Академический Документы
Профессиональный Документы
Культура Документы
Operation Manual
DEH-P9850BT
Contents
2 En
Contents
English
Displaying text information on MP3/WMA/ – Changing the Phone Book display
AAC/WAV disc 28 order 40
– When playing back an MP3/WMA/AAC – Calling a number in the Phone
disc 28 Book 40
– When playing back a WAV disc 28 – Assign genres to phone numbers 40
Scrolling text information in the display 28 – Editing the name of a Phone Book
Selecting tracks from the file name list 29 entry 41
Displaying jacket arts on CD-ROM discs 29 – Editing phone numbers 42
– Reading jacket arts 29 – Selecting the icon of a Phone Book
– Selecting folders with jacket arts 30 entry 42
– Clearing a Phone Book entry 43
Bluetooth Telephone – Using preset numbers 43
Hands-free phoning with cellular phones Clearing memory 43
featuring Bluetooth wireless Using the Call History 44
technology 31 – Displaying the Call History 44
About the telephone source 32 – Calling a number from the Call
– Standby mode 32 History 45
Setting up for hands-free phoning 32 – Assigning preset numbers 45
Basic operation of hands-free phoning 33 Making a call by entering phone number 45
– Making a phone call 33 Echo canceling and noise reduction 46
– Taking a phone call 34 Changing the ring tone 46
Introduction of advanced hands-free phoning Setting the automatic rejecting 47
operation 35 Setting the automatic answering 47
Connecting a cellular phone 35 Selecting the icon for user phone 47
– Searching for available cellular Displaying BD (Bluetooth Device)
phones 36 address 47
– Using a cellular phone to initiate a – Displaying BD address of your cellular
connection 36 phone 48
Disconnecting a cellular phone 37 – Displaying BD address of this unit 48
Registering connected cellular phone 37 Displaying system version for repair 48
Deleting a registered phone 37
Connecting to a registered cellular Bluetooth Audio
phone 38 Listening to songs on BT Audio (Bluetooth
– Connecting to a registered phone audio player) 49
manually 38 Setting up for Bluetooth audio player 49
– Connecting to a registered phone Connecting a Bluetooth audio player 50
automatically 38 Function operation 51
Using the Phone Book 39 Playing songs on Bluetooth audio player 51
– Transferring entries to the Phone Pausing a song 51
Book 39 Stopping playback 51
Disconnecting a Bluetooth audio player 52
En 3
Contents
4 En
Contents
English
– Adjusting low pass filter attenuation Switching the Ever Scroll 87
slope 74 Calibrating the RPMs 87
Using the high pass filter 75 Activating the BT Audio source 87
– Muting the speaker units (filters) 75 Entering PIN code for Bluetooth wireless
– Setting the high pass filter for front connection 88
speakers 75 Resetting the Bluetooth wireless technology
– Setting the high pass filter for rear module 88
speakers 76
Using the auto-equalizer 76 Other Functions
Using the equalizer 76 Turning the clock display on or off 89
– Recalling equalizer curves 76 Using the AUX source 89
– Adjusting equalizer curves 77 – About AUX1 and AUX2 89
– Adjusting 16-band graphic – Selecting AUX as the source 89
equalizer 77 – Setting the AUX title 89
Using BBE sound 78 Using different entertainment displays 90
Using compression and BMX 78 – Setting the entertainment display 90
Adjusting loudness 79 – Setting the background display 91
Adjusting source levels 79 Rewriting the entertainment displays and the
Using auditory user interface 79 icons for telephone functions 92
Auto TA and EQ (auto-time alignment and Additional Information
auto-equalizing) 80 Understanding built-in CD player error
– Before operating the auto TA and EQ messages 93
function 80 Understanding auto TA and EQ error
– Carrying out auto TA and EQ 81 messages 93
Initial Settings Understanding error message on rewriting
Adjusting initial settings 83 the entertainment displays 94
Selecting the display language 83 CD player and care 94
Setting the date 83 CD-R/CD-RW discs 94
Setting the clock 84 Dual Discs 95
Setting the FM tuning step 84 MP3, WMA, AAC and WAV files 95
Setting the AM tuning step 84 – MP3 additional information 96
Switching the warning tone 85 – WMA additional information 96
Switching the face auto open 85 – AAC additional information 96
Switching the auxiliary setting 85 – WAV additional information 97
Switching the dimmer setting 85 About folders and MP3/WMA/AAC/WAV
Adjusting the brightness 85 files 97
Correcting distorted sound 86 Terms 99
Switching the sound muting/attenuation 86 Specifications 101
Switching the feature demo 86
Switching the reverse mode 87
En 5
Section
About this unit you read and observe WARNINGs and CAU-
TIONs in this manual.
CAUTION
! Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, this unit damage, smoke, and overheat Features
could result from contact with liquids. CD playback
! Keep this manual handy as a reference for op- Music CD/CD-R/CD-RW playback is possible.
erating procedures and precautions.
! Always keep the volume low enough so that MP3 file playback
you can hear sounds from outside the vehicle. You can play back MP3 files recorded on CD-
! Protect this unit from moisture. ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2
! If the battery is disconnected or discharged, standard recordings).
the preset memory will be erased and must be ! Supply of this product only conveys a li-
reprogrammed. cense for private, non-commercial use and
! If this unit does not operate properly, contact does not convey a license nor imply any
your dealer or nearest authorized Pioneer Ser- right to use this product in any commercial
vice Station. (i.e. revenue-generating) real time broad-
casting (terrestrial, satellite, cable and/or
any other media), broadcasting/streaming
Operating environment via internet, intranets and/or other net-
This unit should be used within the tempera- works or in other electronic content distri-
ture ranges shown below. bution systems, such as pay-audio or
Operating temperature range: –10 °C to +60 audio-on-demand applications. An inde-
°C (14 °F to 140 °F) pendent license for such use is required.
EN300328 ETC test temperature: –20 °C and For details, please visit
+55 °C (–4 °F and 131 °F) http://www.mp3licensing.com.
6 En
Section
English
Hands-free phoning ! Depending on the version of Windows Media
This unit realizes effortless hands-free phoning Player used to encode WMA files, album
with Bluetooth wireless technology. names and other text information may not be
correctly displayed.
Bluetooth audio player compatibility ! There may be a slight delay when starting
When you use this unit with a Bluetooth audio playback of WMA files encoded with image
player featuring Bluetooth wireless technol- data.
ogy, you can control the Bluetooth audio
player.
About Bluetooth
The Windows Media™ logo printed on the box
indicates that this unit can play back WMA
data.
WMA is short for Windows Media Audio and
refers to an audio compression technology
that is developed by Microsoft Corporation.
WMA data can be encoded by using Windows
Media Player version 7 or later. Bluetooth is a short-range wireless radio con-
Windows Media and the Windows logo are tra- nectivity technology that is developed as a
demarks or registered trademarks of Microsoft cable replacement for mobile phones, hand-
Corporation in the United States and/or other held PCs and other devices. Bluetooth oper-
countries. ates in 2.4 GHz frequency range and transmits
voice and data at speeds up to 1 megabit per
second. Bluetooth was launched by a special
Notes
interest group (SIG) that comprises of Ericsson
! This unit may not operate correctly depending Inc., Intel Corp., Nokia Corp., Toshiba and IBM
on the application used to encode WMA files. in 1998, and it is currently developed by nearly
2 000 companies worldwide.
En 7
Section
! The Bluetooth word mark and logos are 3 Turn MULTI-CONTROL to select
owned by the Bluetooth SIG, Inc. and any Phone reset.
use of such marks by Pioneer Corporation Phone reset appears in the display.
is under license. Other trademarks and
trade names are those of their respective 4 Push MULTI-CONTROL right to show a
owners. confirmation display.
Clear memory YES is displayed. Clearing
memory is now on standby.
# If you do not want to reset phone memory,
Resetting the microprocessor press BAND.
The microprocessor must be reset under the 5 Press MULTI-CONTROL to clear the
following conditions: memory.
! Prior to using this unit for the first time All data in the telephone source, including
after installation Phone Book entries, number presets and the
! If the unit fails to operate properly Call History is cleared.
! When strange or incorrect messages ap-
pear on the display
8 En
Section
English
! A few seconds after turning the ignition 2 Replace the front panel by clipping it
switch to on or off, the front panel automati- into place.
cally moves. When this happens, your fingers
may become jammed in the panel, so keep
your hands away from it.
Reverse mode
If you do not perform an operation within
about 30 seconds, screen indications start to
reverse, and then continue reversing every 10
seconds. Pressing BAND when power to this
3 Put the front panel into provided pro- unit is turned off while the ignition switch is
tective case for safe keeping. set to ACC or ON cancels the reverse mode.
Press BAND again to start the reverse mode.
En 9
Section
Feature demo mode ! Do not store the battery with metallic materi-
als.
The feature demo automatically starts when
! In the event of battery leakage, wipe the re-
power to this unit is turned off while the igni-
mote control completely clean and install a
tion switch is set to ACC or ON. Pressing
new battery.
DISPLAY during feature demo operation can-
! When disposing of used batteries, please
cels the feature demo mode. Press DISPLAY
comply with governmental regulations or en-
again to start the feature demo mode. Remem-
vironmental public institutions’ rules that
ber that if the feature demo continues operat-
apply in your country/area.
ing when the car engine is turned off, it may
drain battery power.
10 En
Section
English
Play mode (repeat play)—Random mode
(random play)—Scan mode (scan play)—
Pause (pause)—Search mode (search meth-
od)—Title Input (disc title input)—Jacket art
(jacket art read)
Note
Refer to Introduction of advanced built-in CD
player operation on page 20.
Note
Refer to Introduction of audio adjustments on
page 71.
En 11
Section
02 What’s What
1 23 4 5 6 7
b a 9 8
6 MULTI-CONTROL
Move to perform manual seek tuning, fast
Remote control
forward, reverse and track search controls. Operation is the same as when using the but-
Also used for controlling functions. tons on the head unit.
Turn to increase or decrease the volume.
c VOLUME buttons
7 LIST button Press to increase or decrease the volume.
Press to display the disc title list, track title
list, folder list, file list or preset channel list d FUNCTION button
depending on the source. Press to select functions.
12 En
Section
What’s What 02
English
c 9 d j ON HOOK button
While operating the phone source, press to
end a call or reject an incoming call.
k ATT button
m Press to quickly lower the volume level, by
a about 90%. Press once more to return to the
l e
k original volume level.
j
i
l ENTERTAINMENT button
f Press to change to the entertainment dis-
h g play.
m AUDIO button
Press to select various sound quality con-
trols.
e Joystick
Move to perform manual seek tuning, fast
forward, reverse and track search controls.
Also used for controlling functions.
Functions are the same as
MULTI-CONTROL except for volume con-
trol.
f DIRECT button
Press to directly select the desired track.
g CLEAR button
Press to cancel the input number when 0–9
are used.
h 0–9 buttons
Press to directly select the desired track,
preset tuning or disc. Buttons 1–6 can oper-
ate the preset tuning for the tuner or disc
number search for the multi-CD player.
En 13
Section
03 Basic Operations
Selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc Loading a disc
in the unit (refer to page 19). 1 Press EJECT to open the front panel.
CD loading slot appears.
% Press SOURCE to select a source. # After a CD has been inserted, press SOURCE
Press SOURCE repeatedly to switch between to select the built-in CD player.
the following sources:
Tuner—Television—DVD player/Multi- 2 Insert a CD into the CD loading slot.
DVD player—Built-in CD player—Multi- Front panel is closed automatically, and play-
CD player—iPod—External unit 1—Exter- back will start.
nal unit 2—AUX1—AUX2—Telephone— ! With jacket art function on, jacket arts on
BT Audio CD-ROM disc are automatically read in this
unit when the disc is inserted. To cancel
Notes reading jacket arts, press BAND. For de-
tails, refer to Reading jacket arts on page 29.
! In the following cases, the sound source will
not change: CD loading slot
— When there is no unit corresponding to the
selected source connected to this unit.
— When there is no disc in the unit.
— When there is no disc in the DVD player.
— When there is no magazine in the multi-
CD player.
— When there is no magazine in the multi-
DVD player.
— When the AUX (auxiliary input) is set to off # You can eject a CD by pressing EJECT.
(refer to page 85).
— When the BT Audio source is set to off Notes
(refer to Activating the BT Audio source on
page 87). ! The built-in CD player plays one standard, 12-
! External unit refers to a Pioneer product (such cm or 8-cm CD at a time. Do not use an adap-
as one available in the future) that, although ter when playing 8-cm CDs.
incompatible as a source, enables control of ! Do not insert anything other than a CD into
basic functions by this unit. Two external units the CD loading slot.
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
14 En
Section
Basic Operations 03
English
! There is sometimes a delay between starting
up CD playback and the sound being issued.
When being read, Format read is displayed.
! If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting it again.
! When the CD loading or ejecting function
does not operate properly, you can eject the
CD by pressing and holding EJECT while
opening the front panel.
! If an error message such as ERROR-11 is dis-
played, refer to Understanding built-in CD
player error messages on page 93.
En 15
Section
04 Tuner
2 LOC indicator
Shows when local seek tuning is on.
3 Band indicator
Shows which band the radio is tuned to, AM
or FM.
5 Frequency indicator
Shows the frequency to which the tuner is
tuned.
16 En
Section
Tuner 04
English
Introduction of advanced Storing and recalling
tuner operation broadcast frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
En 17
Section
04 Tuner
18 En
Section
Built-in CD Player 05
English
Playing a CD 3 To skip back or forward to another
track, push MULTI-CONTROL left or right.
Pushing MULTI-CONTROL right skips to the
1 2 start of the next track. Pushing
MULTI-CONTROL left once skips to the start
of the current track. Pushing again will skip to
the previous track.
Note
3
When a CD TEXT disc is inserted, the disc title
automatically begins to scroll in the display.
These are the basic steps necessary to play a
When Ever Scroll is set to ON at the initial setting,
CD with your built-in CD player. More ad-
the disc title scrolls continuously. Refer to Switch-
vanced CD operation is explained starting on
ing the Ever Scroll on page 87.
the next page.
2 To perform fast forward or reverse, After entering the number input mode, if you do
push and hold MULTI-CONTROL left or not perform an operation within about eight sec-
right. onds, the mode is automatically canceled.
# If you select Rough search, pushing and hold-
ing MULTI-CONTROL left or right enables you to
search every 10 tracks in the current disc. (Refer
to Selecting the search method on page 21.)
En 19
Section
05 Built-in CD Player
Repeating play
There are two repeat play ranges for the built-
1 in CD player: Disc repeat (disc repeat) and
Track repeat (one-track repeat).
1 Function display
Shows the function status. 1 Use MULTI-CONTROL to select
Play mode in the function menu.
1 Press MULTI-CONTROL to display the Play mode appears in the display.
main menu.
FUNCTION, AUDIO and ENTERTAINMENT 2 Press MULTI-CONTROL to select the re-
appear on the display. peat range.
Press MULTI-CONTROL repeatedly until the
2 Use MULTI-CONTROL to select desired repeat range appears in the display.
FUNCTION. ! Disc repeat – Repeat the current disc
Turn to change the menu option; press to se- ! Track repeat – Repeat just the current
lect. track
The function name appears on the display.
Note
3 Turn MULTI-CONTROL to select the
If you perform track search or fast forward/re-
function.
verse during Track repeat, the repeat play range
Turn MULTI-CONTROL clockwise or counter-
changes to Disc repeat.
clockwise to switch between the functions in
the following order:
Play mode (repeat play)—Random mode
(random play)—Scan mode (scan play)—
Pause (pause)—Search mode (search meth- Playing tracks in random order
od)—Title Input (disc title input)—Jacket art Random play lets you play back tracks on the
(jacket art read) CD in a random order.
# To return to the playback display, press BAND.
1 Use MULTI-CONTROL to select
Notes Random mode in the function menu.
Random mode appears in the display.
! When playing a CD TEXT disc, you cannot
switch to Title Input. The disc title will have
2 Press MULTI-CONTROL to turn random
already been recorded on a CD TEXT disc.
play on.
! When playing audio data (CD-DA), it is not ef-
Tracks will play in a random order.
fective even if you turn Jacket art on. (Refer to
# To turn random play off, press
page 29.)
MULTI-CONTROL again.
20 En
Section
Built-in CD Player 05
English
Scanning tracks of a CD Selecting the search method
Scan play lets you hear the first 10 seconds of You can switch the search method between
each track on the CD. fast forward/reverse and searching every 10
tracks.
1 Use MULTI-CONTROL to select
Scan mode in the function menu. 1 Use MULTI-CONTROL to select
Scan mode appears in the display. Search mode in the function menu.
Search mode appears in the display.
2 Press MULTI-CONTROL to turn scan play
on. 2 Press MULTI-CONTROL to select the
The first 10 seconds of each track is played. search method.
Press MULTI-CONTROL until the desired
3 When you find the desired track press search method appears in the display.
MULTI-CONTROL to turn scan play off. ! FF/REV – Fast forward and reverse
The track will continue to play. ! Rough search – Searching every 10
# If the display has automatically returned to tracks
the playback display, select Scan mode again by
using MULTI-CONTROL.
En 21
Section
05 Built-in CD Player
1 Play the CD that you want to enter a 7 Press BAND to return to the playback
title for. display.
22 En
Section
Built-in CD Player 05
English
Displaying disc titles than 24 letters, you can scroll the text informa-
You can display the text information of any tion as follows.
disc that has had a disc title entered. ! When the source icon is turned off, this
unit can display the first 30 letters of text in-
% Press DISPLAY. formation.
Press DISPLAY repeatedly to switch between
the following settings: % Press DISPLAY and hold until the text
: disc title—Simple display information begins to scroll through the
display.
The titles scroll.
Some discs have certain information encoded When Ever Scroll is set to ON at the initial setting,
on the disc during manufacture. These discs text information scrolls continuously in the dis-
may contain such information as the CD title, play. Refer to Switching the Ever Scroll on page 87.
track title, artist’s name and playback time
and are called CD TEXT discs. Only these spe-
cially encoded CD TEXT discs support the Selecting tracks from the track
functions listed below. title list
Track title list lets you see the list of track titles
on a CD TEXT disc and select one of them to
Displaying text information on play back.
CD TEXT discs
You can display the text information of any 1 Press LIST to switch to the track title list
disc that has had a disc title entered. mode.
En 23
Section
06 MP3/WMA/AAC/WAV Player
24 En
Section
MP3/WMA/AAC/WAV Player 06
English
! Playback is carried out in order of file number. Note
Folders are skipped if they contain no files. (If
folder 01 (ROOT) contains no files, playback After entering the number input mode, if you do
commences with folder 02.) not perform an operation within about eight sec-
! When playing back files recorded as VBR onds, the mode is automatically canceled.
(variable bit rate) files, the play time will not be
correctly displayed if fast forward or reverse
operations are used.
! When playing back MP3 files recorded as VBR
(variable bit rate) files, the bit rate value is not
displayed even after switching to bit rate.
(VBR will be displayed.)
! When playing back WMA files recorded as
VBR (variable bit rate) files, the average bit
rate value is displayed.
! There is no sound on fast forward or reverse.
! When an MP3/WMA/AAC/WAV disc is in-
serted, folder name automatically begins to
scroll in the display. When Ever Scroll is set to
ON at the initial setting, folder name scrolls
continuously. About Ever Scroll, refer to
Switching the Ever Scroll on page 87.
1 Press DIRECT.
Track number input display appears.
3 Press DIRECT.
The track of entered number will play.
En 25
Section
06 MP3/WMA/AAC/WAV Player
26 En
Section
MP3/WMA/AAC/WAV Player 06
English
3 Press MULTI-CONTROL to turn random Pausing MP3/WMA/AAC/
play on.
Tracks will play in a random order within the
WAV playback
previously selected Folder repeat or Pause lets you temporarily stop playback of
Disc repeat ranges. the MP3/WMA/AAC/WAV.
# To turn random play off, press
MULTI-CONTROL again. 1 Use MULTI-CONTROL to select Pause in
the function menu.
Pause appears in the display.
En 27
Section
06 MP3/WMA/AAC/WAV Player
1 Select the search method Rough search. # Depending on the version of iTunes® used to
Refer to Selecting the search method on the write MP3 files onto a disc, comment information
previous page. may not be correctly displayed.
# Depending on the version of Windows Media
2 Push and hold MULTI-CONTROL left or Player used to encode WMA files, album names
right to search every 10 tracks in the cur- and other text information may not be correctly
rent folder. displayed.
# If the current folder contains less than 10
tracks, pushing and holding MULTI-CONTROL
right recalls the last track of the folder. Also, if the When playing back a WAV disc
remaining number of tracks after searching every
% Press DISPLAY.
10 tracks is less than 10, pushing and holding
Press DISPLAY repeatedly to switch between
MULTI-CONTROL right recalls the last track of
the following settings:
the folder.
: folder name— : file name— : folder
# If the current folder contains less than 10
name and : file name—Simple display
tracks, pushing and holding MULTI-CONTROL
# If specific information has not been recorded
left recalls the first track of the folder. Also, if the
on a WAV disc, name is not displayed.
remaining number of tracks after searching every
# You can only play back WAV files in the fre-
10 tracks is less than 10, pushing and holding
quencies 16, 22.05, 24, 32, 44.1 and 48 kHz
MULTI-CONTROL left recalls the first track of the
(LPCM), or 22.05 and 44.1 kHz (MS ADPCM). The
folder.
sampling frequency shown in the display may be
rounded.
28 En
Section
MP3/WMA/AAC/WAV Player 06
English
Notes Displaying jacket arts on
! Unlike MP3, WMA and AAC file format, WAV CD-ROM discs
files display only the folder name and the file If jacket arts are recorded on CD-ROM disc,
name. you can display them on this unit so you can
! When Ever Scroll is set to ON at the initial set- easily find a specific folder looking at the jack-
ting, text information scrolls continuously in et art.
the display. Refer to Switching the Ever Scroll ! Record jacket arts for folders on CD-ROM
on page 87. in advance using your computer. For de-
tails, please visit the following site:
http://www.pioneer.co.jp/car/pclink4/index-
e.html
Selecting tracks from the ! Jacket arts (max. 15 images) directly be-
file name list neath the ROOT folder can be read. If
images have been recorded on the lower
File name list lets you see the list of file names tier than the ROOT folder, these images are
(or folder names) and select one of them to not displayed. In this case, preset images
playback. are displayed. Refer to About folders and
MP3/WMA/AAC/WAV files on page 97.
1 Press LIST to select the file name list
mode.
Press LIST repeatedly to switch between the
Reading jacket arts
following lists:
Folder/file name list—jacket art list—playback With this function on, jacket arts on CD-ROM
display disc are automatically read in this unit when
the disc is inserted.
2 Use MULTI-CONTROL to select the de- ! Up to 15 jacket arts can be read in this unit.
sired file name (or folder name). ! Reading jacket arts can take approx. 40
Turn to change the name of file or folder; seconds. If the disc is reloaded, this unit
press to play; push right to see a list of the read jacket arts again from the beginning.
files (or folders) in the selected folder. ! Jacket arts are not displayed if MIXED-
# You can also change the name of file or folder MODE CD or partial CD is inserted into this
by pushing MULTI-CONTROL up or down. unit.
# To return to the previous list (the folder one ! For other folders with no jacket arts re-
level higher), push MULTI-CONTROL left. corded, this unit automatically assigns pre-
# If the folder/file number is more than 100, last set images to them.
2-digit of the folder/file number is displayed.
# Number of the folders/files in the currently se- 1 Use MULTI-CONTROL to select
lected folder will be indicated on the right side of Jacket art in the function menu.
the display. Jacket art appears in the display.
# If you do not operate the list within about 30
seconds, the file name list mode is canceled 2 Press MULTI-CONTROL to turn jacket art
automatically. read on.
# To turn jacket art function off, press
MULTI-CONTROL again.
En 29
Section
06 MP3/WMA/AAC/WAV Player
30 En
Section
Bluetooth Telephone 07
English
Hands-free phoning with case, the signal level indicator does not
appear.
cellular phones featuring
Bluetooth wireless technology 3 Automatic answering/Automatic reject-
ing indicator
Shows AUTO when the automatic answer-
12 3 4 5
ing function is on (for more details, refer to
Setting the automatic answering on page
47).
Shows REF when the automatic rejecting
function is on (for more details, refer to Set-
ting the automatic rejecting on page 47).
7 6
4 Incoming call notice indication
If your cellular phone features Bluetooth wire- Shows when an incoming call has been re-
less technology, you can connect to this unit ceived and not checked yet.
for hands-free, wireless calls, even while driving.
5 Device name
Important Shows the device name of the cellular
phone.
! Since this unit is on standby to connect with
your cellular phones via Bluetooth wireless 6 Calendar display
technology, using this unit without running Shows the date, and time.
the engine can result in battery drainage.
! When phone is selected as a source, no audio 7 User number indicator
adjustments, except balance adjustment, are Shows the registration number of the cellu-
possible. lar phone.
En 31
Section
07 Bluetooth Telephone
1 Connection
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless tech-
32 En
Section
Bluetooth Telephone 07
English
Basic operation of hands- 1 Push MULTI-CONTROL up or down to
select a preset number.
free phoning Preset numbers Dial preset 1–10 appear in
These are the basic operations to use hands- the display.
free phoning via Bluetooth wireless technol- # You can also recall preset numbers
ogy. More advanced hands-free phoning op- Dial preset 1–10 by pressing 0–9 on the remote
erations are explained starting on Introduction control.
of advanced hands-free phoning operation on # If the number is already in the Phone Book
page 35. then the name is also displayed.
# No data is displayed for preset numbers that
have not been assigned.
Making a phone call
2 Press MULTI-CONTROL to make a call.
Dial a number
# You can also perform this operation by press-
The most basic way to make a call is to simply ing OFF HOOK on the remote control.
dial the number.
En 33
Section
07 Bluetooth Telephone
34 En
Section
Bluetooth Telephone 07
English
Introduction of advanced If connected but not registered yet
Disconnect phone (disconnect phone)—
hands-free phoning operation Set phone (registering phone)—
Delete phone (delete phone)—
Phone book transfer (phone book transfer)—
Number dial (call by entering number)—
Refuse calls (automatic reject setting)—
Auto answer (automatic answer setting)—
Ring tone (ring tone select)—Auto connect
1 (automatic connection setting)—Echo cancel
(echo cancel)—Device INFO. (device informa-
1 Function display tion)
Shows the function status. If already connected and registered
Disconnect phone (disconnect phone)—
1 Press MULTI-CONTROL to display the Delete phone (delete phone)—
main menu. Phone book transfer (phone book transfer)—
FUNCTION, AUDIO and ENTERTAINMENT Phone book name view (phone book name
appear on the display. view)—Clear memory (clear memory)—
Number dial (call by entering number)—
2 Use MULTI-CONTROL to select Refuse calls (automatic reject setting)—
FUNCTION. Auto answer (automatic answer setting)—
Turn to change the menu option; press to se- Ring tone (ring tone select)—Auto connect
lect. (automatic connection setting)—Echo cancel
Function names for hands-free phoning ap- (echo cancel)—Telephone icon (telephone
pear on the display. icon)—Device INFO. (device information)
# Phone book name view and
3 Turn MULTI-CONTROL to change func- Telephone icon cannot be selected for cellular
tions. phone registered guest phone.
Turn MULTI-CONTROL clockwise or counter- # If cellular phone is connected to this unit via
clockwise to switch between the functions. Bluetooth wireless technology with HSP (Head
Function names that appear in the display are Set Profile), Phone book name view,
different depending on your cellular phone’s Clear memory, Number dial and Refuse calls
connection and registration status. cannot be selected.
If not connected yet # To return to the playback display, press
Search & connect (search and connect)— BAND.
Connection open (connection open)—
Connect phone (connect phone)—
Delete phone (delete phone)—
Phone book transfer (phone book transfer)—
Refuse calls (automatic reject setting)—
Connecting a cellular phone
Auto answer (automatic answer setting)— To use a phone wirelessly with this unit, it is
Ring tone (ring tone select)—Auto connect necessary first to establish a connection using
(automatic connection setting)—Echo cancel Bluetooth wireless technology. There are sev-
(echo cancel)—Device INFO. (device informa- eral ways you can do this.
tion)
En 35
Section
07 Bluetooth Telephone
36 En
Section
Bluetooth Telephone 07
English
# The link code is set to 0000 as default. You 2 Push MULTI-CONTROL up or down to
can change this code in the initial setting. Refer select a registration assignment.
to Entering PIN code for Bluetooth wireless con- Each time MULTI-CONTROL is pushed up or
nection on page 88. down, the registration assignment is switched
in the following order:
Phone1 (user phone 1)—Phone2 (user phone
2)—Phone3 (user phone 3)—Guest1 (guest
Disconnecting a cellular phone phone 1)—Guest2 (guest phone 2)
# As you select each assignment, you can see
When you are done using your phone with this
whether or not a phone is already registered
unit, you can close the Bluetooth wireless con-
there. If the assignment is empty, No data is dis-
nection.
played. If the assignment is already taken, the de-
vice name appears. If you want to replace an
1 Use MULTI-CONTROL to select
assignment with a new phone, first delete the
Disconnect phone in the function menu.
current assignment. For more detailed instruc-
Disconnect phone, and device name of the
tions, see Deleting a registered phone on this
connected phone appear in the display.
page.
# If you need to know the BD (Bluetooth Device)
2 Press MULTI-CONTROL to disconnect a
address of the phone, push MULTI-CONTROL left
cellular phone from this unit.
here.
After the disconnection is completed,
Disconnected is displayed.
3 Press MULTI-CONTROL to register the
cellular phone to this unit.
When the registration is completed,
Reg. completed is displayed.
Registering connected
cellular phone
You can register a phone that is temporarily
connected to this unit in order to take full ad- Deleting a registered phone
vantage of the features available with Blue- If you no longer need to use a registered
tooth wireless technology. A total of five phone with this unit, you can delete it from the
phones can be registered: three user cellular registration assignment for another phone.
phones and two guest phones. When regis- ! If a registered phone is deleted from this
tered as a user phone, all the possible func- unit, the Phone Book and other settings of
tions are available for use. When registered as that phone are cleared simultaneously.
a guest phone, some functions are limited.
1 Use MULTI-CONTROL to select
1 Use MULTI-CONTROL to select Delete phone in the function menu.
Set phone in the function menu. Delete phone appears in the display.
Set phone appears in the display.
En 37
Section
07 Bluetooth Telephone
38 En
Section
Bluetooth Telephone 07
English
1 Use MULTI-CONTROL to select ! With some cellular phones, it may not be
Auto connect in the function menu. possible to transfer whole phone book at a
Auto connect appears in the display. time. In this case, transfer phone book en-
tries one by one from your phone by using
2 Press MULTI-CONTROL to turn auto- your cellular phone.
matic connection on. ! Depending on the cellular phone con-
ON appears in the display. nected via Bluetooth wireless technology,
If your cellular phone is set ready for Bluetooth this unit cannot display the Phone Book
wireless connection, the connection to this correctly. (Some characters may be
unit will be automatically established. garbled.)
# To turn automatic connection off, press ! If the phone book in the cellular phone con-
MULTI-CONTROL again. tains image data, phone book may not be
correctly transferred.
Note
1 Use MULTI-CONTROL to select
Automatic connection is performed in the regis- Phone book transfer in the function menu.
tration number order. Phone book transfer appears in the display.
En 39
Section
07 Bluetooth Telephone
40 En
Section
Bluetooth Telephone 07
English
2 Use MULTI-CONTROL to display the de- 4 Turn MULTI-CONTROL clockwise or
tailed list of your desired Phone Book counterclockwise to switch to the name
entry. input screen.
See step 2 to 5 on Calling a number in the Turning MULTI-CONTROL switches input
Phone Book on the previous page for how to screens in the following order:
do this. Edit genre (genre input screen)—Edit name
(name input screen)—Edit number (number
3 Press and hold MULTI-CONTROL to dis- input screen)—Edit icon (icon selection
play the genre input screen. screen)—Clear memory (clear memory
Edit genre is displayed. screen)
En 41
Section
07 Bluetooth Telephone
2 Use MULTI-CONTROL to display the de- 1 Press LIST to display the Phone Book.
tailed list of your desired Phone Book
entry. 2 Use MULTI-CONTROL to display the de-
See step 2 to 5 on Calling a number in the tailed list of your desired Phone Book
Phone Book on page 40 for how to do this. entry.
See step 2 to 5 on Calling a number in the
3 Press and hold MULTI-CONTROL to dis- Phone Book on page 40 for how to do this.
play the genre input screen.
Edit genre is displayed. 3 Press and hold MULTI-CONTROL to dis-
play the genre input screen.
4 Turn MULTI-CONTROL clockwise or Edit genre is displayed.
counterclockwise to switch to the number
input screen. 4 Turn MULTI-CONTROL clockwise or
Turning MULTI-CONTROL switches input counterclockwise to switch to the icon se-
screens in the following order: lection screen.
Edit genre (genre input screen)—Edit name Turning MULTI-CONTROL switches input
(name input screen)—Edit number (number screens in the following order:
input screen)—Edit icon (icon selection Edit genre (genre input screen)—Edit name
screen)—Clear memory (clear memory (name input screen)—Edit number (number
screen) input screen)—Edit icon (icon selection
screen)—Clear memory (clear memory
5 Push MULTI-CONTROL left or right to screen)
move the cursor to the number you want
to change. 5 Push MULTI-CONTROL left or right to
select an icon.
6 Push MULTI-CONTROL up or down to Each time MULTI-CONTROL is pushed left or
change numbers. right, the icons are switched in the following
Repeat these steps until you have finished order:
changing. icon 1 (icon 1)—icon 2 (icon 2)—icon 3 (icon
3)—icon 4 (icon 4)—icon 5 (icon 5)
7 Press MULTI-CONTROL to store the new
number. 6 Press MULTI-CONTROL to assign the
After the number is stored, the display reverts icon to the Phone Book entry.
to the detailed list. The selected icon is assigned to the Phone
Book entry, and the display reverts to the de-
tailed list.
42 En
Section
Bluetooth Telephone 07
English
Note 6 Press MULTI-CONTROL to delete the
Phone Book entry.
You can rewrite icons of Phone Book entries. Cleared is displayed.
(Refer to Rewriting the entertainment displays and The Phone Book entry is deleted. The display
the icons for telephone functions on page 92.) returns to Phone Book entry list.
En 43
Section
07 Bluetooth Telephone
44 En
Section
Bluetooth Telephone 07
English
Calling a number from the Call Assigning preset numbers
History You can assign up to ten frequently called
1 Display the list and select a phone num- phone numbers to number presets
ber. (Dial preset 1–10).
Display the phone number you want to make a
call. 1 Display the list and select a phone num-
ber.
2 Push MULTI-CONTROL right to display Display the phone number you want to store
the detailed list. in memory.
Calling time and date, and phone number are
displayed in the detailed list. 2 Push MULTI-CONTROL right to display
# If the number is already in the Phone Book the detailed list.
then the name is also displayed. Calling time and date, and phone number are
displayed in the detailed list.
3 Press MULTI-CONTROL to make a call.
3 Press and hold one of 0–9 on the re-
4 To end the call, press PHONE. mote control to store the selected phone
The estimated call time appears in the display number in that preset.
(this may differ slightly from the actual call The selected phone number has been stored
time). in memory. The next time you press the same
preset button, the phone number is recalled
from memory.
Calling an international number # Up to 50 phone numbers (10 phone numbers
from the Call History for each of the three registered phones and two
When calling an international number stored guest phones) can be stored in memory.
in the Call History, proceed the country code
with a +.
En 45
Section
07 Bluetooth Telephone
46 En
Section
Bluetooth Telephone 07
English
Setting the automatic Selecting the icon for user
rejecting phone
If this function is on, this unit automatically re- You can select one of icons to be displayed for
jects all incoming calls. telephone source.
! This feature cannot be set for each different A different icon can be assigned for each dif-
user phone. ferent user phone.
En 47
Section
07 Bluetooth Telephone
Displaying BD address of your pears. About the system version, refer to Display-
cellular phone ing system version for repair on this page.
Note
When you push MULTI-CONTROL down while
the BD address (or the device name) of this unit
is displayed, the system version of this unit ap-
48 En
Section
Bluetooth Audio 08
English
Listening to songs on BT Audio ing on your cellular phone as much as
possible. If you try operating on your cellular
(Bluetooth audio player) phone, the signal from your cellular phone
may cause a noise on the song playback.
1 2 ! When you are talking on the cellular phone
connected to this unit via Bluetooth wireless
technology, the song playback from your Blue-
tooth audio player connected to this unit is
muted.
! Even if while you are listening to song on your
Bluetooth audio player you switch to another
You can use this unit to control a separately source, the playback of song continues to
sold portable audio player featuring Bluetooth elapse.
wireless technology (Bluetooth audio player).
Even though your audio player does not con- 1 Connection indicator
tain a Bluetooth module, you can still control Shows the Bluetooth wireless connection
it from this unit via Bluetooth wireless technol- status.
ogy using a Bluetooth adapter (sold sepa-
rately). 2 Device name
Shows the device name of the connected
Important Bluetooth audio player (or Bluetooth adap-
ter).
! This unit can control a Bluetooth audio player
via A2DP or AVRCP profile. Bluetooth audio % Press SOURCE to select Bluetooth audio
players (or Bluetooth adapters) compatible player.
with those profiles can be connected to this Press SOURCE until you see BT Audio dis-
unit. played.
— A2DP profile (Advanced Audio Distribution # If you cannot display BT Audio, first activate
Profile): Only playing back songs on your the BT audio source in the initial setting. For de-
audio player is possible. tailes, refer to Activating the BT Audio source on
— AVRCP profile (Audio/Video Remote Con- page 87.
trol Profile): Playing back, pausing, select-
ing songs, etc., are possible.
! Since there are a number of Bluetooth audio
players available on the market, operations
with your Bluetooth audio player using this
Setting up for Bluetooth
unit vary in great range. Please refer to the in- audio player
struction manual that came with your Blue- Before you can use Bluetooth audio player
tooth audio player as well as this manual you will need to set up the unit for use.
while operating your player on this unit.
! Information about songs (e.g. the elapsed 1 Activation
playing time, song title, song index, etc.) can- Refer to Activating the BT Audio source on
not be displayed on this unit. page 87 for instructions on how to turn the
! While you are listening to songs on your Blue- BT Audio on.
tooth audio player, please refrain from operat-
En 49
Section
08 Bluetooth Audio
Connecting a Bluetooth
audio player
For this unit to control your Bluetooth audio
player it needs to establish a Bluetooth wire-
less connection.
This function initiates the connection via Blue-
tooth wireless technology.
50 En
Section
Bluetooth Audio 08
English
Function operation Notes
! If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the playback display.
! Depending on Bluetooth audio players con-
nected to this unit, function operations may
not be correctly operated.
1
1 Function display
Shows the function status.
Playing songs on Bluetooth
Once connected via Bluetooth wireless tech- audio player
nology, “Play”, “Stop” and other functions on 1 Use MULTI-CONTROL to select Play in
Bluetooth audio player can be controlled from the function menu.
this unit’s function menu. Play appears in the display.
En 51
Section
08 Bluetooth Audio
52 En
Section
Multi-CD Player 09
English
Playing a CD until the disc number appears in the dis-
play.
En 53
Section
09 Multi-CD Player
1
50-disc multi-CD player 1 Function display
Only those functions described in this manual Shows the function status.
are supported by 50-disc multi-CD players.
This unit is not designed to operate disc title 1 Press MULTI-CONTROL to display the
list functions with a 50-disc multi-CD player. main menu.
About the disc title list functions, please refer FUNCTION, AUDIO and ENTERTAINMENT
to Selecting discs from the disc title list on appear on the display.
page 58.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
Notes
! When playing a CD TEXT disc on a CD TEXT
compatible multi-CD player, you cannot
switch to disc title input. The disc title will
have already been recorded on a CD TEXT
disc.
54 En
Section
Multi-CD Player 09
English
! If you do not operate the function within about 2 Use MULTI-CONTROL to select
30 seconds, the display is automatically re- Random mode in the function menu.
turned to the playback display. Random mode appears in the display.
En 55
Section
09 Multi-CD Player
56 En
Section
Multi-CD Player 09
English
Erasing a track from your ITS 3 Push MULTI-CONTROL down to erase
playlist all tracks on the currently playing CD from
your ITS playlist.
You can delete a track from your ITS playlist if
All tracks on the currently playing CD are
ITS play is on.
erased from your playlist and
If ITS play is already on, skip to step 2. If ITS
Memory deleted is displayed.
play is not already on, use MULTI-CONTROL.
4 Press BAND to return to the playback
1 Play the CD with the track you want to
display.
delete from your ITS playlist, and turn ITS
play on.
Refer to Playback from your ITS playlist on the
previous page. Using disc title functions
You can input CD titles and display the titles.
2 Use MULTI-CONTROL to select
Then you can easily search for and play a de-
ITS memory in the function menu.
sired disc.
ITS memory appears in the display.
Erasing a CD from your ITS playlist 3 Press DISPLAY to select the desired
character type.
You can delete all tracks of a CD from your ITS
Press DISPLAY repeatedly to switch between
playlist if ITS play is off.
the following character types:
1 Play the CD that you want to delete. Alphabet (upper case), numbers and symbols
Push MULTI-CONTROL up or down to select —Alphabet (lower case)—European letters,
the CD. such as those with accents (e.g. á, à, ä, ç)—
Numbers and symbols
2 Use MULTI-CONTROL to select
ITS memory in the function menu.
ITS memory appears in the display.
En 57
Section
09 Multi-CD Player
58 En
Section
Multi-CD Player 09
English
Displaying text information on 1 Press LIST to switch to the disc title list
CD TEXT discs mode during the playback display.
# If you want to display the track title list of the
% Press DISPLAY. currently playing disc, push MULTI-CONTROL
Press DISPLAY repeatedly to switch between right.
the following settings:
: disc title— : disc artist name— : track 2 Use MULTI-CONTROL to select the de-
title— : track artist name— : disc title and sired disc title of CD TEXT.
: disc artist name— : track title and : Turn to change the disc title; press to play.
track artist name—Simple display # You can also change the disc title by pushing
# If specific information has not been recorded MULTI-CONTROL up or down.
on a CD TEXT disc, title or name is not displayed. # If no title has been entered for a disc,
No D.Title will be displayed.
# No Disc is displayed next to the disc number
Scrolling text information in when there is no disc in the magazine.
the display
This unit can display the first 24 letters of disc 3 Push MULTI-CONTROL right to switch
title, disc artist name, track title and track ar- to the track title list.
tist name. When the text information is longer # Push MULTI-CONTROL left to return to the
than 24 letters, you can scroll the text informa- disc title list.
tion as follows.
4 Use MULTI-CONTROL to select the de-
! When the source icon is turned off, this
sired track title.
unit can display the first 30 letters of text in-
Turn to change the track title; press to play.
formation.
# You can also change the track title by pushing
% Press DISPLAY and hold until the text MULTI-CONTROL up or down.
information begins to scroll through the # If you do not operate the list within about 30
display. seconds, the track title list mode is canceled
The titles scroll. automatically.
Note
When Ever Scroll is set to ON at the initial setting,
text information scrolls continuously in the dis-
play. Refer to Switching the Ever Scroll on page 87.
En 59
Section
Listening to songs on your of the current song. Pushing again will skip to
the previous song.
iPod
1 2
Browsing for a song
The operation of this unit to control an iPod is
designed to be as close to the operation of the
iPod as possible for easy operation and song
search.
3
1 Press LIST to switch to the top menu of
You can use this unit to control an iPod adapter, the list search.
which is sold separately.
These are the basic steps necessary to operate 2 Use MULTI-CONTROL to select a cate-
an iPod adapter. More advanced iPod adapter gory.
operation is explained starting on Introduction Turn to change the category; press to select.
of advanced iPod adapter operation on page 62. Playlists (playlists)—Artists (artists)—
Albums (albums)—Songs (songs)—Genres
1 Song number indicator (genres)
Shows the number of song played in the se- List from the selected category is displayed.
lected list. # You can start playback throughout the se-
lected category by pressing and holding
2 Play time indicator MULTI-CONTROL.
Shows the elapsed playing time of the cur- # You can also change the category by pushing
rent song. MULTI-CONTROL up or down.
# You can also select the category by pushing
3 Album title indicator MULTI-CONTROL right.
Shows the title of the currently playing # To return to the previous list, push
album. MULTI-CONTROL left.
# To go to the top menu of the list search, push
1 Press SOURCE to select the iPod. and hold MULTI-CONTROL left.
Press SOURCE until you see iPod displayed. # If you do not operate the list within about 30
seconds, the list search is cancelled automati-
2 To perform fast forward or reverse, cally.
push and hold MULTI-CONTROL left or
right.
60 En
Section
English
Searching for a song 4 Use MULTI-CONTROL to select a song
from the selected playlist.
1 Press LIST to switch to the top menu of
Turn to change the song; press to play.
the list search.
# If no songs have been stored in playlist, STOP
is displayed and playback stops.
2 Use MULTI-CONTROL to select a Genres,
Artists, Albums or Songs from among the
categories.
Turn to change the category; press to select.
List from the selected category is displayed. Displaying text
information on iPod
3 Use MULTI-CONTROL to select a song, Text information recorded on the iPod can be
album, artist or genre. displayed.
Turn to change the item; press to select.
List from the selected item is displayed. % Press DISPLAY.
# If you select Songs (songs), playback starts in-
Press DISPLAY repeatedly to switch between
stantly from the selected one. the following settings:
: album title— : song title— : artist name
4 Repeat step 3 to find a song you want — : artist name and : album title— :
to listen to. song title and : artist name— : song title
and : album title—Simple display
# If the characters recorded on the iPod are not
Selecting a playlist compatible with this unit, those characters will
You can select a playlist from your iPod play- not be displayed.
list.
Notes
1 Press LIST to switch to the top menu of
the list search. ! You can scroll to the left the text information
by pressing and holding DISPLAY.
2 Use MULTI-CONTROL to select a ! When Ever Scroll is set to ON at the initial set-
Playlists from among the categories. ting, text information scrolls continuously in
Turn to change the category; press to select. the display. Refer to Switching the Ever Scroll
List from Playlists (playlists) is displayed. on page 87.
En 61
Section
Introduction of advanced peat one song) and Repeat all (repeat all
songs in the list).
iPod adapter operation ! While Play mode is set to Repeat one, you
cannot select the other songs.
62 En
Section
English
Pausing a song
Pause lets you temporarily stop playback of a
song.
En 63
Section
11 TV tuner
1 Band indicator
Shows which band the TV tuner is tuned to.
3 Channel indicator
Shows which channel the TV tuner is tuned.
64 En
Section
TV tuner 11
English
Introduction of advanced 2 Use MULTI-CONTROL to store the se-
lected station in memory.
TV tuner operation Turn to change the preset number; press and
hold to store.
The preset number you have selected will
flash and then remain lit. The selected station
has been stored in memory.
# If you do not operate the list within about 30
seconds, the preset channel list mode is can-
1 celed automatically.
1 Function display
Notes
Shows the function status.
! Up to 24 stations, 12 for each of two TV bands,
1 Press MULTI-CONTROL to display the can be stored in memory.
main menu. ! You can also store stations assigned to preset
FUNCTION, AUDIO and ENTERTAINMENT tuning numbers 1–6 by pressing and holding
appear on the display. one of the preset tuning buttons 1–6 on the re-
mote control.
2 Use MULTI-CONTROL to select
FUNCTION.
BSSM appears on the display.
# To return to the channel display, press BAND. Storing the strongest
broadcast stations
Note
sequentially
If you do not operate the function within about 30
seconds, the display is automatically returned to
1 Use MULTI-CONTROL and select
the channel display.
FUNCTION to display BSSM.
En 65
Section
11 TV tuner
Note
Storing broadcast stations with BSSM may re-
place broadcast stations you have saved using
P01–P12.
Notes
! You can also recall stations assigned to preset
tuning numbers by pushing MULTI-CONTROL
up or down during the channel display.
! You can also recall stations assigned to preset
tuning numbers 1–6 by pressing one of the
preset tuning buttons 1–6 on the remote con-
trol.
66 En
Section
DVD Player 12
English
Playing a disc 5 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1 2 3 4
1 Press SOURCE to select the DVD player/
multi-DVD player.
Press SOURCE until you see DVD displayed.
En 67
Section
12 DVD Player
Repeating play
1
! During PBC playback of Video CDs, this
function cannot be operated.
1 Function display
Shows the function status.
1 Use MULTI-CONTROL to select
Play mode in the function menu.
1 Press MULTI-CONTROL to display the
Play mode appears in the display.
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
2 Press MULTI-CONTROL to select the re-
appear on the display.
peat range.
During DVD video playback
2 Use MULTI-CONTROL to select
Press MULTI-CONTROL repeatedly until the
FUNCTION.
desired repeat range appears in the display.
Turn to change the menu option; press to se-
! Disc repeat – Repeat the current disc
lect.
! Chapter repeat – Repeat just the current
The function name appears on the display.
chapter
! Title repeat – Repeat just the current title
3 Turn MULTI-CONTROL to select the
During Video CD or CD playback
function.
Press MULTI-CONTROL repeatedly until the
Turn MULTI-CONTROL clockwise or counter-
desired repeat range appears in the display.
clockwise to switch between the functions in
! Disc repeat – Repeat the current disc
the following order:
! Track repeat – Repeat just the current
During DVD video or Video CD playback
track
Play mode (repeat play)—Pause (pause)
During MP3/WMA playback
During CD playback
Press MULTI-CONTROL repeatedly until the
Play mode (repeat play)—Random mode
desired repeat range appears in the display.
(random play)—Scan mode (scan play)—
! Disc repeat – Repeat the current disc
Pause (pause)—ITS play mode (ITS play)—
! Folder repeat – Repeat the current folder
ITS memory (ITS input)—Title Input (disc
! Track repeat – Repeat just the current
title input)
track
During MP3/WMA playback
Play mode (repeat play)—Random mode
(random play)—Scan mode (scan play)— Notes
Pause (pause) ! If you select other discs during repeat play,
# To return to the playback display, press BAND. the repeat play range changes to Disc repeat.
68 En
Section
DVD Player 12
English
! During video CD or CD playback, if you per- Scanning tracks of a CD/
form track search or fast forward/reverse dur-
ing Track repeat, the repeat play range MP3/WMA
changes to Disc repeat. ! You can operate this function during CD/
! During MP3/WMA playback, if you select an- MP3/WMA playback.
other folder during repeat play, the repeat play
range changes to Disc repeat. 1 Use MULTI-CONTROL to select
! During MP3/WMA playback, if you perform Scan mode in the function menu.
track search or fast forward/reverse during Scan mode appears in the display.
Track repeat, the repeat play range changes
to Folder repeat. 2 Press MULTI-CONTROL to turn scan play
on.
The first 10 seconds of each track is played.
Pausing disc playback 3 When you find the desired track press
MULTI-CONTROL to turn scan play off.
1 Use MULTI-CONTROL to select Pause in The track will continue to play.
the function menu. # If the display has automatically returned to
Pause appears in the display. the playback display, select Scan mode again by
using MULTI-CONTROL.
2 Press MULTI-CONTROL to turn pause
on.
Playback of the current track pauses.
# To turn pause off, press MULTI-CONTROL
again.
Using ITS playlist and disc
title functions
! You can operate these functions only when
a multi-DVD player is connected to this
Playing tracks in random order unit.
! You can operate this function during CD/ ! This function differs slightly from ITS play-
MP3/WMA playback. back with a multi-CD player. With multi-
DVD player, ITS playback applies only to the
1 Use MULTI-CONTROL to select CD playing. For details, refer to Using ITS
Random mode in the function menu. playlists on page 56.
Random mode appears in the display.
En 69
Section
12 DVD Player
70 En
Section
Audio Adjustments 13
English
Adjusting the audio easily Introduction of audio
The following functions let you easily adjust adjustments
your audio system to match the car interior
acoustic characteristics, which vary depend-
ing on the type of car.
! Recalling equalizer curves
! Using the position selector (Position)
! Adjusting equalizer curves
1
En 71
Section
13 Audio Adjustments
72 En
Section
Audio Adjustments 13
English
Front 25 to Rear 25 is displayed as the front/ Adjusting the time alignment
rear speaker balance moves from front to rear. You can adjust the distance between each
# Front/Rear 0 is the proper setting when only speaker and the selected position.
two speakers are used.
! An adjusted time alignment is memorized
in Custom.
3 Push MULTI-CONTROL left or right to
adjust left/right speaker balance. 1 Use MULTI-CONTROL to select
Each time MULTI-CONTROL is pushed left or TA Mode.
right, the left/right speaker balance moves to- TA Mode appears in the display.
wards the left or right.
Left 25 to Right 25 is displayed as the left/ 2 Press MULTI-CONTROL to select a unit
right speaker balance moves from left to of distance.
right. Each press of MULTI-CONTROL selects the
unit of distance in the following order:
cm (centimeter)—inch (inch)
En 73
Section
13 Audio Adjustments
74 En
Section
Audio Adjustments 13
English
1 Use MULTI-CONTROL to select ! If you mute the selected speaker unit (fil-
Subwoofer3. ter), MUTE ON is displayed and no adjust-
Subwoofer3 appears in the display. ments are possible.
# When the subwoofer output is on, you can se- ! Even if any speaker unit (filter) is muted,
lect Subwoofer3. you can adjust the parameters for other
speaker units (filters).
2 Push MULTI-CONTROL up or down to
select the phase of subwoofer output. 1 Use MULTI-CONTROL to select
Push MULTI-CONTROL up to select normal Front HPF (or Rear HPF).
phase and appears in the display. Push Front HPF (or Rear HPF) appears in the dis-
MULTI-CONTROL down to select reverse play.
phase and appears in the display.
2 Push and hold MULTI-CONTROL down
3 Push MULTI-CONTROL left or right to to mute the selected speaker unit (filter).
select slope. MUTE ON is displayed.
Each time MULTI-CONTROL is pushed left or # To cancel the muting, push MULTI-CONTROL
right, slopes are selected in the following up.
order:
–18— –12— –6 (dB/oct.)
Setting the high pass filter for
Note front speakers
When slope of subwoofer and high pass filter are 1 Use MULTI-CONTROL to select
–12dB, and same cut-off frequency, the phase is Front HPF.
reversed 180 degrees at the cut-off frequency. In Front HPF appears in the display.
this case, reversing the phase assures improved
sound continuity. 2 Push MULTI-CONTROL left or right to
select slope.
Each time MULTI-CONTROL is pushed left or
right, slopes are selected in the following
Using the high pass filter order:
–12— –6—Pass (0) (dB/oct.)
When you do not want low sounds from the # If you set the slope to 0 dB/oct. (Pass), the
subwoofer output frequency range to play audio signal bypasses the filter, so the filter does
from the front or rear speakers, turn on the not have an effect.
HPF (high pass filter). Only frequencies higher
than those in the selected range are outputted 3 Turn MULTI-CONTROL to select
from the front or rear speakers. Front HPF FREQ.
Front HPF FREQ. appears in the display.
En 75
Section
13 Audio Adjustments
76 En
Section
Audio Adjustments 13
English
Display Equalizer curve
2 Push MULTI-CONTROL left or right to
select an equalizer curve.
Powerful Powerful Each time MULTI-CONTROL is pushed left or
Natural Natural right, equalizer curves are selected in the fol-
Vocal Vocal
lowing order:
Powerful—Natural—Vocal—Flat—Custom1
Flat Flat —Custom2—Super Bass
Custom1 Custom 1
Custom2 Custom 2
3 Push MULTI-CONTROL up or down to
adjust the equalizer curve.
Super Bass Super bass Each time MULTI-CONTROL is pushed up or
down, the equalizer curve increases or de-
! Custom1 and Custom2 are adjusted equal-
creases respectively.
izer curves that you create. Adjustments
+6 to –6 is displayed as the equalizer curve is
can be made with a 16-band graphic equal-
increased or decreased.
izer.
# The actual range of the adjustments are differ-
! When Flat is selected no supplement or
ent depending on which equalizer curve is se-
correction is made to the sound. This is
lected.
useful to check the effect of the equalizer
# The equalizer curve with all frequencies set to
curves by switching alternatively between
0 cannot be adjusted.
Flat and a set equalizer curve.
En 77
Section
13 Audio Adjustments
78 En
Section
Audio Adjustments 13
English
3 Push MULTI-CONTROL left or right to 3 Push MULTI-CONTROL up or down to
select the desired setting. adjust the source volume.
Each time MULTI-CONTROL is pushed left or Each time MULTI-CONTROL is pushed up or
right, settings are selected in the following down, source volume increases or decreases.
order: +4 to –4 is displayed as the source volume is
COMP 1—COMP 2—BMX 1—BMX 2 increased or decreased.
Notes
! The AM tuner volume level can also be ad-
Adjusting loudness justed with source level adjustments.
Loudness compensates for deficiencies in the ! The built-in CD player and the multi-CD player
low- and high-sound ranges at low volume. are set to the same source level adjustment
volume automatically.
1 Use MULTI-CONTROL to select ! External unit 1 and external unit 2 are set to
Loudness. the same source level adjustment volume
Loudness appears in the display. automatically.
En 79
Section
13 Audio Adjustments
80 En
Section
Audio Adjustments 13
English
— When delays occur for low sounds due
to the influence of the LPF on active
subwoofers or external amps.
! Auto TA and EQ changes the audio settings
as below:
— The fader/balance settings return to the
center position. (Refer to page 72.)
— The graphic equalizer curve switches to
Flat. (Refer to page 76.)
— When a subwoofer is connected to this
unit, it will be adjusted automatically to 3 Turn the ignition switch to ON or ACC.
both subwoofer output and high pass fil- If the car’s air conditioner or heater is turned
ter setting for rear speaker. on, turn it off. Noise from the fan in the air
! If you carry out auto TA and EQ when a pre- conditioner or heater may prevent correct auto
vious setting of this already exists, the set- TA and EQ.
ting will be replaced. # Press SOURCE to turn the source on if this
unit is turned off.
Carrying out auto TA and EQ 4 Select the position for the seat on
which the microphone is placed.
CAUTION
Never use the microphone for hands-free phon- Refer to Using the position selector on page
ing to operate the auto TA and EQ. Using the mi- 72.
crophone unfit for the auto TA and EQ may # If no position is selected before you start auto
damage the speaker. Be sure to connect the TA and EQ, Front Left is selected automatically.
AUTO TA&EQ microphone into the microphone 5 Press SOURCE and hold until the unit
input jack. turns off.
1 Stop the car in a place that is as quiet If anything is connected to the microphone
as possible, close all doors, windows and input jack, disconnect it.
the sun roof, and then turn the engine off. 6 Press and hold EQ to enter the auto TA
If the engine is left running, engine noise may and EQ measurement mode.
prevent correct auto TA and EQ.
7 Plug the microphone into the micro-
2 Fix the supplied microphone in the cen- phone input jack on this unit.
ter of the headrest of the driver’s seat, fa-
cing forward, using the belt (sold
separately).
The auto TA and EQ may differ depending on
where you place the microphone. If desired,
place the microphone on the front passenger
seat to carry out auto TA and EQ.
En 81
Section
13 Audio Adjustments
82 En
Section
Initial Settings 14
English
Adjusting initial settings Selecting the display language
For your convenience, this unit equips multi-
ple language display. You can select the lan-
guage best suited to your first language.
Using the initial settings, you can customize 2 Press MULTI-CONTROL to select the lan-
various system settings to achieve optimal per- guage.
formance from this unit. Each press of MULTI-CONTROL selects lan-
guages in the following order:
1 Function display English—Español—Português
Shows the function status.
En 83
Section
14 Initial Settings
3 Push MULTI-CONTROL up or down to ! Even when the sources are off, the clock dis-
set the date. play appears on the display. Pressing CLOCK
Pushing MULTI-CONTROL up will increase when the sources and feature demo are off,
the selected day, month or year. Pushing turns the clock display on or off.
MULTI-CONTROL down will decrease the se-
lected day, month or year.
84 En
Section
Initial Settings 14
English
2 Press MULTI-CONTROL to select the AM Switching the auxiliary setting
tuning step.
Pressing MULTI-CONTROL repeatedly will Auxiliary equipments connected to this unit
switch the AM tuning step between 9 kHz and can be activated individually. Set each AUX
10 kHz. The selected AM tuning step will ap- source to ON when using. About connecting
pear in the display. or using auxiliary equipments, refer to Using
the AUX source on page 89.
En 85
Section
14 Initial Settings
86 En
Section
Initial Settings 14
English
Switching the reverse mode Calibrating the RPMs
If you do not perform an operation within Follow the instructions below to measure the
about 30 seconds, screen indications start to RPM of your vehicle and records them. By
reverse, and then continue reversing every 10 doing this, the tachometer of this unit can
seconds. work properly.
! Tachometer of this unit cannot work if you
1 Use MULTI-CONTROL to select do not perform the RPM calibration.
Reverse mode. ! In some vehicles, the tachometer may not
Reverse mode appears in the display. work properly even if you performed the
RPM calibration.
2 Press MULTI-CONTROL to turn the re-
verse mode on. 1 Park your vehicle in a safe place and be
ON appears in the display. sure to apply the parking brake.
# To turn the reverse mode off, press
MULTI-CONTROL again. 2 Use MULTI-CONTROL to select
Calibration.
Note Calibration appears in the display.
You can also turn on or off reverse mode by press- 3 Keep RPMs of the engine at 4 000 rpm
ing BAND while this unit is turned off. For more and press MULTI-CONTROL.
details, see Reverse mode on page 9. To measure the RPM of your vehicle properly,
keep RPMs of the engine at 4 000 rpm for a
few seconds.
When the RPM calibration is completed,
Switching the Ever Scroll Completed is displayed.
When Ever Scroll is set to ON, CD text infor- # Some vehicles have a rev limiter that kicks in
mation scrolls continuously in the display. Set early (e.g., 3 000 rpm) while parking. In this case,
to OFF if you prefer the information to scroll perform RPM measurement at 2 000 rpm.
just once. # To switch between 4000 rpm and 2000 rpm,
push MULTI-CONTROL left or right.
1 Use MULTI-CONTROL to select
Ever-scroll.
Ever-scroll appears in the display.
Activating the BT Audio source
2 Press MULTI-CONTROL to turn the Ever You need to activate the BT Audio source in
Scroll on. order to use a Bluetooth audio player.
ON appears in the display.
# To turn the Ever Scroll off, press 1 Use MULTI-CONTROL to select
MULTI-CONTROL again. BT AUDIO.
BT AUDIO appears in the display.
En 87
Section
14 Initial Settings
88 En
Section
Other Functions 15
English
Turning the clock display AUX2 source:
on or off When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)
You can turn the clock display on or off.
% Use an IP-BUS-RCA Interconnector such
% Press CLOCK to turn the clock display as the CD-RB20/CD-RB10 (sold separetely)
on or off. to connect this unit to auxiliary equipment
Each press of CLOCK turns the clock display featuring RCA output.
on or off. For more details, refer to the IP-BUS-RCA Inter-
connector owner’s manual.
Note The allocation of this auxiliary equipment is
automatically set to AUX2.
Even when the sources are off, the clock display
# You can only make this type of connection if
appears on the display. Pressing CLOCK when
the auxiliary equipment has RCA outputs.
the sources and feature demo are off, turns the
clock display on or off.
En 89
Section
15 Other Functions
4 Push MULTI-CONTROL right to move You can change the entertainment display to
the cursor to the next character position. be displayed on all sources.
When the letter you want is displayed, push
MULTI-CONTROL right to move the cursor to 1 Entertainment display name
the next position and then select the next let- Shows name of the currently selected enter-
ter. Push MULTI-CONTROL left to move back- tainment display.
wards in the display.
2 Background display name
5 Move the cursor to the last position by Shows name of the currently selected back-
pushing MULTI-CONTROL right after enter- ground display.
ing the title.
When you push MULTI-CONTROL right one 3 Source icon
more time, the entered title is stored in mem- Shows which source has been selected.
ory. ! Jacket art of current folder is displayed
when playing an MP3/WMA/AAC/WAV
6 Press BAND to return to the playback disc.
display.
90 En
Section
Other Functions 15
English
2 Use MULTI-CONTROL to select 5 Press MULTI-CONTROL to determine
ENTERTAINMENT. the entertainment display and text color
Turn to change the menu option; press to se- setting.
lect. The choices you made on the color and the en-
tertainment display are stored in memory and
3 Turn MULTI-CONTROL to select a de- the display reverts.
sired entertainment display.
Turn MULTI-CONTROL clockwise or counter-
clockwise to switch between the displays in Setting the background display
the following order: Some entertainment displays allow you to
Standard (standard)—Visualizer1 (visualizer change the backgrounds. Try different back-
1)—Visualizer2 (visualizer 2)—Visualizer3 (vi- grounds and colors (if available) until you find
sualizer 3)—Visualizer4 (visualizer 4)— the desirable background display setting for
Visualizer5 (visualizer 5)—VisualizerRDM the selected entertainment display.
(random visualizer)—LevelMeter (level meter)
—Spectrum Analyzer (spectrum analyzer)— 1 Select an entertainment display whose
Vehicle Dynamics 1 (vehicle dynamics pro- background can be changed.
cessor 1)—Vehicle Dynamics 2 (vehicle dy- If the entertainment display you selected is
namics processor 2)—Vehicle Dynamics 3 available for the background setting, and
(vehicle dynamics processor 3)—Movie are displayed on the left and right side of
(movie screen)—Clock (entertainment clock) FRONT. Refer to Setting the entertainment dis-
—OFF (entertainment display off) play on the previous page.
# You can also switch between the entertain-
ment display by pressing ENTERTAINMENT on
2 Push MULTI-CONTROL right to switch
the remote control.
to the background display selection mode.
# When Standard is selected, source icon can
be turned on or off by pressing DISPLAY.
3 Turn MULTI-CONTROL to select a de-
sired background.
4 Push MULTI-CONTROL up or down to Turn MULTI-CONTROL clockwise or counter-
select a desired text color. clockwise to switch between the displays in
Each time MULTI-CONTROL is pushed up or the following order:
down, the text color changes. You can select BGV1 (background visual 1)—BGV2 (back-
the text color from among 11 colors. ground visual 2)—BGV3 (background visual 3)
# When Vehicle Dynamics 1,
—BGV4 (background visual 4)—BGV5 (back-
Vehicle Dynamics 2 or Vehicle Dynamics 3 is
ground visual 5)—BGP1 (background picture
selected, you can choose the color of gauge ap- 1)—BGP2 (background picture 2)—BGP3
pearance from among five color combinations.
(background picture 3)—BGP4 (background
# Texts are not displayed on Movie and OFF set- picture 4)—BGP5 (background picture 5)—
ting. BGP6 (background picture 6)—BGP7 (back-
ground picture 7)—BGP8 (background picture
8)—Slideshow (slideshow)—Texture1 (tex-
ture 1)—Texture2 (texture 2)—Texture3 (tex-
ture 3)—Texture4 (texture 4)—OFF
(background display off)
En 91
Section
15 Other Functions
# You cannot use ENTERTAINMENT on the re- 1 Press SOURCE and hold until the unit
mote control to switch between the background turns off.
display.
2 Press and hold EQ and LIST until the
4 When BGV1, BGV2 or Texture3 is se- unit goes into download mode.
lected, push MULTI-CONTROL up or down Front panel is opened automatically and then
to select a desired color for the back- Download and Insert disc is displayed.
ground. # If a disc is loaded in the unit, it is ejected auto-
Each time MULTI-CONTROL is pushed up or matically.
down, the background color changes. You can # When the front panel is open, does not go into
select the background color from among 11 download mode even if you press and hold EQ
colors (including rainbow mode). and LIST.
! When the rainbow mode is selected, the
background color continuously changes 3 Insert the disc containing the rewritten
through all the colors. data into the CD loading slot.
Download Ready appears in the display, and
5 Press MULTI-CONTROL to determine then data rewriting will start automatically.
the background display setting. Now loading is displayed during rewriting.
The choices you made on the color and the CD loading slot
background display are stored in memory and
the display reverts.
Rewriting the
entertainment displays and
the icons for telephone
functions 4 After Finished is displayed, press EJECT
to eject the disc.
You can rewrite the entertainment displays
Download mode is exited and unit turns off.
and the icons for telephone functions. Please
create or download the data using your Com-
puter, and record it on CD-R. For details, Notes
please visit the following site: ! Do not insert anything other than a CD into
http://www.pioneer.co.jp/car/pclink4/index- the CD loading slot.
e.html ! It can take several minutes to complete this
operation.
Important ! During download mode, buttons other than
EJECT are inactive.
Once the rewriting process has started, do not re- ! To cancel download mode, press EJECT.
move the front panel or turn the ignition off, until ! If an error message such as CD ERROR is dis-
it is completed. played, refer to Understanding error message
on rewriting the entertainment displays on
page 94.
92 En
Appendix
Additional Information
English
Understanding built-in CD pears, refer to the table below to see what the
problem is and the suggested method of cor-
player error messages recting the problem. After checking, try again.
When you contact your dealer or your nearest
Pioneer Service Center, be sure to record the Message Cause Action
error message.
Check MIC Microphone is Disconnect the mi-
type connected to mi- crophone.
Message Cause Action crophone input.
ERROR-11, 12, Dirty disc Clean disc. MIC ERROR Microphone is Plug the supplied
17, 30 not connected. microphone se-
curely into the
ERROR-11, 12, Scratched disc Replace disc. jack.
17, 30
Front Speaker The microphone ! Confirm that the
ERROR-10, 11, Electrical or me- Turn the ignition ERROR, Front cannot pick up speakers are con-
12, 15, 17, 30, chanical ON and OFF, or left Speaker the measuring nected correctly.
A0 switch to a differ- ERROR, Front tone of a speaker. ! Cancel muting
ent source, then right Speaker the front speaker
back to the CD ERROR, Rear units.
player. left Speaker ! Correct the input
ERROR-15 The inserted disc Replace disc. ERROR, Rear level setting of the
does not contain right Speaker power amp con-
any data ERROR, Sub- nected to the
woofer speakers.
ERROR-23 The CD format Replace disc.
ERROR, Sub- ! Set the micro-
cannot be played
woofer Lch phone correctly.
back
ERROR, Sub-
NO AUDIO The inserted disc Replace disc. woofer Rch
does not contain ERROR
any files that can
Noise ERROR The surrounding ! Stop your car in
be played back
noise level is too a place that is as
Track Skipped The inserted disc Replace disc. high. quiet as possible,
contains WMA and switch off the
files that are pro- engine, air condi-
tected by DRM tioner or heater.
PROTECT All the files on Replace disc. ! Set the micro-
the inserted disc phone correctly.
are secured by
DRM
En 93
Appendix
Additional Information
CD-R/CD-RW discs
! When CD-R/CD-RW discs are used, play-
back is possible only for discs which have
been finalized.
! It may not be possible to play back CD-R/
! Use only normal, round CDs. If you insert ir- CD-RW discs recorded on a music CD re-
regular, non-round, shaped CDs they may corder or a personal computer because of
jam in the CD player or not play properly. disc characteristics, scratches or dirt on
the disc, or dirt, condensation, etc., on the
lens of this unit.
94 En
Appendix
Additional Information
English
! Playback of discs recorded on a personal MP3, WMA, AAC and WAV files
computer may not be possible, depending
on the application settings and the environ- ! MP3 is short for MPEG Audio Layer 3 and
ment. Please record with the correct for- refers to an audio compression technology
mat. (For details, contact the manufacturer standard.
of the application.) ! WMA is short for Windows Media™ Audio
! Playback of CD-R/CD-RW discs may be- and refers to an audio compression tech-
come impossible in case of direct exposure nology that is developed by Microsoft Cor-
to sunlight, high temperatures, or the sto- poration. WMA data can be encoded by
rage conditions in the vehicle. using Windows Media Player version 7 or
! Titles and other text information recorded later.
on a CD-R/CD-RW disc may not be dis- ! AAC is short for Advanced Audio Coding
played by this unit (in the case of audio and refers to an audio compression tech-
data (CD-DA)). nology standard.
! Read the precautions with CD-R/CD-RW ! WAV is short for waveform. It is a standard
discs before using them. audio file format for Windows®.
! This unit may not operate correctly depend-
ing on the application used to encode
WMA files.
! Depending on the version of Windows
Dual Discs Media Player used to encode WMA files,
! Dual Discs are two-sided discs that have a album names and other text information
recordable CD for audio on one side and a may not be correctly displayed.
recordable DVD for video on the other. ! There may be a slight delay when starting
! Since the CD side of Dual Discs is not phy- playback of WMA/AAC files encoded with
sically compatible with the general CD image data.
standard, it may not be possible to play the ! This unit allows playback of MP3/WMA/
CD side with this unit. AAC/WAV files on CD-ROM, CD-R and CD-
! Frequent loading and ejecting of a Dual RW discs. Disc recordings compatible with
Disc may result in scratches on the disc. level 1 and level 2 of ISO9660 and with the
Serious scratches can lead to playback pro- Romeo and Joliet file system can be played
blems on this unit. In some cases, a Dual back.
Disc may become stuck in the disc loading ! It is possible to play back multi-session
slot and will not eject. To prevent this, we compatible recorded discs.
recommend you refrain from using Dual ! MP3/WMA/AAC/WAV files are not compati-
Disc with this unit. ble with packet write data transfer.
! Please refer to the information from the ! The maximum number of characters which
disc manufacturer for more detailed infor- can be displayed for a file name, including
mation about Dual Discs. the extension (.mp3, .wma, .m4a or .wav), is
64, from the first character.
! The maximum number of characters which
can be displayed for a folder name is 64.
! In case of files recorded according to the
Romeo file system, only the first 64 charac-
ters can be displayed.
En 95
Appendix
Additional Information
! When playing discs with MP3/WMA/AAC/ ! The emphasis function is valid only when
WAV files and audio data (CD-DA) such as MP3 files of 32, 44.1 and 48 kHz frequen-
CD-EXTRA and MIXED-MODE CDs, both cies are played back. (16, 22.05, 24, 32,
types can be played only by switching 44.1, 48 kHz sampling frequencies can be
mode between MP3/WMA/AAC/WAV and played back.)
CD-DA. ! There is no m3u playlist compatibility.
! The folder selection sequence for playback ! There is no compatibility with the MP3i
and other operations becomes the writing (MP3 interactive) or mp3 PRO formats.
sequence used by the writing software. For ! The sound quality of MP3 files generally be-
this reason, the expected sequence at the comes better with an increased bit rate.
time of playback may not coincide with the This unit can play recordings with bit rates
actual playback sequence. However, there from 8 kbps to 320 kbps, but in order to be
also is some writing software which per- able to enjoy sound of a certain quality, we
mits setting of the playback order. recommend using only discs recorded with
! Some audio CDs contain tracks that merge a bit rate of at least 128 kbps.
into one another without a pause. When
these discs are converted to MP3/WMA/
AAC/WAV files and burned to a CD-R/CD- WMA additional information
RW/CD-ROM, the files will be played back ! This unit plays back WMA files encoded by
on this player with a short pause between Windows Media Player version 7, 7.1, 8, 9
each one, regardless of the length of the and 10.
pause between tracks on the original audio ! You can only play back WMA files in the fre-
CD. quencies 32, 44.1 and 48 kHz.
! The sound quality of WMA files generally
Important becomes better with an increased bit rate.
! When naming an MP3/WMA/AAC/WAV file,
This unit can play recordings with bit rates
add the corresponding filename extension
from 48 kbps to 320 kbps (CBR) or from 48
(.mp3, .wma, .m4a or .wav).
kbps to 384 kbps (VBR), but in order to be
! This unit plays back files with the filename ex-
able to enjoy sound of a certain quality, we
tension (.mp3, .wma, m4a or .wav) as an MP3/
recommend using discs recorded with a
WMA/AAC/WAV file. To prevent noise and
higher bit rate.
malfunctions, do not use these extensions for
! This unit doesn’t support the following for-
files other than MP3/WMA/AAC/WAV files.
mats.
— Windows Media Audio 9 Professional
(5.1ch)
— Windows Media Audio 9 Lossless
MP3 additional information — Windows Media Audio 9 Voice
! Files are compatible with the ID3 Tag Ver.
1.0, 1.1, 2.2, 2.3 and 2.4 formats for display
of album (disc title), track (track title), artist AAC additional information
(track artist) and comments. Ver. 2.x of ID3
Tag is given priority when both Ver. 1.x and ! This unit plays back AAC files encoded by
Ver. 2.x exist. iTunes® version 4.8 and earlier.
96 En
Appendix
Additional Information
English
! This unit plays back AAC files in the sam-
pling frequencies 11.025, 16, 22.05, 24, 32,
44.1 and 48 kHz.
! The sound quality of AAC files generally be-
comes better with an increased transmis-
sion rate. This unit can play recordings
with transmission rates from 16 kbps to
320 kbps, but in order to be able to enjoy
sound of a certain quality, we recommend
using discs recorded with a higher trans-
mission rate.
! This unit doesn’t support the following for-
mats.
— Apple Lossless
En 97
Appendix
Additional Information
98 En
Appendix
Additional Information
English
Terms HFP
HFP is short for Hands Free Profile. This profile
A2DP is used for hands-free phoning with the de-
A2DP is short for Advanced Audio Distribution vices featuring Bluetooth wireless technology.
Profile. This profile allows the high quality
audio data of either stereo or monaural to be HSP
transmitted via Bluetooth wireless technology. HSP is short for Head Set Profile. This profile
is used for connecting headset and communi-
AAC cation terminal via Bluetooth wireless technol-
AAC is short for Advanced Audio Coding and ogy.
refers to an audio compression technology
standard used with MPEG 2 and MPEG 4. ID3 tag
This is a method of embedding track-related
AVRCP information in an MP3 file. This embedded in-
AVRCP is short for Audio/Video Remote Con- formation can include the track title, the ar-
trol Profile. This profile enables interoperability tist’s name, the album title, the music genre,
between audio and video features of the Blue- the year of production, comments and other
tooth device connected via Bluetooth wireless data. The contents can be freely edited using
technology. software with ID3 Tag editing functions.
Although the tags are restricted as to the num-
Bit rate ber of characters, the information can be
This expresses data volume per second, or bps viewed when the track is played back.
(bits per second) units. The higher the rate,
the more information is available to reproduce ISO9660 format
the sound. Using the same encoding method This is the international standard for the for-
(such as MP3), the higher the rate, the better mat logic of CD-ROM folders and files. For the
the sound. ISO9660 format, there are regulations for the
following two levels.
Bluetooth Level 1:
Bluetooth is a short-range wireless radio con- The file name is in 8.3 format (the name con-
nectivity technology that is developed as a sists of up to 8 characters, half-byte English
cable replacement for mobile phones, hand- capital letters and half-byte numerals and the
held PCs and other devices. Bluetooth oper- “_” sign, with a file-extension of three charac-
ates in 2.4 GHz frequency range and transmits ters).
voice and data at speeds up to 1 megabit per Level 2:
second. Bluetooth was launched by a special The file name can have up to 31 characters (in-
interest group (SIG) that comprises of Ericsson cluding the separation mark “.” and a file ex-
Inc., Intel Corp., Nokia Corp., Toshiba and IBM tension). Each folder contains less than 8
in 1998, and it is currently developed by nearly hierarchies.
2 000 companies worldwide. Extended formats
Joliet:
GAP File names can have up to 64 characters.
GAP is short for Generic Access Profile. This is Romeo:
a basic profile of Bluetooth wireless technol- File names can have up to 128 characters.
ogy.
En 99
Appendix
Additional Information
Linear PCM (LPCM)/Pulse code data, schedule data and so on between de-
modulation vices featuring Bluetooth wireless technology.
This stands for linear pulse code modulation,
which is the signal recording system used for Packet write
music CDs and DVDs. This is a general term for a method of writing
on CD-R, etc., at the time required for a file,
m3u just as is done with files on floppy or hard
Playlists created using the “WINAMP” soft- discs.
ware have a playlist file extension (.m3u).
SDP
MP3 SDP is short for Service Discovery Protocol.
MP3 is short for MPEG Audio Layer 3. It is an This protocol is to search for available services
audio compression standard set by a working and service characteristics on other devices
group (MPEG) of the ISO (International Stan- featuring Bluetooth wireless technology.
dards Organization). MP3 is able to compress
audio data to about 1/10th the level of a con- VBR
ventional disc. VBR is short for variable bit rate. Generally
speaking CBR (constant bit rate) is more
MS ADPCM widely used. But by flexibly adjusting the bit
This stands for Microsoft adaptive differential rate according to the needs of audio compres-
pulse code modulation, which is the signal re- sion, it is possible to achieve compression-
cording system used for the multimedia soft- priority sound quality.
ware of Microsoft Corporation.
WAV
Multi-session WAV is short for waveform. It is a standard
Multi-session is a recording method that al- audio file format for Windows®.
lows additional data to be recorded later.
When recording data on a CD-ROM, CD-R or WMA
CD-RW, etc., all data from beginning to end is WMA is short for Windows Media™ Audio
treated as a single unit or session. Multi-ses- and refers to an audio compression technol-
sion is a method of recording more than 2 ses- ogy that is developed by Microsoft Corpora-
sions on one disc. tion. WMA data can be encoded by using
Windows Media Player version 7 or later.
Number of quantization bits Windows Media and the Windows logo are tra-
The number of quantization bits is one factor demarks or registered trademarks of Microsoft
in the overall sound quality; the higher the Corporation in the United States and/or other
“bit-depth”, the better the sound quality. How- countries.
ever, increasing the bit-depth also increases
the amount of data and therefore storage
space required.
OPP
OPP is short for Object Push Profile. This pro-
file is used for transferring the phonebook
100 En
Appendix
Additional Information
English
Specifications CD player
System .......................................... Compact disc audio system
General Usable discs .............................. Compact disc
Rated power source ............... 14.4 V DC Signal format:
(allowable voltage range: Sampling frequency ..... 44.1 kHz
12.0 V to 14.4 V DC) Number of quantization bits
Grounding system ................... Negative type ........................................... 16; linear
Max. current consumption Frequency characteristics ... 5 Hz to 20 000 Hz (±1 dB)
..................................................... 10.0 A Signal-to-noise ratio ............... 100 dB (1 kHz) (IEC-A net-
Dimensions (W × H × D): work)
DIN Dynamic range ......................... 95 dB (1 kHz)
Chassis ..................... 178 × 50 × 161 mm Number of channels .............. 2 (stereo)
Nose ........................... 188 × 58 × 23 mm MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
D WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10 (2ch
Chassis ..................... 178 × 50 × 166 mm audio)
Nose ........................... 170 × 45 × 18 mm (Windows Media Player)
Weight .......................................... 1.7 kg AAC decoding format ............ MPEG-4 AAC (iTunes® en-
coded only)
Audio/DSP WAV signal format .................. Linear PCM & MS ADPCM
Maximum power output ....... 50 W × 4
Continuous power output ... 22 W × 4 (50 Hz to 15 000 FM tuner
Hz, 5% THD, 4 W load, both Frequency range ...................... 87.5 MHz to 108.0 MHz
channels driven) Usable sensitivity ..................... 8 dBf (0.7 µV/75 W, mono,
Load impedance ...................... 4 W (4 W to 8 W allowable) S/N: 30 dB)
Preout max output level/output impedance 50 dB quieting sensitivity ..... 10 dBf (0.9 µV/75 W, mono)
..................................................... 5 V/100W Signal-to-noise ratio ............... 75 dB (IEC-A network)
Loudness contour ................... +10 dB (100 Hz), +6.5 dB Distortion ..................................... 0.3 % (at 65 dBf, 1 kHz,
(10 kHz) (volume: –30 dB) stereo)
Equalizer (16-Band Graphic Equalizer): 0.1 % (at 65 dBf, 1 kHz,
Frequency .......................... 20/31.5/50/80/125/200/315/ mono)
500/800/1.25k/2k/3.15k/5k/ Frequency response ............... 30 Hz to 15 000 Hz (±3 dB)
8k/12.5k/20k Hz Stereo separation .................... 45 dB (at 65 dBf, 1 kHz)
Equalization range ........ ±12 dB
Auto equalizer: AM tuner
(Front & rear & subwoofer 16 band graphic) Frequency range ...................... 531 kHz to 1 602 kHz (9 kHz)
Frequency .......................... 20/31.5/50/80/125/200/315/ 530 kHz to 1 640 kHz (10
500/800/1.25k/2k/3.15k/5k/ kHz)
8k/12.5k/20k Hz Usable sensitivity ..................... 18 µV (S/N: 20 dB)
Equalization range ........ +6 dB to –12 dB Signal-to-noise ratio ............... 65 dB (IEC-A network)
HPF (Front/rear):
Frequency .......................... 50/63/80/100/125/160/200
Hz Bluetooth
Slope .................................... 0 (Pass)/–6/–12 dB/oct Version .......................................... Bluetooth 1.2 certified
Gain ...................................... 0 dB to –24 dB/Mute Output power ............................ +4 dBm Max.
Subwoofer (stereo/mono): (Power class 2)
Frequency .......................... 50/63/80/100/125/160/200
Hz
Slope .................................... –6/–12/–18 dB/oct
Gain ...................................... +6 dB to –24 dB/Mute
Phase .................................. Normal/Reverse
En 101
Appendix
Additional Information
Note
Specifications and the design are subject to pos-
sible modifications without notice due to im-
provements.
102 En
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
TEL: 1-877-283-5901
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL: 55-9178-4270
先鋒股份有限公司
總公司 : 台北市中山北路二段44號13樓
電話 : (02) 2521-3588
先鋒電子(香港)有限公司
香港九龍尖沙咀海港城世界商業中心 Published by Pioneer Corporation.
9樓901-6室 Copyright © 2006 by Pioneer Corporation.
電話 : (0852) 2848-6488 All rights reserved.
Printed in Thailand
<KMMZX> <06B00000> <CRB2179-A/N> ES