Академический Документы
Профессиональный Документы
Культура Документы
Class 150 lb
Pipe Flange Data Raised Face Drilling Data Weight
Pipe Size
Nominal
Flange Diameter
Outside Overall Face Bolt Hole
Thickness of Circle of
Diameter Diameter Diameter Number of Diameter
min
Holes
Holes kg/piece
in in in in in in
mm mm mm mm mm mm
1 0.840 3.500 0.19 1.380 0.620 2.380
/2 21.30 88.90 4.76 35.10
4
15.70 60.45
0.42
3 1.050 3.880 0.19 1.690 0.620 2.750
/4 26.70 98.60 4.76 42.90 4 15.70 69.85 0.61
1 1.315 4.250 0.19 2.000 0.620 3.120
33.40 108.0 4.76 50.80 4 15.70 79.25 0.86
1 1.660 4.620 0.25 2.500 0.620 3.500
1 /4 42.20 117.3 6.35 63.50
4
15.70 88.90
1.17
1.900 5.000 0.25 2.880 0.620 3.880
11/2 48.30 127.0 6.35 73.15 4 15.70 98.60 1.53
2 2.375 6.000 0.31 3.620 0.750 4.750
60.30 152.4 7.93 91.90 4 19.10 120.7 2.42
2.875 7.000 0.31 4.120 0.750 5.500
21/2 73.00 177.8 7.93 104.6
4
19.10 139.7
3.94
3 3.500 7.500 0.38 5.000 0.750 6.000
88.90 190.5 9.52 127.0 4 19.10 152.4 4.93
4.000 8.500 0.38 5.500 0.750 7.000
31/2 101.6 215.9 9.52 139.7 8 19.10 177.8 6.17
4 4.500 9.000 0.38 6.190 0.750 7.500
9.52 8 7.00
114.3 228.6 157.2 19.10 190.5
5 5.563 10.00 0.5 7.310 8 0.880 8.500 8.63
141.3 254.0 12.7 185.7 22.40 215.9
6.625 11.00 0.5 8.500 0.880 9.500
6 168.3 279.4 12.7 215.9
8
22.40 241.3
11.3
8.625 13.50 0.5 10.62 0.880 11.75
8 219.1 342.9 12.7 269.7
8
22.40 298.5
19.6
10.75 16.00 0.62 12.75 1.000 14.25
10 273.0 406.4 15.87 323.9
12
25.40 362.0
28.8
12.75 19.00 0.75 15.00 1.000 17.00
12 323.8 482.6 19.05 381.0
12
25.40 431.8
43.2
14.00 21.00 0.0.88 16.25 1.120 18.75
14 355.6 533.4 22.22 412.8
12
28.40 476.3
58.1
16.00 23.50 0.88 18.50 1.120 21.25
16 406.4 596.9 22.22 469.9
16
28.40 539.8
76.0
18.00 25.00 1.00 21.00 1.250 22.75
18 457.2 635.0 25.00 533.4
16
31.75 577.9
93.7
20.00 27.50 1.13 23.00 1.250 25.00
20 508.0 698.5 34.92 584.2
20
31.75 635.0
122
24.00 32.00 1.25 27.25 1.380 29.50
24 609.6 812.8 69.85 692.2
20
35.10 749.3
185
Notes
- Weights are based on manufacturer’s data and are approximate.
- Flat face flanges may be provided at full thickness, C, or with raised face removed (the latter is nonstandard).
- For ring joint facings see page 8-6.
- For tolerances see page 8-4.
Aalco Tel. 01932 250100 Fax: 01932 250101 E-mail: Marketing@amari-metals.com 8-23
Flanges
BS 10 : 1962
British Standard BS 10 : 1962 - Specification for Flanges and Bolting for Pipes, Valves,
and Fittings. This covers plain, boss, integrally cast or forged, and welding neck type
flanges, in ten tables. Although BS 10 is obsolescent, it remains in use for the dimensions
of light duty, economy stainless steel flanges in applications where corrosion resistance
and/or hygiene, rather than high pressures and temperatures, are the primary
considerations. The following tables detail the applicable standard dimensions from
Tables D, E, F and H of BS 10.
21/2 61/2 5
/16 5 4 5
/8 61/2 13
/32 5 4 5
/8
3 71/4 3/8 53/4 4 5/8 71/4 7/16 53/4 4 5/8
4 1 3 7 4 5 1 1 7 8 5
8 /2 /8 /8 8 /2 /2 /8
5 10 1/2 81/4 8 5/8 10 9/16 81/4 8 5/8
1
6 11 /2 91/4 8 5
/8 11 11
/16 91/4 8 3
/4
7 12 1/2 101/4 8 5/8 12 3/4 101/4 8 3/4
9 1 5 3 8 5 1 3 3 12 3
14 /2 /8 12 /4 /8 14 /2 1 /16 12 /4 /4
10 16 5/8 14 8 3/4 16 7/8 14 12 3/4
12 18 3 16 12 3 18 1 16 12 7
/4 /4 /8
13 191/4 3/4 171/4 12 3/4 191/4 1 171/4 12 7/8
15 213/4 7
/8 191/2 12 7
/8 213/4 11/4 191/2 12 7
/8
16 223/4 7/8 201/2 12 7/8 223/4 11/4 201/2 12 7/8
17 24 1 213/4 12 7
/8 24 13/8 213/4 12 7
/8
18 251/4 1 23 12 7/8 251/4 13/8 23 16 7/8
Aalco Tel. 01932 250100 Fax: 01932 250101 E-mail: Marketing@amari-metals.com 8-71