Академический Документы
Профессиональный Документы
Культура Документы
productspeopleprogress
2 6 0 0 C A T A L O G
Building trust by providing
Since itsSince
founding in 1918,
its founding in 1918, Alemite has crafted a tradition of innovation,
In its first year, the company introduced the first high pressure lubrication
system ever. Alemite went on to develop the zerk fitting, the hydraulic
grease gun and the first sealed and warranted air motor pumps.
Alemite is dedicated to service and support for our customers. Our value-added services include a warranty
program and highly trained technical representatives that are only a phone call away.
Further after-sales service is available through our national system of factory-trained technicians.
Our national and international distributor network provides you with prompt, efficient delivery. Alemite’s
national sales force offers support and training for our distributors.
Please call your local Alemite distributor to place an order. To obtain the name of your local distributor, call
Alemite Customer Service. Office hours are 8 AM to 6 PM EST.
Customer Service 1-800-822-4579
You can rely on our service, quality and support to meet your needs.
Technical Support
Alemite has a Technical Support Team that has expert knowledge on our products. They are readily
available to help solve any problems that you may have.
Technical Support 1-800-628-9069
www.alemite.com
The Alemite website is filled with information from service guides to newsletters. It also has
a downloadable version of this catalog. Discover more @ www.alemite.com.
• Company Profile Product details
• Promotions & Specials
• Advantage Newsletters
• New Product Brochures
• Information Request
• What’s new?
• 2600 Catalog
• Service Guides (includes a breakdown of part numbers)
• Comments
i
Table of Contents
Section 1: Typical Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Section 2: Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ii
Table of Contents
Section 13: Air Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Moisture separators/regulators/lubricators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105-106
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107-108
iii
Section 1 Typical Installations
Piping Recommendations
Pages 60, 71
Air Line
Controls
Page 105
Installation
Accessories
Pages 97, 112
Reel
Assemblies
Page 89
Hose
Page 93
Control
Valves
Page 96
Grease Pumping
ing Systems
Page 60
Section 1 Typical Installations
2
Section 1 Typical Installations
3
Section 2 Lubrication Fittings
Fittings
Demand Quality —
Alemite’s exclusive patented Cold Header Automatic
Production Systems, CHAPS®, manufactures high
Look for the Red Ball
volume fittings that are stronger, more durable and
easier to use than any other fittings available today.
Each CHAPS® fitting goes through more than twenty
quality checks to assure the highest quality level and
lowest defect rating of all fittings manufactured worldwide.
I II Normal Number of
Outside Diameter Nominal Engagement Threads
Approx. Actual Size for Tight per Inch
(Fraction) (Decimal) (P.T.) Joint
Inch Inch Inch (Dimen. “C”)
Inch
1/4"-28 TAPER THD. (SAE-LT) 1/4"-28 TAPER THD. (SAE-LT) 1/4"-28 TAPER THD. (SAE-LT) 1/4"-28 TAPER THD. (SAE-LT)
1/4"-28 TAPER THD. (SAE-LT) 1/4"-28 TAPER THD. (SAE-LT) 1/4"-28 TAPER THD. (SAE-LT) 1/4"-28 TAPER THD. (SAE-LT)
▼
Fitting conforms to Military Standard MIL-F-3541. Number shown is Military Standard Drawing.
1792-B 1770-B1
▼
Fitting conforms to Military Standard MIL-F-3541. Number shown is Military Standard Drawing.
3
/16"
1/8" P.T.F SAE Spl Extra Short 1/8" P.T.F SAE Spl Extra Short
1684-B
7
/32" 7
/32"
1618-B
1/8" P.T.F SAE Spl Short 1/8" P.T.F SAE Spl Short
1611-B 1638-B
8 1958**
7
/32"
7
/32"
**Designed for DUSTPROOF
1/8" P.T.F SAE Spl Short 1/8" P.T.F SAE Spl Extra Short applications. Cap provides a 1/8" P.T.F SAE Spl Short
second seal.
7
7
7
/32" /32"
/32"
1/8" P.T.F SAE Spl Short 1/8" N.P.T.F FEMALE 1/8" P.T.F SAE Spl Short 1/8" P.T.F SAE Spl Short
▼
Fitting conforms to Military Standard MIL-F-3541. Number shown is Military Standard Drawing.
7
/32"
7
/32"
7
/32"
1/8" P.T.F. SAE Spl Short 1/8" P.T.F. SAE Spl Short 1/8" P.T.F. SAE Spl Short
▼
Fitting conforms to Military Standard MIL-F-3541. Number shown is Military Standard Drawing.
9
1/4" PTF Fittings
Widely used for larger bearings on farm machinery and heavy industrial equipment. Recommended for
heavy lubricants in cold weather. Features dirt excluding ball check. Maximum pressure: 10,000 psi.
1627-B 1629-B
1/4" P.T.F. SAE Spl Extra Short 1/4" P.T.F. SAE Spl Extra Short
10
HEX.
7
/16"
DIA.
12
1699 1992-B1 1646-B1 1744-B1
Monel
▼
1921-B 30° 1/8" P.T.F. 1 1/4" 11/32" 7/16" 1968-S STAINLESS (MS-15720-2)
▼
1922-B 67 1/2° 1/8" P.T.F. 61/64" 11/32" 7/16"
1923-B 90° 1/8" P.T.F. 7/8" 11/32" 7/16"
14
Stainless Steel 1/4"-28 TAPER THD. (SAE-LT)
Fitting conforms to Military Standard MIL-F-3541. Number shown is Military Standard Drawing.
90°
1921-B
1921-S
Fitting conforms to Military Standard MIL-F-3541. Number shown is Military Standard Drawing.
15
Hydraulic Couplers
Provides quick, positive and leakproof connection with hydraulic fittings.
B154
Swivel Hydraulic Couplers
Couplers swivel full 360 degrees, lock in any of eight positions. Use 1/8"
NPTF pipe extension to connect coupler to gun outlet.
Part No. 6509-D Standard swivel coupler. Metal seal, length: 3-1/2".
Part No. 6509-E Narrow diameter swivel coupler. Rubber seal, length: 4". 6509-D
16
† For heavy lubricants
17
Button Head Couplers
For use with standard or giant button head fittings.
18
1/8" P.T.F. SAE Short
Figure 3
Flush Type Fittings
For installations where protruding fittings cannot be used. Fittings sit flush, and are not easily damaged.
For use on line shafting pulleys or revolving bearings. Fitting 1814 is a drive type oiler for lubrication with
an ordinary oil can.
Rivet Fitting
Recommended for special applications where threaded or drive fittings
cannot be used. Commonly used for king pin applications.
1/8" P.T.F. SAE Spl Short 1/4" N.P.T.F. 1/8" P.T.F. SAE Spl Short
20
Pin Type Couplers
Provides quick, positive, and leakproof connection with pin type fittings.
Part Thread
Number
VB-942 1/8" NPTF(f) without wing
50491
50491 1/8" NPTF(m) with wing
51185 1/8" NPTF(f) with wing
1/8" P.T.F. SAE Spl Short 1/8" P.T.F. SAE Spl Short
Leakproof Fittings
Leakproof fittings have a Buna-N seal instead of a ball check - for light oils and other fluids up to 5,000 lbs.
applied pressure. To improve reliability of the check valve in these fittings, keep input passages free of
foreign particles. Redundancy of seal should be provided in critical applications where back pressure must
be maintained.
(MS-15006-1)
▲
▼
Fitting conforms to Military Standard MIL-F-3541. Number shown is Military Standard Drawing.
Air Vents
For use on transmissions, differentials, speed reducers, gear housings, etc. (above normal level of lubricant)—
allows air to escape when internal pressures are built up. Special cap prevents water or dirt from entering.
**
1/8" P.T.F. SAE Spl Short 1/8" P.T.F. SAE Spl Short 3/8" P.T.F. SAE Short (Mech)
3018
HEX.
1
/4"
9
/64" 1
/2"
9
/64"
6-40 UNF-2A
23
Part Metric
Number Pack No.
B1608-B
B1743-B
B1610-BL B2103
B1611-B B2105
B1612-B B2106
B1613-B B2107
B1627-B** B2108
B1629-B** B2109
B1637-B1 B2100* - 9 pc assortment
B1641-B
B1688-B
B1911-B1
B1428* - 8 pc assortment
B1827* - 8 pc assortment
2398-1
Section 2 Lubrication Fittings
All Purpose Fitting Assortment
Assortment 2364-1
Metal box contains eight types of popular fittings. Also includes two tools for extracting fittings and
rethreading holes. An identifying chart is included in the cover. Assortment includes:
Part A B C D
Number Overall Effective Thread Shank Hex
Length Length Length Size
43761* 3/4" 3/16" 9/32" 1/2"
43762 1-1/4" 17/64" 11/16" 1/2"
* Male thread is SAE Spl Short
Adapters
Part Type Thread
Number
51942 Str. 1/4"-28 Taper Thread (SAE-LT) (m) x 1/8" NPTF(f)
51943 90° 1/4"-28 Taper Thread (SAE-LT) (m) x 1/8" NPTF(f)
310912 45° 1/4"-28 Taper Thread (SAE-LT) (m) x 1/8" NPTF(f)
Plugs
Part Description
26 Number
1480 1/8" N.P.T.F. Square Head
17831 1/8" N.P.T.F. Hex Socket
170008 1/4" N.P.T.F. Hex Socket
69795 1/8" N.P.T.F. Slotted
328224 1/4"-28 Taper Thd. (SAE-LT) Hex Head
328435 1/4"-28 Taper Thd. (SAE-LT) Thread Forming Hex Head
Bushings
Part A B C D E F
Number Female Male Hex Overall Thread Shank
NPTF NPTF Size Length Length Length
A112 1/8" * 3/8" 11/16" 17/32" 13/32" 3/8"
A113 1/8" * 1/2" 5/8" Flats 21/32" 1/2" ––
40996 1/4" 3/8" 3/4" 23/32" 13/32" 37/64"
45120 1/8" 1/4" 9/16" 3/4" 13/32" 1/2"
131586 3/8" 1/2" 7/8" 25/32" 17/32" 9/16"
Header Blocks
Hard-to-reach machine bearings requiring lubrication can be connected to central points by tubing or whip
hose leading from the bearings to header blocks. Blocks equipped with hydraulic fittings are available for
three or six bearings. With compression fitting connections for 1/4" tubing. Inlet/outlet threads are 1/8"
NPTF(f).
6136
28
Grease Guns
The full line of Alemite grease guns and Accessories are built to withstand the rigors of
the most demanding applications. Grease guns are available in a wide range of types and
capacities to meet your specific lubrication and maintenance requirements. Alemite hoses
and couplers are designed for durability, reliability and safety.
Section 3 Grease Guns
Lever Grease Guns
Standard Duty
Part Number: F101 Grease Gun
Develops 6,000 psi. Three way loading: 14 oz. cartridge, suction
or loader pump. Features air vent, vinyl grip and loader fitting. F101
Includes rigid extension & coupler.
F102
F104
Professional Duty
Part Number: 525 Pistol Grip Grease Gun
Develops 5,500 psi. Three way loading: cartridge, suction or
loader pump. Features automatic variable stroke/pressure, air 550
vent, vinyl grip and loader fitting.
Delivery: 1 oz. per 33 strokes.
525 includes rigid extension & coupler.
550 includes 18” flexible hose & coupler.
Extensions
Rigid Extensions For Grease Guns
Various lengths permit ease of attachment to hydraulic fittings.
Hydraulic coupler ends are triple-jaw type for a superior seal. 6279
Slight pushing action snaps jaws onto fittings. Permits wide
25° leak-proof sealing angle. Ends are 1/8" NPTF(m).
▲
! WARNING: For use with hand operated grease guns only see warning on page 34.
Economical and durable hose. 12,000 psi burst pressure. 1/8" NPTF(m) ends.
▲
! WARNING: For use with hand operated grease guns only. See warning on next page.
For hydraulic fittings. End connections are 1/8" NPTF(m). Maximum working pressure is 4,800 psi and
minimum burst pressure is 12,000 psi.
▲
! WARNING:
The pressure rating on these hose assemblies applies when used with hand operated grease pumping
equipment ONLY, such as grease guns or bucket pumps. DO NOT use with power operated equipment.
Rupture of the hose can result in serious injury such as fluid injection into the flesh. For powered equipment
refer to adapters and swivel devices on pages 97-98 of this catalog, which can be safely used where rapid
pressure rises are encountered.
Push-type Adapter
Part Number: B204
Designed for restricted access fittings. For use with
handguns only.
B204
360° Adapter
Part Number: B205
Complete access to most fittings. Inlet 1/8” NPT(F). Coupler
included. For use with handguns only. B205
B411
36
Lubricators
Part Number: 7531-4
For all pressure gun lubricants. Delivery 1/5 oz. per stroke. Will
develop up to 3,500 psi. Equipped with 5' hose and coupler
assembly (322434). Pump outlet: 3/8" NPTF(f). For 35 lb. pail.
Furnished with flexible follower plate (337665).
7531-4
Cart
Porta-Cart 6777-5 37
Part Number: 6777-5
Used with 7181 and 7149 series pumps. Speeds lubrication
service where machines are widely separated. Reduces
operator fatigue. Overall width: 18".
▲
! WARNING: For use with manually operated equipment only. See warning on page 38.
Part Coupling Thread Size Hose ID Max Work Pressure Hose Length
Number
317853-5 1/8" NPTF(m) x 3/8" NPTF(m) 1/4" 4,400 psi 5’
317854-5F 3/8" NPTF(m) x 3/8" NPTF(f) 3/8" 3,200 psi 5-1/2’
317854-10 3/8" NPTF(m) x 3/8" NPTF(f) 3/8" 3,200 psi 10’
Section 4 Manual Lubrication Pumps
Hose Assemblies for High Pressure Bucket Pumps
▲
! WARNING: For use with manually operated equipment only, see warning below.
38
▲
! WARNING:
The pressure rating on these hose assemblies apply when used with hand operated grease pumping
equipment ONLY, such as grease guns or bucket pumps. DO NOT use with power operated equipment.
Rupture of the hose can result in serious injury such as fluid injection into the flesh. For powered equipment
refer to adapters and swivel devices on pages 97 and 98 of this catalog, which can be used safely where
rapid pressure rises are encountered.
Section 4 Manual Lubrication Pumps
Volume Delivery Loader Pumps
For grease guns with Alemite loader fitting. Delivery: 1 lb. per
6 strokes. Includes (317219) loader extension and loader
fitting (B306740).
Part Number: 7537-4
For 35 lb. pail. Equipped with cover and flexible follower
(338825).
7538-4
Part Number: 7538-4
For 120 lb. drum. Equipped with cover and flexible follower
(338802).
Part Number: 7539-4
For 400 lb. drum. For mounting on full open drum, order
drum cover (318040-4) and follower (338923).
338802
F407
Loader Fittings
For grease guns with 1/8" NPTF(f) port in head, remove plug and install.
B322610
Loader Coupler
Part Number: 306741
For installation on loader pumps. Used in conjunction with loader fittings
(B306740) and (B322610). Thread: 3/8" NPTF(m).
306741
Section 4 Manual Lubrication Pumps
Dual Leverage Dispensers
For fluid gear lubricants. Attach directly onto original containers. 7533-4
Delivery: 1 pint per 6 strokes. Includes (317809-5F) 5-1/2' hose with
(306610) curved nozzle. Pump outlet: 1/2" NPTF(f).
Part Number: 7533-4 for 5 gallon pail. Pail cover included.
Part Number: 7534-4 for 16 gallon drum. Drum cover included.
Part Number: 7535-4 for 55 gallon drum. 2" NPTF(m) bung adapter
included.
Part Number: 8570-5 for 16 gallon drum. Includes drum cover and
(3631) meter, (306610) dispensing nozzle and dolly. Delivery 1 quart
per 20 strokes.
Part Number: 8571-5 for 16 gallon drum. Includes drum cover and
(3630) meter, (321203), (317860-1) and (B326302) dispensing nozzles
and dolly. Delivery 1 quart per 12 strokes.
Economy Dispenser
Part Number: 7117-1
For all fluid lubricants. Fits on 25 and 35 lb. pails. Delivery: 2.6 oz. per stroke.
All-steel construction. Unit includes 5' hose assembly with curved nozzle and a 7117-1
pail cover assembly.
40
F406
Diaphragm Transfer Pump
Part Number: 6797
Handles an extensive variety of petroleum products for industry, farm, or 6797
construction. Delivery: 20 gallons per 100 strokes. Self-venting. Adjustable
bung adapter allows adjustment of pump to any radial position. Made of
heavy duty cast aluminum. Built-in strainer and vacuum breaker. Fits 16 and
55 gallon containers.
Section 4 Manual Lubrication Pumps
Economy Hand Rotary Pump
Part Number: F401
Designed to work with a 30 or 55 gallon drum. Unit is furnished with a standard 2” bung.
Delivers 1 gallon per 15 strokes.
F401
F402
F403
41
F404
SETTING SWITCH
DRIVING MOTOR
INDICATION LIGHT
DRIVING SCREW
PRESS PLATE
42 PISTON
Ordering Information
Part Description
Number 43
1746-150 Easylube 150 Single Point Lubricator
1746-150X Easylube 150 Single Point Lubricator (10 Pack)
339588 Refillable Grease Cup PT 1/2” (M)
339589 Refill Grease Positioning Cover
339590 Refill Grease Nipple
339591 Adapter, 45 degree, 1/2” (F) x 1/8” (M)
339592 Adapter, Straight, 1/2” (F) x 1/8” (M)
339593 Adapter, 45 degree, 1/2” (F) x 1/4” (M)
339594 Adapter, Straight, 1/2” (F) x 1/4” (M)
339595 Adapter, 45 degree, 1/2” (F) x 3/8” (M)
339596 Adapter, Straight, 1/2” (F) x 3/8” (M)
339597 Remote mounting bracket for 8mm plastic tubing
339598 Remote mounting bracket for 1/4” metal tubing
339599 Adapter, 45 degree, 1/2” (F) x 8mm (M)
339600 Adapter, Straight, 1/2” (F) x 8mm (M)
339601 Adapter, 45 degree, 1/2” (F) x 10mm (M)
339602 Adapter, Straight, 1/2” (F) x 10mm (M)
339603 Battery Pack, Lithium, 6V
387386 5/8” Round Brush
387387 1-1/2” Round Brush
387388 2-1/4” Flat Brush
387390 Check Valve, 1/4” [f] x 1/4” [m]
387391 Oil Throttle
Section 5 Automatic Lubrication
Visi-Lube Automatic Lubricator
Part Number: B1741-A
Automatically controls grease flow. Refillable through
standard hydraulic grease fitting. Contains no chemicals or
gases. Allows grease level to be checked at a glance.
Sturdy one-piece steel base and core. Safety vents prevent
overfilling. Handles grease up to NLGI No. 3. Operating
temperature: -40°F to 150°F. Capacity is 2.2 cubic inches.
Threaded base 1/8" NPTF(m). Length: 3-1/4". Includes
three variable pressure springs. B1741-A
Model # Reservoir Flow Level Oil Air Solenoid Air Filter- Weight
Capacity Range Switch Heater Valve Regulator
Nominal
3922-A* 1 pint/ 0.3 to Optional na Optional Optional 5 lb/2.3 kg
0.4 liter 1.4 scfm
3922-AC 1 pint/ 0.3 to Optional na 120 VAC Yes 10 lb/4.5 kg
0.4 liter 1.4 scfm
3922-AD 1 pint/ 0.3 to Optional na 220 VAC Yes 10 lb/4.5 kg
0.4 liter 1.4 scfm
3922-B* 1 pint/ 0.3 to Yes na Optional Optional 5 lb/2.3 kg
0.4 liter 1.4 scfm
3922-BC 1 pint/ 0.3 to Yes na 120 VAC Yes 10 lb/4.5 kg
0.4 liter 1.4 scfm 45
3922-BD 1 pint/ 0.3 to Yes na 220 VAC Yes 10 lb/4.5 kg
0.4 liter 1.4 scfm
3942-BC 1 gallon/ 0.3 to Yes Optional 120 VAC Yes 20 lb/9.1 kg
4 liter 1.4 scfm
3942-BD 1 gallon/ 0.3 to Yes Optional 220 VAC Yes 20 lb/9.1 kg
4 liter 1.4 scfm
3942-CC 1 gallon/ 0.3 to Yes 120 VAC 120 VAC Yes 21 lb/9.5 kg
4 liter 1.4 scfm
3942-DD 1 gallon/ 0.3 to Yes 220 VAC 220 VAC Yes 21 lb/9.5 kg
4 liter 1.4 scfm
3943-BC 1 gallon/ 0.8 to Yes Optional 120 VAC Yes 20 lb/9.1 kg
4 liter 3.1 scfm
3943-BD 1 gallon/ 0.8 to Yes Optional 220 VAC Yes 20 lb/9.1 kg
4 liter 3.1 scfm
3943-CC 1 gallon/ 0.8 to Yes 120 VAC 120 VAC Yes 21 lb/9.5 kg
4 liter 3.1 scfm
3943-DD 1 gallon/ 0.8 to Yes 220 VAC 220 VAC Yes 21 lb/9.5 kg
4 liter 3.1 scfm
*Does not include mounting plate.
All units feature pressure relief valve and loader fitting. Interchangeable nozzles allow changing flow range in the field.
Bare pint units available for OEM applications. Modular design allows easy addition of options at a later date. Five
micron air filter element ensures only clean air reaches the lube points. Stainless steel suction strainer provides large
surface area for long service life.
Pint units are normally for indoor installations only. Maximum oil viscosity — ISO 100 (100cSt @ 40°C), 500 SUS @ 100°F.
Section 5 Automatic Lubrication
Accessories for Pint/Gallon Oil Mist Lubricators
Mounting Bracket Provides convenient method to mount bare pint units (3922-A, 3922-B).
387344
Air Filter-Regulator Removes water and particulates from incoming air supply, controls
387335 system pressure, 5 micron element, automatic drain, 1/4" (f)NPT ports
Max inlet pressure - 150 psi (10 bar)
Max outlet pressure - 60 psi (4 bar)
Air Solenoid Valve Shuts off air supply when machinery is not running
387449-1 (120 VAC) 1/4" (f)NPT ports, 1/2" (f)NPT conduit connection.
387449 (220 VAC) 16 VA holding current, 30 VA inrush current.
These versatile Oil Mist units permit the user maximum flexibility of
component selection. They provide a compact modular designed
package that contains all the components required to provide efficient
system performance.
(2) Mist Generating Head - available in three rated cfm delivery capacities:
2.3 cfm
4.3 cfm
9.7 cfm
The basic components can be selected and assembled in any combination
of capacities.
Section 5 Automatic Lubrication
Generator Models
Generator Generator Mist Oil Oil
115VAC 230VAC Generating Head Reservoir Reservoir
(Rated Air Flow) Size Number
These models include oil heater kit 383807 and low level switch 385810. They will properly lubricate any
system where the total cfm used by the system elements is within the mist flow range of cfm delivered by
the unit.
Condensing Fittings
These fittings condense the oil mist to liquid droplets for application to plain bearings, slides, ways, and other
sliding motion applications. Color: silver.
Spray Fittings
These fittings convert the oil mist to wet oil spray. Commonly used to apply oil to exposed surfaces requiring
fine distribution of oil film, such as open gears, chains, cams, rollers and eccentrics. Color: olive drab
1/4" NPTF(m) 1/2" PTF(m) Threaded End Threaded End No. of .067 CFM @ 20"
(both ends) (both ends) 1/2" NPTF(m) 3/4" NPTF(m) Holes H2O
SAE Special Short
383588-1 384280-1 326370-1 — 1 .3
383588-2 384280-2 326370-2 — 2 .6
383588-3 384280-3 326370-3 — 3 .9
383588-4 384280-4 326370-4 — 4 1.2
383588-5 384280-5 326370-5 — 5 1.6
383588-6 384280-6 326370-6 — 6 1.9
383588-7 384280-7 326370-7 — 7 2.2
— 384280-8 326370-8 — 8 2.5
— 384280-9 326370-9 — 9 2.8
— 384280-10 326370-10 383617-10 10 3.1
— — — 383617-11 11 3.4
— — — 383617-12 12 3.7
— — — 383617-13 13 4.0
50 — — — 383617-14 14 4.3
Manifolds
For connecting mist lines to closely grouped bearings. All blocks have 3/8" NPTF(f) connections at both
ends of block, and 1/8" NPSI(f) outlets on 1" centers, for lines to individual bearings. Two clamps with 11/32"
diameter holes, are included for mounting purposes. Blocks are made from 1-1/8" square aluminum. Use
3/8" NPTF(m) No. 41729 adapter to join two blocks together. Use 3/8" NPTF(m) No. 48925 to plug ends.
Alarm Annunciator
Part Number: 387275; 120 VAC, 50/60 Hz
Part Number: 387275-A; 220 VAC, 50/60 Hz
Volume Pump
Part Number: 7181-4
500 psi. Oval shaped container holds three gallons of oil. Pump delivers
approximately 3.6 cu. in. per stroke. Centered carrying handle gives
maximum balance and carrying ease. Durable maroon and white baked
enamel finish.
Sight Assembly
Part Number: 385662 w/bleed hole
Part Number: 385662-A1 w/o bleed hole
52
Assembly provides a check on bearing condition by permitting visual inspection of the condensed oil after it
passes through bearing housing. It includes a bleed hole to prevent oil from backing up into bearing cavity
and a convenient drain cock. Sight assembly is composed of sturdy transparent plastic. The unit is installed
in the drain hole commonly provided at the bottom of bearing housing. Connection is 1/2” NPT (M).
Now lubricating multiple machine lube points is simple! Users select the number of lubrication points, adjust
the timer to control lubrication frequency and the system does the rest.
Want flexibility? To reach more lube points, users simply add on more divider blocks with multiple outlets. The
system features a built-in controller with LED display. System monitors tank level and divider valve, insuring
each point is lubricated.
Alemite's Automated Grease System reduces downtime and improves reliability on all types of equipment.
Specifications
Pump, General Operating Pressure 1680 psi (120 bar)
Maximum Pressure 3500 psi (250 bar)
Operating Temperature -10°F to 160°F (-25°C to 70°C)
Output per Minute 0.08 oz. (0.147 cu.in.)
Reservoir Capacity 5.5 lbs. (2.5 kg.)
Divider Block No. of Outlets 6-12-18
Output per Outlet/Cycle .0025 oz. (.0046 cu. in.)
Power 120V AC or 24V DC
Section 5 Automatic Lubrication
Automatic Lubrication
Pump Only
Part Description Voltage
Number
55
4220 Grease System, Pump Only 115 VAC
4221 Grease System, Pump Only with Low Level Switch 115 VAC
4250 Grease System, Pump Only 24 VDC
4251 Grease System, Pump Only with Low Level Switch 24 VDC
Manual Systems*
Part Description
Number
4200 Grease System, Manual, 12 point Divider Block
4200-A Grease System, Manual, 12 point Divider Block includes Professional
Grease Gun and Mounting Bracket
*All systems include 1/8" fittings and nylon tubing to install system.
Accessories
Part Description
Number
339700 Progressive Divider Block, 6 points
339701 Progressive Divider Block, 12 points
339702 Progressive Divider Block, 18 points
339703 Push to connect fittings
339704 6mm Nylon Tubing
Section 6 Fluid Monitoring &
Inventory Management Systems
Accu-Guard
In today’s marketplace it is more important than ever to
ensure businesses are as efficient as possible.
Accurate dispensing makes monitoring a cost effective
solution. Companies wishing to improve their bulk
fluid installations and reduce their losses from unrecovered
deliveries will find the Accu-Guard systems reporting
capability comprehensive and easy to use. The
flexibility and quality of the Accu-guard system design Digital display
has made it an essential modern management tool
reducing waste, controlling costs and increasing profits. Keypad
Accu-Guard is a range of cost effective fluid management systems designed for the workshop environment.
It allows control, security and management of bulk petroleum products, while maintaining the flexibility that is
required in today’s changing workshop.
Operation
Accu-Guard operates via a number of uniquely intelligent keypad entry units controlling the fluid flow by opening
and closing solenoid valves installed at the outlet. A meter sending a digital signal back to the keypad for correlation
measures the volume dispensed. This digital signal is immediately relayed to a Master Controller, which takes the
signal and converts it into useable information. This information allows the system to maintain active, up-to-date
inventory levels as well as allowing the user to, at the touch of a button, extract numerous custom reports regarding
their inventory. The system accounts for virtually every drop of product dispensed through the system.
56
Accu-Guard PC
The Accu-Guard PC system is a computer based windows system. It provides versatility through control of
up to 20 different grades of fluids that can be dispensed to up to 594 outlets. 99 outlets can be dispensed
simultaneously. Accu-Guard PC can be used with the majority of oils, ATF and petroleum based hydraulic
fluids. The full alphanumeric keypad offers specified entry options, including job, registration, vehicle ID, or
fleet numbers. Numeric PIN entry, operator validation and warning printout on invalid use provides security
at each of the keypads. The keypad can hold up to 100 transactions preventing loss of information.
Preset-metering (accuracy +/- 1%) options allow easy, timely dispensing and inventory control. The system is
easily programmed to dispense in quarts or liters, while measuring bulk in gallons or liters. The Accu-Guard
system also controls tank quantities and reorder levels to provide accurate inventory management. The PC
version will even automatically send a fax to your fluid supplier to tell them your inventory is getting low!
System modifications are easily reconfigured on site by the end user. It operates on 110V power supply that
plugs into normal in-house outlets.
Accu-Guard II
The Accu-Guard II version has similar features as the PC version, without the need of a computer. 10
different products can be monitored through 594 outlets. The Accu-Guard II system can be easily upgraded
to the PC version at a reasonable cost.
Accu-Guard Compact
The Accu-Guard Compact offers the same reporting capability of the Accu-Guard II System. The Compact is a
Fluid Inventory Control System without the high cost. It can monitor up to 6 different products to 6 outlets from
the Master Controller. It requires no keypads and prints a receipt for every transaction. It features
pin-code security from the master controller and can be easily expanded for future keypad use.
Section 6 Fluid Monitoring &
Inventory Management Systems
ACCU-GUARD System Components 5) Pulse Meter - measures the quantity of fluid
dispensed with +/- 1% accuracy.
1) Master Controller - monitors and ensures the 6) Air Solenoid Valves - activate air pressure to the
security of the fluids dispensed within the system. pumps, allowing the system to be pressurized
Access is password protected. during dispensing only.
2) Keypad Controller - allows technician to enter 7) Fluid Solenoid Valves - allow the dispensing of
dispensing requests. The keypad uses entry of a fluid at a designated location. Alemite solenoids
PIN to maintain system integrity and security. are piloted for rapid response time and low
Each keypad operates independently of other electrical consumption.
keypads.
8) Pressure Relief Valve - protects the system’s
3) Printer - provides a hard copy of data within the components from an increase in pressure due to
Master Controller. thermal expansion and pressure spikes.
4) Digital Display - shows the amount of fluid being
dispensed in hundredths of a unit. The unit of Note: Warranty will be void if pressure relief valve is
measure is selected in the Master Controller. not used for each pump.
Pulse Meters
Part Number: 339316-1-Gallon
58 Part number: 339316-2-Liter
Part Number: 339316-3-Quart
Part Number: 339316-4-Pint
Measure the quantity of fluid dispensed with +/- 1% accuracy. One pulse meter per product.
Ready Light
Part Number: 339318.
Alerts operator when the fluid at their station is ready for dispensing. For 24 V D.C. operation. As needed.
Alemite leads the field with a wide range of air motor pumps for the most demanding lubrication and fluid
handling needs. With appropriate Alemite dispensers and fittings, these pumps deliver lubricants or other fluids
from buckets, drums and tanks to nearby work stations or throughout your operation.
Pumping Distance up to 4 ft. up to 50 ft. up to 75 ft. 75 ft. to 150 ft. up to 150 ft. over 150 ft. over 150 ft.
Number of Outlets 1 1 1-3 1-3 3+ 1-3 3+
Drum Size 35 Lbs. 9911 Series*@
120 Lbs. 9951 Series*@ 9950-A1* 9940** 7785-B5** or 7785-B5** 7786-C**
8550-A1* 8540-A1* 7786-C**
400 Lbs. 7216-A4^ 9979-A* 9979-A* 9949** 7785-A5** or 7785-A5** 7786-A5**
8559-B** 8559-B** 8549-B1** 7786-A5**
Bulk Tote Tank 9930 7730 7730 7730 7730
Tubing 5/8” OD 5/8” OD 5/8” OD 3/4” OD 1” OD 1” OD 1” OD
Recommendation 0.083” Wall 0.083” Wall 0.083” Wall 0.095” Wall 0.125” Wall 0.125” Wall 0.125” Wall
(hydraulic tubing)
Note: For pumping non-petroleum based products see page 83 or contact Alemite Tech Services (see page i) for a
suitable pump. Alemite recommends using hydraulic tubing for all installations.
▲
! WARNING:
DO NOT OPERATE PUMP AT HIGHER PRESSURE THAN LOWEST RATED PART OF SYSTEM. CAN
CAUSE SEVERE INJURY IF PUMP PRESSURES ARE GREATER THAN THE LOWEST RATED
COMPONENT IN THE DISTRIBUTION SYSTEM.
Section 7 Grease Pumps
Tote-A-Hose System with Heavy Duty Pump
Provides high-pressure lubrication. System may be piped to any part of the plant from one centrally-located
lubricant area. Eliminates need for lubricant substations and duplicated equipment. May be placed adjacent
to one or several machines since hose assembly permits wide working arc. Control valve supplies a single
measured shot or a continuous flow of lubricant.
System consists of air-operated lubricant pump, lubricant pipe line, snap-on coupler stations and Tote-A-Hose
control valve assembly. The assembly is carried from station to station.
Typical Installations
Item Part No. Qty. Description
1 6320-3 1 Control Valve
2 B52752 1 Z-Type Swivel
3 317875-XX 1 High Pressure 1/4" I.D. Hose XX Length*
4 B52751 1 90° Swivel
5 42802 1 Coupling
6 1823-1 1 Giant Buttonhead Fitting
7 320290 1 Tote-A-Hose Outlet Assembly
6
5
61
1
Section 7 Grease Pumps
Typical Installations
Part Number 387769 Standard Duty Pump with Heavy Duty Reel — 120 lb. Drum
Includes Items 1-17 below (except 7 & 10— these have to be furnished by the equipment installer)
Item Part No. Qty. Description
1 8550-A1 1 50:1 Ratio Pump & Cover
2 338802 * Follower
3 317882-7 1 Hose
4 1001-86 1 Union
5 380372-B1 1 Lube Strainer
6 308785 2 Shut-off Valve
7 NPN ** Lubricant Piping
8 8078-B 1 50 ft. Reel Assy
9 6320-3 1 Control Valve
10 NPN ** Air Piping
11 338860 1 Filter/Regulator package@
12 317803-3 1 Hose
13 B328030 * Air Coupler
14 B328034 * Air Adapter
15 51888 1 Male Adapter
16 SWA274 1 1/2” Ball Valve
17 130552 1 Male/Male Adapter
*Included with 8550-A1. **NPN — furnished by equipment installer.
@To be used if wall mounting filter/regulator. Use 7936 mini filter regulator
& gauge, instead of 338860, if mounting directly to pump.
Part Number 387770 Ram Pump with Heavy Duty Reel — 120 lb. Drum
Includes Items 1-17 below (except 7 & 10— these have to be furnished by the equipment installer)
Item Part No. Qty. Description
1 9950-A 1 50:1 Ratio Pump & Cover
2 338801 * Follower
3 317882-7 1 Hose
4 1001-86 1 Union
62 5
6
380372-B1 1
308785 2
Lube Strainer
Shut-off Valve
7 NPN ** Lubricant Piping
8 8078-B 1 50 ft. Reel Assy
9 6320-3 1 Control Valve
10 NPN ** Air Piping
11 338860 1 Filter/Regulator package@
12 317803-3 1 Hose
13 328030 1 Air Coupler
14 328034 1 Air Adapter
15 51888 1 Male Adapter
16 SWA274 1 1/2” Ball Valve
17 130552 1 Male/Male Adapter
*Included with 9950-A. **NPN — furnished by equipment installer.
@To be used if wall mounting filter/regulator. Use 7936 mini filter regulator & gauge,
instead of 338860, if mounting directly to pump.
Part Number 387771 Heavy Duty Pump with Heavy Duty Reel — 400 lb. Drum
Includes Items 1-17 below (except 7 & 10— these have to be furnished by the equipment installer)
Item Part No. Qty. Description
1 7785-A5 1 40:1 Pump
323847-4 1 Cover
2 338912 1 Follower
3 317882-7 1 Lube Hose
4 1001-86 1 Union
5 380372-B1 1 Lube Strainer
6 308785 2 Shut-off Valve
7 NPN ** Lubricant Piping
8 8078-B 1 50 ft. Reel Assy
9 6320-3 1 Control Valve
10 NPN ** Air Piping
11 338862 1 Filter/Regulator package
12 317803-3 1 Hose
13 328031 * Air Coupler
14 328037 * Air Adapter
15 51888 1 Male Adapter
16 SWA274 1 1/2” Ball Valve
17 130552 1 Male/Male Adapter
*Included with 7785-A5. **NPN — furnished by equipment installer.
Use 7936 mini filter regulator & gauge, instead of 338862, if mounting directly to pump.
Section 7 Grease Pumps
Standard Duty Stationary Pumps — Medium and High Pressure
8540-A1 8550-A1
Part Drum Pump Approx. Air Mat’l Follower@ Cover Union Ship
Number Size Ratio Del/Min# Hose Hose Wt.
9940 120 lbs. 70:1 3.25 lbs. 317803-3 317876-5 338802 338371 321155 28 lbs.
9949 400 lbs. 70:1 3.25 lbs. 317803-3 317876-5 338911 338163 321155 32 lbs. 65
9950-1 120 lbs. 50:1 4.50 lbs. 317803-3 317876-5 338802 338371 321155 19 lbs.
9950-A1 120 lbs. 50:1 4.50 lbs. 317803-3 317876-5 338802 338371 321155 32 lbs.
9979 400 lbs. 50:1 4.50 lbs. 317803-3 317876-5 338911 338163 321155 25 lbs.
9979-A 400 lbs. 50:1 4.50 lbs. 317803-3 317876-5 338911 338163 321155 49 lbs.
# Double acting delivery. Free delivery NLGI # 2 at 77° F, 150 psi air pressure.
Section 7 Grease Pumps
Heavy Duty Stationary Pumps — Medium and High Pressure
These pumps are built for continuous operation. They are recommended for longer piped installations.
These double-acting pumps will provide consistent, reliable delivery of hard to pump lubricants up to NLGI
#3, direct from original drums or bulk containers. An air connector and quick detach air coupler are included
with all models. All models have a 4-1/4" air motor except 7795-A5 and 7795-B5 which have 6" air motors.
Air inlet and material outlet are 1/2" female pipe thread. Air outlet is 3/4" female pipe thread.
7785-A5 7786-A5
66
Part Drum Pump Approx. Air Mat’l Follower@ Cover Union Bung Muffler Ship
Number Size Ratio Del/Min Hose Hose Adapter Wt.
7784-A4 400 lbs. 25:1 32 lbs.# 317811-5 317882-7 338912 323847-4 321155 326750-B1 324170 76 lbs.
7785-A5 400 lbs. 40:1 22 lbs.# 317811-5 317882-7 338912 323847-4 321155 326750-B1 324170 77 lbs.
7785-B5 120 lbs. 40:1 22 lbs.# 317811-5 317882-7 338804 323800-4 321155 326750-B1 324170 72 lbs.
7786-A5 400 lbs. 75:1 12 lbs.* 317811-5 317882-7 338912 323847-4 321155 326750-B1 324170 75 lbs.
7786-C 120 lbs. 75:1 12 lbs.* 317811-5 317882-7 338804 323800-4 321155 326750-B1 324170 75 lbs.
7795-A5 400 lbs. 80:1 13 lbs.* 317811-5 317882-7 338912 323847-4 321155 326750-B1 324170 90 lbs.
7795-B5 120 lbs. 80:1 13 lbs.* 317811-5 317882-7 338804 323800-4 321155 326750-B1 324170 84 lbs.
Part Application Type Drum Pump Air Mat’l Approx. Air Mat’l Ship
Number Size Ratio Inlet Inlet/ Del/Min Hose Hose Wt.
Outlet
7216-A4 Bulk grease Piston 55 gal 1:1 1/4" 1-1/2" x 1" 33 lbs. 317803-3 317899-4 18 lbs.
transfer NLGI 1
7216-A4 318040-4
Section 7 Grease Pumps
Standard Duty Portable Pump — High Pressure
This air powered mobile unit delivers 23 ounces of NLGI #2 grease per minute
at 70° F with 150 psi air pressure. Unit includes Alemite exclusive Pressurtrol. 8541-5
A built-in gun holder keeps the hose and control valve off floor. Model includes
cover mounted pump, follower, 7' delivery hose, Z-swivel, control handle, and
rugged steel dolly. Air motor is 3" diameter. Air inlet is 1/4" female pipe thread
(connector and quick detach coupler included). Material outlet is 3/8" female.
Drum not included.
Part Drum Pump Approx. Mat’l Follower Z-Swivel Control Dolly Cover Ship
Number Size Ratio Del/Min# Hose Handle Wt.
8541-5 120# 70:1 1.5 lbs. 317875-7 338802@ B52752 6320-3 316315-5 338371 45 lbs.
Part Drum Pump Approx. Adapter Mat’l Follower@ Z-Swivel Control Cover Dolly Ship
Number Size Ratio Del/Min# Hose Handle Wt.
9911-1+ 35 lbs. 50:1 4.5 lbs. —— —— —— —— —— —— —— 15 lbs.
9911-A1 See Note 50:1 4.5 lbs. 44734 317875-7 ▲ B52752 6320-3 323496-A4 393629 68 lbs.
9911-B1 See Note 50:1 4.5 lbs. 44734 317875-7 ▲ B52752 6320-3 323496-A4 —— 48 lbs.
9911-C1^ 35 lbs. 50:1 4.5 lbs. —— —— 337665 —— —— 338166 —— 22 lbs.
9911-H1** 35 lbs. 50:1 4.5 lbs. 44734 317875-7 337665 B52752 6320-3 338166 —— 29 lbs.
9911-R1* —— 50:1 4.5 lbs. —— —— —— —— —— —— —— 17 lbs.
9911-Z1 35 lbs. 50:1 4.5 lbs. 44734 317875-7 337665 B52752 6320-3 338166 338958 50 lbs.
9911-HA1** 12.5 kg. 50:1 2.04 kg. 326750-F1 317875-7 338991 B52752 6320-3 338981 338958 31 lbs.
9911-HB1 20 kg. 50:1 2.04 kg. 326750-F1 317875-7 338992 B52752 6320-3 338982 338958 37 lbs. 69
9911-HC1 50 kg. 50:1 2.04 kg. 326750-F1 317875-7 338993 B52752 6320-3 338983 338958 42 lbs.
Part Drum Pump Approx. Adapter Mat’l Follower@ Z-Swivel Control Dolly Cover Ship
Number Size Ratio Del/Min# Hose Valve Wt.
9941 120 lbs. 70:1 3.25 lbs. 44734 317875-7 338802 B52752 6320-3 316315-5 338371 54 lbs.
9951-1 120 lbs. 50:1 4.5 lbs. 44734 317875-7 338802 B52752 6320-3 316315-5 338371 50 lbs.
9951-T1 120 lbs. 50:1 4.5 lbs. 44734 317875-7 338802 B52752 6320-3 338958 338371 57 lbs.
9951-S1 120 lbs. 50:1 4.5 lbs. 44734 317875-7 338802 B52752 6320-3 —— 338371 37 lbs
#Double acting delivery. Free delivery NLGI # 2 at 77° F, 150 psi pump operating air pressure.
@Follower is flexible — works with straight or tapered drum.
Section 7 Grease Pumps
Electric Pump — Rockcrusher
Part Number 7175-R4
• Extra heavy duty, 40 lb. capacity
• Pressure switch shuts off motor at 5,000 psi
7175-R4
• Delivers 14 oz. NLGI #1 grease/minute at 70° F
through 10' hose assembly
• Powered by 115V AC, 50/60 cycle 3/4 HP motor
with 25' three-wire electric cord
• Helix arm assembly provides positive feed for
thick lubricants at low temperatures
• Includes 10' hose, Z-swivel and control valve
70
Section 8 Oil Pumps
Medium Pressure (Oil) Pump Selection Guide
These air-operated pumps are used to deliver motor oils, gear oils,
hydraulic oils and automatic transmission fluid from original refinery
drums or tanks. They are ideal for local or remote installations where
oil is piped to multiple hose outlets and/or reels, metered outlets or
portable service stations.
7783-A4
These rugged weatherproof units are available in Standard Duty,
RAM, and Heavy Duty to meet any pumping requirement. Models for
use on 16 gal. drums mount to drum covers. The 55 gal. drum models 8568-A4
are available with bung adapters, which screw directly into 2" bung 9968
holes on drums and covers. Stub pumps are available for use in
standard size and bulk tanks equipped with 2" bung opening.
Select the pump that best suits your needs from the following descriptions and delivery data. For features of
RAM, Standard and Heavy Duty, see page 59.
The chart below lists general medium pressure pump selection guidelines. Each application varies and
should be carefully considered for special conditions that may require a pump selection other than the standard
recommendations listed. These conditions can include viscosity of product pumped, ambient temperature
conditions, simultaneous operation of several dispensing outlets, or dispensing volume requirements. When
measuring total pumping distance, the hose length of dispensing reels should be included in total distance.
Pumping Distance up to 10 ft. up to 25 ft. up to 75 ft. 75 ft. to 200 ft. up to 200 ft. over 200 ft. over 300 ft.
Number of Outlets 1 1 1-2 1-3 3+ 1-3 3+
16 gallon 9960-A 9960-A
71
55 gallon 7216-4@ 9918-A 9918-A* or 9969-B* or 7783-A4 9970* or 7793-A1
9969-B^ 9970^ 7783-A4^
Bulk Container 9916-A+ 9918-A* or 9968* or 7783-C4 7783-C4^ 7793-C
9968^ 9970^
8568-A4
Tubing 5/8” OD 5/8” OD 5/8” OD 5/8” OD 1” OD 1” OD 1” OD
Recommendation 0.035” Wall 0.035” Wall 0.035” Wall 0.035” Wall 0.049” Wall 0.049” Wall 0.049” Wall
(hydraulic tubing)
▲
! WARNING:
Do not operate pump at higher pressure than lowest rated part of system. Can cause severe injury if pump
pressures are greater than the lowest rated component in the distribution system.
Section 8 Oil Pumps
Medium Pressure Oil Pump & Reel Systems — Typical Installations
Lubricant is piped from one centrally located lubricant depot to anywhere on site where one or more retractable hose reel
units can be connected to the system. Ideal for high-volume lubrication or dispensing at several locations. System consists
of a medium pressure, air-operated lubricant pump, lubricant pump line and one or more hose reel with control valve.
8568-A4
* Appropriate downtube should be ordered, see page 75. Pump includes a 2” bung adapter for drum or tank
mounting. Will also mount to 1-1/2” suction pip from remote tank.
**Bung adapter 326750 required to mount pump to cover.
#The 331571 series is designed for dispensing of extremely thick fluids (up to 4,000 cps). These medium
pressure pumps are designed to deliver light to medium viscosity non-fibrous lubricants, rust-proofing 73
compounds and semi-solid fluids. All of these products are delivered directly from their original containers.
Part Drum Pump Approx. Material Material Bung Cover Air Muffler Ship
Number Size Ratio Del/min# Inlet Outlet Adapter inlet/outlet Wt.
7783-A4 55 gal. 6:1 10 gpm —— 1/2" NPTF(f) 326750-B1 323847-4 3/4" NPTF(f) 324170 55 lbs.
7783-B4 16 gal. 6:1 10 gpm —— 1/2" NPTF(f) 326750-B1 323800-4 3/4" NPTF(f) 324170 50 lbs.
7783-C4 Stub* 6:1 10 gpm 1-1/2" NPTF(f) 1/2" NPTF(f) 326750-B1 —— 3/4" NPTF(f) 324170 45 lbs.
7793-A1 55 gal. 12:1 6.5 gpm —— 1/2" NPTF(f) 326750-B1 323847-4 3/4" NPTF(f) 324170 75 lbs.
7793-C Stub* 12:1 6.5 gpm 1-1/2" NPTF(f) 1/2" NPTF(f) 326750-B1 —— 3/4" NPTF(f) 324170 65 lbs.
Pump Part 16 Gal. Ext. 55 Gal. Ext. 250 Gal. Ext. 275 Gal. Ext.
Number For 321206 For 321206 For 321206 For 321206
Cutoff* Cutoff* Cutoff* Cutoff*
7202 338362-3** 338362-4** 338362-4** 388362-5**
7222-B4 338246-10 338246-3 338246-1 338246-4
7780-C1 338362-3** 338362-4** 338362-4** 338362-5**
75
7783-C4 338246-11 338246-1 338246-1 338246-8
7793-C 338246-11 338246-1 338246-1 338246-8
8568-A4 338246-10 338246-3 338246-1 338246-4
9916-A 338246-3 338246-4 338246-8 338246-5
9918-A 338246-3 338246-4 338246-8 338246-5
9968 338246-1 338246-2 338246-3 338246-6
9970 338362-3** 338362-4** 338362-4** 338362-5**
*321206 low-level cutoff should be purchased separately
**Includes 328207 bushing for attaching a low-level cutoff. These tubes are made of 1" wrought steel pipe.
Part Drum Pump Approx. Mat’l Cover Meter Control Dolly Ship
Number Size Ratio Del/min Hose Handle Wt.
9961-1 16 gal. 5:1 4 gal. 317856-5F 338145 3631 7492 316315-5 40 lbs.
Section 8 Oil Pumps
Low Pressure Transfer Pumps — for Special Applications
These low pressure pumps are designed for both high volume transfer and dispensing a variety of low viscosity
fluids. The recommended application of each pump is listed in the chart below. The model 9920 RAM and the
diaphragm type pumps will pump abrasive fluids such as used oil. The model 8301 is made of polypropylene for
compatibility with coolants and windshield washer fluid. Equipped with air connector and quick detach coupler.
8301
9920
6799 7216-4
8302
8304-1
Part Application Type Drum Pump Air Mat’l Approx. Air Mat’l Ship
76 Number Size Ratio Inlet Inlet/ Del/min** Hose Hose Wt.
Outlet
6799 Diesel fuel, Piston 55 gal. 1/4:1 1/4" 1" 30 gal. 317803-3 See Note 22 lbs.
light oil
7216-4 Light oils Piston 55 gal. 1:1 1/4" 1-1/2"X 1" 14 gal. 317803-3 317898-5 14 lbs.
7216-B@ Light oils Piston 55 gal. 2:1 1/4" 1" X 3/8" 7 gal. 317803-3 317828-5 18 lbs.
7222-B4 Light oils Piston Stub† 1:1 1/4" 1-1/2" X 1" 14 gal. 317803-3 317898-5 12 lbs.
7880-C1# Coolant, wind, Piston Stub† 2.5:1 1/4" 1" X 3/8" 4 gal. 317803-3 317828-5 14 lbs.
washer fluid
8301* Coolant, wind, Diaphragm —- 1:1 1/4" 1/2" 14 gal. 317803-3 316856-5F 8 lbs.
washer fluid
8302 Used oil, Diaphragm —- 1:1 1/4" 3/4" 16 gal. 317803-3 317898-5 20 lbs.
Lt. wt. oil
8303 Used oil, Diaphragm —- 1:1 3/8" 1" 33.5 gal. 317803-3 317898-5 29 lbs.
Med wt. oil
8304-1 Med-heavy Diaphragm —- 1:1 1/2" 1-1/2" 109 gal. 317811-3 —- 39 lbs
wt. oil
9920 Used oil RAM —- 1:1 1/4" 1" 20 gal. 317803-3 317898-5 18 lbs.
@ Includes low level cutoff.
# Stainless Steel pump tube with Teflon™ packing.
* Dual intake manifold kit 338775 can be added to 8301 to provide 50/50 mix of two fluids. Suction Hose and
strainer 338777 can be used for fluid pick-up. Hose is 1/2" NPTF(m) X 3/4" NPTF(m). Hose is 6 feet long
and includes 338665 strainer.
†Appropriate downtube can be added, see downtube selection chart on page 75.
**Approximate delivery per minute free flow.
Note: For maximum safety a static grounded hose (not furnished) must be used when transferring
combustible fluids.
Section 9 Used Oil Handling Equipment
Used Oil Pumps
These medium pressure pumps make used oil evacuation and transfer safe and simple. They are high
volume pumps that will transfer used oil to storage tanks quickly. They are designed to handle the abrasive
materials that can be contained in used oil. Equipped with air connector and quick detach air coupler.
9920
8302
8303
Drain Adapter
Supports bowl and opens valve, draining used oil into drum from
bowl of 7682-4 drain.
78
320310
Part Thread
Number Size
320310 2"
320320 1-1/4"
320320
Rolling Used Oil Drains
Part Number: 7140
Designed specifically for vehicle lubrication operations where ease of
use and durability are essential. Capacity: 48 gallons. Constructed
of welded, 11 gauge steel. Rolls on 2" channel track (not included).
3" dia. wheels adjust to fit service pit width from 36.5" to 42".
Includes 2" ball valve. Dimensions: 32.62" W x 32.62" L x 12" H.
Painted safety yellow. 7140
Evacuation Valve
Part Number: 338556
This dual valve provides simultaneous control of the air line to the oil
evacuation pump and the suction line from the pump with one valve 338556
handle. The inlet and outlet of both valves is 1/2" NPTF(f) pipe thread.
Suction Tube 79
Part Number: 338558
Used to evacuate rolling pit drains. Tube includes a connector for
attaching to the 338814-15 evacuation hose used with the 338557
suction wand kit. A built-in strainer prevents large particles from
entering the evacuation pump.
338558
Strainers
Strainers connect to pipe or hose to prevent foreign material from
entering pump.
Part Size
Number
338577 1/2" NPT (f) 338577
338685 3/4" NPT (f)
339683 1" NPT (f)
Section 9 Used Oil Handling Equipment
Suction Wand Kit
Part number: 338557
Includes a 15' evacuation hose with a quick-disconnect coupling, four 15" flexible wands, and a wand storage
bracket. Evacuation hose has a 1/2" NPTF(m) pipe thread end for connecting to the 338556 evacuation
valve.
See page 79 for the evacuation valve and page 81 which shows a typical installation.
Suction Hose
Part Coupling Size Hose Hose Max. Working Min. Burst Available
No. & Thread ID Construction Pressure psi Pressure psi Lengths in
Feet
338814 3/8" NPTF(m) x 1/2" NPTF(m) 1/2" PVC w/wire 50 200 10, 15
317849 3/4" NPTF(m) x 3/4" NPTF(m) 3/4" PVC w/wire 50 200 1F*, 6, 15, 18
317898 3/4" NPTF(m) x 1" NPTF(m) 3/4" 4 spiral rayon 200 1,200 5
80 Code: *1F hose is 1-1/2' long
Section 9 Used Oil Handling Equipment
Used Oil Systems — Typical Installations
1 SWA267 275 Gallon Tank 11 SWA274 Ball Valve
2 1000-44 Adapter Union 1/4" (m) x 1/4" (f) 12 338552 Bushing 2" (m) x 3/4" (m)
3 317803-7 Air Hose 13 5604-2 Moisture Separator
4 338787 Tank Sentry 14 B334547-1 Auto Dump Mech
5 9920 Evacuation Pump 15 1000-1616 Adapter Union 1" (m) x 1" (f)
6 338554 Hose, ball valve, coupler Kit 16 338556 Evacuation Valve
7 8586 Portable Drain 17 338557 Suction Wand Kit
8 7604-B Air Reg w/ gauge 1/4" 18 317898-5 Hose
9 327033 Adapter 1/4" (m) x 1/4" (m) 19 1000-1612 Adapter 1" (m) x 3/4" (f)
10 51891 Bushing 1/2" (m) x 1/4" (f)
81
82
Section 10 Material & Heavy Duty Pumps
Alemite Material & Heavy Duty Pumping Systems
Alemite’s Material & Heavy Duty Pumps have proven themselves
time after time with impressive savings produced by the efficient
handling of pumpable materials. These products are designed to
provide the capabilities and versatility needed to construct systems
meeting all the individual requirements of various applications.
Materials are pumped from their original containers or bulk storage
tanks, transferred to the point of application and then sprayed,
dispensed or extruded.
Spray Application
Materials may be sprayed, using air-atomizing or airless spray
systems. Applications include the spraying of adhesives, roof
coatings and hundreds of similar applications.
Dispense Application
Dispensing involves the transfer of fluid, semi-fluid or other
pumpable materials from their original containers or bulk storage to
the point of application. Dispensing and transferring pumps are
available to handle very light liquids, heavy sealers, inks and other
similar products.
Extrude Application
Extruding is the application of heavy materials in a usable form, such as ribbons or beads. Extruding systems
can handle caulks, sealers and varied chemical, food and pharmaceutical materials. 83
84
Material Classification
Light Fluids
(Viscosity 5 to 400 cps) Medium Fluids Medium Fluids
(Viscosity 200 to 4000 cps) (Viscosity 3000 to 30,000 cps)
Acids
Adhesives Adhesives Adhesives, latex
Cosmetics, fluid Batters, bakery Ceiling coating, accoustical
CLASS Dextrose, liquid CLASS Drugs, fluid CLASS Doughs
Food flavorings Flavorings, ice cream Food flavorings
I Inks, liquid
Lubricating oils (SAE 10 to SAE 40)
Mineral oils
Resins, synthetic
Shortenings, liquid
II Food fillings
Purees
Sealers
Syrups
III Inks
Jams & Jellies
Sealers
Sound deadeners
Trough grease Syrups
Solvents
Vegetable oils (edible & non-edible)
Buffing compounds
Dough, heavy bakery
CLASS Drugs, semi-fluid CLASS Caulk, gun grade CLASS Cements, plastic
Food products Glues, dehydrated Caulk, trowel grade
IV Inks, heavy
Resins, synthetic
Shortening, vegetable paste
Sound deadeners
V Putty, light
Sealers, heavy
VI Caulk, tape
Sealers, trowel grade
Note: This information is for quick-reference only. There may be additional information required to correctly
recommend a unit and/or system. For additional assistance, contact Alemite Technical Services at
1-800-628-9069 or 1-704-542-6900.
Section 10 Material & Heavy Duty Pumps
Material & Heavy Duty Pump Selection Guide
The chart below is intended to assist with selecting the correct pump given the application. As there are a
number of suitable pumps available, the Specification Chart (Page 86) will help determine which pump is
the most suitable. Each application varies and should be carefully considered for special conditions that may
require a pump selection other than the standard recommendations listed. These conditions can include
viscosity of product pumped, ambient temperature conditions, simultaneous operation of several dispensing
outlets, or dispensing volume requirements.
7886-B Class II, III & IV Carbon Steel Buna 11:1 16 gal./ 7.75 13 30
Materials 120 lbs.
7886-S5 Class II, III & IV Stainless Steel Teflon 11:1 55 gal./ 7.75 13 30
Corrosive Materials 400 lbs.
86
7896-A5 Class III & IV Carbon Steel Buna 22:1 55 gal./ 4 7 30
Materials 400 lbs.
7893-A Class V & VI Carbon Steel Polyurethane 48:1 400 lbs. 12 (lbs./min.) 20 (lbs./min.) 40
& Buna “N”
▲
! WARNING: Always consult a MATERIAL COMPATIBILTY CHART to ensure that material and the
cleaning product for the pump are compatible with pump material as well as hose material.
Section 10 Material & Heavy Duty Pumps
Drum Covers
See page 109 for Drum Cover information.
Section 11 Reels and Hoses
Alemite Hose Reels Air/Water 8078-E
Extend your delivery reach.....conveniently and efficiently. Alemite manufactures
a range of reels to meet your specific application.
Alemite reels, carrying high, medium and low pressure hoses, put lubricants and
fluids in easy reach when and where you need them. Mounted overhead, on wall,
floor or tank, they conveniently and safely store hoses out of the way between tasks.
Alemite Reels are highly engineered to perform better, last longer and to be safer
to maintain and operate. Three types of reels are available to suit any application:
Heavy Duty Reels, Severe Duty Reels, and Double Post Reels. For convenience
Reel Packages, which include hoses and accessories, have been assembled
under one part number. If required these parts can be ordered separately.
SWIVEL & REEL BALL BEARINGS Reduces torque load on power spring for smooth retraction and durability.
Sealed bearings designed to eliminate contamination and minimize maintenance.
POWER SPRING CASSETTE Factory-lubricated one-piece cassette design makes installation safer and
servicing easier.
METAL ARBOR Durable metal design withstands extreme stress, eliminating breakage associated with
89
non-metal arbors.
5-POSITION GUIDE ARM Provides versatile floor, wall and ceiling mounting and allows hose to release at
optimum position.
8078-E
91
Low Pressure (Air/Water) Reels
Shielded Reels have all the features of Heavy Duty Reels, except
the guide arm is fixed in one position.
Low 8079-E 7336-D 317803-30 3/8” 317811-2 Hose Stop 337437 7331 300 psi 68 lbs.
Pressure Union 1000-88
Outlet Bushing 131586
Air Coupler 328030
Air Adapter 328034
Low 8079-F 7336-D 317803-50 3/8” 317811-2 Hose Stop 337437 7331 300 psi 70 lbs.
Pressure Union 1000-88
Outlet Bushing 131586
Air Adapter 328034
Air Coupler 328030
*Last two digits of part number indicate hose length.
**Cabinet 7331 is not part of the reel package. Order the following:
7331 Cabinet (1 per reel).
339371 End Panels (1 per bank of reels).
339368 Strut (for single reel installation).
Section 11 Reels and Hoses
Welding Reels
Welding Reels are designed to perform better, last longer and be safer to maintain and operate. These reels
are easily mounted to wall, ceiling, truck bed, floor or workbench. Welding Reels feature: an anti-lockout ratchet,
one-piece spring cassette, ball bearings and a metal arbor. They are designed for smooth and durable operation.
Bold indicates that it is included with the Part Number.
Description Part Bare Delivery Hose Hose Max Ship
Number Reel Hose* Stop ID Pressure Wt.
Heavy Duty 8071-A 7338-B 339539-30 339538 1/4” 200 psi 54 lbs.
Heavy Duty 8071-B 7338-B 339539-50 339538 1/4” 200 psi 56 lbs.
Severe Duty 8071-D 7338-C 339539-50 339538 1/4” 200 psi 57 lbs.
*Last two digits of part number indicate hose length.
Hoses
How to select a hose assembly
Several factors should be considered when selecting a hose: end fitting size
and thread, inside diameter, hose length, construction, and most importantly—
working and burst pressure. Selecting a hose of the proper pressure rating is
critical when using hoses with air powered equipment where rapid pressure
rises can occur. 7338-B
Select the proper hose model from the chart below based on the factors listed above and 93
add the length suffix from the available lengths. For example: From the High Pressure Coupled Grease
Hoses table a 3/8" ID hose with 3/8" male pipe thread fittings on both ends and a burst pressure of 16,000
psi for use as a connecting hose with a 50:1 ratio pump is model 317882-7 (for a seven ft. hose).
▲
! WARNING:
DO NOT OPERATE PUMP AT HIGHER PRESSURE THAN LOWEST RATED PART OF SYSTEM. CAN
CAUSE SEVERE INJURY IF PUMP PRESSURES ARE GREATER THAN THE LOWEST RATED
COMPONENT IN THE DISTRIBUTION SYSTEM.
Fuel Hoses
Part Coupling Hose Hose Max Work Min Burst Available
Number Size & Thread ID Const. Pressure PSI Pressure PSI Lengths in Feet
317868 3/4" NPTF (m) x 3/4" NPTF (m) 3/4" 1 wire 1,250 5,000 2, 30, 50, 70
94 317869 1" NPTF (m) x 1" NPTF (m) 1" 1 wire 1,000 4,000 50
339634 1" NPTF (m) x 1" NPTF (m) 1" 4 textile spiral 150 600 50
Part Coupling Hose Hose Max Work Min Burst Length in Feet
Number Size & Thread ID Const. Pressure PSI Pressure PSI
3534-B1 1/4" NPTF (m) x 1/4" NPTF (m) 1/4" Nylon 180 720 25
Section 11 Reels and Hoses
Suction Hose
Part Coupling Hose Hose Max Work Min Burst Available
Number Size & Thread ID Const. Pressure PSI Pressure PSI Lengths in Feet
338814 3/8" NPTF(m) x 1/2" NPTF(m) 1/2" PVC w/wire 50 200 10, 15
317849 3/4" NPTF(m) x 3/4" NPTF(m) 3/4" PVC w/wire 50 200 1F*, 6, 15, 18
317898 3/4" NPTF(m) x 1"NPTF(m) 3/4" 4 spiral rayon 300 1,200 5
*1F hose is 1-1/2' long.
Welding Hoses
Part Coupling Hose Max Work Available
Number Size & Thread ID Pressure PSI Lengths in Feet
339539 9/16-18 (f) 1/4" Twin 200 30, 50
▲
! WARNING:
The pressure rating on these hose assemblies apply when used with hand operated grease pumping
equipment ONLY, such as grease guns or bucket pumps. DO NOT use with power operated equipment.
Rupture of the hose can result in serious injury such as fluid injection into the flesh. For powered equipment
refer to adapters and swivel devices on pages 97 and 98 of this catalog, which can be used safely where
95
rapid pressure rises are encountered.
6617-G
Section 12 Meters and Control Valves
Grease Control Valves
Bold indicates that it is included with the Part Number.
Part Number
Thread (m) x (m) Straight 90 ° Z-type psi Rating
1/4" NPTF x 1/2"-27* B52750# B52751# B52752# 10,000
1/8" NPTF x 1/8" NPTF 54730 —— 54732 10,000
1/4" NPTF x 1/4" NPTF B321320# —— B331107# 10,000
1/2" NPTF x 1/2" NPTF 332912 —— —— 7,000
*NS taper
#Indicates blister pack. Quantity 1 per pack.
▲
! WARNING: 97
DO NOT OPERATE PUMP AT HIGHER PRESSURE THAN LOWEST RATED PART OF SYSTEM. CAN
CAUSE SEVERE INJURY IF PUMP PRESSURES ARE GREATER THAN THE LOWEST RATED
COMPONENT IN THE DISTRIBUTION SYSTEM.
Swivel Adapter
Part Number: B6278 B6278
Consists of swivel hydraulic coupler 6509-D, locking sleeve, and
extension. Length: 8". Packaged in a blister pack.
Section 12 Meters and Control Valves
Flexible Extension Adapter
Part Number: 6248-1
Consists of locking sleeve, wire braid hose/metal guard
assembly, and hydraulic coupler B330070. Max working
pressure: 3,000 psi. Length: 11-1/2". 6248-1
B6783
Rigid/Flexible Extension
Part Number: 6778
Can be bent around obstructions or made rigid for one hand
lubrication. Meets safety requirements for use with air-operated
lubrication equipment. Hose max working pressure: 5,000 psi.
Overall length: 13-1/2". 1/8" NPTF(m) for use with all high
pressure control valves.
6778
100
7492 7498 7498-A
7836-C1
101
This series of mechanical meters are designed for rugged applications.
Meters have easy-to-read 3-1/4" diameter dials that are color-coded for
quick identification. Safety latch must be depressed before fluid can be
dispensed. Trigger can be locked in open position for dispensing large
volumes. All valves include swivel and inlet strainer. Maximum operating
pressure: 1,000 psi.
3682-A
3684
Dispensing Valves
Fluid Dispensing Valve
Part Number: 7480-1
This dispensing valve attaches directly to a pump fluid outlet. It is 7480-1
an economical way to dispense oil from a drum or tank when reels
and motors are not required. Use with a 1:1 ratio pump. Includes
non-drip tip and fluid diffuser to minimize splashing. Fluid inlet is
3/4" NPTF(m). Maximum operating pressure 500 psi. This valve
can be purchased as part of a pump package. See page 104.
Section 12 Meters and Control Valves
Oil Bar Fluid Dispensing Valve
Part Number: 7481-1
For use with oil bars. Dispensing valve attaches to oil bar housing.
Permits easy filling of oil containers. Includes non-drip tip and fluid
diffuser to minimize splashing. Fluid inlet is 3/4" NPTF(m). Maximum
operating pressure 500 psi.
7481-1
325762
Section 12 Meters and Control Valves
Part Number 338635 — Dispensing Valve with Pump for 55 gallon drum.
Order part number 338635 to receive all the parts listed below.
Quantity Part No. Description
1 7480-1 Dispensing Valve
1 7936 Air Filter Regulator (1/4" NPTF)
1 9916-A Pump Transfer (1:1 ratio)
1 327033 Adapter
1 338147-4 Tube Extension
This is the perfect system where reels and metered dispensing are not required.
Package is complete with all necessary connecting hardware. This is a value
priced option for users who don’t require high volume delivery systems.
Suitable for motor oils and hydraulic oils in smaller garages and shops. Fits a 55
gallon container. Package includes a 1:1 ratio RAM pump and a pump mount 338635
dispensing valve. Dispensing valve allows ready withdrawal of needed amount
of product.
An air pressure regulator and gauge are included to protect the pump and
ensure long, trouble-free operation.
B6647
Water/Valve Bibb
Part Number BSWA-321
For dispensing water, antifreeze or windshield
washer fluid. Inlet 1/4" NPTF(f). BSWA-321
Section 13 Air Components
Filters/Regulators/Lubricators
Filter/moisture separators, regulators and lubricators combine to clean, dry and lubricate the air going into
pump equipment. This helps to maintain efficient operation and prolongs the life of the pump. The moisture
separator removes condensation and foreign material from the air supply. Excess moisture will cause corroding
of the pump components. A regulator, regulates the air pressure so that the air is supplied to the pump at a
consistent air pressure. The lubricator adds lubricants back into the system that the air blows out.
Alemite highly recommends the use of filters/moisture separators and regulators for all pump systems.
Filter/Regulator Packages
Packages include filter/moisture separator with auto-drain, air regulator and gauge and necessary connecting
hardware to help clean and dry the air (at a regulated pressure) going to equipment. See individual
description of components. Maximum regulated pressure is 125 psi. Maximum inlet pressure is 175 psi.
Maximum operating temperature 120°F.
Mini Filter/Regulator
Part Number 7936: 7936 105
1/4" Mini Regulator and Filter/Moisture Separator with auto-dump.
Inlet/outlet 1/4" NPTF(f)
Part Coupling Size & Thread Hose Hose Max. Work Min. Work Available
Number ID Const.* Pressure psi Pressure psi Lengths (ft)
3534-B1 1/4” NPTF (m) x 1/4” NPTF (m) 1/4” Nylon 720 psi 180 psi 25
*Constructed of lightweight fungus resistant, oil and water impervious nylon
Section 13 Air Components
Tire Inflation Gauge
Part Number 306586
One-piece aluminum casting with built in air valve, air
pressure gauge, and standard hardened steel tire chuck.
Overall length 19". Valve inlet: 1/4" NPTF (f).
306586
B6647
108
Water/Valve Bibb
Part Number BSWA-321
For dispensing water, antifreeze or windshield
washer fluid. Inlet 1/4" NPTF(f). BSWA-321
Section 14 Accessories
Pump Accessories
Drum Covers
Made of heavy-gauge steel for durability. Cover flange provides rigidity
and maintains solid position on drum. Pump mounts in center of cover. 338166
Three thumb screws clamp over drum rim, except 324793-4 and 324792-4.
Covers are recommended for all outdoor use to prevent trash & water
(rain, snow, etc.) from contaminating product.
Lubricant Strainers
Sturdy units installed near supply pumps in pipeline ensure clean lubricant.
Offer little flow restriction. Filter elements are readily accessible for cleaning.
*Stainless steel
111
Bearing Packers
These units remove old grease from race and cage
of roller and ball bearings and repack them with 6709-B4
fresh lubricant. A cover is included to keep dirt out
when not in use.
328190-B4
Siphon Kit SWA306
1) 338147-7 Suction Tube
2) 326750-B1 Bung Adapter
3) NPN 1-1/2" (f) x 1" (f) 90° Elbow
4) SWA279 5' x 1" 1 Wire Braid Hose 1" MBE
5) 1000-1616 1" (f) x 1" (m) Swivel Connector
112 6) 328207 1-1/2" (m) x 1" (f) Reducer
NPN - available from your distributor
Adapters
Extra heavy-duty high-pressure connection units withstand potential pressures in lubrication. All steel
components are bright zinc plated to resist corrosion.
Pipe Coupling
Part Number Thread (f) x (f)
42763* 1/8" NPTF x 1/8" NPTF
42802* 1/4" NPTF x 1/4" NPTF
53495* 3/8" NPTF x 1/2" - 27**
*Hex
** NS Taper Thread
Section 14 Accessories
Pipe Unions
Recommended for all piped system installations. Permits inspection
or replacement of pipe sections.
Shut-off Valves
Use in pipe line at each outlet to cut-off flow of lubricant when desired without affecting other outlets.
115
Hoists
Hoists guide and stabilize the pump and follower assembly as they apply pressure to and move downward
with the material being pumped. The 7818-F5 Bridge Hoist can also apply ram pressure to the follower.
Hoists are also needed to raise and lower the pump and follower assembly when containers are changed.
Bridge Hoists
Part Number: 7818-F5
Air operated, twin cylinder, bridge hoist features controlled ram
pressure and equipment weight in priming the heaviest
pumpable materials. Unit includes guide rods, drum retaining
mechanisms and vacuum-break and pump-air hose assemblies.
Integral control panel controls air applied to pump (on-off controls),
to vacuum-break hose assemblies (on-off controls) and to hoist
cylinders. Hoist base plate (34-1/4" x 24") bolts to floor.
Three position (up-down-neutral) hoist air control. “Up” position
raises equipment with air pressure. “Neutral” position holds
equipment in any position. “Down” position lowers equipment
using equipment weight and additional priming thrust from
hoist cylinders.
Unit height is 69-1/4" (lowered) and 107" (raised).
Unit width is 42-1/2". 7818-F5
Unit depth is 27-3/16". shown with
Air inlet is 3/4" NPTF(f). 7785-B5
Maximum air pressure is 200 psi. and 327247
Section 14 Accessories
Single Post Pump Hoists
Part Number: 2741-4
Air operated hoist and cover assembly accepts both bung and base mounted
pumps. Adapter plate 322593 (order separately) adapts cover assembly to bung
mounted pumps. Hoist and cover swing full 360°. Cover automatically positions
pump over center of drum during down travel and seals material from contamination.
Push/pull valve controls air to hoist. 2741-4
Unit height is 62-1/8" (lowered) and 98-5/8" (raised).
Air inlet is 1/4" NPTF(m).
Maximum air pressure is 150 psi.
116
Part Number: 2743-4
For 7700 Series Pumps. Air-operated hoist lifts and lowers pumps for fast
and easy drum changes. Hoist arm adjusts for different pump heights,
swings a full 360° and can serve one or more pumps. Push/pull air valve
controls hoist. 11-1/2" base bolts to floor. Consists of model 322550-A4
hoist and model 324613 Arm Assembly. 2743-4
Unit height is 62-1/8" (lowered) and 98-5/8" (raised).
Air inlet is 1/4" NPTF(m).
Maximum air pressure is 150 psi.
324880-B4
shown with
8550-A1
Section 14 Accessories
Portable Lube Truck Accessories
Tie Down Kits
Provide safe mounting of pumps and drums to platform or
321340
truck bed. Tie down rods hook into eye bolts; hand sized
knobs afford quick removal of tie-down rod for quick drum
changes. Each Tie Down Kit consists of two each: Rods,
knobs, eye bolts & connecting components.
324831
Drum Nest
Part Number: 326060-4
Used to provide added security to maintain position of 55-gallon and 400 lb. containers. Includes nuts, bolt,
and washers.
Section 14 Accessories
Dollies/Hand Trucks 316315-5
Band Dolly
Part Number: 336575-A1
336575-A1
For 5-gallon pails or 35 lb. pails. Four free-swiveling casters on
adjustable band provide mobility. Drum rests on three sturdy
welded platforms.
6774-4
119
120
7835 SERIES 7886 SERIES
SAE 10 Oil at 75° F SAE 10 Oil at 75° F
8301 8302
Water at 70° F and a 1 foot flooded suction Water at 70° F and a 1 foot flooded suction
121
8303 8304-1
Water at 70° F and a 1 foot flooded suction Water at 70° F and a 1 foot flooded suction
9918-A 9920
SAE 10 Oil at 75° F SAE 10 Oil at 75° F
122
9940, 9941, 9949 SERIES 9960, 9968, 9969
NLGI 2 Grease at 75° F SAE 10 Oil at 75° F
support and customer service possible, each designed to help you get the most out
of everything Alemite offers. From over-the-phone tech tips to more in-depth training,
Technical Service
Customer Service
Product Training
Distributor Network
ALEMITE CORPORATION
7845 Little Avenue
Charlotte, NC 28226
Phone: 704-542-6900
800-822-4579
Fax: 704-542-4650
www.alemite.com
LIT070 5/02
2 6 0 0 C A T A L O G