Академический Документы
Профессиональный Документы
Культура Документы
This is a power meter and logger, it can handle up to 16A and exist in a couple of version with different
power connectors, I bought the version that works best around here. It has a couple of function: Measure
power, log energy consumption, turn devices on/off at specific times, turn off on fault conditions.
I got it from Aliexpress dealer Zhurui Technology Official Store
It is delivered in a colorful cardboard box that shows some screen shots from the device and list some
specifications.
User interface
The device as many function:
Measure power.
Measure and log energy.
Show price of energy.
Show month chart and table of energy comsumption and price.
Show year chart and table of energy comsumption and price.
Extra counter for short term measurements (Called OneShot).
Timers to control connected device on a schedule.
Alarm, can give a sound when power/current/voltage/temperature is too high.
Protection, can turn output off when power/current/voltage/temperature is too high.
This screen is the default, it will show just about everything on one screen.
The four buttons are:
Menu / enter key
Up / output on/off key
Down / serial number key
Back / reset OneShow key
The two next screens can be selected with arrow down. Number two screen focus one the OneShot
display and Number 3. screen shows all the power parameters (Nearly all of this information is already
present on the first screen).
Pressing on the menu key will open the menu, use arrow to move down and up and press menu/enter
again to select or open the second level of the menu.
It is easy to locate displays and settings with these menus.
Here is the monthly report in graphic and list form. Pressing the enter key will change between scaling
the chart in Wh and money with selected currrency and price. These chart exist in both monthly and
yearly versions.
The manual says something about storing data for 30 years, I decided not to test that and do not know
how far back it stores data.
I could not select our currency "kr" and I did not bother to adjust the price.
Timer 1 & 2 are advanced timers with week based settings, usual one must be used for on and the other
for off. Each of the other times (3-9) can do a on/off cycle either once or every day.
All settings menus with numbers and selections has a slight problem with the user interface: Arrows are
used to adjust numbers, this means enter is used to move to next digit, but in the selection box arrows
are used to move around, enter is only used when something need to be changed.
Both the Alarm and Protection menu have the same settings.
The auto recovery will automatic reconnected after a protection event, it will only do that once (no
infinite loop of connecting/disconnecting).
The charge rate can be either a fixed price for each kWh or based on time of day.
It only supports a limited number of currency names, but I do not see that as important.
To test I uses my Metrahit Energy meter after the PR10 logger, because the Metrahit do not use any
power (or very little) when measuring, the meters are supposed to show the same values.
The Metrahit is very good at measuring low power.
The PR10 need 0.1 watt before it will display any power and it need 5mA before it will display any
current.
Generally I am very impressed with how good it is at low power levels, this will often be a problem with
energy meters.
The precision looks good.
Note: The vacuum cleaner did not have a stable power consumption, i.e. the difference between PR10
and Metrahit is probably due to this (I did not read all the values at exactly the same time).
I also wanted to see whats inside this meter, it required removing four triangular screws.
A warning: Everything inside is connected directly to mains power, i.e. do not plug it in when it is open!
The plug and socket have their connections wired to the relay and the circuit board.
There is 3 circuit boards, one behind the relay, one with the power supply and the large one at the
bottom.
Here I have labeled some of the parts. I wonder about the copper color of the shunt (copper is rather
temperature sensitive and because of that not the best to make precision shunts from).
The backup battery is easy to replace (If you have a screwdriver that can open the meter).
Somebody have been a bit close to the plastic with a solder iron.
I am missing at least one part, it must be on the other side of the circuit board or maybe below the relay.
The missing part is the processor and maybe a power meter chip (Or it is part of the processor).
Conclusion
It is an impressive little meter.
It can be discussed if it have to many functions, but the user interface makes it fairly easy to get around
in all the settings and functions. Some settings requires a bit of work to adjust, but it is acceptable.
The precision is very good even at fairly low loads.
TRADUCCION 5 ENERO18
Se entrega en una caja de cartón colorida que muestra algunas capturas de pantalla del dispositivo y
enumera algunas especificaciones.
En la caja está el medidor, un manual de varias
páginas y una tarjeta de garantía.
Interfaz de usuario
El dispositivo funciona como muchos:
Mida la potencia.
Aquí está el informe mensual en forma de gráfico y lista. Al presionar la tecla Intro se cambiará entre
escalar el gráfico en Wh y dinero con la moneda y el precio seleccionados. Estas tablas existen tanto en
versiones mensuales como anuales.
El manual dice algo sobre el almacenamiento de datos durante 30 años, decidí no probarlo y no sé hasta
cuándo almacena datos.
No pude seleccionar nuestra moneda "kr" y no me molesté en ajustar el precio.
Los temporizadores 1 y 2 son temporizadores avanzados con ajustes basados en la semana, uno habitual
debe usarse para encendido y otro para apagado. Cada una de las otras veces (3-9) puede hacer un ciclo
de encendido / apagado ya sea una vez o todos los días.
Todos los menús de configuración con números y selecciones tienen un pequeño problema con la interfaz
de usuario: las flechas se usan para ajustar números, esto significa que se usa para moverse al siguiente
dígito, pero en el cuadro de selección se usan flechas para moverse, enter solo se usa cuando algo
necesita ser cambiado
Tanto el menú de Alarma como el de Protección tienen la misma configuración.
La recuperación automática se volverá a conectar automáticamente después de un evento de protección,
solo lo hará una vez (sin bucle infinito de conexión / desconexión).
La tarifa de carga puede ser un precio fijo por cada kWh o según la hora del día.
Solo admite una cantidad limitada de nombres de moneda, pero no veo eso como importante.
Mediciones
Consumo de energía cuando está inactivo con pantalla encendida y salida encendida: 2.2 vatios
Consumo de energía cuando está inactivo con pantalla apagada y salida encendida: 1,6 vatios
Consumo de energía cuando está inactivo con pantalla encendida y salida apagada: 1.1 vatios
Consumo de energía cuando está inactivo con pantalla apagada y salida apagada: 0,5 vatios
Lo anterior hace que la pantalla use 0.6 vatios y el relevo 1.1 vatios.
Para probar, utilizo mi medidor Metrahit Energy después del registrador PR10, ya que los Metrahit no
usan ninguna potencia (o muy poca) al medir, se supone que los medidores muestran los mismos
valores.
El Metrahit es muy bueno para medir baja potencia.
El PR10 necesita 0.1 vatios antes de que muestre potencia y necesita 5 mA antes de que muestre
cualquier corriente.
En general, estoy muy impresionado con lo bueno que es a bajos niveles de potencia, esto a menudo
será un problema con los contadores de energía.
La precisión se ve bien.
Nota: El aspirador no tenía un consumo de energía estable, es decir, la diferencia entre PR10 y Metrahit
probablemente se deba a esto (no leí todos los valores exactamente al mismo tiempo).
M1: 36,2 ° C, M2: 31,8 ° C, HS1: 36,8 ° C
El consumo de energía de 1,6 W cuando se ejecuta calienta el dispositivo un poco.
Demoler
También quería ver qué había dentro de este medidor, requería quitar cuatro tornillos triangulares.
Una advertencia: todo lo que está adentro está conectado directamente a la red eléctrica, es decir, ¡no lo
enchufes cuando esté abierto!
El enchufe y el zócalo tienen sus conexiones cableadas al relé y a la placa de circuito.
Hay 3 placas de circuito, una detrás del relé, una con la fuente de alimentación y la grande en la parte
inferior.
Aquí he etiquetado algunas de las partes. Me pregunto sobre el color de cobre de la derivación (el cobre
es bastante sensible a la temperatura y por eso no es el mejor para hacer derivaciones de precisión).
La batería de respaldo es fácil de reemplazar (si tiene un destornillador que puede abrir el medidor).
Alguien ha estado un poco cerca del plástico con una plancha de hierro.
Me falta al menos una parte, debe estar en el otro lado de la placa de circuito o quizás debajo del relé. La
parte faltante es el procesador y tal vez un chip de medidor de potencia (o es parte del procesador).
Conclusión
Es un pequeño medidor impresionante.
Se puede discutir si tiene muchas funciones, pero la interfaz de usuario hace que sea bastante fácil
moverse en todas las configuraciones y funciones. Algunas configuraciones requieren un poco de trabajo
para ajustarse, pero es aceptable.
La precisión es muy buena incluso con cargas bastante bajas.