Академический Документы
Профессиональный Документы
Культура Документы
In this Article today we will talk about the basic information of Bar Bending schedule.
These are the important Tips to make and find the steel cutting length.
Bar Bending Machine | Bar Bending Schedule
In Civil Engineering Bar Bending Schedule is the important part of Estimation chart. In
the Bar Bending schedule provides the reinforcement (steel) calculation for
reinforcement of concrete column , beam and slab cutting length and also use to find
the types of bends of length which we provide in steel structures.
BBS is used in finding cutting length of steel and total weight of steel per unit area. and
we can make the bar bending schedule in Ms office Excel software.
1. Hook Length:-
Hook
Length | Bar Bending Schedule
Total Length of stirrup = Total length of Bar + 2 x Hook Length (Two hooks)
The additional length (la) that is introduced in the simple, straight end-to-end length of
a reinforcement bar due to being bent up at (Theta) say 30o to 60o, but it is generally
45o = l1 – l2 = la
Where,
For 45 Deg | Crank length is provided in Slab Shear stress is maximum at supports in
Slab. So, to resist this stress we usually crank the bars at the ends of supports in slab.
Now a days Extra bar is also provided under every crank bar. To keep crank bar in
position. (Refer above image for clear idea).
5. Bend Hook Length Formula for Column:-
Bend Length is usually provided in columns at ends to tie the columns to the footings.
Hook
Length Formula for Column | Bar Bending Schedule
Suppose the length of building is 20 m. The standard length of Rebar is 12m. We have
to join two Re-bars for the total length of building. In order to Join the two bars
(overlap). Overlap length is adopted.
Hook’s Length for Stirrups are mostly equal to 10d, Where d is dia of bar.
where,
Cutting
Length of Spiral Stirrups | Bar Bending Schedule