Академический Документы
Профессиональный Документы
Культура Документы
Previous Screen
Product: EXCAVATOR
Model: 330D L EXCAVATOR B6H
Configuration: 330D L Excavator B6H00001-UP (MACHINE) POWERED BY
C9 Engine
Systems Operation
320D, 321C, 323D, 324D, 325D, 328D, 330D, 345C, 365C, 385C, M325D and W345C
Excavators Monitoring System
Media Number -RENR8068-04 Publication Date -01/03/2006 Date Updated -29/03/2006
i02301039
The "TOOL PROGRAM" menu allows the user to change settings for the selected tool.
Illustration 1 g01152977
(8) Up key
(15) OK key
The "TOOL PROGRAM" menu option is entered by selecting "TOOL PROGRAM" from the
"SERVICE" menu. Press the up key (8) or down key (13) until "TOOL PROGRAM" is highlighted
in order to select this option. Then press the "OK" key (15). Refer to Illustration 2.
Note: Refer to Systems Operation, "Service Mode" for instructions to get to the "SERVICE" menu.
Illustration 2 g01152219
Press the up key (8) or down key (13) until the desired tool is selected. Press the "OK" key (15) to
program the selected tool. The following screen will be displayed.
Illustration 3 g01152221
Typical screen for "TOOL PROGRAM" item.
Press the up key (8) or down key (13) in order to highlight the setting that is to be changed.
Illustration 4 g01152223
Press the "OK" key (15) in order to move the cursor from the setting to the data value. The data
value will be highlighted.
Illustration 5 g01152224
Press the up key (8) or down key (13) in order to change the value. Press the "OK" key (15) in order
to set the value.
Note: The indication items vary by model. The item that is checked in the following tables may not
be indicated by the machine configuration.
Refer to Table 1 for a list of system components that are available in the "TOOL PROGRAM" menu.
Table 1
Copyright 1993 - 2007 Caterpillar Inc. Mon Mar 5 14:13:42 EST 2007
All Rights Reserved.
Private Network For SIS Licensees.