Академический Документы
Профессиональный Документы
Культура Документы
Complementary Silicon
Plastic Power Transistors
These devices are designed for use in general−purpose amplifier and
switching applications. www.onsemi.com
Features
15 AMPERE
• High DC Current Gain COMPLEMENTARY SILICON
• High Current Gain − Bandwidth Product POWER TRANSISTORS
• TO−220 Compact Package 60−80 VOLTS, 75 WATTS
• These Devices are Pb−Free and are RoHS Compliant*
PNP NPN
MAXIMUM RATINGS (Note 1) COLLECTOR 2, 4 COLLECTOR 2, 4
Rating Symbol Value Unit
Collector−Emitter Voltage VCEO Vdc
2N6487, 2N6490 60 1 1
2N6488, 2N6491 80 BASE BASE
ORDERING INFORMATION
*For additional information on our Pb−Free strategy and soldering details, please
See detailed ordering, marking, and shipping information in
download the ON Semiconductor Soldering and Mounting Techniques
the package dimensions section on page 5 of this data sheet.
Reference Manual, SOLDERRM/D.
ON CHARACTERISTICS
DC Current Gain hFE −
(IC = 5.0 Adc, VCE = 4.0 Vdc) 20 150
(IC = 15 Adc, VCE = 4.0 Vdc) 5.0 −
Collector−Emitter Saturation Voltage VCE(sat) Vdc
(IC = 5.0 Adc, IB = 0.5 Adc) − 1.3
(IC = 15 Adc, IB = 5.0 Adc) − 3.5
Base−Emitter On Voltage VBE(on) Vdc
(IC = 5.0 Adc, VCE = 4.0 Vdc) − 1.3
(IC = 15 Adc, VCE = 4.0 Vdc) − 3.5
DYNAMIC CHARACTERISTICS
Current−Gain − Bandwidth Product (Note 4) fT MHz
(IC = 1.0 Adc, VCE = 4.0 Vdc, ftest = 1.0 MHz) 5.0 −
http://onsemi.com
2
2N6487, 2N6488 (NPN), 2N6490, 2N6491 (PNP)
TA TC
4.0 80
2.0 40
TA
1.0 20
0 0
0 20 40 60 80 100 120 140 160
TC, CASE TEMPERATURE (°C)
VCC
+ 30 V 1000
25 ms RC 500
+ 10 V tr
SCOPE
RB 200
0
t, TIME (ns)
- 10 V 100
51 D1
tr, tf v 10 ns 50 NPN td @ VBE(off) [ 5.0 V
DUTY CYCLE = 1.0% -4V PNP
RB AND RC VARIED TO OBTAIN DESIRED CURRENT LEVELS. TC = 25°C
FOR PNP, REVERSE ALL POLARITIES. 20
VCC = 30 V
IC/IB = 10
D1 MUST BE FAST RECOVERY TYPE, e.g.: 10
1N5825 USED ABOVE IB [ 100 mA 0.2 0.5 1.0 2.0 5.0 10 20
MSD6100 USED BELOW IB [ 100 mA IC, COLLECTOR CURRENT (AMP)
1.0
0.7
r(t), TRANSIENT THERMAL RESISTANCE
D = 0.5
0.5
0.3
0.2
0.2
(NORMALIZED)
0.1
0.1 ZqJC (t) = r(t) RqJC P(pk)
0.07 0.05
RqJC = 1.67°C/W MAX
0.05 D CURVES APPLY FOR POWER
0.02
PULSE TRAIN SHOWN t1
0.03
READ TIME AT t1 t2
0.02 0.01 TJ(pk) - TC = P(pk) ZqJC(t)
SINGLE PULSE DUTY CYCLE, D = t1/t2
0.01
0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1.0 k
t, TIME (ms)
Figure 4. Thermal Response
http://onsemi.com
3
2N6487, 2N6488 (NPN), 2N6490, 2N6491 (PNP)
5000 1000
700
ts
Cob
1000 C, CAPACITANCE (pF)
300 Cib
t, TIME (ns)
500 tf Cob
200
NPN
200 PNP VCC = 30 V
100 NPN
IC/IB = 10
100 IB1 = IB2 PNP
70
TJ = 25°C TJ = 25°C
50 50
0.2 0.5 1.0 2.0 5.0 10 20 0.5 1.0 2.0 5.0 10 20 50
IC, COLLECTOR CURRENT (AMP) VR, REVERSE VOLTAGE (VOLTS)
NPN PNP
2N6487, 2N6488 2N6490, 2N6491
500 500
TJ = 150°C
200 25°C 200 TJ = 150°C
hFE, DC CURRENT GAIN
25°C
100 100
-55°C -55°C
50 50
20 20
VCE = 2.0 V
10 10 VCE = 2.0 V
5.0 5.0
0.2 0.5 1.0 2.0 5.0 10 20 0.2 0.5 1.0 2.0 5.0 10 20
IC, COLLECTOR CURRENT (AMP) IC, COLLECTOR CURRENT (AMP)
Figure 8. DC Current Gain
http://onsemi.com
4
2N6487, 2N6488 (NPN), 2N6490, 2N6491 (PNP)
1.6 1.6
1.4 1.4
1.2 1.2
1.0 IC = 1.0 A 1.0 IC = 1.0 A 4.0 A 8.0 A
0.8 0.8
4.0 A 8.0 A
0.6 0.6
0.4 0.4
0.2 0.2
0 0
5.0 10 20 50 100 200 500 1000 2000 5000 5.0 10 20 50 100 200 500 1000 2000 5000
IB, BASE CURRENT (mA) IB, BASE CURRENT (mA)
Figure 9. Collector Saturation Region
2.8 2.8
V, VOLTAGE (VOLTS)
2.0 2.0
1.6 1.6
1.2 1.2
VBE(sat) = IC/IB = 10 VBE(sat) @ IC/IB = 10
0.8 0.8
VBE @ VCE = 2.0 V VBE @ VCE = 2.0 V
0.4 0.4
VCE(sat) @ IC/IB = 10 VCE(sat) @ IC/IB = 10
0 0
0.2 0.5 1.0 2.0 5.0 10 20 0.2 0.5 1.0 2.0 5.0 10 20
IC, COLLECTOR CURRENT (AMP) IC, COLLECTOR CURRENT (AMP)
ORDERING INFORMATION
Device Device Marking Package Shipping
2N6487G 2N6487 TO−220 50 Units / Rail
(Pb−Free)
http://onsemi.com
5
2N6487, 2N6488 (NPN), 2N6490, 2N6491 (PNP)
PACKAGE DIMENSIONS
TO−220
CASE 221A−09
ISSUE AH
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
SEATING
−T− PLANE 2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
B F C BODY AND LEAD IRREGULARITIES ARE
T ALLOWED.
S
INCHES MILLIMETERS
4 DIM MIN MAX MIN MAX
A 0.570 0.620 14.48 15.75
Q A B 0.380 0.415 9.66 10.53
C 0.160 0.190 4.07 4.83
1 2 3 U D 0.025 0.038 0.64 0.96
F 0.142 0.161 3.61 4.09
H G 0.095 0.105 2.42 2.66
H 0.110 0.161 2.80 4.10
K J 0.014 0.024 0.36 0.61
Z K 0.500 0.562 12.70 14.27
L 0.045 0.060 1.15 1.52
N 0.190 0.210 4.83 5.33
L R Q 0.100 0.120 2.54 3.04
R 0.080 0.110 2.04 2.79
V J S 0.045 0.055 1.15 1.39
T 0.235 0.255 5.97 6.47
G U 0.000 0.050 0.00 1.27
V 0.045 --- 1.15 ---
D Z --- 0.080 --- 2.04
N
STYLE 1:
PIN 1. BASE
2. COLLECTOR
3. EMITTER
4. COLLECTOR
ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
http://onsemi.com 2N6487/D
6