0 оценок0% нашли этот документ полезным (0 голосов)
57 просмотров1 страница
This document provides information about E316LT1-1/4 flux cored wire from Weldcote Metals. It describes the wire as suitable for welding 18% chromium-12% nickel-2% molybdenum steel and extra-low carbon 18% chromium-12% molybdenum steel. The wire performs well for flat, horizontal fillet, and vertical-up welding positions using CO2 or 75% argon-25% CO2 shielding gas, providing a stable arc and good bead appearance. It is well-suited for mechanized horizontal fillet welding due to its wire feeding and deposition properties.
This document provides information about E316LT1-1/4 flux cored wire from Weldcote Metals. It describes the wire as suitable for welding 18% chromium-12% nickel-2% molybdenum steel and extra-low carbon 18% chromium-12% molybdenum steel. The wire performs well for flat, horizontal fillet, and vertical-up welding positions using CO2 or 75% argon-25% CO2 shielding gas, providing a stable arc and good bead appearance. It is well-suited for mechanized horizontal fillet welding due to its wire feeding and deposition properties.
This document provides information about E316LT1-1/4 flux cored wire from Weldcote Metals. It describes the wire as suitable for welding 18% chromium-12% nickel-2% molybdenum steel and extra-low carbon 18% chromium-12% molybdenum steel. The wire performs well for flat, horizontal fillet, and vertical-up welding positions using CO2 or 75% argon-25% CO2 shielding gas, providing a stable arc and good bead appearance. It is well-suited for mechanized horizontal fillet welding due to its wire feeding and deposition properties.
DESCRIPTION: E316LT1-1/4 is suitable for welding of 18%Cr-12%Ni-2%Mo steel(SUS 316)
and extra-low carbon 18%Cr-12%Mo steel(SUS 316L). E316LT1-1/4 is a flux cored wire for Flat, H-Fillet and V-up position welding for CO2 or 75%Ar-25%CO2 shielding gas. It provides excellent usability with stable arc, less spattering, good bead appearance. For mechanized welding of H-Fillet this wire is an excellent choice, as it meets the requirement of superior wire feeding properties combined with high deposition efficiency.
Weldcote Metals believes this data to be accurate and to reflect qualified expert opinion regarding current research. However, Weldcote Metals can not make any expressed or implied warranty as to this information.
IP Code Operating Torque Number of Contacts Capacity of Contacts Operating Angle Cable Size Mechanical Life Electrical Life Working Temp. Working Humidity Material N.W