Академический Документы
Профессиональный Документы
Культура Документы
FIRST IMPRESSION
COUNTS
Clariant offers specific ranges of pigment
preparations for the shoe care industry. Products
from our Colanyl®, Flexonyl® and FM-BR gran.
pigment preparations ranges have been especially
selected and tested for the application in wax-
solvent based shoe polishes and aqueous shoe
care emulsions.
Granulated
pigment
preparations
in wax based shoe
polish
Colorants for wax based shoe polish Clariant offers an easy and convenient way of
Wax based shoe care products contain colorants, coloring wax-based shoe polish formulations:
various waxes and solvents. Colorants correct Products from our FM-BR gran. pigment preparation
defects on leather goods and refresh and enhance range have been especially selected and tested for
their original colors. Additionally various waxes use in wax-based shoe polish formulations. FM-BR
can be used, each wax giving specific properties gran. p igment preparations are supplied in granular
to the formulation as gloss, thermal stability and form. They are dust-free, show high flow capability,
homogeneity. and are suitable for wax-based systems. FM-BR gran.
preparations are based on organic and inorganic
Solvents like white spirit and turpentine can be pigments which have been dispersed and granulated
used alone or in combination. using Clariant´s technology. The base carrier is a
mixture of paraffin wax and stearic acid. This makes
it easy to incorporate the FM-BR gran. pigment pre
parations into the shoe care formulation during the
melted phase. A consistent and high quality is ensured
by our stringent quality control.
0.10 % FM-BR Red 400 gran. 0.97 % FM-BR Yellow 213 gran. 0.79 % FM-BR Yellow 213 gran.
2.91 % FM-BR Black 100 gran. 0.68 % FM-BR Red 400 gran. 0.19 % FM-BR Red 400 gran.
0.97 % FM-BR Black 100 gran. 0.10 % FM-BR Black 100 gran.
5
Aqueous pigment
preparations
in shoe polish emulsions
Colorants for shoe care emulsions Clariant offers a wide range of pigment
The purpose of shoe care emulsions is to protect, preparations for the coloration of the aqueous
to enhance and to refresh the colors of the surfaces. phase of shoe care emulsions:
The different properties are achieved by using In the following table, products from our Colanyl
very different types of waxes and additives. Polishing and Flexonyl pigment preparation ranges are featured,
emulsions can be liquid or solid, solvent-free or which have been especially selected and tested for
solvent-containing. the use in water-based shoe care emulsions.
Coloration with aqueous pigment preparations These are aqueous pigment preparations with high
is done either by adding it to the water phase or tinting strength based on organic and inorganic
by stirring them into the prepared wax emulsion. pigments which have been finely dispersed using
The point at which the pigment preparation is added Clariant´s technology. They are ready pumpable
is governed by the consistency of the emulsion and flowable and are manufactured without using
cream. Paste products are best colored while hot ethoxylated alkyl phenols (APEO).
and liquid using the remainder of the water.
3.00 % Flexonyl Black PR 100 0.60 % Colanyl Yellow HR 130 0.37 % Colanyl Yellow HR 130
0.46 % Flexonyl Carmine SP-FBB 0.09 % Flexonyl Carmine SP-FBB
0.10 % Flexonyl Black PR 100 0.11 % Flexonyl Black PR 100
This is just a small extract from our broad Clariant portfolio. For more information and
special requirements Clariant´s Technical Service Team will assist you. Please contact
our Technical Application Center in your region.
7
Clariant International Ltd
Rothausstrasse 61
4132 Muttenz
Switzerland
www.pigments.clariant.com
www.clariant.com
This information corresponds to the present state of our knowledge and is intended as a general
description of our products and their possible applications. Clariant makes no warranties, express or
implied, as to the information’s accuracy, adequacy, sufficiency or freedom from defect and assumes
no liability in connection with any use of this information. Any user of this product is responsible for
determining the suitability of Clariant’s products for its particular application. * Nothing included in this
information waives any of Clariant’s General Terms and Conditions of Sale, which control unless it agrees
DP 6197 E | 09.2012
otherwise in writing. Any existing intellectual/industrial property rights must be observed. Due to possible
changes in our products and applicable national and international regulations and laws, the status of our
products could change. Material Safety Data Sheets providing safety precautions, that should be observed
when handling or storing Clariant products, are available upon request and are provided in compliance
with applicable law. You should obtain and review the applicable Material Safety Data Sheet information
before handling any of these products. For additional information, please contact Clariant.
* For sales to customers located within the United States and Canada the following applies in addition:
NO EXPRESS OR IMPLIED WARRANTY IS MADE OF THE MERCHANTABILITY, SUITABILITY,
FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE OF ANY PRODUCT OR SERVICE.