PIN CONNECTION DIMENSIONING AS PER EUROCODE xx: Data
Rekerence: Designed by mES)
Eurecode 3 UNI EN 19-7-82008§3.19Tab 3.10 Company: 20x xu
DATA Dee: 2a » IN Bannan
PIN CONNECTION DIMENSIONING AS PER EUROCODE
Reference: Designed by: 200°
Eurocode 3 UNI EN 1993-1-8:2005 § 3.13 Tab. 3.10 ‘Company: 2000
DATA Date: 200%
Pin
diameter, d= [16 |mm
Pin hole diameter, do = ine om (4,24)
Pin area, A = 201,062 mm?
Section bending resistance, W. = xd°/ 32 = 402,124 mm?
Pin material:
Material yield stress, f,, = 235 |Nimm*
Material ultimate stress, f,, = 360 |Nimm*
Plate (a)
Material yield stress, f,. =
Plate thickness, t, =
Elasticity modulus, E, =
Plate (b)
Material yield stress, f,, =
Plate thickness, t, =
Elasticity modulus, &, =
Ultimate Limit Forces
Shear, Fysa= 5 KN
Bending moment, Msa = Fy so/8 (tb+4c+2ta) = 27,1 Nm
Serviceability it Forces
Shear, Fisazew = aN)
Bending moment, Msa sew = 5.4. Nm
() If d,=d (no specific tolerances definition) itis assumed a default tolerance of 0.1mm
(**) Set zero if not applicableCoeficients (see national annexes)
a=
ye =
YMG. serv =0.5Fsq
—
S
@
#
PIN SHEAR RESISTANCE
Fy ra® 0.6 A tip! tua = 35 KN
Fy ra 2 Fy sa VERIFIED SF = 6.95
ratio = 0,14
PIN BENDING RESISTANCE
Mra = 1,5 Wei fyp! wa = 123 Nm
Maa 2 Mea VERIFIED | SF = 4,75
ratio = 0,21
If the pin is intendent to be reaplaced shall be also:
Mraser = 0,8 Wei fy! ye serv = 76 Nm
Maasern 2 Ma sen VERIFIED SF = 13,94
satio = 0,07