Академический Документы
Профессиональный Документы
Культура Документы
®
�
Power Flame’s The Power Flame Model AC head design produces full range
Versatile High Performance dual fuel burner presents optimum stable performance in both positive
Air or Steam Atomizing state-of-the-art design for maxi- or negative combustion chambers.
Light Oil Burner mum combustion efficiency and Operating system adjustments have
operating dependability. These been minimized to provide trouble-
packaged combustion systems free start up and operation.
will fire all types of gaseous fuels The Model AC provides efficient
Adjustable Premix Firing Head as well as #2 or similar distillate combustion without the aid of refrac-
Produces optimum fuel/air liquid fuels. The Model AC Air tory or other costly flame support
mixture within the premix Atomizing Burner fires #2 oil at devices. Options include the premix
combustion zone* turndowns up to 8:1, up to 10:1 and low gas pressure firing heads
on natural gas. Its flame retention for limited size combustion chamber
Circular Furnace Opening firing head incorporates a single configurations or low gas pressure
No special cutting of combustion air atomizing nozzle assembly for conditions. Modular design pro-
chamber front plate liquid fuels and a nozzle mix vides added flexibility for a wide
multiport combustor for gaseous range of optional features. All Power
fuels. Our unique Flame packaged combustion systems
air sandwich are factory fire-tested to ensure cost
firing effective installation and start up.
Low Gas Pressure Alpha SystemTM
Firing Head LED indicators, switches and
Added flexibility of operator annunciator. (Optional
application for low gas additional 6-light board shown on
pressure conditions* right.)
STANDARD EQUIPMENT
3450 RPM blower, panel with 2 lights & control switch
Pressure regulators, pilot and main gas cocks
Oil valve, nozzle assembly, manual fuel selector switch
Air safety switch & leakage test cock
Gas electric pilot and ignition transformer
ADDED FEATURES AC3-GO-20
AC3-GO-25 AC4-GO-25 AC5-GO-30(B) AC7-GO-30
X-Standard O-Optional NA-Not Available AC3-GO-25B AC4-GO-30 AC6-GO-30 AC8-GO-30
UV Flame Safeguard with prepurge & postpurge with interrupted pilot X X X X
Modulation with automatic air control X X X X
Integral 2 stage fuel unit X X NA NA
Remote mounted 2 stage fuel unit (single stage for AC6-AC8) O O X X
Dual gas A and dual oil safety valves X X X X
High and Low gas pressure switches X X X X
Air atomizing compressor set X X X X
Man/Auto switch - manual potentiometer X X X X
Conforms to UL 296 and UL 795 A 5,000 MBH and below may be replaced by one (1) proof of closure valve; above
5,000 MBH one (1) of the safety valves will include proof of closure feature.
1. Capacities listed are based on 0.20” W.C. positive pressure. For derates, see capacity curves.
2. At inlet to main manual shutoff cock to obtain P/F certified ratings with standard U.L. gas
train. Optional gas trains and combustion heads available for lower pressures.
† Integral Pump standard on AC3 and AC4, Remote Pump optional with 1/3 HP motor at 3450 RPM. AC5
through AC8 Remote Pump standard with 1/2 HP motor at 1750 RPM.
Represented
By:
Power Flame’s The Power Flame Model CG adjustments have been minimized
Versatile High Performance gas burner presents optimum to provide trouble free start up and
Gas Burner state-of-the-art design for maxi- operating performance.
mum combustion efficiency and The Model CG produces efficient
operating dependability. These combustion without the aid of refrac-
Adjustable Premix Firing Head packaged combustion systems tory or other costly flame support
Produces optimum fuel-air will fire natural gas and a full devices. Optional features include
mixture within the premix range of waste or other gaseous the premix and low gas pressure
combustion zone* fuels. The Model CG HTD (High firing heads for limited size combus-
Turndown) will fire natural gas at tion chamber configurations or low
turndowns up to 10 to 1. The gas pressure conditions. Modular
Circular Furnace Opening flame retention firing head incorp- design produces added flexibility
No special cutting of combustion orates the nozzle mix multiport for a wide range of optional fea-
chamber front plate combustor and unique air sand- tures. All Power Flame packaged
wich design to produce full range combustion systems are factory
stable performance in both fire-tested to ensure cost effective
positive or negative installation and start up.
combustion cham-
ber environments. Alpha System™
Low Gas Pressure LED indicators, switches and
Firing Head Operating
system operator annunciator. (Optional
Added flexibility of additional 6-light board shown on
application for low gas right.)
pressure conditions*
STANDARD EQUIPMENT
Alpha System™ LED (power, demand, main fuel, FSG
alarm, selectable) and control switch
Gas electric pilot and gas ignition transformer
Leakage test cock, pilot cock and main gas cock
Pilot and main gas pressure regulators
Air safety switch
ADDED FEATURES C1-G-10
C1-G-12
C2-G-20A C2-G-20B C3-G-20
C3-G-25
C4-G-25 C4-G-30
C5-G-30(B)
C7-G-30
C8-G-30
X-Standard O-Optional NA-Not Available C2-G-15 C3-G-25B C6-G-30
Flame Safeguard with UV and intermittent pilot X X NA NA NA NA NA
Flame Safeguard with UV and interrupted pilot O O X X X X X
On-Off diaphragm gas valve with fixed air control manual adjustment X NA NA NA NA NA NA
Low-Hi-Off motorized gas valve with automatic air control O X X X X NA NA
Low-Hi-Low motorized gas valve with automatic air control O O O O O NA NA
Modulation with automatic air control (Standard on all CG HTD) O O O O O X X
Dual gas safety valves A X X X X X X X
High and Low gas pressure switches O O X X X X X
Nova® Low NOx systems O O O O O O O
Customized control systems and accessories O O O O O O O
Man/Auto switch - manual potentiometer-modulation units X X X X X X X
Conforms to UL795 A 5,000 MBH and below may be replaced by one (1) proof of closure valve;
Above 5,000 MBH one (1) of the safety valves will include proof of closure feature.
Power Flame’s The Power Flame Model CGO stable performance in both positive
Versatile High Performance dual fuel burner presents optimum or negative combustion chambers.
Gas-Light Oil Burner state-of-the-art design for maxi- Operating system adjustments have
mum combustion efficiency and been minimized to provide trouble-
operating dependability. These free start up and operation.
packaged combustion systems The Model CGO provides efficient
will fire all types of gaseous fuels, combustion without the aid of refrac-
Adjustable Premix Firing Head as well as #2 or similar distillate tory or other costly flame support
Produces optimum fuel-air liquid fuels. The Model CGO HTD devices. Options include the premix
mixture within the premix (High Turndown) will fire natural and low gas pressure firing heads
combustion zone* gas at turndowns up to 10 to 1. for limited size combustion chamber
Circular Furnace Opening The flame retention firing head configurations or low gas pressure
No special cutting of combustion incorporates a single nozzle pres- conditions. Modular design pro-
chamber front plate sure atomizing assembly for liquid duces added flexibility for a wide
fuels and a nozzle mix multiport range of optional features. All Power
combustor for gaseous fuels. The Flame packaged combustion
unique air sandwich systems are factory fire-tested.
firing head design
produces Alpha System™
Low Gas Pressure LED indicators, switches and
Firing Head full range
operator annunciator. (Optional
Added flexibility of additional 6-light board shown on
application for low gas right.)
pressure conditions*
STANDARD EQUIPMENT
Alpha System™ LED indicators (power, demand, main fuel,
FSG alarm, customer selectable) & control switch
Pressure regulators, pilot and main gas cocks
Oil valve, nozzle assembly, manual fuel selector switch
Air safety switch & leakage test cock
Gas electric pilot and gas ignition transformer
ADDED FEATURES C1-GO-10
C1-GO-12
C3-GO-20
C3-GO-25
C4-GO-30 C7-GO-30
C5-GO-30(B) C8-GO-30
X-Standard O-Optional NA-Not Available C2-GO-15 C2-GO-20A C2-GO-20B C3-GO-25B C4-GO-25 C6-GO-30
Flame Safeguard with UV and prepurge with interrupted pilot X X AX AX AX AX AX
On-Off diaphragm gas valve with fixed air control manual adjustment X NA NA NA NA NA NA
Low-Hi-Off motorized gas valve with automatic air control O X X X X NA NA
Low-Hi-Low motorized gas valve with automatic air control O O O O O NA NA
Modulation with automatic air control O O O O O X X
Integral 2 stage fuel unit (C1, C2 single stage) X X X X X NA NA
Remote mounted 2 stage fuel unit (single stage for C6-C8) O O O O O X X
Dual gas B and dual oil safety valves X X X X X X X
High and Low gas pressure switches O O X X X X X
Direct spark ignition (oil) O O O O O O O
Low fire oil start with automatic air control O X X X X X X
Man/Auto switch - manual potentiometer - modulation only X X X X X X X
A Postpurge standard on C2-GO-20B and all C3 to C8 models B 5,000 MBH and below may be replaced by one (1) proof of closure valve; above
Conforms to UL 296 and UL 795 5,000 MBH one (1) of the safety valves will include proof of closure feature.