Академический Документы
Профессиональный Документы
Культура Документы
-BOQ-
-BOQ-
1 out of 62
Tulkarem Hospital
-BOQ-
* The contractor shall, when pricing the rates of this bill, take
into consideration to include and allow for the costs or
expenses of all requirements stipulated herein below or in
the preambles, drawings and the specification of the
tender.
* The contractor should visit the site to verify the amount of work
and consider all other works for the proper construction of the
new floor.
* The disposal& demolished materials shall be carried out from
the construction zones through special arrangements to external
hospital yards to avoid disturbances/ noises or dust spreading
down the floors or neighboring areas. the contractor is
responsible for the disposal of all demolished and removed
materials from the site to a dump site approved by the
municipality.
* The contractor should coordinate with the client for any possible
material or elements that need to be preserved and handed over
to the client stores.
* The preserved elements such as steel doors& widows, steel
grills, steel hand rails, steel steps and metal protections for fans
shafts& service openings shall be re installed for the new
construction as directed by the engineer. while the other
materials should be handed over to the client stores.
2 out of 62
Tulkarem Hospital
-BOQ-
1.2 Demolishing the existing concrete roof slab for the machinery M2 250
room located on the existing roof. The unit price shall include
dismantling and removal all the utilities and finishing layers
above the slab including the sloped light weight concrete, water
proofing layers. All as directed by the Engineer.
1.4 Demolish and removal of concrete roof slabs for existing M2 100
elevators shafts (roof& floor) including the protection and
preservation of all existing finishing works, steel doors, steel
steps& handrails, grills--etc, and all other electrical& mechanical
utilities, fittings and equipments, machines. …etc. the work also
includes cuttings/ making new openings for elevators doors
through the existing concrete walls to match the new proposed
locations of the elevators and perform concrete filling/
patching/adjustment of the existing doors openings at the roof.
the voids for the elevators shall be protected by rigid formwork
or scaffolding through out the construction stage.
1.5 Demolishing and removal the finishing layers on top of the M2 300
existing roof slabs including the sloped light weight concrete,
and machine foundations. All as directed by the Engineer.
(provisional)
3 out of 62
Tulkarem Hospital
-BOQ-
1.7 Careful dismantle, demolish and removal of the existing sky light L.S 1
structure (between grids10-13&H-J) including all elements that
blocks the construction of new design layout. The price includes
the re-installtion of the same dismantled sky light and the steel
structure at the new roof level. Hence all parts and elements of
the sky light such as transparent sheets, metal sections&
profiles, plates, anchors, sheets, flashing.......etc should be
carefully dismantled and reserved in good condition. the void for
the sky light shall be protected by rigid and safe formwork or
scaffolding throughout the construction stage. The price shall
include also cuttings in concrete walls for new windows
openings and treming the concrete wall to fit the details as
shown in drawings.
1.8 Dismantle and demolish parts of the existing stone roof parapet, M2 100
circular parts and parts of the chimney walls, including the
preservation of stone courses.
1.9 Careful removal of existing coping for the stone parapet and MR 245
preservation for use in the construction of new stone parapet.
All as directed by the Engineer.
4 out of 62
Tulkarem Hospital
-BOQ-
2 Concrete Works
The contractor shall, when pricing the rates of this bill, take into
consideration including and allow for the costs or expenses of all
requirements stipulated in the preambles, drawings and
technical specification of the tender.
All concrete works includes the supply of ready mix concrete,
placing& casting, formwork & supports, reproping, shuttering,
vibration, curing, testing and whatever needed for the
completion of the works all in accordance to the standards,
codes, specifications and as details shown in drawings.
2.7 Supply and cast reinforced concrete B300 for walls of various M3 145
thickness, dimensions and different locations.
2.8 Supply and cast concrete B300 behind stone walls for backing M3 200
the stone work and for windows and door lintels and where
needed; all in accordance with the engineer instructions.
2.9 Deformed high yield steel bar reinforcement of various TON 130
diameters, characteristic strength FY=420N/mm2 for concrete
reinforcement, as shown on drawings and according to
specifications.
5 out of 62
Tulkarem Hospital
-BOQ-
3 Stone Works
The contractor shall, when pricing the rates of this bill, take into
consideration including and allow for the costs and expenses of
all requirements stipulated in the preambles, drawings and
technical specification of the contract. The price includes
scaffolding, formworks, supports, cutting, trimming, chamfering,
galvanized anchors& pins, angles as specified and flush
pointing works composed of white cement and sand (1/2) with
approve additive for better workability, tightness and water
proofing. The stone finishing and dressing for the new stone
works shall be similar to that rendered at the lower floors of the
existing hospital building. The unite rate shall also include cost
of all required stone pieces, (such as windows and doors
jambs, sills, lintels, corners, key stones, any other special stone
pieces etc..); all as per the stone works rendered in the lower
floors of the existing hospital and to the engineer instructions.
Accordingly, no separate cost allowance for the stone pieces.
The unit rate shall also include the cost of pointing the stone
work.
3.1 Supply and install 5 cm thick 25 cm wide Taltish stone courses M2 950
from first quality Jama'en as shown on drawings. The unit rate
shall include cost of 10cm hollow concrete blocks and anchors
for the stone walls as per drawings.
3.2 Ditto, but 4 cm thick stone cladding. The rate includes cost of M2 40
B200 concrete backing, anchors and 6 mm steel mesh. The rate
includes all anchoring details as shown on drawings.
3.4 Supply and install 8 cm thick stone coping , 36 cm wide a stone MR 100
roof parapet copping made from Jama'en stone . The price
includes stone pointing.
3.5 Re-install stone copping which was dismanteled and preserved MR 150
from the existing parapet.
6 out of 62
Tulkarem Hospital
-BOQ-
4 Block Work:
The contractor shall, when pricing the rates of this bill, take into
consideration including and allow for the costs or expenses of all
requirements stipulated in the preambles, drawings and
technical specification of the contract.
4.1 Supply and construct 10cm hollow concrete block in cement and M2 2200
sand mortar (1:4) for internal portion walls, the price includes
cost of cutting, anchors, bonding, jointing, utilities openings
complete as per drawings, specifications and as directed by the
engineer.
4.3 Ditto, but 7 cm hollow concrete block around column starters on M2 100
the new roof including sand cement mortar fill.
Supply and cast B300 concrete lintels or griddles above block M3 40
works at door or window level across the whole length of block
walls and in places as directed by the engineer. The price
including shuttering and the supply & installation of steel
reinforcement 4nos of 12mm dia. and with stirrups 8mm @ 20
cm c/c
4.4 Supply and install 3 cm "Randopan" extruded polystyrene M2 930
boards for external stone walls, of density 24 kg/m3 as shown
on drawings.
7 out of 62
Tulkarem Hospital
-BOQ-
5 Plastering Works:
The contractor shall, when pricing the rates of this bill, take into
consideration including and allow for the costs or expenses of all
requirements stipulated in the preambles, drawings and
technical specification of the contract.
5.1 Supply and install internal plastering for walls, columns, arches M2 5200
drop beams, softies of slabs & beams, shaft walls etc
,composed of 3 coats, a bond coat 1:1, base coat 1:4, and finish
coat 1:5 as specified. The price includes the corner beads,
casing beads, metal lath, scaffoldings, shuttering, bonding
agents and the requirements as specified .
5.2 Ditto, but supply and install internal plastering for ceiling M2 900
5.3 Ditto but supply and install external plastering for parapet wall, M2 800
external walls or shafts and wherever needed composed of 3
coats a bond coat 1:1, a base coat 1:4 and a finish coat 1:2 with
water proofing materials all as specified.
8 out of 62
Tulkarem Hospital
-BOQ-
6.2 Supply and install 20x20cm glazed ceramic class (A) tiles for M2 900
walls cladding of different colours. The tiles shall be laid and
fixed to the walls in patterns, style and forms of grouting&
jointing as directed by engineer using approved adhesive
materials. The price also includes the cost of surface
preparation to receive tiles, which shall include two coats of
cement plaster (scratch and float coat), approved adhesive
materials, grouting, aluminum protection angles as approved by
the engineer.
6.3 Ditto, but 30x30cm ceramic tiles class (A) "Negev" model # M2 1500
9001 or equivalent for walls cladding of different colours. The
tiles shall be laid and fixed to the walls in patterns, style and
forms of grouting& jointing as directed by the engineer using
approved adhesive materials. Price includes the cost of surface
preparation to receive tiles, which shall include two coats of
cement plaster (scratch and float coat), approved adhesive
materials, grouting, protection angles as approved by the
engineer.
6.4 Ditto, but anti bacteria ceramic 20x20cm class (A) closured wall M2 130
tiles for surgery& sterile stores using special adhesive materials
and anti fungus grouting materials as per manufacturer
instructions and in accordance with the MOH requirements and
related Standards.
6.5 Supply and install non slip ceramic floor tiles class (A) M2 200
20x20*0.8cm of different colours, the price includes the mortar
(1:3) with water proofing materials, the sand cement fill,
cutting& trimming around floor utilities and pointing as specified.
the tiles shall be laid and fixed in patterns, style and forms of
grouting& jointing as directed by the Engineer.
6.6 Ditto, but 30*30*0.8 cm granite porcelain floor tiles of different M2 900
colours as made by TAU ceramic, Matt finish or equivalent, the
tiles shall be laid and fixed in patterns, style and forms of
grouting& jointing as directed by the Engineer.
6.7 Ditto but 2cm thick Perlato marble for elevator walls, the rate M2 50
include cuttings, recesses for utilities, cut pieces, rounding,
jointing& polishing, anchoring& all fixing accessories. The work
covers the cladding of elevator door sides and lintels.
6.8 Supply and install 3cm thick, 10.5 cm wide local polished cut MR 120
stone for window thresholds with mitered edge as shown on
drawings.
9 out of 62
Tulkarem Hospital
-BOQ-
6.10 Supply and install 3cm thick "Perlato" marble for stair No. 75
treads(155*34*3 cm) polished one face & edge with chamfered
edges matching the existing material . The treads should be
bedded on 3cm mortar (1:3), a sand bed and pointing works.
The rate includes an edge piece for water stop.
6.16 Ditto, for sterile area but with out copper strips. M2 100
6.17 Supply and install VINYL Anti static flooring type Armstrong M2 30
2mm thick or equivalent for surgery rooms, sterile stores and as
directed. The price includes the installation of skirting and
copper mesh under tiles every 30cm using 1cm wide copper
strip . This mesh should be connected with the earth system of
the building. The pvc flooring should be fixed using conductive
adhesive and complete seal of joints all in accordance to
manufacturer instructions and MOH standards.
6.18 Ditto, for sterile area but with out copper strips. M2 30
10 out of 62
Tulkarem Hospital
-BOQ-
7 Water Proofing
The contractor shall, when pricing the rates of this bill, take into
consideration including and allow for the costs or expenses of all
requirements stipulated in the preambles, drawings and
technical specification of the contract.
7.1 Supply and install roof water proofing membrane 5mm thick M2 2300
covered with quartz granules, Pazkar or equivalent, for main
roof, machines roofs, stairs roofs, parapet walls and where
required the price includes the application of primer coat GS474
at a rate of 25 kg /m2, installation of 15*15cm angle fillet,
grooves, groove sealant, groove cover, joints over lapping,
backing sheets or pieces all around external& internal corners,
roof drains, machines foundations or up stands, roof door
thresholds and silver paints along the joints and all necessary
material and workmanship to complete the works as shown in
the drawings and as per manufacturer instructions and codes of
practice.
7.2 Supply and apply three coats of bitumen (25/75) at rate of M2 270
500g/m2 for each layer with two layers of fiberglass in opposite
directions including primer coat GS474. The price includes
5*5cm angle fillet with smooth sand cement mortar(1:3) and
5cm thick sand cement screed with water proofing agent as
surface layer before applying the water proofing coats.
7.3 Supply and install a sloped light weight foam concrete of density M2 2050
1000kg/m3 on the roof ( the thickness to meet the level and
slopes shown on drawings). The rate includes cost of applying
2 cm cement screed layer above the light weight concrete.
11 out of 62
Tulkarem Hospital
-BOQ-
8 Carpentry Works
The contractor shall, when pricing the rates of this bill, take into
consideration including and allow for the costs or expenses of all
requirements stipulated in the preambles, drawings and
technical specification of the contract.
8.1 Fabricate, supply and install the following wooden doors
complete with the metal frames, all necessary fixing
accessories, glazing, heavy duty roller hinges, stoppers,
louvers, grills, the required hydraulic closures, hardware,
protection panels and ironmongery , painting of the frame and
the exposed wooden surfaces of the door panels, the unit rate
shall also include all the works described herein below:
* The wooden door leaf shall be 45mm thick with required filling, 5
mm thick class A plywood facing on each side, the exposed
surfaces of the door panel shall be hard wood "Zan" 52*35 mm
tongued and grooved in the internal wooden fillings, sealing
strips around door panel, and door closure German made where
shown and required on the drawings, all as shown on the
drawings.
* Supply and install of heavy duty hinges, locks, cylinders are
"Yardini" or equivalent. locks to toilets-vacant/ occupied "Yardini
" type 7008 all doors shall be provided with master key system.
The hierarchy shall be specified before the supply of lock sets.
* All exposed edges , louvers and door frames are" Zan" wood
and should be painted with 3 coats of liquor paint. the metal
doors frames shall be painted with primer coat of meginol
special gray 270-004 and two coats of polyour matt oil. the
colour shall be selected by the engineer.
* Door filling material should not be less than 80%.
* Rate for smoke proof doors include 100% filling , sealing strips
around door panel including the bottom of panel.
8.1.1 D01 ( 1.20 * 2.10 m) No. 23
8.1.2 Ditto, but D01G ( 1.20 * 2.10 m) with grills No. 3
8.1.3 D02 ( 1.10 * 2.10 m) No. 3
8.1.4 D03 ( 0.95 * 2.15 m) No. 21
8.1.5 D04 ( 0.95 * 2.10 m) No. 12
12 out of 62
Tulkarem Hospital
-BOQ-
13 out of 62
Tulkarem Hospital
-BOQ-
9 Suspended ceiling
The contractor shall, when pricing the rates of this bill, take into
consideration including and allow for the costs or expenses of all
requirements stipulated in the preambles, drawings and
technical specification of the contract. Rates for all suspended
ceilings works includes suspension system with anchors to the
structure, L& Z, main& main profiles, omega profiles. clips,
gaskets and all necessary fittings in accordance to the
manufacture technical data and related standards covering this
type of works, The rate includes also cutting and preparation for
installing lighting fixtures, ceiling recess, maintenance
openings, grills, ceiling utilities... etc.
9.1 Supply and install suspended ceiling for bathroom, utilities and M2 200
wet areas made from 30cm non perforated formed galvanized
metal trays of 0.6mm thick and 45mm high. The trays should be
supplied pre painted and oven cured. The unit rate shall also
include acoustic rock wool mats, 25mm thick and 25kg/m3
density, wrapped in black non inflammable dust proof sags in
accordance with specifications and the related Standards.
9.5 Ditto, but for clean room areas type "Clima Plus USG" class M2 300
100 ceilings or equivalent.
9.6 Ditto, but 60x60cm acoustic tiles suspended ceiling, type M2 100
Armstrong Georgian drop type or equivalent.
9.7 Supply and install vertical and horizontal gypsum boards 12mm M2 250
thick for walls and ceiling cladding and for other decorative
works. The price shall include all decorative beams, edges,
recessed slab, squares, cuts, suspension& structural profiles--
etc to any shape and patterns to complete the works as
approved by the engineer.
14 out of 62
Tulkarem Hospital
-BOQ-
10 Painting Works:
The contractor shall, when pricing the rates of this bill, take into
consideration including and allow for the costs or expenses of all
requirements stipulated in the preambles, drawings and
technical specification of the contract.
Type of paint shall be in accordance with the specification and
the applicable Standards. The contractor should allow in his
pricing that the engineer will use as many different colours or
combination of colours to meet an approved colour scheme.
15 out of 62
Tulkarem Hospital
-BOQ-
11 Metal Works:
The contractor shall, when pricing the rates of this bill, take into
consideration including and allow for the costs or expenses of all
requirements stipulated in the preambles, drawings and
technical specification of the contract.
11.1 Aluminum Works
Fabricate supply and install the following powder coated
aluminum doors & windows Napco or equivalent, complete
with double glazing ,sekurit, silicone, handles, locks and oplite
fly screen. Shop drawings must be submitted. All as shown in
drawings and approved by the Engineer .
11.2.1 D12 ( 1.10 * 2.10 m) multi lock smoke proof doors similar to " No. 3
Raf Barih" or equally approved
11.2.2 Ditto, but D13 ( 0.90 * 2.10 m) No. 1
11.2.3 D14 (1.00 * 2.10 m) No. 4
11.2.4 D15 (1.35 * 2.10 m) No. 1
11.2.5 D16 (0.80 * 2.10 m) No. 1
11.2.6 D17 (1.50 * 2.10 m) No. 2
11.2.7 D17 (2.20 * 2.10 m) No. 1
11.3 Fabricate supply and install steel handrails, similar to the MR 45
existing handrail in the staircase and as shown on drawings,
including fixing accessories, matching the . The rate includes
panting the hand rails with 2 coats of anti rust primer and oil
paint.
16 out of 62
Tulkarem Hospital
-BOQ-
12 Other Works
The contractor shall, when pricing the rates of this bill, take into
consideration including and allow for the costs or expenses of all
requirements stipulated in the preambles, drawings and
technical specification of the contract.
12.1 Supply and install Avis curtain rail as per detailed drawing, Mr. 295
complete with all fixing accessories, Aluminum carrier main
profile and locks.
12.2 Supply and install wall guard rail similar to the existing rails Mr. 100
rendered at the second floor or equivalent with all fixing
accessories. The rate includes the stop ends and external
corners, colour to be selected by the Engineer.
12.3 Corner protection similar to the existing rendered at the second No. 150
floor or equivalent(2.10 m) height.
12.5 Supply and install a wooden wall guards for corridors with all Mr. 300
fixing accessories as per the detailed drawings and engineer
instructions. colour to be selected by the Engineer.
17 out of 62
Tulkarem Hospital
-BOQ-
13.1.1 Supply, install and connect standard lighting point internal or Comp. 354
external, in slab or over false ceiling, to include a 16 mm
diameter conduit, 1.5 or 2.5 sq.mm cross-section leads or cable,
and, as required single , double, two way or push button lighting
switch , and outlet for luminaries with junction box and terminals.
13.1.3 Supply, install and connect a 16A wall socket point - to include a Comp. 65
16 mm dia. Conduit, (3x2.5) sq.mm cross-section leads or
cables, and as required 16 A wall socket .
13.1.4 Ditto as item 13.1.3 but double socket. Comp. 36
13.1.5 Ditto as item 13.1.3 but with water proof socket. Comp. 66
13.1.6 Ditto as item 13.1.4 but with water proof cover. Comp. 13
13.1.7 Supply, install and connect a three-phase (5x16) A, single-circuit Comp. 1
wall socket point, to include a 23 mm diameter conduit, (5x2.5)
sq.mm cross section leads or cables and a (5x16) single-circuit
wall socket accessory .
13.1.8 Supply, install and connect Intercom connection point (Price Comp. 36
includes 16 mm diameter conduit with a standard Intercom
cable, leading from point to the Intercom section in LV box).
13.1.9 Supply, install and connect Public Address System connection Comp. 11
point (Price includes 16 mm diameter conduit with cable,
leading from point to the LV box or to the nearest point).
13.1.10 Supply, install and connect Fire Alarm connection point (Price Comp. 105
includes 16 mm diameter conduit with cable, leading from point
to the LV box or to the nearest point).
13.1.11 Supply, install and connect TV connection point (Price includes Comp. 19
23 mm diameter conduit with cable, boxes , and the socket
outlet leading from point to the LV box).
13.1.12 Supply, install and connect SAT connection point (Price includes Comp. 19
23 mm diameter conduit with cable, boxes , and the socket
outlet leading from point to the LV box).
13.1.13 Supply, install and connect Nurse Call connection point (Price Comp. 125
includes 16 mm diameter conduit with cable, leading from point
to the nurse call station).
13.1.14 Supply, install and connect Computer outlet connection point Comp. 10
(Price includes 16 mm diameter conduit with 4 pairs shielded
cable and socket, leading from point to the nearest HUB in the
nearest LV box).
18 out of 62
Tulkarem Hospital
-BOQ-
19 out of 62
Tulkarem Hospital
-BOQ-
13.2.1 23 mm diameter. ML 50
13.2.2 29 mm diameter. ML 50
13.2.3 36 mm diameter. ML 50
13.2.4 50 mm diameter. ML 50
13.2.5 4" diameter. ML 50
13.2.6 6" diameter. ML 50
21 out of 62
Tulkarem Hospital
-BOQ-
22 out of 62
Tulkarem Hospital
-BOQ-
23 out of 62
Tulkarem Hospital
-BOQ-
24 out of 62
Tulkarem Hospital
-BOQ-
13.7.1 Type (A) 2x36W fluorescent light fixture Prismatic type. Unit 43
13.7.3 Type (B) Down light, with reflector lamp recessed in false ceiling Unit 61
40W, IP44 die cast aluminum and stainless steel safety glass
reflector of pure anodized aluminum.
13.7.4 Type (C)18W fluorescent light fixture with polycarbonate body Unit 31
white and opal diffuser, wall mounted, IP54.
13.7.5 Type (E) 1 x 8W fluorescent emergency exit sign luminaries Unit 12
with white steel body, for maintained emergency lighting of 3
hour duration, legend panels (3) included (down, left and right).
13.7.9 Type (O1) 2x34W sealed fluorescent lighting fixture , recessed Unit 8
in false ceiling, with prismatic diffuser, IP65.
13.7.11 Type (O2) 4x18W sealed fluorescent lighting fixture , recessed Unit 60
in false ceiling, with prismatic diffuser, IP65.
13.7.13 Type (K) 2x36W, fluorescent lighting fixture, ceiling mounted Unit 60
with prismatic diffuser ( Internal primes) IP20.
13.7.14 Type (KE) Ditto as K but with emergency charger. Unit 19
13.7.15 Type (L) Down light, recessed in false ceiling, with PL-C 13 W Unit 19
compact fluorescent energy saving lamp, cast aluminum cover
and ring silver ( frosted) aluminum reflector, IP20.
13.7.16 Type (M) 2x36W, fluorescent lighting fixture, ceiling / pendant. Unit 4
Body of grey fiber-glass reinforced polyester, prismatic
polycarbonate diffuser, IP54.
13.7.17 Type (ME) Ditto as M but with emergency charger. Unit 2
13.7.18 Type (P) 4x18W, fluorescent lighting fixture, recessed in false Unit 18
ceiling, with prismatic diffuser ( Internal primes), IP20.
13.7.19 Type (QE) Ditto as P but with emergency charger. Unit 2
13.7.20 Type (Q) 4x18W, fluorescent lighting fixture, recessed in false Unit 10
ceiling, with double parabolic reflector and louvers, IP20.
25 out of 62
Tulkarem Hospital
-BOQ-
26 out of 62
Tulkarem Hospital
-BOQ-
27 out of 62
Tulkarem Hospital
-BOQ-
28 out of 62
Tulkarem Hospital
-BOQ-
29 out of 62
Tulkarem Hospital
-BOQ-
30 out of 62
Tulkarem Hospital
-BOQ-
31 out of 62
Tulkarem Hospital
-BOQ-
13.14.1 Supply install and connect 30KVA uninterruptible power supply No. 1
(U.P.S.) system, consisting of a charger/rectifier unit, a solid-
state inverter unit, and a static bypass transfer switch, Power
and control connecting cables between the U.P.S. system and
the battery bank, including protective devices, all in accordance
with the technical specifications .The UPS System back up time
15 min.
(Complete and ready for work, including all required materials
and connections)
32 out of 62
Tulkarem Hospital
-BOQ-
k - Painting as specified .
l - Protection of all sanitary installations .
33 out of 62
Tulkarem Hospital
-BOQ-
d - Painting as specified .
h - Insulation as required .
34 out of 62
Tulkarem Hospital
-BOQ-
35 out of 62
Tulkarem Hospital
-BOQ-
36 out of 62
Tulkarem Hospital
-BOQ-
14.1 Supply and install (S & I) PVC pipes (UAP, Royal, or equally
approved (E.A)) for air conditioning drainage network. Price
includes all kinds of digging in concrete slabs and walls,
supports, hangers and all rubber joints and sealants, syphone
and connection to floor drain and flexible connections and all
types of fittings. All done according to drawings, specifications
and approval of the Engineer.
14.1.2 11/2" Lm 23
14.1.3 11/4" Lm 70
14.2 S & I cast iron type Dukar or E.A 4" waste or stand pipes, Lm 28
running exposed along partitions, false ceiling, walls, shafts,
under tiles or laid in walls. Price include all type of fittings,
supports, hooks, connection to existing manholes, stainless
steel fasteners and all excavation and quarrying, all done
according to drawings specifications and the approval of the
Engineer.
37 out of 62
Tulkarem Hospital
-BOQ-
14.4 S & I Floor drain 4" threaded 15x15cm chrome plated cover No 50
multi inlet adjustable with trap. All complete with floor clean out
plug, HDPE syphone and all types of fittings. The rate shall
include excavation and backfilling for all connections with drain
pipes and fixtures. All done according to drawings, specifications
and approval of the Engineer.
14.4.1 Ditto, but connection box 4"/2" type Lipski or E.A, all done No 10
according to drawings, specifications and approval of the
Engineer.
14.5 S & I heavy duty non adjustable 11x11 cm floor clean out with No 40
HDPE body, with gas and water tight ABS plug and frame,
complete with all needed elbow and all types of fittings, all done
according to drawings, specifications and the approval of the
Engineer.
38 out of 62
Tulkarem Hospital
-BOQ-
15.1 S & I HDPE pipe and fittings as made by Costline or E.A. The
rate shall include all needed connections to existing rain water
pipes and all types of fittings, all done according to drawings,
specifications and the approval of the Engineer.
15.2 S & I Polypropelyne (PP) Roof rain water drain size 4" with No 10
cover of 20x20 plastic mesh (REDI make or E.A) to be
connected to rain water vertical pipes with all required fittings,
price shall include the piping works until the connection to the
vertical rain pipe, all done according to drawings, specifications
and the approval of the Engineer.
15.3 S & I REDI or E.A. 4" roof vent with screened cap for vent No 34
stacks including connection to the vent pipe by solvent welding.
The rate include all needed connection accessories, all done
according to drawings, specifications and the approval of the
Engineer.
39 out of 62
Tulkarem Hospital
-BOQ-
16.1 S & I Porcelain wall hung Semi pedestal wash basin for patient No. 31
toilets type SAN-REMO Ideal Standard (IS) or E.A of size
600x490 mm model A7460. The rate shall include Fixing
galvanized screws, White Color syphone" heavy duty" and all
the needed accessories to complete the job as per drawings,
specifications and the approval of the Engineer.
16.2 S & I Chrome plated gear mixer type CERADISC (IS) model No. 42
A5390 or E.A complete with all the needed fixing accessories,
sockets, copper adaptors and 3"/8" angle valves type (Giacomini
or E.A.) to connection with water pipes. All to be done as per
drawings, specifications and the approval of the Engineer.
16.3 S & I Porcelain floor monted W.C white color size 670x355 No. 29
European type SANREMO (IS) S-trap model G6401 or E.A.
Price shall include all fixation and hanging bracket, 9-lt capacity
cistern, valves, fittings, hard solid seat and 13mm stop angle
valves, chrome plated 13mm hose, and accessories, side l m
length 13mm Chrome plated hand shower for wc (heavy duty)
with spring nozzle outlet and all other required materials,
including connection to drainage system and water system
including 3/8" Angle valve (type Giacomini or E.A.). All to be
done as per drawings, specifications and the approval of the
Engineer.
16.4 S & I stainless steel paper holder type BOBRICK model B-6699 No. 29
or E.A for single roll fixed to wall with all needed fixing
accessories, all to be done as per drawings, specifications and
the approval of the Engineer.
16.5 S & I stainless steel sink for kitchens of size 40x50 cm (single No. 9
bowl) like (Rocca or E.A ) of thickness 18/10 Price shall include
connecting to drain of system by 2" HDPE pipes inside sanitary
blocks, also propper fixation to marble, all to be done as per
drawings, specifications and the approval of the Engineer.
16.6 S & I chrome plated mixer type Cerlaman (IS) A5396. With steel No. 9
wire mesh, and connection to water supply with 3/8" Angle valve
type Giacomini or E.A.), including all the required fittings, all to
be done as per drawings, specifications and the approval of the
Engineer.
16.7 Supply and install 316 stainless steel gauge 12 sluice sink No. 1
complete with chrome plated swivel - spout mixer type (IS)
A5396 or E.A. with steel wire mesh. Price includes connection to
water supply with 3"/8" angle valve type (Giacomini or E.A.),
including all the required fittings, all to be done as per drawings,
specifications and the approval of the Engineer.
40 out of 62
Tulkarem Hospital
-BOQ-
16.8 Heavy duty soap dispenser type BOBRICK model B2111or EA. No 9
with all fixing accessories needed. All to be done as per
drawings, specifications and the approval of the Engineer.
16.9 Heavy duty towel paper holder type 304 st st BOBRICK model B- No 4
6699 for single roll to be fixed at wall with all fixing accessories
needed. All to be done as per drawings, specifications and the
approval of the Engineer.
16.10 S & I Porcelain floor mounted janitor closet type (IS) model No 1
R3852or EA. The rate includes grilled cover, fixing screws,
rubber and all needed fixing accessories. The rate shall include
S & I of 11/2" Flush valve type (IS) and Chrome plated single
tap for cold water. All to be done as per drawings, specifications
and the approval of the Engineer.
16.11 S & I Chrome plated shower gear mixer type CERADISC (IS) No 26
model A5394 or E.A and for the connecting rod model A3052 or
E.A, compete with hand shower, flexible hose 150mm length,
fixing anchor and all needed accessories, All to be done as per
drawings, specifications and the approval of the Engineer. And
S & I the following:
16.11.1 Shower syphone heavy duty type Lipski or E.A. with round cover No 26
of 4" size.
16.11.2 Folding shower seat, padded seat, right hand seat type No 5
BOBRICK model B517 or E.A.
16.11.5 Horizontal two way grab bar for handicapped shower 914x1372 No 26
mm type BOBRICK model B-5837 or E.A. The rate shall include
for fixing the bar at wall using special mortar mix.
41 out of 62
Tulkarem Hospital
-BOQ-
17.1 Supply and install galvanized Sch-40 pipes for domestic cold
and hot water. The work includes all fittings, valves, required
flow direction signs, TOLGO type hangers, all required fittings,
connection to existing system and all needed accessories.
17.1.1 1/2" LM 90
17.1.7 3" LM 30
17.2 Supply and install 13mm thick insulation for domestic hot water
and circulation pipes type ANAVID or E.A. The work includes
insulating all fittings, valves, non-return valve … etc., and
wrapping with 10cm plastic wrap, also required flow direction
signs,.
17.2.1 1/2" LM 90
17.2.7 3" LM 30
17.2.8 Ditto but 6 mm thick insulation for cold water supply pipes LM 140
inside the wall. The work includes insulating all fittings, valves,
and wrapping with 10cm plastic wrap.
17.3.1 11/4" LM 67
17.3.2 11/2" LM 70
42 out of 62
Tulkarem Hospital
-BOQ-
17.3.4 21/2" LM 50
17.4 Supply and install hot and cold water collectors type GIACOMINI
or E.A. The collectors are installed above the ceiling of
bathroom with all required hangers (type GIACOMINI) and
support, air vents, shut-off valves on the collectors outlets, shut-
off valves on the collectors inlets, record valves, and all required
accessories to complete the job.
17.5 S & I crossed linked PE pipe 16mm pipe with 25 mm sleeve Lm 1300
type Aquapex or E.A. The rate shall include all fittings eg:
copper elbow inside walls (type GIACOMINI), 1/2" male and
female adaptors and all needed accessories for connection
between copper collectors to fixtures.
17.6 S & I Heat exchanger of copper coil type cap. 180000 Kcal/hr of L.S 1
manufacturer (zilmat or E.A) price includes all necessary fittings
and all pipes fittings and all control system (including Electrical
Control Board), thermostate and differential (Honeywell or E.A )
and all the required materials and gadgets to complete the job,
according to drawings, specifications, and approval of the
Engineer.
17.7 S & I In line centrifugal water pump (in alternating mode) for
circulating domestic hot water as made by Grundfos, Armstrong
or E.A. The rate includes all fixing accessories , mounting base,
flexible connection , pressure gage at suction and discharge,
strainer, complete insulation, water proof power switch,
aluminum cover to protect the pump from rain, concrete base,
rubber isolators, flow direction signs, supply and return headers
as shown on drawings, electrical controlers and electrical control
boards with all required electrical connections, and all needed
parts to complete the job according to drawings and
specifications and the approval of the Engineer.
43 out of 62
Tulkarem Hospital
-BOQ-
17.8 S & I expansion vessel of size 400 L, closed vertical diaphragm L.S 1
type, operating conditions: 10 bar, 110 °C The unit price shall
include isolating, pressure regulating, drain, relief, double check
and automatic air vent valves, pressure gauge, gas filling
connection, base frame and all works and accessories required
to complete the work as shown on the drawings and as per the
supervision engineer's requirements.
17.9 S & I domestic hot water calorifiers, vertical shell & tube storage L.S 1
type of size 200 L, 8 bar working pressure, hydrostatically tested
for 1-1/2 times the working pressure. The unit price shall include
a thermometer, an ASME rated pressure and temperature relief
valve, isolating valves, drain valves, check valve on cold water
make-up line, automatic air vent, support, insulation with 1-1/2"
foam insulation and protected with 0.7mm GI sheet cladding, all
as required as on drawings and as per supervision engineer's
requirements.
44 out of 62
Tulkarem Hospital
-BOQ-
18.1 Wall mounted fire cabinet 120x80x30 cm equiped with 1" No. 5
swinging hose reel 25 m polystrene hose 1" aluminum nozzle, 1"
ball valve, 12 kg powder extinguisher, 2" linen hose (2 x 15 m)
with quick coupling, 2" nozzle, 2" landing valve, 2" ball valve,
and all required fittings and valves.
18.3 Supply and install black steel Sch40 pipes jointed by welding for
diameters above 2" and by threads for 2" pipesand below, all as
made by MODGAL or E.A. The work also include all valves,
strainer, unions, nipples, fittings, hangers and all needed other
accessories including painting with the final red color paint
according to specifications and the approval of the Engineer.
18.3.1 3" LM 20
18.3.2 21/2" LM 13
18.3.3 2" LM 95
45 out of 62
Tulkarem Hospital
-BOQ-
19 HVAC system:
The contractor shall, when pricing the rates of this bill take
into consideration including and allow for the cost
expenses of all requirements stipulated in the preambles,
drawings and technical specifications of the contract. Also
the contractor must consider the fact that this project is a
running complex and must be kept as so during the whole
period of construction.
19.1 S & I of an air cooled chiller of capacity 152 Ton as made by L.S 1
Daikin (Japan), Carrier (France), York (USA) or EA.The chiller is
a heat pump type operating with friendly to nature refrigerant
(R407-C) and runs with hermatic scroll type compressor, leaving
water Temperature = 7.2 C and inlet water Temperature = 12 C,
all in accordance with the prevailing climate conditions of the city
of Tulkarem. The unit shall be equipped with direct drive
condenser propeller, condenser fan motor, heat exchanger, high
and low pressure switch, anti freez sensor, braided flexible
connections, outlet water temperature sensor, return water
temperature sensor, ambient temperature sensor, crank case
heater, supply and return headers as shown on drawings,
double regulating valves, filter drier, sight glass, service valves,
water flow switch and pressure gage (high & low), electrical
controlers and electrical control board with all required electrical
connections,. The work includes but not limited to concrete base
and all requirements for proper installation and operation, all
done according to drawings specifications and approval of the Engi
19.2 S & I fan coil unit with forwad curved fans as made by Daikin
(Japan), Carrier (France), York (USA) or EA. The unit shall be
with a single coil, stainless steel drain pan, and with all parts
such as 3-way valve, inlet & outlet ball valves type GIACOMINI
or E.A, strainer, inlet and outlet rubber flexible connections with
braided steel, test point valves, washable flat filter, multi speed
electric motor and room thermostat with three speed switch (wall
mounted type installed inside lockable protection box). The rate
includes connecting the unit to piping including S & I of the
following:
46 out of 62
Tulkarem Hospital
-BOQ-
19.3 S&I aluminum supply air ceiling diffusers as made by cooling No. 88
industries or E.A, four-way square type with removable core, key
operated opposed-blade volume damper and equalizing grid,
suitable for mounting flush with false ceiling. The unit price shall
include connection to duct with flexible insulated duct of
compatible diameter and of maximum 1 meter in length , and all
accessories and works required to complete the work, all done
according to drawings, specifications and approval of the
Engineer. Size 12"X12"
19.4 S&I aluminum supply air wall mounted diffusers (grill type) as
made by cooling industries or E.A, key operated opposed-blade
volume damper and equalizing grid, suitable for mounting flush
with the wall. The unit price shall include connection to duct with
flexible insulated duct of compatible diameter and of maximum 1
meter in length , and all accessories and works required to
complete the work, all done according to drawings,
specifications and approval of the Engineer.
19.6 Supply and install perforated aluminum ceiling diffusers for the No. 4
operating theatres of size 18"X18", ceiling module with neck size
as shown on the drawings, flush face, adjustable 4-way
deflectors, with integral or field fabricated plenum box, key
operated opposed-blade volume damper and equalizing grid
with plazma filter. The unit price shall include connection to duct
via flexible connection not exceeding i meter in length, and all
accessories and works required to complete the work as shown
on the drawings and as per the specifications and supervision
engineer's instructions.
47 out of 62
Tulkarem Hospital
-BOQ-
19.7 S & I modular, weather proof type 100% fresh air packaged unit
constructed from aluminum penta post with double skin panels
and insulated with injected polyurethane 2" thick as made by
Daikin (Japan), Carrier (France), York (USA) or EA of capacity
6.5 Ton. The unit shall be equipped with scroll type
compressor(s) and shall run by friendly to environment
refrigerant. The rate includes built-in electrical heating battery of
18KW capacity made of stainless steel finned tube heating
elements covering all the face area of the air flow and including
all protection gadgets such as air flow switch, automatic and
manual reset thermal cut-outs, and controlled via 4 stages
controller. It should also include a built-in plate heat exchanger
for energy recovery between the return (exhausted) air and the
fresh air supply.
The unit shall be supplied with backward curved propeller fans No. 1
(supply and exhaust) suitable for external static pressure of 1.5"
each, installed on vibration isolators, dampers for fresh and
supply air, aluminium washable type pre-filter, V-type bag filter,
and 99.997% HEPA filter. An audiable and visual alarm should
be built-in also for the HEPA filter maintenance purposes, all
including the needed fixing accessories and electrical controlers
and electrical control board with all required power and control
connections to the unit, as well as, air temperature sensors,
where all shall be rendered according to drawings, specifications
and the approval of the Engineer. Packaged Unit: P.R.C/H -
OP.TH
19.8 Supply and install minimum two stage cooling and four stage No. 1
heating thermostat for the packaged unit made by Honeywell or
EA.
19.9.6 Fresh Air: 1235 CFM for fresh air (model c40/4m) No. 1
48 out of 62
Tulkarem Hospital
-BOQ-
19.10 Supply and install single skin galvanized steel duct made M2 940
according to SMACNA standard and requirements vis-a-vis
support, sizing, branching, air tightening, jointing, etc, with 2"
thick, 12kg/m3 density glass wool insulation wrapped with
reinforced aluminum foil, which shall be confined in place by
aluminium adhesive tape at the joints and spirally wound
aluminium wire all around and along.The rate shall include all
required hangers, supports, isolators, splitting dampers, canvas
type flexible connections at units inlets and outlets, and all
required accessories needed as shown on drawings, according
to specifications, and to the Engineer's instructions.
19.10.1 Ditto, but with 0.6mm galvanized metal sheet cladding for M2 40
protection of exposed duct work on roof including all screws and
fittings needed, excluding the spirally wound aluminium wires,
where the job shall be rendered according to SMACNA , all in
accordance with the drawings, specifications and the approval of
the Engineer.
19.11 Supply and install galvanized steel duct for exhaust system M2 380
made according to SMACNA. The rate shall include all required
hangers, supports, plitting dampers, canvas flexible connections
and all required accessories made as shown drawings,
according to specifications, and to the approval of the Engineer.
19.12 Supply and install black steel Sch.40 pipes for the A/C network
with 19mm insulation and nylon wrapping. The work also
includes all unions, nipples, tees, elbows, hangers, required flow
direction signs, and all other needed accessories to lay the pipe
along its path, all done according to drawings specifications and
approval of the Engineer.
19.12.1 3" LM 26
19.12.5 11/4" LM 45
19.12.7 3/4" LM 45
49 out of 62
Tulkarem Hospital
-BOQ-
19.15 S & I 8" diameter headers at the pumps inlets & outlets as No. 2
shown on drawings. The headers shall include all needed
outlets (with 2" extra clogged outlets on each for future
expasion), ball valves (Giacomini or equivalent), pressure
gauges, thermometers, convexed abd end caps, 24kg/m3
fiberglass insulation, 0.7 galvanized metal steel sheet claddings,
and steel supports.
19.16 S & I and connect motor starter panel with all necessary MCC L.S 1
breakers, starter controllers, protective deivces for pumps,
chillers, air handling units, and all the equipment on the roof.
The price shall include (power cables control wires - galvanized
cable tray, flexible connections ... etc.) from panels to equipment
and all electrical connections for fresh and extract fans on roof,
all done according to drawings specifications and approval of
the Engineer.
19.17 S & I and connect all needed power and control gadgets into the L.S 1
existing electrical panel in boiler room to serve the proposed
boiler. Price shall include MCCB's, relays, power cables, control
wires, indication lights,protective and safety devices, … etc.
50 out of 62
Tulkarem Hospital
-BOQ-
20 Medical Systems:
20.1 Supply and Installation of Medical gas copper piping as per
HTM02.01:
51 out of 62
Tulkarem Hospital
-BOQ-
20.2.1 Recessed area valve control box for medical oxygen and Unit 5
vacuum, including 2 full-port 3-parts NIBCO shut off valves
which controls the supply of gases or vacuum through the
pipelines, and line pressure and vacuum gauges. The valves
diameter varies between 15 up to 35 mm, as per drawings.
The area valves control boxes should also include an
emergency external supply port, equipped with disk and clutch
mechanism for quick plug-in connection of the emergency
external supply source.
As per SILBERMANN model 7210-000 or EA. The front should
be made of labeled transparent polycarbonate flexible
unbreakable cover for easy access in emergency cases.
20.2.2 Same as Item No. 20.2.1 but for medical oxygen, medical Unit 1
compressed air and vacuum. As per SILBERMANN
model 7214-000 or E.A
20.2.3 Same as Item No. 20.2.1 but for medical oxygen, nitrous-oxide, Unit 2
medical compressed air and vacuum. As per SILBERMANN
model 7204-000 or E.A
20.3.1 Local audio-visual pressure alarm box for medical oxygen and Unit 5
vacuum to indicate pressure and vacuum failures by means of
green LED, red LED, audio buzzer and pressure or vacuum
gauge for each gas, as well as shut-off valves for each gas or
vacuum, operated by means of one central PC card
(microprocessor card) and pressure/vacuum switches for each
gas, recessed type with anodized aluminum panel.
20.3.2 Same as .Item No. 20.3.1 but for medical oxygen, medical Unit 1
compressed air and vacuum As per SILBERMANN model 7177-
1100 or E.A
20.3.3 Same as Item No. 20.3.1 but for medical oxygen, nitrous-oxide, Unit 2
medical compressed air and vacuum as per SILBERMANN
model 7178-110 or E.A
52 out of 62
Tulkarem Hospital
-BOQ-
20.6.1 Recessed type, chrome plated, color and pin coded die-cast Unit 8
front assembly, primary check inlet/outlet valve with decorative
frame for two different codes of Oxygen and Vacuum, a hanging
slide for 2 liters vacuum collecting bottle must be included as per
SILBERMANN model 3236016 or E.A
20.6.2 Same as Item No. 20.6.1 but for Oxygen, Nitrous Oxide, Unit 1
Compressed Air and Vacuum as per SILBERMANN model
3236019 or E.A
53 out of 62
Tulkarem Hospital
-BOQ-
20.7.2 Same as Item No. 20.7.1 but for two beds Unit 4
20.7.3 Same as Item No. 20.7.1 but for three beds Unit 3
20.7.4 Same as Item No. 20.7.1 but for four beds Unit 5
As per SILBERMANN modular system model 2000-000, or EA.
54 out of 62
Tulkarem Hospital
-BOQ-
20.8 Supply and Installation of Vital Life Support Column for one
Emergency bed, according to EN-793 and EN-60601-1-2 as
per Silbermann or E.A:
20.8.1 Vertical column surface made of medical high pressure laminate Unit 6
decorative Trespa, electro-polished anodized 2000 mm x 600
mm x 250 mm. Aluminum. structure
Horizontal hanging rail and vertical anodized Aluminum tracks
provides three-dimensional hanging of various type of
equipment, complete with two medical oxygen outlets, two
medical compressed air outlets, two vacuum outlets, four
essential electrical sockets and four UPS coded sockets, each
socket is equipped with built-in normal-power on LED indication
connected to independent electrical circuit and marked terminals
for each socket, with two potential equalization grounding
sockets connected to main grounding line by two separate
grounding bridges
as per SILBERMANN model FreeStand 2000 or E.A
55 out of 62
Tulkarem Hospital
-BOQ-
20.12.1 Baby Bath Tub as per Soema model Lido Baby/01 and shall Unit 3
comprise of:
• Acrylic Ceramic
• Bath tub & washing sink
• Hand shower
• Electronic water tab
• Thermostatic water mixer
• Transformer
20.13 Electronic hand washing scrub sinks, SOEMA or E.A:
20.13.1 Stain-less steel suspended electronic hand washing units with Unit 1
channel type tank and paneling under basin, two electronic taps,
one electronic soap dispenser and thermostatic mixer.
Made of AISI 316 stainless steel , size 120x55x110 cm.
overflow-proof tank (35 cm deep) with rounded inner edges and
inclined front part to prevent water from spraying outside
Cat. No. # C618MXSR
56 out of 62
Tulkarem Hospital
-BOQ-
21 Lifts:
The contractor shall, when pricing the rates of this bill take
into consideration including and allow for the cost
expenses of all requirements stipulated in the preambles,
bill of quantities, drawings and technical specifications of
the contract.
The described work shall include moving all the parts from
the existing machine room to the new location.
Additionally, price of installation shall include, but not
limited to the following essential parts, workmanship,
erection equipment and tools, labor, as well as any
required accessories, metal cutting and paint:
57 out of 62
Tulkarem Hospital
-BOQ-
21.1 Remove all the parts of the elevators from the existing machine L.S. 1
rooms to new locations as shown on drawing including the
electric switchboard and all electrical and mechanical works
needed (and labor). The price should include also all iron
structure(material and labor) needed to complete and fix the
new location in the room as per drawings, specifications and the
approval of the Engineer.
21.2 Supply and install stainless steel sheet 2 mm thick door posts Unit 3
same as the existing, complete with side and up panels and all
the required electrical and mechanical works needed to
complete the job as per the preamble drawings, specifications
and the approval of the Engineer.
21.3 Supply and install all the required parts inside the elevator shaft Unit 3
that are needed to complete the extension process to the next
floor. Price includes all the required electrical and mechanical
works needed to complete the job as per the preamble
drawings, specifications and the approval of the Engineer.
58 out of 62
Tulkarem Hospital
-BOQ-
22.1 Removing all existing vent caps at roof and re-instalation on No. 18
future roof where required as shown in drawings. The work shall
include all piping works, openings in concrete for the existing
slab, and all required labor, materials and fitting equipment
according to the instruction of engineer. Price also includes the
replacement of any of the following damaged parts with new
(same in size, capacity and quality) part:
59 out of 62
Tulkarem Hospital
-BOQ-
22.2 Removing all existing domestic hot and cold water units and LS 1
pipes at roof and re-instalation on future roof as shown in
drawings. The work shall include all piping from main riser to the
units, pumps, valves, strainers, and galvanized ducts, booster
pumps, openings in concrete for the existing slab, electrical
panel and all required labor, materials and fitting equipment
according to the instruction of engineer. Price also includes the
replacement of any of the following damaged parts with new
(same in size, capacity and quality) part:
60 out of 62
Tulkarem Hospital
-BOQ-
61 out of 62
Tulkarem Hospital
-BOQ-
62 out of 62
Project: Tulkarem Hospital
Electrical Summary
14
Total of waste and drainage works:
15
Total of roof drain works:
16
Total of Sanitary fixtures and their accessories works:
17
Total of Domestic Cold and Hot Water system works:
18
Total of Fire Fighting system works:
19
Total of HVAC System works:
20
Total of Medical Systems works:
21
Total of Lifts works
Main Summary
Contractor:
Signature:
Date: