Академический Документы
Профессиональный Документы
Культура Документы
Commands Application
Note
Version:V1.0.3
Date:2015-08-24
Copyright
Copyright ©2015 Fibocom Wireless Inc . All rights reserved.
Without the prior written permission of the copyright holder, any company or individual is prohibited to
excerpt, copy any part of or the entire document, or transmit the document in any form.
Attention
The document is subject to update from time to time owing to the product version upgrade or other
reasons. Unless otherwise specified, the document only serves as the user guide. All the statements,
information and suggestions contained in the document do not constitute any explicit or implicit
guarantee.
Trademark
The trademark is registered and owned by Fibocom Wireless Inc.
Versions
Version Date Remarks
2 G610-A20-00
<CR><LF>+SIMRESET<CR><LF>
To customer’s device, means it needs customer’s device to reset the SIM card. The customer’s device
should send the ATR data received from SIM card to the module in 5 seconds. Generally, module sends
the data to the customer’s device in the following circumstances:
<CR>>LF>+SIMDATA:”data”<CR><LF>
To the customer’s device, the customer’s device should send these data to the SIM card, and send the
response data received from SIM card to the module in 5 seconds.
The data send from module to SIM card is transformed (transform binary data to ASC II characters), the
customer’s device transform it to actual data and then send it to SIM card. For example, if the module
need to send 0xA0, 0xA4, 0x00, 0x00, 0x02, 0x7F, 0x20 to SIM card, the actual data would be:
<CR><LF>+SIMDATA: "A0A40000027F20"<CR><LF>.
AT+SIMDATA=”data”<CR>
The SIM card data send from customer’s device to module must also following the format in chapter 3,
transform it to ASC II characters. For example, if you need to send 0x4A, 0x90, 0x00 to the module, the
actual command should be:
AT+SIMDATA=”4A9000”<CR>
Example:
AT+GTSET=”SIMPIPE”,0
OK
AT+GTSET=”SIMPIPE”,1
OK