Академический Документы
Профессиональный Документы
Культура Документы
II I
Product Data 8/18: 9455
Page 1 of 2
SHOTKAST® FS
Product Data
Apparent Porosity
After 230°F (110°C) 19.0%
After 1500°F (816°C) 20.0%
After 2000°F (1093°C) 18.0%
After 2500°F (1371°C) 20.0%
Creep
At 2372°F (1300°C), 28.4 lb/in.2 (0.2 MPa) Load,
14 to 24 Hours 0.0003%
Reversible Thermal Expansion
At 1830°F (1000°C) 0.3%
Note: The test data shown are based on average results on production samples and are subject to normal variation on individual tests. The test
data cannot be taken as minimum or maximum values for specification purposes. ASTM test procedures used when applicable.
Mixing and Using Information (Binder calculated at 10.76 lb/gallon) 55 lb bag 1000 lb bag 1500 lb bag
Binder Required—Pumping/Shotcreting (Weight 12.5%)
Pounds 6.9 125.0 187.5
Gallons 0.6 11.6 17.4
Liters 2.3 43.9 65.9
- 55 gallon drum of CS BINDER = 590 lbs.
- One 55 gallon drum for every 4,000 lb. of product
- Must use ACTIVATOR N. Approximate dosage level 0.5 – 1.0%
Note: CS BINDER and ACTIVATOR N must be protected from freezing. It must be stored above 40°F. If it freezes it cannot be used.
For detailed mixing and using instructions, contact your HWI sales representative or visit www.thinkHWI.com.
Heatup/Dryout Schedule
See HWI Dryout Schedule 17—NC Castables and Shotcretes.
Installation Guidelines
See HWI Installation Guidelines NC-1—NC Castables and Shotcretes—Standard
Shelf Life (Under Proper Storage Conditions) 365 days
Page 2 of 2