Академический Документы
Профессиональный Документы
Культура Документы
Steel connections
Data
__________________________________________________________________________________________________________________________
__________________________________________________________________________________
Connection ID : 4
__________________________________________________________________________________
GENERAL INFORMATION
Connector
MEMBERS
Column
Column type : Prismatic member
Section : HS114X3.2
Material : A36
Longitudinal offset : 0 cm
CONNECTOR
Base plate
Position on the support : Center
N: Longitudinal dimension : 50 cm
B: Transversal dimension : 50 cm
Thickness : 1.5 cm
Material : S460
Column weld : E70XX
D: Column weld size (1/16 in) : 16
Override A2/A1 ratio : Yes
Value for A2/A1 ratio : 1
Include shear lug : No
Support
With pedestal : Yes
Longitudinal dimension (pedestal) : 80 cm
Transversal dimension (pedestal) : 80 cm
Thickness : 160 cm
Material : C 3-40
Include grouting : Yes
Grout thickness : 2 cm
Anchor
Anchor position : Customized
Page1
Anchor coordinates:
Coordinate
Transverse Longitudinal
[cm] [cm]
-------------------------------------
15.00 15.00
15.00 -15.00
-15.00 15.00
-15.00 -15.00
-------------------------------------
Page2
Current Date: 5/14/2019 8:30 AM
Units system: Metric
File name: F:\Anchor bolt\Ram connection\Base Plate 2.cnx\
Steel connections
Results
__________________________________________________________________________________________________________________________
__________________________________________________________________________________
Connection ID : 4
__________________________________________________________________________________
DEMANDS
Description Pu Mu22 Mu33 Vu2 Vu3 Load type
[Ton] [Ton*m] [Ton*m] [Ton] [Ton]
-----------------------------------------------------------------------------------------------------
DC1 -0.12 0.00 0.97 0.19 0.00 Design
-----------------------------------------------------------------------------------------------------
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Pedestal
Axial bearing [kg/m2] 717127.30 79301.08 DC1 0.11 DG1 3.1.1;
Base plate
Flexural yielding (bearing interface) [Ton*m/m] 1.58 0.93 DC1 0.59 DG1 Eq. 3.3.13,
DG1 Sec 3.1.2
Flexural yielding (tension interface) [Ton*m/m] 1.58 0.65 DC1 0.41 DG1 Eq. 3.3.13
Column
Weld capacity [Ton/m] 99.44 10.08 DC1 0.10 p. 8-9,
Sec. J2.5,
Sec. J2.4,
HSS Manual p. 7-10
Elastic method weld shear capacity [Ton/m] 66.29 1.06 DC1 0.02 p. 8-9,
Sec. J2.5,
Sec. J2.4
Elastic method weld axial capacity [Ton/m] 99.44 94.53 DC1 0.95 p. 8-9,
Sec. J2.5,
Sec. J2.4
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ratio 0.95
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page1
Major axis
Maximum compression and tension (DC1)
-------------------------------------------------------------------
Maximum bearing pressure 7.93 [kg/cm2]
Minimum bearing pressure 7.93 [kg/cm2]
Maximum anchor tension 1.28 [Ton]
Minimum anchor tension 0.11 [Ton]
Neutral axis angle 0.00
Bearing length 7.30 [cm]
-------------------------------------------------------------------
Anchors tensions
Anchor Transverse Longitudinal Shear Tension
[cm] [cm] [Ton] [Ton]
-----------------------------------------------------------------------------
1 15.00 15.00 0.05 1.28
2 15.00 -15.00 0.05 0.11
3 -15.00 15.00 0.05 1.28
4 -15.00 -15.00 0.05 0.11
Page2