O2C20-MDW 5A, Electronic Ballast,
120-277V
Range Lens installed, Mid-Range Lens included (Dual Relay) 1200VA, 1/3 HP Motor
ODC20-MDW
www.leviton.com/les 39
FIELD OF VIEW FOR PROVOLT SELF-CONTAINED CEILING-MOUNT SENSORS
PROVOLT SERIES INFRARED SENSORS
TOP VIEW TOP VIEW TOP VIEW
15
20
12
10
10
5 5
0
0 0
5
10
10
15
12 SIDE VIEW
20
0
12 9 7 5 3 0 3 5 7 9 12 20 15 11 9 5.6 3 0 3 5.6 9 11 15 20 30 25 20 15 10 5 0 5 10 15 20 25 30
11.5
11.5
8.5
8.5
8.5
11.5
8.5
11.5
5 0 10 20 0
17 23 23 17 17 23
TOP VIEW
16
11.5
11.5
16
0
32 22.5 22.5 32
ODC20-UDW, O2C20-UDW
40
FIELD OF VIEW FOR PROVOLT SELF-CONTAINED CEILING-MOUNT SENSORS
PROVOLT SERIES MULTI-TECHNOLOGY SENSORS
TOP VIEW
20
TOP VIEW
11.5 20
8.5
11.5
8.5
0
0
8.5 8.5
11.5 11.5
0 0
0 3 5.6 9 11 15 20 23
20
17
15 11 9 5.6 3 0 3 5.6 9 11 15
17
20
23
17 23
TOP VIEW
15
TOP VIEW
10
20
16
5
11.5
0
5
11.5 10
8.5
15
20 SIDE VIEW
Major Motion, IR
20
Minor Motion, Ultrasonic
SIDE VIEW Major Motion, Ultrasonic
8
0
20 15 11 9 5.5 3 0 3 5.5 9 11 15 20
32 22.5 22.5 32
30 25 20 15 10 5 0 5 10 15 20 25 30
www.leviton.com/les 41
SELF-CONTAINED OCCUPANCY SENSORS
SPECIFICATIONS & FEATURES
• Sensor and switching relay combined in a single, self-contained unit—no control
unit (power pack) required
• Switching control of LED drivers
• Ambient light override option prevents lights from turning on when there is ample
natural light
• ODC and ODW Power Base Combo Sensors combine sensors with the OPB15
Power Base Adaptor to convert low voltage sensors into self-contained line
voltage sensors for immediate energy savings
• Adjustable delayed-OFF-time settings from 20 seconds (for test mode) to
15 minutes
• Small, unobtrusive self-contained unit
Ideal Uses
• Storage areas, small bathrooms, copy rooms, and a variety of small spaces ODC0S-I1W
without wall switches
• UL/cUL Listed
• CA Title 24 compliant and meets ASHRAE Standard 90.1 2010 requirements
• Backed by a limited five-year warranty
42
LINE VOLTAGE SENSORS WITH FACTORY INSTALLED OPB15 POWER BASE ADAPTOR
5.0
TESTING & CODE COMPLIANCE (127)
• UL/cUL Listed
• CA Title 24 compliant and meets ASHRAE Standard 90.1 2010 requirements
• ARRA Compliant
• Backed by a limited five-year warranty
5.50
(139.7)
LINE VOLTAGE WALL MOUNT SENSORS
COMMERCIAL GRADE
DESCRIPTION CAT NO. RATING COVERAGE COLOR ODWxx
Line Voltage Wall Mount
Multi-Technology
ODW12-MDW 1200SF 2.80
Occupancy Sensor with
(71.1)
Power Base Combo
Line Voltage Wall Mount
PIR Wide View
ODWWV-IDW 115°, 2500SF
Occupancy Sensor with 15A, 120V Incandescent;
Power Base Combo 15A, 277V Fluorescent
White
Ballast; Motor: 3/4 HP @
www.leviton.com/les 43
SELF-CONTAINED PIR FIXTURE-MOUNT HIGH-BAY & INTEGRAL LUMINAIRE OCCUPANCY SENSORS
SPECIFICATIONS & FEATURES
PIR Fixture-Mount High-Bay Occupancy Sensor
• Universal unit includes interchangeable lenses for 360° high-bay and 360° low bay at no additional cost
• Cold storage models for applications as low as -40° F and 480V models available in non-neutral versions
• Switching control of LED drivers
• Mounts directly to industrial-style fluorescent luminaires or electrical junction box
• Self-contained PIR sensor and relay turn individual fixtures ON/OFF based on occupancy
• Up to 40 ft mounting height for quick and easy installation 42” leads included
• Relay uses zero-crossing circuitry for enhanced reliability and long-life operation
• Bright green LED status indicator blinks to signify that the sensor is functioning properly
• Delayed-OFF time adjustment from 30 sec to 20 min OSFHU
• Offset Adaptor Accessory snaps into 1/2" knockout to position sensor below fixture body for improved
field of view with deep-body fixtures
Infrared Fixture Mount Integral Luminaire Occupancy Sensor
• Easy installation with longer 21” leads allows for easy connection to any ballast eliminating the need to splice
additional wiring
• Integrated photocell prevents lights from turning ON when room is illuminated by natural light for maximum energy savings
• 8’ to 10’ mounting heights
• Adjustable Time Delay and Light Level dials located on sensor housing for easy access
Sensing Control | Line Voltage
Ideal Uses:
• OSFHU: Commercial facilities with high ceilings, including warehouses, manufacturing, cold storage, and others.
• OSF10: Task lighting, cabinet lighting, cubicles, small bathroom lighting.
OSF10
COMMERCIAL GRADE†
DESCRIPTION CAT. NO. RATING COVERAGE
Fluorescent: 800VA @ 120V,
OSFHU-ITW (120-230-277-347V)
Fixture Mount High-Bay PIR Occupancy 1200VA @ 277V, 1500VA @ 347V,
OSFHU-CTW (cold storage)
Sensor with Two Interchangeable Lenses 2400VA @ 480V (OSFHU-x4W
OSFHU-I4W (480V)
for 360° High-Bay, 360° Low Bay models only). 50/60Hz.
OSFHU-C4W (cold storage)
Motor: 1/4 HP @ 120V
Fixture Mount High-Bay PIR Occupancy 360° high-bay lens - 2:1 spacing
Input: 20mA, Output: 120mA,
Sensor with Two Interchangeable Lenses OSFHP-ILW (24V) to mounting height under 20 ft.
HVAC: 1A, 30VDC
and Light Sensor, Low Voltage and 1.5:1 spacing to mounting
OSFHP-ITW (120-230-277-347V) height @ 40 ft 360° low-bay lens
Fixture Mount High-Bay PIR Occupancy OSFHP-I4W (240-480V) - 2:1 spacing to mounting height
Sensor with Two Interchangeable Lenses Dual Relay: Fluorescent: 800VA @ 120V, @ 8 ft. to 20 ft.
and Light Sensor OSFHD-ITW (120-230-277-347V) 1000VA @ 230VAC, 1200VA @
OSFHD-CTW (cold storage) 277VAC, 1500VA @ 347VAC,
2000VA @ 480VAC, 50/60Hz.
Fixture Mount High-Bay PIR Occupancy Motor: 1/4 HP @ 120V
OSFHD-IAW (120-230-277-347V)
Sensor with Two Interchangeable Lenses
OSFHD-CAW (cold storage)
and Alternating Relay
800VA @ 120VAC Ballast
Surface Mount PIR High Bay 1200VA @ 277VAC Ballast
OSFHS-ITW 55ft., 7 ft side @ 30 ft high
Occupancy Sensor 1500VA @ 347VAC Ballast;
Motor: 120V @ 1/4 HP
OSF10-I0W (120-230-277V)
Incandescent: 598W @ 120V.
OSF10-IUW 240VDC
Integral Luminaire Fixture Mount PIR Fluorescent: 800VA @ 120 VAC, 360°, 1:1 spacing to mounting
OSF10-PPW (power pack)
Occupancy Sensor 1000VA @ 230VAC, 1200VA @ height up to 8’
(120-230-277V)
277VAC 50/60Hz.
OSFCA-36W (36” connection cable)
OSFLN-00W (High-Bay Lens)
Lenses for High-Bay Sensors
OSFLN-00B (Low-Bay Lens)
— —
Offset Adaptor Accessory for Fixture- OSFOA-00W
Mount High-Bay Occupancy Sensor OSFLO-00W
— —
Protective Cage for High-Bay Sensors OSFCG-00W — —
Agency Listings & Code Compliance: UL/cUL Listed and CA Title 24 Compliant * Available in White only. Consult with factory for 208, 220, 230 and 240V models.
44
CEILING MOUNT MULTI-TECHNOLOGY OCCUPANCY SENSORS
These advanced motion sensors combine infrared and ultrasonic technology for highly accurate monitoring without false
triggers. All-digital self-adjusting technology provides "install and forget" solution for automatic lighting control. Available in
a variety of coverage patterns to suit many applications. Use with Leviton Power Pack.
16
11.5
11.5
8.5 11.5
8.5
0 0 0
8.5
8.5
11.5 11.5
11.5
16
20
20
20
0 0 Minor Motion, IR
0 3 5.6 9 11 15 20 20 15 11 9 5.6 3 0 3 5.6 9 11 15 20 20 15 11 9 5.5 3 0 3 5.5 9 11 15 20
17 23 23 17 17 23
Minor Motion, IR Major Motion, IR32 22.5 22.5 32
OSC05-M0W Field of View (in feet) OSC10-M0W Field of View (in feet) OSC20-M0W Field of View (in feet)
Minor Motion, IROSC10-M0W Major Motion, IR Minor Motion, Ultrasonic
OCS05-M0W
• Ultrasonic sensing for maximum range and sensitivity combined with accurate small-motion
detection
• Self-adjusting settings continuously analyze and adjust sensitivity, timer operation, and air
current compensation for reliable, long-term performance OSC05-U0W
• Ambient light override to prevent lights from turning on when there is ample natural light
• Manual delayed-off-time settings of 30 seconds to 30 minutes
1.34 (34.0)
• Self-adjusting delayed-off time interval settings for 30 seconds to 30 minutes.
Compensates for real-time occupancy patterns—preventing unnecessary ON/OFF switching
• Non-volatile memory preserves all automatic and manual settings during power outages
Physical
• Small, unobtrusive unit blends in with any décor 4.20
(106.7)
• Fast, simple installation using 4 color-coded low-voltage wires and a single mounting post
Sensing Control | Low Voltage
11.5 16
8.5 11.5
11.5
8.5
0 0
0
11.5
8.5 8.5
16
11.5 11.5
5 0 10 20 0 0
17 23 23 17 17 23 32 22.5 22.5 32
Minor Motion, IR
OSC05-U0W Field of View (in feet) OSC10-U0W
Minor Motion, IR Field of View (in feet)
Major Motion, IR OSC20-U0W Field of View (in feet)
OSC10-U0W
Major Motion, IR Minor Motion, Ultrasonic OSC20-U0W
OSC05-U0W
Minor Motion, Ultrasonic Major Motion, Ultrasonic
Major Motion, Ultrasonic
46
CEILING MOUNT PIR OCCUPANCY SENSORS
1.55
SPECIFICATIONS & FEATURES (39.4)
Functional
• Self-adjusting settings continuously analyze and adjust sensitivity, timer operation, and
long-term performance
• Isolated relay supports HVAC or other Class 2 low voltage signals
• Supports both 24VAC/VDC power supplies 4.20
(106.7)
• Ambient light override prevents lights from turning on when there is ample natural light
• Manual delayed-off-time settings of 30 seconds to 30 minutes
• Self-adjusting delayed-off-time interval settings for of 30 seconds to 30 minutes.
Compensates for real-time occupancy patterns—preventing unnecessary on/off switching
• Non-volatile memory preserves all automatic and manual settings during power outages OSC04-I0W
Physical
• Small, unobtrusive unit blends in with any décor
• Fast, simple installation using 4 color-coded low-voltage wires and a single mounting post
• Compatible with Wiremold® surface raceways for mounting to hard ceilings
Ideal Uses
COMMERCIAL GRADE
DESCRIPTION CAT. NO. COVERAGE COLOR
PIR Ceiling Mount Occupancy Sensor OSC04-I0W 360°, 450SF
Off-White
PIR Ceiling Mount Occupancy Sensor OSC15-I0W 360°, 1500SF
PIR Ceiling Mount Occupancy Sensor with Isolated Relay OSC04-RIW 360°, 450SF
White
PIR Ceiling Mount Occupancy Sensor with Isolated Relay OSC15-RIW 360°, 1500SF
Power Base Adaptor OPB15-0DW
-
Cosmetic Adaptor OPBCA-00W -
Protective Cage for Ceiling Mount Sensors ODCCG-000 Off-White
NOTE: Use low-voltage wiring to connect sensors to OSPXX Power Pack.
5 10
0 0 Minor Motion, IR
Major Motion, IR
12
20
SIDE VIEW
8
SIDE VIEW
8
0
9 7 5 3 0 3 9
20 15 11 9 5.6 3 0 3 5.6 9 11 15 20
12 5 7 12
OSC04-I0W Field of View (in feet) OSC15-I0W Field of View (in feet)
• Self-adjusting settings continuously analyze and adjust sensitivity, timer operation, and
4.12
air current compensation for reliable, long-term performance (104.6)
• Ambient light override to prevent lights from turning on when there is ample natural light
• Manual delayed-off-time settings of 30 seconds to 30 minutes 3.67
(93.2)
• Self-adjusting delayed-off-time interval settings of 30 seconds to 30 minutes.
Compensates for real-time occupancy patterns, preventing unnecessary on/off switching
Sensing Control | Low Voltage
• Non-volatile memory preserves all automatic and manual settings during power outages
• Fast, simple installation using 3 color-coded low-voltage wires and a single mounting post 5.50
(139.7)
Ideal Uses
• Conference rooms, stairwells, high-ceiling rooms, open areas, storage rooms, and
classrooms—including corner mounting in a variety of applications
2.80
TESTING & CODE COMPLIANCE (71.1)
• CUL/US Certified
OSW12-RMW
• Meets ASHRAE Standard 90.1 2010 requirements Field of View (in feet)
• Backed by a limited five-year warranty TOP VIEW
58
Wall Mount
16
Multi-Technology OSW12-M0W Off-White 11.5
Occupancy Sensor 0
OSW12-M0W
Minor Motion, IR
Major Motion, IR
48
INFRARED INDOOR WALL MOUNT/CEILING OCCUPANCY SENSORS 4.12
(104.6)
Advanced PIR technology for highly accurate monitoring. All-digital self-adjusting
technology provides an "install and forget" solution for automatic lighting control.
Use with Leviton Power Pack. 3.67
(93.2)
SPECIFICATIONS & FEATURES
• Self-adjusting settings continuously analyze and adjust for optimum performance 5.50
(139.7)
• Isolated relay supports HVAC or other Class 2 low voltage signals OSWxx-RIW
• Supports both 24VAC/VDC power supplies
• Adjustable swivel neck rotates 80° vertically and 60° horizontally. Can be used for ceiling
or wall mounting 2.80
(71.1)
• Ambient light override prevents lights from turning on when there is ample natural light
• Manual delayed-off-time settings of 30 seconds to 30 minutes 4.12
(104.6)
• Self-Adjusting delayed-off-time interval settings for 30 seconds to 30 minutes.
Compensates for real-time occupancy patterns—preventing unnecessary ON/OFF switching
• Non-volatile memory preserves all automatic and manual settings during power outages
• Fast, simple installation using 3 color-coded low-voltage wires and a single mounting post OSWxx-I0W
Ideal Uses 5.50
garages, storage rooms, and rooms with pendant fixtures. Also ideal for corner mounting
• OSWHB-I & OSWLR-I: monitoring long, narrow spaces such as warehouse aisles,
hallways, closets, and storage areas. Also ideal for corner mounting
2.80
TESTING & CODE COMPLIANCE (71.1)
• CUL/US Certified • Meets ASHRAE Standard 90.1 2010 requirements • Backed by a limited five-year warranty
Field of View (in feet)
COMMERCIAL GRADE
TOP VIEW
DESCRIPTION CAT. NO. COVERAGE COLOR 58
Wall Mount PIR Wide-View
OSWWV-I0W 115°, 2500SF
Occupancy Sensor
Wall Mount PIR High-Bay 55 ft., 7 ft. wide
OSWHB-I0W Off-White 29
Occupancy Sensor @ 30 ft. high
Wall Mount PIR Long-Range 100ft., 110º
OSWLR-I0W
Occupancy Sensor @ 10ft. high 0
Wall Mount PIR Wide-View
OSWWV-RIW 115°, 2500SF
Occupancy Sensor with Isolated Relay
Wall Mount PIR High-Bay 55ft., 7ft wide
OSWHB-RIW White 29
Occupancy Sensor with Isolated Relay @ 30ft. high
Wall Mount PIR Long-Range 100ft., 110°
OSWLR-RIW
Occupancy Sensor with Isolated Relay @ 10ft. high 58
3.5
0 0
3.5
OSWWV-I0W
0
0 3 13 25 52
0 14 42 71 100
OSWLR Field of View (in feet) OSWHB Field of View (in feet)
OSWHB-I0W
OSWLR-I0W www.leviton.com/les 49
OCCUPANCY SENSOR POWER PACKS 3.66
Power packs provide power for occupancy sensors as well as load (93.0)
switching circuitry. A Leviton Power Pack is required with any low
voltage occupancy sensor. Add-A-Relay units can be used to ex-
pand control capability.
50
Add-A-Relay
• Expands power pack load capacity by functioning as a supplementary relay
• Provides ability to switch loads in different voltage systems
• Compatible with electronic ballasts
• Same compact size and mounting features as Power Pack
• Zero-crossing switching circuitry for outstanding durability
Nipple Adaptor
• Simplifies the connection of an occupancy sensor to the low-voltage side of a power pack mounted inside a fluorescent
ballast cavity
• 1/2" conduit lock nut included with all power packs
POWER PACKS
COMMERCIAL GRADE POWER
POWER CONTROL SUPPLY
www.leviton.com/les 51
SELF-CONTAINED POWER BASE ADAPTOR
• Patented design converts Leviton low voltage ceiling sensors to line voltage
• Ideal for both existing buildings with limited access to low-voltage wiring and
new constructions with line-voltage circuiting only.
• Mounts easily in standard 2.125" deep x 4" octagon or 2.125" deep x 4" square 4.50
electrical box with a 2-gang mud ring; flying leads provide fast line voltage (114.3)
connections
• Two-piece terminal block provides fast, easy low-voltage connections to the sensor
• Relay uses zero-crossing circuitry for enhanced reliability and long-life operation
NEUTRAL (WHITE)
LOAD
HOT (BLACK)
120-277V LOAD (BLUE)
52
www.leviton.com/les 53
OUTDOOR MOTION SENSORS 9.16
Passive Infrared (PIR) outdoor motion sensors provide outstanding value in (232.7)
security lighting, as well as convenience, safety and energy savings for a wide
range of commercial and residential applications.
5.36
SPECIFICATIONS & FEATURES (136.1)
15 minutes
• Provides automatic, test and continuous modes. Test mode simulates
automatic operation with short delayed-OFF-time for easy adjustments.
Continuous mode enables manual override for constant
"lights ON" operation
(when used with standard ON/OFF switch) 50 50
COMMERCIAL GRADE
DESCRIPTION CAT. NO. RATING COVERAGE COLOR
Outdoor PIR Motion Sensor PS200-10
200°
Outdoor PIR Motion Sensor with Dual Floodlight Lampholder PS200-1F
Incandescent: 1000W @ 120V. For 60Hz AC only
Outdoor PIR Motion Sensor PS110-10
110°
Outdoor PIR Motion Sensor with Dual Floodlight Lampholder PS110-1F
Outdoor PIR Motion Sensor PS200-70W
277VAC, 60Hz. 7.22 incandescent, 5A ballasts. White
Outdoor PIR Motion Sensor with Dual Floodlight Lampholder PS200-7FW
200°
Outdoor PIR Motion Sensor PS200-40W
220-240VAC, 50/60Hz. 10A incandescent, 5A ballasts.
Outdoor PIR Motion Sensor withDual Floodlight Lampholder PS200-4FW
Outdoor PIR Motion Sensor PS110-70W
277VAC, 60Hz. 7.22 incandescent, 5A ballasts. 110°
Outdoor PIR Motion Sensor with Dual Floodlight Lampholder PS110-7FW
RESIDENTIAL GRADE
DESCRIPTION CAT. NO. RATING COVERAGE COLOR
Outdoor PIR Motion Sensor RS110-10W
Incandescent: 500W @ 120V. For 60Hz AC only 110° White
Outdoor PIR Motion Sensor with Dual Floodlight Lampholder RS110-1FW
54
PHOTOCELLS
Leviton’s Photocell sensors precisely monitor either
task or ambient light levels. As part of a Leviton energy
management system, photocells work with other
components in the system to automatically adjust light
levels to a user-defined level. Photocells are most
suitable for installation in rooms with windows and open
spaces receiving substantial ambient light.
Daylight Harvesting
Rules of Operation
Measured light level = Light Maintain Level Action: Output to lights remains constant
Measured light level < Light Maintain Level Action: Lights are brightened
Measured light level > Light Maintain Level Action: Lights are dimmed
Energy
Savings
Footcandles Begin
Light
Maintain Perceived
Level Light
Level
Min.
Light
Level
6AM 8AM 10AM NOON 2PM 4PM 6PM
www.leviton.com/les 55
SPECIFICATIONS & FEATURES
• Indoor photocells are designed with a flat Fresnel lens • PCIND indoor photocell with 60° clear Fresnel lens is
that looks downward in a 60° cone of reference to default setting = 75-800FC sensing range; can be field
measure actual light on the work surface, and reducing adjusted to 800FC max sensing range; PCIND should be
the influence of stray light striking the photocell from mounted to the ceiling, facing down
nearby windows or incidental side lighting • PCIND-0SV side view photocell for applications where
• Outdoor photocells are IP54 rated to guarantee ultimate ceiling mounting is required yet the view should be of
protection from dirt, dust, oil and other non-corrosive the lighting entering the space through a window; or,
material for installation to the wall of skylights where the view
• Measures light from any source in the visible spectrum should be up into the skylight; default setting = 0-3FC
within a 60º cone or 180º angle of response depending sensing range; can be field configured with a jumper for
on the model a 3FC, 30FC, 300FC, or 600FC max sensing range
• Constant lighting at the optimal level for greater visual • PCOUT outdoor photocell is enclosed in a weatherproof
comfort and acuity, which contributes to improved housing with a visor for shading and lens protection;
productivity default setting = 50-750FC sensing range
• Provides convenient, automatic hands-free daylight • PCOUT-0SV side view photocell for applications where
harvesting when integrated with Leviton lighting control wall mounting is required yet the view should be of the
products lighting entering the space through a top/side and/or
• Lowers electric bills by reducing usage of lighting where face of the photocell; reference placement diagrams;
ambient natural light is also present default setting = 0-3FC sensing range; can be field
configured with a jumper for a 3FC, 30FC, 300FC, or
Sensing Control | Photocells
PHOTOCELLS
ORDERING INFORMATION
CAT. NO. DESCRIPTION LENS SENSING RANGE
ODC0P-00W Photocell
ODC0P-S0W Switching Photocell
Clear 1-1600FC
ODCOP-D0W Dimming Photocell
PCCxx-00W Line Voltage Photocell
PCIND-000 Indoor Photocell Fresnel 75-800FC
PCIDN-0SV Indoor Side View Photocell 3, 30, 300 or 600FC
Clear Hood
PCOUT-000 Outdoor Photocell 50-750FC
PCOUT-0SV Outdoor Side View Photocell Diffuse 0-300FC
PCATR-000 Atrium Photocell 215-2690FC
Dome/Frost
PCSKY-000 Skylight Photocell 1,076-8,072FC
56
www.leviton.com/les 57
LevNet RF™ is Leviton’s family of self-powered radio frequency wireless products.
Self-powered technology allows LevNet RF Transmitters (i.e., occupancy sensors and switches) to operate without external
power or batteries. Self-powered Transmitters receive power from the motion of a switch actuation, light on a solar cell or
temperature differentials in the environment for a true zero-maintenance self-powered device. Operating in the 902 MHz
band provides minimal competing traffic and greater transmission range than other technologies.
PRODUCT OVERVIEW
There are two main types of LevNet RF Products: Transmitters and Receivers.
Transmitter, such as a switch, generates a wireless RF control signal (e.g., “ACTUATE RELAY”). All transmitters are self-
powered products which can be located anywhere and send transmission signals. Transmitters are available in Occupancy
Sensor, Control Extender, Decora Rocker Self-Powered Switch and Handheld Remote varieties.
Receiver receives a control signal from a Transmitter and performs the appropriate action (e.g., activate or deactivate the
relay). All Receivers are connected to a power source and a load which the Receiver then operates when the RF signal is
received. Receivers are available in Decora Rocker Wall Switch, Relay Power Pack, Receptacles and Area and Fixture Controller
styles.
• Requires no new wiring and installs in ¼ the time of hardwired sensors, translating into faster turnaround and reduced costs
• With no batteries to replace and no maintenance to perform, plus annual energy savings and rebates that can total up to
80% in reduced costs, LevNet RF revolutionizes efficiency and savings
• Lowest power consumption of any RF device with less than one Watt per device used annually, saving approximately 70%
over other RF devices
• California Title 24 2013 and ASHRAE Standard 90.1 2010 compliant
• LevNet RF is the only energy harvesting wireless solution that fulfills LEED requirements to earn LEED points for both wireless
control and no battery.
* Installation time per device: 45-50 minutes for hardwire vs. 10-15 minutes for wireless devices
58
HOW TO PUT IT ALL TOGETHER
TIP: A good way to visualize your wireless system is to imagine that the “wires” connecting each device are invisible wires or “unique addresses.”
LEVNET RF LEVNET RF
LOADS RECEIVERS TRANSMITTERS
Switching
Commercial Self-Powered
Lights Occupancy Sensor
Wall Switch
Reciver
Control
Signal
Up To
Dimming 150 ft.
Commercial 1-10 V
Lights Area Controller,
20A
Switching
Control
Signal
Up To
Switching
Switching
RF Receptacle
Television Continuously ON
STEP Determine what LOADS you want to control — lighting, HVAC, lamp, TV, etc.
1
www.leviton.com/les 59
LevNet RF Wireless Self-Powered Solutions
Frequency 902 MHz
Range 50-150 feet (Design to 75 feet)
Listings FCC Certified for Wireless Communication (U.S.), I.C. Certified (Canada)*
Warranty Limited 5-year
Mode Presentation
Time Delay 2 min (test); 10, 20, 30 min
General Duty: 10A
LED: 400W @ 120V
Incandescent: 800W @ 120V
Load Rating
Fluorescent Ballasts: 1200VA @ 120V, 2700VA @ 277V
Motor: 1/4 HP Load @ 120V
For non-neutral models: 25W minimum load required (reduce range by 15’)
Additional Listings ETL/cETL: UL508, CA Title 24 Compliant, CAN/CSA C22.2 #14
All WSS20 models ship with a Color Change Kit which includes a White, Ivory and Light Almond faceplate.
POWER PACK
60
CONTROL EXTENDER
CONTROL EXTENDER
WSTLT-9D0
Communicates with receivers that control virtually any ON/OFF device
RF RECEPTACLE
www.leviton.com/les 61
TRANSMITTERS
Sensors
HANDHELD
SINGLE ROCKER DUAL ROCKER
4-BUTTON
DECORA™ WALL STATION* DECORA™ WALL STATION*
REMOTE
WSS0S-S9x WSS0S-D9x
WSS0S-R9W
62
LEVNET RF WIRELESS SELF-POWERED SOLUTIONS
WIRELESS SELF-POWERED SENSORS
DESCRIPTION CAT. NO.* COVERAGE COLOR
LevNet RF 902 MHz Self-Powered Wireless Low
WSC12-M9N 360°, 1200SF
Profile PIR Ceiling Mount Occupancy Sensor
W
LevNet RF 902 MHz Self-Powered Wireless PIR Wall
WSWDR-H9W 1600/2200 SF
Mount Occupancy Sensor
WALL STATIONS
CONTROL EXTENDER
DESCRIPTION CAT. NO. COLOR
LevNet RF 902 MHz Control Extender, 100-277 VAC WSTLT-9D0 W
RF RECEPTACLE
DESCRIPTION CAT. NO. COLOR
LevNet RF 902 MHz Split Duplex TR Receptacle Receiver, top controlled WSG15-S9W
W, I, T
LevNet RF 902 MHz Duplex Receptacle Receiver, dual controlled WSG15-D9W
www.leviton.com/les 63
LUMINA™ RF
Lumina™ RF offers a low-cost wireless energy management solution for fast and simple installation at a fraction of the price
of traditional wireless interfaces. Business owners with multiple locations such as franchises and chains benefit from free
multi-location control with no access or control fees. The Lumina Gateway is a self-contained wireless automation controller
with remote capabilities that combines traditionally separated components into a single, ready-to-go boxed solution.
64
LUMINA RF WIRELESS LOAD CONTROL -
5A AND 30A MODULES
• Used for high current applications like water heaters, pool pumps
and fountains
• Self-contained enclosure
• No local control without a magnet
www.leviton.com/les 65
ORDERING INFORMATION
DESCRIPTION CAT. NO. COLOR
Lumina Gateway Hub and setup software 74A00-1 Black
Lumina RF Wall Mount Motion Sensor LURMD-00W
Lumina RF Wall Mount Window/Door Sensor LURDW-00W
White
Lumina RF Ceiling Mount Self-Powered PIR Occupancy Sensor, 450 SF ZSC04-IXW*
Lumina RF Ceiling Mount Self-Powered PIR Occupancy Sensor, 1550 SF ZSC15-IXW*
White, Ivory,
Lumina RF Decora Wall Switch, 2.4GHZ wire-in receiver, 120-277VAC, 50/60 Hz ZSS10-NXZ*
Light Almond
15 Amp Plug-In Load Control Module 89A00-1ZB White
5A Wireless Load Control Module 73A00-3ZB
-
30A Wireless Load Control Module 73A00-4ZB
Omnistat2 Wireless Single-Stage Conventional & Heat Pump RC-1000BLZB Black
Omnistat2 Wireless Single-Stage Conventional & Heat Pump RC-1000SLZB Silver
RC-1000WHZB
Lumina RF Universal Thermostat RC-2000WHZB White
RC-1500WHZB
Room Control | Lumina™ RF
Omnistat2 Wireless Multi-Stage & Heat Pump w/humidity control RC-2000BLZB Black
Omnistat2 Wireless Multi-Stage & Heat Pump w/humidity control RC-2000WHZB White
Omnistat2 Wireless Multi-Stage & Heat Pump w/humidity control RC-2000SLZB Silver
OmniTouch 7 Touchscreen 99A00-001 White
OmniTouch 7 Touchscreen 99A00-002 Black
Indoor/Outdoor Mini Dome IP Camera 68A11-001 White
Lumina Mobile App for iOS and Android - free in iTunes and Android stores - -
*x = Contact factory for a (A) ARRA compliant product. NAFTA compliant and Made in USA models available.
66
www.leviton.com/les 67
INTEGRATED ROOM CONTROL (IRC)
Featuring 1-10V Dimming, Daylight Harvesting and Demand Response Capabilities
Designed to deliver an easy code compliant solution for ASHRAE 90.1 2010 and California Title 24 2013, the Leviton
Integrated Room Control (IRC) combines single room occupancy sensing, daylighting, 1-10V dimming, Partial ON, Partial
OFF and demand response capabilities into a single, easily installed package. IRC features several methods of Ladderless
Commissioning™ for install-and-forget convenience. The performance, features and capabilities of the IRC product provide a
simple and cost-effective stand-alone energy management solution to maximize energy efficiency and meet energy code
mandates for virtually any commercial room control application.
FEATURES
• Stand-alone simplified daylight harvesting with full range
dimming
• Demand response capabilities
• 2 or 3 zone control for LED lighting
• Kitted with factory configured sensor, photocell and 4-button
switch
• 4-button switch available with ON, Bright, Dim and ON/OFF
buttons with optional engraving
• 2 entry stations for individual manual zone control included
with 2 zone, 2 relay kit (RCD20-102)
• CA Title 24 2013 Stairwell Application Control
Room Control | IRC
• Provides plug load control when paired with OPP20 Super Duty
Power Pack
• Cost-effective energy code compliance
• Ladderless Commissioning provides install-and-forget IRC Integrated Room
convenience Control (IRC)
(MZD20-102)
• Convenient occupancy sensor and photocell integration Zone 1 Zone 2
68
INTEGRATED ROOM CONTROL (IRC) LOAD RATINGS
• 20A per relay, 120/277V
• 15A per relay, 347V
• 1-10VDC LED drivers, Fluorescent, non-dimmed and 1-10V dimmed
• 120mA power output for operation of occupancy sensors, photocells, etc.
ORDERING INFORMATION
ROOM-IN-A-BOX KITS - Order a Complete System with One Part Number
CAT. NO. DESCRIPTON
IRC Dimming Room Control Kit, includes Low Voltage devices; 2 Zone Room Controller w/(2) 1-10V outputs
RCD20-102 and (2) 120/277V relays, M/T Occupancy Sensor (OSC20-M0W), 4 Button Switch (RLVSW-4LW),
Photocell (ODC0P-00W), 120/277VAC, 50/60Hz
IRC Dimming Room Control Kit, includes Low Voltage devices; 3-Zone Room Controller w/(3) 1-10V outputs
RCD30-101 and (1) 120/277V relay, M/T Occupancy Sensor (OSC20-M0W), 4 Button Switch (RLVSW-4LW),
Photocell (ODC0P-00W), 120/277VAC, 50/60Hz
IRC Dimming Room Control Kit, includes Low Voltage devices; 2-Zone Room Controller w/(2) 1-10V outputs
RCD20-C02 and (2) 347V relays, M/T Occupancy Sensor (OSC20-M0W), 4 Button Switch (RLVSW-4LW),
Photocell (ODC0P-00W), 347VAC Canadian model, 50/60Hz
IRC Dimming Room Control Kit, includes Low Voltage devices; 3-Zone Room Controller w/(3) 1-10V outputs
RCD30-C01 and (1) 347V relay, M/T Occupancy Sensor (OSC20-M0W), 4 Button Switch (RLVSW-4LW),
ORDERING INFORMATION
CAT. NO. DESCRIPTION
RLVSW-4LW 4-button dimming ON/OFF Controller for use with IRC System
RLVSW-2LW 2-button ON/OFF Controller for use with IRC System
RDGSW-2Ex* 2-button Color Change Kit
RLVSW-1LW 1-button ON/OFF Controller for use with IRC System
RDGSW-4Ex* Color Change Kits
RDGSW-2Fx* 2-Button Custom Engraved Color change Kit
RDGSW-4Fx* Engraved Color Change Kits
*Replace X to indiciate color: White (W), Ivory (I), Light Almond (T), Gray (G), Black (E) and Red (R).
www.leviton.com/les 69
HOSPITALITY KEY CARD SWITCHES
Leviton key card switches are designed to provide energy savings for the hospitality industry by ensuring that no devices are
left on when the room is not in use. These switches control electrical circuits by simply inserting or removing the guest’s
access card into the device. Both line voltage and low voltage switches are available for application flexibility.
Hospitality Key Card switch with color change kit, 120-277V HKSWP-0DX*
Hospitality Key Card switch with color change kit, 120-277V, no neutral HKSWP-GDX*
Hospitality Key Card switch with color change kit, 24V HKSWP-0LX*
Faceplate, Gray, 25 pack HKSWP-00G*
Faceplate, Ebony, 25 pack HKSWP-00E*
*All HKSWP models ship with the Color Change kit — includes a White, Ivory and Light Almond faceplate
HKSWP
70
www.leviton.com/les 71
GREENMAX® RELAY CONTROL SYSTEM
Smart Lighting Control
Designed for the contractor, specifier and end user, the GreenMAX Relay Control System offers the best performance,
reliability, flexibility and energy savings of any relay control available. GreenMAX easily integrates various lighting control
strategies like switching, dimming, behavior controls, scheduling, occupancy sensing and daylight harvesting To learn more
visit www.leviton.com/GreenMAX.
FEATURES
• Scalable solution offers future expansion opportunities
• California Title 24 2013 code compliance, including demand response
• ASHRAE Standard 90.1 2010 compliance
• Eligible for LEED certification points
Photocell Occupancy
• Daylight harvesting capabilities Sensor
- Dimming - Switching
- Open Loop - Closed Loop
0-10V BALLAST
• Highest Short Circuit Current Rating (SCCR) of 25,000A
at 277VAC for maximum equipment performance Loads
LumaCan
fluorescent ballast and 20A incandescent in 1-pole and GreenMAX 16 - Relay Cabinet
Centralized Control | GreenMAX®
72
APPLICATIONS
• Heavy retrofit applications
• New construction projects
• Government facilities
• Office buildings
• Hospitals/medical offices
• Universities
• Restaurants
• Large campuses
• Any other location where centralized lighting
control, programming and monitoring are required
Command Module
LumaCAN Ethernet Twin 35W Main Low Voltage Communication Link
Port Port Power Processor 16-Input Card (Between Command
USB Port Supply Module and Relay
Wiring
Diagram
Lock
Relay
Insert
Panel
Door with
Split Hinges
Right
Panel
Cover
Power and
Lighting
Left Panel 2-Pole Wire Way
Cover Relay
Grounding Manual
Points Actuator
Lower Ventilation
Cover
www.leviton.com/les 73
GREENMAX RELAY CABINETS
• GreenMAX cabinet has a 25,000A at 277 VAC Short Circuit Current
Rating (SCCR) for increased reliability and durability
• Empty cabinet enclosures ship separately from electronic
components – Command Module and Relay Insert Panel – making
the cabinets lighter and easier to handle and requiring less effort
to install
• Empty cabinet also provides unobstructed access to conduit entry
points and reduces the risk of damaging electronics
• Relay cabinets can hold 8, 16, 32 and 48 relays, each with unlimited
and flexible configuration capabilities; the 1-10 VDC dimming and
switching relay models can be installed in any available relay slot
• Increased arc flash protection—the cabinet door opens to expose
only the low voltage area of the cabinet
• Remote Low Voltage Panels allow the connection points of the
low voltage wiring enclosure to be installed closer to the devices it
serves, reducing wiring and labor costs and making commissioning
or troubleshooting easier
• Takes only eight screws to assemble the internal Relay Insert
Centralized Control | GreenMAX®
74
HANDHELD DISPLAY UNIT (HDU)
• Allows programming, system configuration, and scheduling to be
done in the space being controlled rather than the electrical room
to make commissioning and set-up functions easier
• Configure and control the entire GreenMAX system (or multiple
systems) from any convenient network access point—relay
cabinets, switches, or remote low voltage cabinets with just
one HDU
• Provides interface with all devices and relays in the system
• Can be stored in the cabinet or designated docking station
• Communicate via LumaCAN
• 7 hour run time on a single full charge
• Astronomical clock – sunrise/sunset
• HDU does not need to be connected to system during operation.
The full computing power of a PC remains in the palm of your hand
• Comes complete with a set of rechargeable batteries
www.leviton.com/les 75
PROGRAMMING GREENMAX WITH LIGHTING BEHAVIORS
LIGHTING CUSTOMIZATION
GreenMAX controls allow different Behavior settings to be programmed throughout the day. Using the HDU, any room
can be set with just a few button selections:
• Select the Behavior desired and time Behavior will take place
• Choose any additional Behavior transitions and the time transition will take place
• Optional override to sunrise/sunset astronomical clock prevents lights from activating prematurely in summer or too late
in winter
• Set Behaviors to scale on a daily, weekly, monthly or holiday schedule
• Up to 24 Behaviors per 24 hour period can be programmed and can be as close together as one minute
BEHAVIORS
Centralized Control | GreenMAX®
OCCUPANCY
NUMBER DESCRIPTION SENSOR PHOTOCELL SWITCH TIME
Lights turned ON with the switch.
B1 Can be turned OFF with switch. OFF - ON/OFF -
Occupancy Sensor will turn OFF upon vacancy.
Lights turned ON with the Occupancy Sensor.
B2 Can be turned OFF/ON with switch. ON/OFF - ON/OFF -
Occupancy Sensor will turn OFF upon vacancy.
B3 Occupancy sensor turns lights ON/OFF. ON/OFF - - -
B4 Switch ON/OFF. - - ON/OFF -
Time triggers a Blink Warn sequence, an OFF blink followed by a
variable ON delay.
B5 - - ON/OFF Blink/OFF
Switch interrupts sequence and starts override timer.
Will automatically turn OFF relay if override timer reaches zero.
B6 Turn ON at specific time. - - - ON
B7 Turn OFF at specific time. - - - OFF
Occupancy sensor turns ON lights with occupancy.
Measured light levels above Photocell trigger point turns OFF or keep lights
B8 ON/OFF OFF - -
OFF, below set-point allows control by Occupancy Sensor.
Occupancy Sensor turns OFF lights with vacancy.
Switch turns ON/OFF lights.
Measured light levels above Photocell trigger point turns OFF or keep lights
B9 OFF OFF ON/OFF -
OFF, below set-point allows control by Occupancy Sensor.
Occupancy Sensor turns OFF lights with vacancy.
Occupancy Sensor turns ON lights with occupancy.
Measured light levels above Photocell trigger point turns OFF or keep lights
B10 OFF, below set-point allows Occupancy Sensor control. ON/OFF OFF ON/OFF -
Switch can turn ON/OFF lights by over-riding Occupancy Sensor control.
Occupancy Sensor will turn OFF lights upon vacancy.
Switch ON/OFF.
B11 Measured light levels above Photocell trigger point turns OFF or keep lights - OFF ON/OFF -
OFF, below set-point allows Switch control.
Turn ON at specific time.
B12 Measured light levels above Photocell trigger point turns OFF or keep lights - OFF - ON
OFF, below set-point reliquishes control to the constant ON state.
Occupancy sensor turns lights partially ON. Switch turns lights ON full bright
B13 ON/OFF - ON/OFF -
or turns them OFF
Lights ON at minimum level. Occupancy sensor raises/lowers light level
B14 ON/OFF - - -
between Partial-ON and full ON
76
BEHAVIORS, CONT.
AUTO-PROMPT CUSTOMIZATIONS
NAME DESCRIPTION VALUE RANGE
2.5, 5, 10, 15, 30, 60, 90, 120
Switch OFF Delay When relay is turned ON with the switch, length of time before relay will automatically turn OFF.
minutes, and Constant ON
Occupancy Sensor 0, 0.5, 2.5, 5, 10, 20, 30
When vacancy is determined, length of time before relay will automatically turn OFF.
OFF Delay minutes
Photocell Delay Delay before action is taken after a Photocell trigger point has been crossed. 0, 0.5, 2.5, 5, 10, 20 minutes
Blink Warn -
The length of the OFF Blink used to notify occupants than an OFF sequence has been initiated. 0.5-25.4 seconds
Blink Duration
This period follows the Blink and lasts the length of the specified time. If button is pressed
Blink Warn - Delay during this period, the Delay timer stops and the Override Time starts. If no buttons are pressed, 1-254 minutes
the lights will turn OFF.
The relay will remain ON for the duration of this timer. A new Blink Warn sequence will be
Blink Warn -
initialized at the end of this period. If the relay had been OFF previously and a button is pressed to 1-254 minutes
Override Time
turn the relay ON, this timer will be started again.
Main Command Module with 8-Port Low Voltage RPM08-308 GreenMAX Digital Switch, 1-Button, LumaCAN3 RDGSW-1Cx*
Input Card, 100-277V AC, 50/60Hz, LumaCAN3 GreenMAX Digital Switch, 2-Button, LumaCAN3 RDGSW-2Cx*
Main Command Module with 16-Port Low Voltage RPM16-316 GreenMAX Digital Switch, 8-Button, LumaCAN3 RDGSW-8Cx*
Input Card, 100-277V AC, 50/60Hz, LumaCAN3
GreenMAX Digital Switch, 4-Button, LumaCAN3 RDGSW-4Cx*
PANEL INTERIORS (ALL PANELS ARE 16-POSITION, RATED 30A, 120-
GreenMAX Keyswitch RDGSW-1KS
230-277/347V AC, 50/60HZ)
GreenMAX 1-Button Color Change Kit RDGSW-1Ey**
Relay Insert Panel, Empty with 8 Empty Spaces R0800-000
GreenMAX, 8-Button Color Change Kit RDGSW-8Ey**
Relay Insert Panel, Empty with 16 Empty Spaces R1600-000
GreenMAX 2-Button Color Change Kit RDGSW-2Ey**
Relay Insert Panel with 16 1-Pole Basic Relays R1616-1CB
GreenMAX 4-Button Color Change Kit RDGSW-4Ey**
Relay Insert Panel with 16 1-Pole Dimming and R1616-1DS
Switching Relays GreenMAX 1-Button Engraved Color Change Kit RDGSW-1Fy**
Relay Insert Panel with 16 1-Pole Basic Relays R1616-1TB GreenMAX 2-Button Engraved Color Change Kit RDGSW-2Fy**
Relay Insert Panel with 16 2-Pole RTC Relays R1616-2CB GreenMAX 4-Button Engraved Color Change Kit RDGSW-4Fy**
Relay Insert Panel with 16 2-Pole Basic Relays R1616-2TB GreenMAX, 8-Button Engraved Color Change Kit RDGSW-8Fy**
HANDHELD DISPLAY UNIT (HDU) CABINET ACCESSORIES
Handheld Display Unit, Cabinet Mounting, LumaCAN3 RHDU1-300 GreenMAX Voltage Barriers for 8-Relay Cabinets RGBAR-008
Handheld Display Unit, Mounting Bracket Requires 2 RHDU1-001 GreenMAX Voltage Barriers for 16-, 32- and 48-Relay RGBAR-016
Gang Back Box Cabinets
REMOTE INPUTS WITH POWER SUPPLY (ALL CABINET POWER *Replace x with the following color codes — (W) White, (I) Ivory, (T) Light Almond.
SUPPLIES RATED 120-277V AC, 50/60HZ) **Replace y with the following color codes — (W) White, (I) Ivory (T) Light Almond,
(G) Gray, (E) Black, (R) Red
Remote Low Voltage Input Cabinet, 8 Inputs, NEMA 1 RLV08-308
Enclosure, LumaCAN3
Remote Low Voltage Input Cabinet, 16 Inputs, NEMA RLV16-316
1 Enclosure, LumaCAN3
www.leviton.com/les 77
TRACK LIGHT LIMITING PANEL (TLLP)
FEATURES
• Enables designer lighting to easily
meet energy code watt density requirements
• California Title 24 2013 Track Light
Supplementary Overcurrent Protection
Panel
• Assists track lighting schemes in
meeting energy code regulations
including CA Title 24 2013, ASHRAE Standard
90.1 2010 and City of Seattle guidelines
• Excellent for use in retail and
restaurant settings
• Simplifies load calculations by using
volt-ampere rating of the breaker
as opposed to calculated values on
Centralized Control | Track Light Limiting Panel
the track
• Reduces installation costs
• Available in 16 or 32 circuit panels
• NEMA 1 surface or flush mount enclosure
• Factory configured to your specifications
— arrives ready to install
ORDERING KEY
78
EZ-MAX® PLUS RELAY CONTROL PANELS
EZ-MAX Plus relay lighting control panels pack power and performance in compact and cost-effective 8-circuit and 24-circuit
models. EZ-MAX Plus is the ideal solution for smaller, stand-alone applications that do not require the field configuration or
advanced networking features like the GreenMAX Relay Control systems.
Programming is easy with the EZ-MAX Plus with a large LCD screen on the panel or an off-line editor. EZ-MAX Plus includes
standard programming configurations for occupancy sensors and photocells as well as a built-in astronomical time clock
(ATC) with 101 major city and states programmed into the system.
www.leviton.com/les 79
FEATURES
• Large, bright LCD screen with oversize buttons for easy programming
• Easy standard programming configuration:
- Occupancy sensors: manual-ON or auto-ON applications
- Photocells: interior or exterior application modes
- Photocell light level trip points: ON or OFF
• Built-in astronomical time clock and scheduler
- 101 major cities and states programmed for easy astronomical setup
- Sunrise/sunset time clock events
• Auto detection/auto assign of installed network switches
• Enable/disable of low voltage and digital input devices minimizes power consumption
• Clearly labeled access points allow installer to locate optimum knock-out locations
• ON/OFF timed control of LED - use with low voltage sensors, photocells and switches
• UL and cUL Listed Industrial Control Equipment and Emergency Lighting Equipment for 120V, 277V and 347V Panels
• ASHRAE Standard 90.1 2010 compliant
• CA Title 24 compliant and listed
Centralized Control | EZ-MAX® Plus
APPLICATIONS
• Low voltage control
• Site lighting
• Daylight harvesting
• Occupancy sensor integration
• Parking garage/parking lot lighting
• Smart replacement of time clock/contactor installations
• Any application requiring reliable and cost-effective automatic on/off lighting control
80
EZ-MAX PLUS RELAY CARDS
EZ-MAX Plus Panels use individual relay cards for each circuit allowing for the most flexibility in matching the relay type to
your specific load requirements. The benefit of a single relay card for a single circuit allows an infinite arrangement of relay
types to position in your system and supports individual replacement should the need ever occur.
• For maximum equipment protection, standard 30A relay card has a Short Circuit Current Rating (SCCR) of 20,000A
• Relay cards individually replaceable
• Mechanical attachment to panel of each relay card is with a single screw
• Listed for use with ballasted loads
• From the panel, each relay card can be controlled as follows:
- Override ON
- Override OFF
- Locked Override ON
- Locked Override OFF
- Timed ON
- Timed Override OFF
• Backed by a limited 10-year warranty on relays
ACCESSORIES*
DESCRIPTION CAT. NO.
Low Voltage Switch Adapter for GE 5-wire switches
RAC00-2SB
(installed at the switch itself, cabinet has terminations for ON/OFF/LED/+1/com)
xx Button, Low Voltage Switch, White 00LVS-xxW*
xx Button, Digital Switch, White ZMDSW-xxW*
Outdoor Photocell, 1-10V, 0-250 FC PCOUT-000
Indoor Photocell, 1-10V, 0-100 FC PCIND-000
Atrium Photocell, 1-10V, 0-1000 FC PCATR-000
Skylight Photocell, 1-10V, 0-2000 FC PCSKY-000
* For a complete range of occupancy sensors for use with EZ-MAX Plus, refer to www.leviton.com/occupancysensors
www.leviton.com/les 81
EZ-MAX PLUS VS. GREENMAX:
THE BEST SYSTEM FOR SPECIFIC APPLICATIONS
Leviton offers multiple options in relay control for contractors, developers, architects and facility managers. Please see below
for details on which system offers the most value for different applications.
82
www.leviton.com/les 83
SECTOR® INTELLIGENT DIGITAL LIGHTING CONTROL SYSTEM
The Sector Intelligent Digital Lighting Control System combines occupancy sensing, daylighting and flexible dimming lighting
control in one conveniently integrated system that saves time, money and energy. This topology-free, polarity-free system
allows the entire network to be installed using the same wiring for all components and accessories, making it one of the
easiest lighting control systems to install. All components are on a single bus, with accessories connected to the network,
not the ballast. The Sector family of products provides a scalable solution that offers maximum flexibility and coverage in any
application – from a single room to a campus of buildings in retrofit or new construction projects. To learn more, visit
www.leviton.com/Sector
FEATURES
SECTOR INTELLIGENT DIGITAL LIGHTING CONTROL SYSTEM
• Topology free
• California Title 24 2013 and ASHRAE Standard 90.1 2010 compliant
• Polarity free — Class 1 or Class 2 Wiring/standard building supported wiring in same conduit as power wiring
• No special terminations or installation requirements
• Scene control switches
• Behavior support
• Occupancy sensor feedback to BMS systems
• Personal workspace lighting control from user’s personal computer for user comfort
Distributed Control | Sector®
ADVANTAGES
• Easy to Use with 1-10V LED drivers
• Simple to Design — scalable system for small and large applications; devices that connect directly to the network can be
installed anywhere in the system
• Easy to Install— topology free, polarity independent, and operates on standard Class 1 or Class 2 wiring throughout the en-
tire systems to reduce installation costs by as much as 35% or more; standard wire is found in every contractor’s inventory
• Flexible to Commission— configuration and commissioning is completed from the PC application without physically having
to go to each device
• Ultimate time-saving design flexibility – easily integrate various lighting control strategies—switching, distributed dimming,
scheduling, occupancy sensing, and daylight harvesting – in one system offering future expansion opportunities
• Easy energy code compliance and eligibility for LEED points
• Control and customization from occupant’s desktop as well as remote control and administrator software interface
• SectorFlex system controls Sector and non-Sector 1-10V ballasts or LED dimmers by any manufacturer, allowing for
flexibility in implementation
• Minimal installation time — color coded easy-insert connectors simplify wiring and minimize installation time
• Miswire protection prevents lamp failure if wired incorrectly
• Smooth fade through dimming range of 1% to 100% for flicker-free dimming
• Lamps turn on at any dimmed level without flashing to full brightness, extending lamp life and providing a better user
experience
• Non-volatile memory restores all ballast settings after power failure
84
SECTOR RELAY
• Provides switching control for non-dimming devices and 1-10V control
for sinking and sourcing controllable loads like LED drivers, ballasts and
incandescent dimmers
• Used for both switching only loads and dimming loads controllable with
a 1-10 control signal
• Provides additional system design options, allowing control of ballast
incandescent, LED, cold cathode or other sources that may attempt a
1-10VDC control input
SECTOR PHOTOCELL
• Daylight harvesting capabilities offer consistent lighting at desired level
for greater visual comfort
www.leviton.com/les 85
SECTOR DIGITAL SWITCH
• User controls desired light level at the push of a button
• 5 button (MAX, BRIGHT, DIM, OFF Daylight Harvesting ON) and 2 button (ON, OFF) available
• 2 button (ON/OFF)
SECTORNET SOFTWARE
• Personal Dimming Option (PDO) — Individual control for the lights above a user’s
workspace right from their desktop PC
• Central control — Facility personnel and lighting administrators can re-configure control
as needed with Illustrator layout tool
Distributed Control | Sector®
• A computer is only needed to initially configure the system. Afterward, Sector can be
ran as an independent system
• Commissioning quickly associates fixtures to Sector devices for easy configuration that
can be remotely controlled
• Data acquisition for energy usage monitoring
• Ladderless commissioning — remotely configure and control system components
• 3 levels of load shed allow user to automatically adjust power consumption across the
entire system by simply clicking a button
86
2 Button 2 Button
Switch Switch
Remote
Occupancy
Sensor 2 Button
Switch
Photocell
Power
1-10V
Sector
LED Fixture Relay 1-10V
LED Fixture
~Voltage
Line ~
Line
SectorNet Wiring
Sector Voltage ~ Line
Min 18AWG
Relay Voltage
Sector
Line Relay Sector
Relay
~ Voltage
Max Longest Run - 1000’
CLASS 1 OR 2 WIRING
LED Fixture
SectorNet Network
Sector 0-10V
Relay Control
& Power
Occupancy
~
Line
Sensor
Voltage
2 Button
Switch
2 Button
Switch Sector
2 Button Relay
Switch ~
Line
SectorNet Network
Voltage
Occupancy
Sensor
Area 7
Occupancy
SectorNet Network
Sensor
LED Fixture
1-10V Sector
Relay 1-10V LED
Sector LED Fixture
Fixture
Relay Sector
Relay
~
Line
Line Voltage ~Line
~Voltage
To other Bus Controllers
Line Voltage
~ Voltage
Sector
*Power Relay
Terminate each end Supply
of the LumaCAN Bus *Power
network by pushing Controller Supply
blue button Bus
Area 1 Area 3 Area 5 Controller
~
www.leviton.com/les 87
ORDERING INFORMATION
DESCRIPTION CAT. NO.
Sector Bus Controller/Power Supply,
SBP00-00M
120-277V, 50/60Hz
Sector Relay, 120-347V 20A Output,
SBCS0-L00
120-277V, 50/60Hz Input
Sector 4-Module Enclosure (to hold a
SEN04-000
maximum of 4 Bus Controllers)
Sector PIR Occupancy Sensor, White,
OSC04-ISW
450SF
Sector Multi-Technology Occupancy
OSC20-MSW
Sensor, White, 2000 SF
Sector Photocell ODC0P-0SW
5-Button Digital Switch, White SDS00-15W
2-Button Digital Switch, White SDS00-12W
Artwork Kit, Scene 1, Raise, Lower,
SDSP1-R5W
Max, OFF
Artwork Kit, Scene 1, Max, OFF SDSP1-M2W
Distributed Control | Sector®
88
www.leviton.com/les 89
SMARTER METERING. SMARTER CONTROL. REAL SAVINGS.
THE BENEFITS OF SUBMETERING
VerifEye delivers a comprehensive line of leading-edge submeters, communication products, and software solutions as the
key building blocks to help you better manage costs and conserve energy.
Develop your strategic energy management plan using revenue grade real-time energy usage information to measure,
monitor, and manage operations to improve your bottom line. From tenant billing to energy measurement & verification
(M&V) software solutions, VerifEye offers cost effective scalability and integration to provide you with the solution you
need today and in the future.
For additional energy savings, combine VerifEye with Leviton lighting controls for a complete energy management
solution from a single source.
• AMR/BMS/EMS integration
• Renewable and bi-directional applications
• Compliance with green building initiatives
90
EXCELLENCE COMES STANDARD
• Open architecture design provides easy integration with third party building management system (BMS) platforms
• UL 916 Listed or recognized for Energy Monitoring Equipment and UL 61010 Electrical Equipment for Measurement
and Control
• Installer friendly, reverse phase LED indicator arrow and power and load indicators provide installation diagnostics by visually
confirming that the product is properly installed and functioning
• Leviton Series 1000, 2000 and 3500 meters are available as an indoor steel or outdoor NEMA 4X enclosure at the same low
price; Series 4000 and 4100 meters available as DIN rail and NEMA 4X
• VerifEye offerings include a wide range of meters to meet the needs of any application. Automated data collection solutions
and energy reporting and analysis software to easily and intelligently manage energy consumption
• Solutions are confidently backed by a best in the industry 5 year warranty
Scalable System
Options for future upgrades and additions are available with Leviton’s flexible solution—no need to purchase an entire
Open Protocol
Ease of communication with the use of Leviton Data Acquisition Communication equipment
On-Site Software
ModHopper
Add to any VerifEye system
for wireless metering
EMH
Energy Monitoring Hub*
BillSuite
18/2 Wire
Series 1000 Series 2000 Series 3500 Series 4000/ Series 8000 EMH+ All-in-One
Series 4100 Meter & Hub*
3rd Party
Protocols: Protocols: Protocols:
- ModBus RTU - ModBus RTU - ModBus RTU
- ModBus TCP/IP - ModBus TCP/IP - ModBus TCP/IP
- BACNet IP - BACNet IP - Optional BACNet IP
Water Gas Steam
www.leviton.com/les 91
VERIFEYE METERS
MMU Mini Meter Flush Mount 0.5% Mini Meter Mini Meter Outdoor Series 8000 EMH+ All-In-One
Meter & Hub*
Residential Residential/Commercial
Series 8000
Specifications Multiple Point
Mini Meter™ 0.5% Mini Meter High Density EMH+ All-In-One
Kits Kits Meter Meter & Hub*
kWh Meter kWh Meter
1PH 2W 3PH 3W Delta
1PH 3W WYE 3PH 3W WYE
Phase/Wiring 1PH 3W 1PH 3W
3PH 3W Delta 1PH 2W
?
120/240
Voltage 208-480
120/208/240 120/208/240 240/416
Configurations 120, 240, 277VAC
277/480
480*
Current
Split Core Split Core Split Core
Transformers Solid Core
Solid Core Solid Core Solid Core
Options
OEM Module
Indoor Plastic Indoor Flush Mount
Enclosure Indoor JIC Steel
Flush Mount NEMA 1 Indoor Surface Indoor Plastic Surface Mount
Options NEMA
Outdoor NEMA 4X Mount
MMU NEMA 4X
LCD or Mechanical
Display Type Counter LCD Local LCD, Scroll LCD
C12.20 +/- 0.5% C12.20 0.5% with C12.1 1% +/- 0.5% from 2%
Accuracy C12.20 +/- 0.5%
with paired CTs paired CTs to 100% of full scale
Medium, 2-4 Meters
Multiple Meter 3PH: 8 points
Large, 5-8 Meters _ _
Unit (MMU) 2PH: 12 points
Configurations Extra-Large, 1PH: 24 points
9-19 Meters
Last Reading - Last reading - 1 to 60 min
Last Reading - Last Reading - Cumulative Data in User Selectable
Data Storage
Cumulative Cumulative 15 min Intervals (default 15 min)
92
Series 1000 Series 1000 Series 2000 Series 2000 Series 3500 Series 3500 Series 4000/4100 Series 4000/4100
Indoor Outdoor Indoor Outdoor Indoor Outdoor Indoor Outdoor
Commercial
Commercial
and Industrial
Series 4100
Series 4000 Industrial
Series 1000 Series 2000 Industrial ModBus ModBus RTU and
Single Phase Three Phase Series 3500 Meter Kits BACNet MS/TP
Meter Kits Meter Kits Multi-Function Ethernet Meter Kits kWh Meter Meter Kits
kWh Meter with Optional Demand Advanced kWh Meter with Communication
Phase/Wiring 1PH 2W 1PH 3W 3PH 4W WYE 3PH 3W/4W 3PH 3W 3PH 4W 3PH 3W/4W
120/208
Voltage 120 120/208
kWh
kWh
kWh kW (peak demand reset) Meter Totals: kVARh, kW, kVAR, kVA,
Measuring Optional kW
Optional kW Meter total: kVAR, kVA, Power Factor & kW Voltage L-L, L-N, Current, Power Factor,
Parameters (peak demand
(peak demand reset) By Phase: Volts, Watts, Amps, Power Factor Frequency
reset)
Interval Data
Indoor
Indoor JIC Steel NEMA 1 Indoor Indoor Indoor
Enclosure Steel NEMA 1 Outdoor JIC Steel NEMA 1 DIN Rail Mount DIN Rail Mount
Options Outdoor NEMA 4X Outdoor Outdoor Outdoor
NEMA 4X MMU JIC Steel NEMA 4X NEMA 4X NEMA 4X Enclosure
NEMA 1
Display Type Local LCD Local LCD, Scroll LCD, Scroll LCD, Scroll
Accuracy C12.20 +/- 0.5% C12.20 +/- 0.5% C12.10 and C12.20 +/- 0.5% C12.20 0.5% C12.20 0.5%
Medium:
Multiple Meter 2-4 meters
Unit(MMU) - Large: 5-8 meters - - -
Configurations Extra-Large:
9-16 meters
Last Reading - Cumulative Peak Demand Last Reading - Cumulative Peak Demand Last Reading - Present and Peak Demand for kW
Data Storage
with Key Reset (optional) with Key Reset Data in 15 min Intervals and kVAR
www.leviton.com/les 93
MINI METER™
EQUITABLE TENANT BILLING
Some multi-tenant residential properties include energy costs in rental fees and generally charge tenants for energy based
on the square footage occupied. To be truly equitable, tenants should pay only for what they actually use. With Leviton Mini
Meters, building managers can easily track and allocate energy usage costs fairly to multiple tenants, as well as recoup
energy expenses from common-use areas (parking lots, hall lighting, etc.). Tenants benefit by paying only for the energy they
use; and when they focus on conserving energy, they can see direct financial benefits from their efforts.
FEATURES
• kWh Meter
• 120V 1PH 2W and 120/208/240V 1PH 3W
• 100-200 Amps
• Pulse Output - standard feature
• Available in indoor flush mount and surface mount enclosures and NEMA 4X outdoor individual meter enclosures and
Multiple Meter Units (MMUs) from 2 to 19 meters
• Select surface mount and flush mount models include built in tamper-proof switch or built-in wireless AMR and temperature
sensing capabilities
• 0.5% revenue grade accuracy class
• Use with solid core CTs to achieve 0.5% accuracy. Also available with split core CTs.
VerifEye™ Submetering Solutions
• Up to three sets of CTs per phase can be paralleled per meter with no multipliers
• Components of Mini Meter Kits are UL/cUL Listed Energy Usage Monitor per CCN FTRZ
94
MINI METER KITS
Note: Kits include meter, specified enclosure and required current transformers
WIRELESS REPEATER
DESCRIPTION CAT. NO.
Repeater, 5V, includes 5VDC 1A plug-in power supply and internal backup battery T101R-05V
www.leviton.com/les 95
MULTIPLE METER UNITS (MMUs)
For both retrofit and new construction, Leviton Multiple Meter Units (MMUs) are fast and easy to install. They come pre-wired
per project configuration sheets with clearly labeled connections, minimizing the electrical installation time, another great
money saving feature.
All Leviton MMUs are UL Listed assemblies, giving your customers extra assurance at no extra cost. Choose from an indoor
steel model in 4/8/16 unit single- or three-phase configurations utilizing Series 2000 meters or a weatherproof outdoor
enclosure in 4/8/19 unit single-phase configurations utilizing Mini Meters. If your application requires a
different configuration, Leviton is ready to help.
VerifEye™ Submetering Solutions
Series 2000 Multiple Meter Unit (MMU) Mini Meter Multiple Meter Unit (MMU)
All MMUs are customizable and field upgradable for individual projects.
Each meter order requires submittal of a Configuration Form.
Go to leviton.com/verifeye for more information.
96
ORDERING INFORMATION
120/240V 6 Dual Element Meters 6L206-CFG 120/208V 6 Three Element Meters 2L206-CFG
1PH 3W 7 Dual Element Meters 6L207-CFG 3PH 4W 7 Three Element Meters 2L207-CFG
120/208V 6 Dual Element Meters 6L306-CFG 277/480V 6 Three Element Meters 2L406-CFG
3PH 4W 7 Dual Element Meters 6L307-CFG 3PH 4W 7 Three Element Meters 2L407-CFG
8 Dual Element Meters 6L308-CFG 8 Three Element Meters 2L408-CFG
EXTRA-LARGE MINI METER MMU, 9-19 METERS, EXTRA-LARGE SERIES 2000 MMU, 9-16 METERS,
NEMA 4X ENCLOSURE NEMA 4X ENCLOSURE
9 Dual Element Meters 6X209-CFG 9 Three Element Meters 2X209-CFG
10 Dual Element Meters 6X210-CFG 10 Three Element Meters 2X210-CFG
11 Dual Element Meters 6X211-CFG 11 Three Element Meters 2X211-CFG
12 Dual Element Meters 6X212-CFG 120/208V 12 Three Element Meters 2X212-CFG
13 Dual Element Meters 6X213-CFG 3PH 4W 13 Three Element Meters 2X213-CFG
120/240V 14 Three Element Meters 2X214-CFG
14 Dual Element Meters 6X214-CFG
1PH 3W
15 Dual Element Meters 6X215-CFG 15 Three Element Meters 2X215-CFG
16 Dual Element Meters 6X216-CFG 16 Three Element Meters 2X216-CFG
17 Dual Element Meters 6X217-CFG 9 Three Element Meters 2X409-CFG
18 Dual Element Meters 6X218-CFG 10 Three Element Meters 2X410-CFG
19 Dual Element Meters 6X219-CFG 11 Three Element Meters 2X411-CFG
9 Dual Element Meters 6X309-CFG 277/480V 12 Three Element Meters 2X412-CFG
10 Dual Element Meters 6X310-CFG 3PH 4W 13 Three Element Meters 2X413-CFG
11 Dual Element Meters 6X311-CFG 14 Three Element Meters 2X414-CFG
12 Dual Element Meters 6X312-CFG 15 Three Element Meters 2X415-CFG
13 Dual Element Meters 6X313-CFG 16 Three Element Meters 2X416-CFG
120/208V
14 Dual Element Meters 6X314-CFG
3PH 4W
15 Dual Element Meters 6X315-CFG
16 Dual Element Meters 6X316-CFG
17 Dual Element Meters 6X317-CFG
18 Dual Element Meters 6X318-CFG
19 Dual Element Meters 6X319-CFG
www.leviton.com/les 97
SERIES 8000 MULTI-POINT HIGH DENSITY METERS
The Series 8000 Multi-Point High Density Meters are designed to meter high density applications such as multi-tenant
office and residential buildings, medium-sized retail stores and institutional facilities and branch circuit monitoring. For easy
data accessibility, the Series 8000 design is based on an open protocol network to transmit data over ModBus and BACnet.
Combining revenue-grade electrical submetering with building automation communications technology, the Series 8000
Meter complies with all regulatory electric safety and communications requirements and meets stringent ANSI 0.5 %
Accuracy Class standards.
98
SERIES 1000 SINGLE PHASE METERS
• kWh meter with optional Peak Demand functionality (includes Reset Key)
• 100 - 800 Amps
• Isolated Pulse output—standard feature
• Large LCD Display
• ANSI 0.5% revenue grade accuracy class
• Utilizes split and solid core current transformers (CTs) that are certified to all revenue grade accuracy standards
• Up to three sets of CTs per phase can be paralleled per meter with no multipliers
ORDERING INFORMATION
SERIES 1000 SINGLE PHASE METER KITS
Note: Kits include meter, specified enclosure and required current transformers
www.leviton.com/les 99
SERIES 2000 THREE PHASE METERS
• kWh meter with optional Peak Demand functionality (includes Reset Key)
• 120/208V or 277/480V 3PH 4W WYE only
• 100 - 1200 Amps
• Pulse output—standard feature
• Large LCD Display
• Revenue grade accuracy: 0.5% accuracy class
• Utilizes split and solid core current transformers (CTs) that are certified to all revenue grade accuracy standards
• Up to three sets of CTs per phase can be paralleled per meter with no multipliers
VerifEye™ Submetering Solutions
ORDERING INFORMATION
SERIES 2000 THREE PHASE METER KITS
Note: Kits include meter, specified enclosure and required current transformers
100
SERIES 3500 MULTI-FUNCTION ETHERNET METERS
• Communications protocol:
- ModBus TCP/IP or BACnet IP
- Isolated pulse output
- Ethernet
• Universal voltage for 120-480V
• Measured Parameters
- Total Meter: - Per Phase:
- kWh/kW - Voltage L-N
- kVAh - Current
- kVA and kVAR - Watts
- Power Factor - VA, VAR
- Line Frequency - Power Factor
- Voltage L-L Series 3500 Meter
• Large LCD display with scroll feature
• ANSI 0.5% accuracy class revenue-grade accuracy
• Installation diagnostics
• Low voltage detection
• Real time clock with battery backup for TOU reading
ORDERING INFORMATION
SERIES 3500 MULTI-FUNCTION ETHERNET METER KITS
INDOOR ENCLOSURE OUTDOOR ENCLOSURE
CTS CTS
VOLTAGE AMPS INCLUDED CAT. NO. VOLTAGE AMPS INCLUDED CAT. NO.
100 3KUMT-01M 100 3OUMT-01M
200 3KUMT-02M 200 3OUMT-02M
400 3KUMT-04M 400 3OUMT-04M
800 3 Split CTs 3KUMT-08M 800 3 Split CTs 3OUMT-08M
208-480VAC
1600 3KUMT-16M 208-480VAC 1600 3OUMT-16M
3P 3W/4W
3P 3W/4W
(with ModBus 3000 3KUMT-30M 3000 3OUMT-30M
(with BACnet)
TCP/IP
5000 3KUMT-50M 5000 3OUMT-50M
100 3KUMT-1SM 100 3OUMT-1SM
200 3 Solid CTs 3KUMT-2SM 200 3 Solid CTs 3OUMT-2SM
400 3KUMT-4SM 400 3OUMT-4SM
www.leviton.com/les 101
EMH+ ALL-IN-ONE METER AND HUB*
The VerifEye™ EMH+ combines an onboard revenue-grade power meter and Data Acquisition Hub in a flexible, all-in-one pack-
age. This simple and effective energy solution can be used to meet energy codes and mandates and is ideal for new con-
struction and commercial buildings.
ORDERING INFORMATION
EMH+ ENERGY MONITORING HUB*
AMPS CTS INCLUDED CAT. NO.
100A A8814-1S3
200A A8814-2S3 *VerifEye Building Manager Online (BMO) 2.0
300A A8814-3S3 software is included at no cost with the purchase
400A A8814-4S3 of VerifEye EMH+ All-In-One Meter and Hub.
102
SERIES 4000 INDUSTRIAL MODBUS METER KITS
• Kits include meter, specified enclosure and split core and Rogowski Coil
current transformers
• Industrial Temperature Range -22-58°F (-30-70°C)
• 50/60 Hz
• 90-600V versatility including 347V (L-N) and 600V (L-L) with fewer
models to stock
• ANSI 12.20 0.2% accuracy, IEC 62053-22 Class 0.2S
• Options for 100, 200, 400m 800 and 800A split core CTs and Rogowski
CTs (20-5000A)
Series 4000 Indoor
• DIN Rail Mount
• Energy monitoring for AMR/BAS/BMS/EMS systems
• Tenant cost allocation
• Energy conservation and cost reduction
• Green building initiatives and government mandates
• Measurement and verification
• Load profiling and benchmarking
www.leviton.com/les 103
SERIES 4100 BIDIRECTIONAL MODBUS RTU AND BACNET
MS/TP METER KITS
The VerifEye Series 4100 Bidirectional ModBus RTU and BACNet MS/TP Meter
Kits feature bidirectional monitoring specifically designed for renewable energy
applications. The Series 4100 Meter Kits measure power imported from the
utility grid and power exported from renewable energy source like solar panels.
The Series 4100 Meter Kits are available in a standalone DIN rail mount or NEMA
4X enclosures and come with either split core or flexible rope-style Rogowski
Current Transformers (CTs).
• Bidirectional monitoring
• Industrial temperature range: -22-158°F (-30-70°C) Series 4100 Indoor
• 50/60 Hz
• 90-600V versatility including 347V with fewer models to stock
• Options for 100, 200, 400, and 800A Split Core CTs and Rogowski CTs (20-5000A)
• DIN rail mount for easy installation
• One device serves multiple locations
• User-enabled password protection to protect meter from tampering
• Bright, backlit LCD for installation in dark areas and viewing real time data
VerifEye™ Submetering Solutions
ORDERING INFORMATION
SERIES 4100 BIDIRECTIONAL MODBUS RTU AND BACNET MS/TP METER KITS
INDOOR DIN RAIL MOUNT MODBUS METER KITS OUTDOOR NEMA ENCLOSURE - MODBUS METER KITS
VOLTAGE AMPS CTS INCLUDED CAT. NO. VOLTAGE AMPS CTS INCLUDED CAT. NO.
100 4DUMR-01B 100 41OUM-01B
200 4DUMR-02B 200 41OUM-02B
Split Core CTs Split Core CTs
Universal 400 4DUMR-04B Universal 400 41OUM-04B
3PH 3W/4W 3PH 3W/4W
800 4DUMR-08B 800 41OUM-08B
ModBus ModBus
RTU 20-5,000 12” Rogowski Coil CTs 4DUMR-12R RTU 20-5,000 12” Rogowski Coil CTs 41OUM-12R
20-5,000 18” Rogowski Coil CTs 4DUMR-18R 20-5,000 18” Rogowski Coil CTs 41OUM-18R
20-5,000 24” Rogowski Coil CTs 4DUMR-24R 20-5,000 24” Rogowski Coil CTs 41OUM-24R
INDOOR DIN RAIL MOUNT BACNET MS/TP METER KITS OUTDOOR NEMA ENCLOSURE - BACNET MS/TP METER KITS
100 4DUBM-01B 100 41OUB-01B
200 4DUBM-02B 200 41OUB-02B
Split Core CTs Split Core CTs
Universal 400 4DUBM-04B Universal 400 41OUB-04B
3PH 3W/4W 3PH 3W/4W
800 4DUBM-08B 800 41OUB-08B
BACnet BACnet
MS/TP 20-5,000 12” Rogowski Coil CTs 4DUBM-12R MS/TP 20-5,000 12” Rogowski Coil CTs 41OUB-12R
20-5,000 18” Rogowski Coil CTs 4DUBM-18R 20-5,000 18” Rogowski Coil CTs 41OUB-18R
20-5,000 24” Rogowski Coil CTs 4DUBM-24R 20-5,000 24” Rogowski Coil CTs 41OUB-24R
104
CURRENT TRANSFORMERS
The better the equipment, the better the measurement. Leviton meters utilize highly accurate current transformers for
revenue-grade performance certified to ANSI standards. Competing products use current sensors that do not provide the
same level of performance. Leviton Meter Kits include Split Core or Solid Core Current Transformers (CTs) for high-quality,
long-term accuracy and reliability. For added safety, all Leviton current transformers come with built-in voltage suppression
devices that prevent hazardous voltages from developing on CT secondaries should they become disconnected from a meter
with load current present.
Compact and cost-effective solid core CTs slip over power lines to measure the electrical current flowing through the line.
They are compact and cost effective. For solid core CT installation, power must be de-energized and the circuit opened, in
order to slip the CT over the power line.
ORDERING INFORMATION
SOLID CORE—FOR USE WITH SERIES 8000 METERS,
MINI METERS AND MMUS ONLY
AMP DESCRIPTION CAT. NO.
Solid Core, 0.67”, Black CDE01-K11
Solid Core, 0.67”, Blue CDE01-L11
Solid Core, 0.67”, Red CDE01-R11
100:0.1A
Solid Core, 0.72”, Black CDA01-K12
www.leviton.com/les 105
VERIFEYE COMMUNICATION PRODUCTS
nergy Monitoring
E EMB Hub EMB HubLite High Density Flex I/O Module ModHopper
Hub (EMH) Pulse Module
TCP/IP
TCP/IP
PPP
PPP
Protocols
HTTP/HTML
HTTP/HTML
FTP ModBus RTU
FTP
NTP
NTP
XML
XML
SNMP-Trap
SNMP-Trap
BACnet IP
BACnet IP
pull data via HTTP, XML, FTP, or any custom protocol Collect meter data from
Use with ModHopper for multiple buildings over
Connect to web-based (IP-based) software wireless communication long distances
dashboards, energy information management “Self-managed” mesh
systems and demand response systems Push-or-pull meter data network keeps system
to VerifEye kiosks and functioning with high
software applications reliability
106
METERING COMMUNICATIONS SYSTEMS
To create a data network between Leviton submeters and stakeholders
(BAS, third party billing, Leviton Energy Manager software, etc.), Leviton
offers Metering Communication Systems. These solutions transmit data
from meters to end systems, creating a seamless transition between data
collection and data display. Leviton Metering Communications Systems
also enable facilities to create metering systems that can easily share data
through open protocols such as ModBus, and IP-based data transfer through
HTTP/FTP of .csv or XML files. The results are robust and reliable networks
scalable to accommodate future expansion, with data made accessible from
any internal or external location.
• Collects and logs data from connected wired or wireless devices based on
user-set intervals
• Pushes or pulls data via HTTP, XML, FTP or any custom protocol using an
Ethernet (LAN) connection
• No software required: information can be accessed through any web
browser in any location
• Plug and play connectivity EMB Hub*
ORDERING INFORMATION
DATA ACQUISITION HUBS*
DESCRIPTION CAT. NO.
EMB HubLite*
Energy Monitoring Hub – Configured for Leviton Energy Manager A8812-001
Energy Monitoring Hub – Non-Configured A8812-000
EMB Hub A8810-000
EMB HubLite A7810-000
Power Supply for EMB Hub and EMB HubLite YBM07-010
Refer to page 102 for the EMH+ Energy Monitoring HUB - features integrated meter and HUB.
www.leviton.com/les 107
INPUT/OUTPUT MODULES
HIGH DENSITY PULSE MODULE
The High Density Pulse Module provides a convenient way to expand a VerifEye metering system by connecting the HD Pulse
Module to an Energy Monitoring Hub (EMH) and/or ModHopper for system expansion. The HD Pulse Module accepts up to
23 standard pulse sensors and can function as a slave device with any ModBus master. This data can easily be integrated to
a network of other critical energy sensors to provide a comprehensive energy monitoring solution. The HD Pulse Module is
ideal for applications with a high density of pulse output devices, giving users access to meters that would previously require
multiple modules.
solution
• Field upgradable firmware for user-friendly future upgrades and expansion
ORDERING INFORMATION
INPUT/OUTPUT MODULES
DESCRIPTION CAT. NO.
High Density Pulse Module, 23 Inputs A8911-000
Flex I/O Module, 8 User Selectable Inputs, 2 Relay Outputs A8332-000
108
WIRELESS MODBUS/PULSE TRANSCEIVER
ModHopper
The ModHopper is designed with breakthrough mesh technology that makes connecting ModBus RTU (RS485) and pulse
devices simple and cost effective. Our “smart” ModHopper transceivers eliminate the need for costly wiring runs allowing
users to wirelessly capture meter data in the most challenging retrofit and campus environments. Collect meter points in
existing buildings with minimum down-time or disruption of day-to-day operations.
ORDERING INFORMATION
WIRELESS MODBUS/PULSE TRANSCEIVER
DESCRIPTION CAT. NO.
ModHopper and Power Supply R9120-500
ORDERING INFORMATION
NEMA COMMUNICATION BUNDLES
DESCRIPTION CAT. NO.
Energy Monitoring EMB Hub with Line Voltage Power Supply, NEMA 4X Enclosure A8810-PS1
Energy Monitoring EMB HubLite with Line Voltage Power Supply, NEMA 4X Enclosure A7810-PS1
HD Pulse Module with Line Voltage Power Supply, NEMA 4X Enclosure A8911-PS1
Flex I/O Module with Line Voltage Power Supply, NEMA 4X Enclosure A8332-PS1
www.leviton.com/les 109
VERIFEYE SOFTWARE PRODUCTS
Building Manager
BillSuite Energy Manager
Online (BMO) 2.0*
VerifEye™ Submetering Solutions
closet or individual unit for plotting energy information and and an instant alarm notification system
Generate bills from any PC— identifying anomalies and peak demand Produces customized reports to suit
requires Windows 7 or better in near real time precise requirements
Monthly and periodic billing reports for Uploads 15 minute interval data and Collects information from 1 to 60 min
any or all VerifEye submeters displays raw data in a line graph intervals for in-depth tracking
Energy profile to identify peak demand Reporting based on 15 min intervals
and energy waste
Export your 15 min interval data to .csv an enterprise to track and analyze goals
Eliminate uncertainty of variable utility
files and performance
costs
Configure VerifEye HUB communication Develop responsible environmental goals
Delegate energy usage accountability
products remotely and conservation measures while
to tenants
Add or change the data recording measuring and managing facility’s
Improve tenant satisfaction, retention carbon footprint
interval, alarm thresholds, even the
and property values
device name Provide outstanding communication
Identify and fix energy waste, reducing and support, enabling facilities to have
Graph up to 4 different parameters for
overall costs the most advanced and intuitive energy
trending patterns
management reporting in the industry
*VerifEye BMO 2.0 is included at no cost with the purchase of any VerifEye Data Acquisition Hub.
110
VERIFEYE SOFTWARE
SAVE ENERGY, REDUCE COSTS, BE SUSTAINABLE
VerifEye software solutions provide simple, effective, turn-key solutions to monitor energy in real time. Designed to
seamlessly integrate with VerifEye submetering hardware and communication systems, VerifEye software allows facilities
to introduce smarter energy management strategies, saving money and resources.
www.leviton.com/les 111
VERIFEYE BILLSUITE FEATURES
• Monitor energy consumption of each tenant or whole building on a 24x7 basis
• Meters can be in a basement, wire closet or individual unit
• Billing of each tenant from the convenience of your PC
• Monthly and periodic billing reports for any or all meters
• Energy profile to identify peak demand and energy waste
BILLSUITE SOFTWARE
DESCRIPTION CAT. NO.
15 Min Interval Data
BillSuite Software 1 - 50 Meters LBSSW-01L
BillSuite Software 51 - 100 Meters LBSSW-02L
BillSuite Software 101 - 200 Meters LBSSW-03L
BillSuite Software 201 - 300 Meters LBSSW-04L
BillSuite Software 301 - 400 Meters LBSSW-05L
BillSuite Software 401 - 550 Meters LBSSW-06L
BillSuite Software 551 - 750 Meters LBSSW-07L
VerifEye™ Submetering Solutions
Decision-makers everywhere are turning to VerifEye Solutions to get the information they need to make smart energy
choices. An advanced web based platform that provides real time data for your entire enterprise, VerifEye BMO 2.0 and
Energy Manager deliver the most sophisticated tools to drive energy efficiencies, reduce operating costs and create
more sustainable, environmentally sound facilities.
112
BUILDING MANAGER ONLINE (BMO) 2.0
www.leviton.com/les 113
ENERGY MANAGER SOFTWARE
• Simplified, easy to use with intuitive drilldown functionality
• Identify cost saving measures that can lead to greater profitability
• Discover energy inefficiencies that may be difficult to see
• Establish baselines, budgets and allocation of energy use & costs
within an enterprise
• Measure and monitor the enterprise’s carbon footprint
• Enhance LEED certification ratings with credits for measuring,
monitoring and verification
• Adopt best business practices for efficient energy use
Annual Report
• Track and trend consumption and site performance versus goals
• Highlight maintenance issues - identify sites and equipment that
need immediate attention
• Trend, compare and validate utility bills
• Provide outstanding communication and support enabling your
operations and management personnel to have the most
advanced, intuitive energy management reporting at their
fingertips in just 3 clicks!
VerifEye™ Submetering Solutions
ANNUAL RENEWAL
Energy Manager Software - Base License Program
Renewal – includes (8) control points and (1) user LEMSB-R00
account
Energy Manager Software – Specifier Version Renewal –
LEMSS-R00
includes (8) control points and (1) user account
Energy Manager Software – Additional User Account
LEMSU-R00
Renewal
Carbon Emissions Report
Energy Manager Software - Additional Points License
LEMSP-R00
Renewal – includes (8) control points
114
SERVICE AND SUPPORT DURING EVERY STEP OF THE PROCESS
There is much more to making lighting more energy efficient than just installing a simple device or two. System design,
product selection, installation and service: it has all got to come together. That’s where Leviton service and support
options come in. We’ll help you design your system and make the right product selections so you can create a lighting
control system that does exactly what you want it to do while saving electricity, meeting codes and standards, and even
garnering rebates.
It all starts with the Leviton sales representative. Our lighting control specialists are here to support you every step of the
way. They can perform on-site facility audits and suggest specific products and strategies for improving lighting energy
efficiency.
Leviton Support
easier than ever - use your smart device (Android, Apple, or
Blackberry) to enter audit information and your desktop to
generate ROI reports, analyses, Bill of Materials, and a submittal
package - go to www.leviton.com/dollarsandsensors
• Occupancy sensor layout services – have a team of experts create
occupancy sensor layouts directly on your CAD drawings, complete
with a List of Equipment at no cost – go to portal.leviton.com
• LightLogger® Program – get an accurate estimate of your
energy-savings potential with this exclusive payback analysis
tool – go to www.leviton.com/logger
• ez-Learn – access education tools from the comfort of your home
or office with this exclusive 24/7 online training – go to
www.leviton.com/ezlearn
• ASAP Lighting Design software – point-and-click software allows
you to quickly and simply design, specify and enter orders – go to
www.leviton.com/asap
• Lighting control specialists at your disposal
• Field service engineers for top-level support
• Factory commissioning service
• Dedicated technical support via phone at 800 959-6004
www.leviton.com/les 115
Leviton Manufacturing Co., Inc. Lighting & Energy Solutions
20497 SW Teton Avenue, Tualatin, OR 97062
tel 503-404-5500 fax 503-404-5594
tech line (6:00am–4:00pm PST Monday-Friday) 800-959-6004
Leviton International
G-8047D/H15-ak
REV AUG 2015
©2015 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission
The American Recovery And Reinvestment Act of 2009 (“ARRA”) provides federal grants and loans for projects throughout the country. Section 1605 of the Act, named the “Buy American” provision, requires
that certain materials and manufactured products used in projects funded by the Act be manufactured in the United States. The appearance of the Recovery Act Logo in relation to a Leviton product is only
intended to reflect that such product may be used in an ARRA funded project. It does not mean that such product or Leviton is sponsored or endorsed by, or that Leviton receives funds from, the federal
government or the Recovery Accountability and Transparency Board. Nothing in Leviton’s use of the logo is intended to suggest anything regarding the requirements for funding under ARRA.