Академический Документы
Профессиональный Документы
Культура Документы
2008/06/03
Before You Begin
This product can be set up using a web browser, such as Internet Explorer.
If you purchased this product to make a VoIP call, you must have either an Ethernet-based
Cable or a DSL modem with an active connection to the Internet.
• VoIP Router TA
If you purchas ed this product to make aVoIP call, you mus t have either an Ethernet-based
Cable or a DSLmodem with an tive ac connection to the Internet.
• Et hern et cab le
• Ph one cable
• Pow er cord
• Ethernet cable
• Phone cable
1
Connecting the VoIP Router TA to Your Network
A. Connect the power adaptor to this jack. The Power LED will light to indicate proper
operation.
B. Connect the Ethernet cable to the WAN Port when connecting to the Internet assess device
such as Cable or a DSL modem. The WAN LED will indicate the proper connection.
C. Connect the Ethernet cable to the LAN Port when connecting to a PC or an office/home
network. The LAN LED will indicate the proper connection.
D. Connect the phone cable to the available FXS Port when connecting to an analog telephone.
2
LED Indicator Description
Item Name Color Status Description
On System Power on
1 Power Green
Off System Power off
On System crash
2 Run Green Off System crash
Flash System running
On SIP Registration Ok
3 SIP Reg Green
Off SIP Registration Fail
On 1st Channel is in use
4 FXS1 Green Off 1st Channel is not in use
Flash 1st Channel is ringing
On 2nd Channel is in use
5 FXS2 Green Off 2nd Channel is not in use
Flash 2nd Channel is ringing
On LAN port is connected
6 LAN Green Off LAN port is not connected
Flash Packet transmit in LAN port
On WAN port is connected
7 WAN Green Off WAN port is not connected
Flash Packet transmit in WAN port
3
When you have connected all the line to the VoIP router TA, it looks similar to this:
Web Login
The configuration menu of VoIP TA Router can be accessed using a convenient and
user-friendly interface of web browser.
4
Type “admin” for the
username and password
Click OK
Select PPPoE as network connection type if your ISP uses PPPoE. Most DSL users use PPPoE.
5
Select PPPoE as connection type
6
SIP Settings
Select SIP Settings from the VoIP of main menu. The following fields with “ ” are
required. Then click Apply.
7
Outbound Proxy Port Port number of Outbound Proxy Server.
Select Restart from the System of main menu and then click Restart to reboot.
Click Restart