Академический Документы
Профессиональный Документы
Культура Документы
Previous Screen
Product: EXCAVATOR
Model: 330D L EXCAVATOR B6H
Configuration: 330D L Excavator B6H00001-UP (MACHINE) POWERED BY
C9 Engine
Systems Operation
320D, 321C, 323D, 324D, 325D, 328D, 330D, 345C, 365C, 385C, M325D and W345C
Excavators Monitoring System
Media Number -RENR8068-04 Publication Date -01/03/2006 Date Updated -29/03/2006
i02301906
Status Mode
SMCS - 7490
The "STATUS" menu allows the user to view input, output and miscellaneous status information for
the machine.
Illustration 1 g01152977
(8) Up key
(15) OK key
The "STATUS" menu option is entered by selecting "STATUS" from the "SERVICE" menu. Press
the up key (8) or down key (13) until "STATUS" is highlighted in order to select this option. Then
press the "OK" key (15). Refer to Illustration 2.
Note: Refer to Systems Operation, "Service Mode" for instructions to get to the "SERVICE" menu.
Illustration 2 g01152726
z DIGITAL IN STATUS
z ANALOG IN STATUS
z OUTPUT STATUS
z MISC STATUS
Illustration 3 g01152727
From the "DIGITAL IN STATUS" menu, use the appropriate up key (8) or down key (13) to scroll
through the listed information for the system components.
Refer to Table 1 for a list of system components that are available in the "DIGITAL IN STATUS"
menu.
Note: The digital input parameters will vary for each model. The item which is checked in the
following table may not indicate the current machine configuration.
Table 1
"RIGHT JOYSTICK SW
X Right Joystick Switch #1 Status
#1"
"LEFT JOYSTICK SW #2"
X Left Joystick Switch #2 Status
"RIGHT JOYSTICK SW
X Right Joystick Switch #2 Status
#2"
"ATCH PUMP PRES SW" Attachment Pump Pressure Switch Status
X
"MAGNET STANDBY
X Magnet Circuit Standby Switch Status
SW"
High power Auxiliary Circuit Enable
"UHD SW" X
Switch Status
Low Power Auxiliary Circuit Enable
"TILT CAB SW" X
Switch Status
"SMART BOOM SW" X Smart Boom Switch Status
"HYD LOCK SW" X X Hydraulic Lock Switch Status
"CNTR WEIGHT SW" X X Counterweight Removal Switch Status
"JOYSTICK PRES SW" X Swing/Implement Pressure Status
"TRAVEL PRES SW" X Travel Pressure Switch Status
"IMPLEMENT PRES" XX Implement Pressure Switch Status
"ATCH VALVE #1 SW" X Attachment Input #1 Switch Status
"ATCH VALVE #3 SW" X Attachment Input #3 Switch Status
"ATCH #1 TOOL SW" X Attachment #1 Tool Switch Status
"ATCH #2 TOOL SW" X Attachment #2 Tool Switch Status
"ATCH #3 TOOL SW" X Attachment #3 Tool Switch Status
"ATCH #4 TOOL SW" X Attachment #4 Tool Switch Status
"HYD OIL LVL SW" X Hydraulic Oil Level Status
"COOLANT LVL SW" X X Engine Coolant Level Status
"ENGINE OIL LVL SW" X X Engine Oil Level Status
"ENGINE OIL PRESS SW"
X X Engine Oil Pressure Status
From the "ANALOG IN STATUS" menu, use the appropriate up key (8) or down key (13) to scroll
through the listed information for the system components.
Refer to Table 2 for a list of system components that are available in the "ANALOG IN STATUS"
menu.
Note: The analog input parameters will vary for each model. The item which is checked in the
following table may not indicate the current machine configuration.
Table 2
Illustration 5 g01152737
From the "OUTPUT STATUS" menu, use the appropriate up key (8) or down key (13) to scroll
through the listed information for the system components.
Refer to Table 3 for a list of system components that are available in the "OUTPUT STATUS"
menu.
Note: The output status parameters will vary for each model. The item which is checked in the
following table may not indicate the current machine configuration.
Table 3
"NUTRAL FLOW
X Neutral Flow Bypass Solenoid Status
BYPASS"
"ANTI DRIFT BOOM" X Boom Anti Drift Solenoid Status
"ANTI DRIFT STICK" X Stick Anti Drift Solenoid Status
"AUTO LUB RELAY" X Auto Lube Solenoid Status
"COOLING FAN
X Fan Speed Solenoid Current Status
CURRENT"
"REVERSE FAN SOL" X X Reverse Fan Solenoid Status
"LIFT MODE SOL" X Heavy Lift Control Status
"1P/2P CHANGE SOL" Auxiliary Circuit Flow Combining Solenoid
X
Status
"FAULT ALARM" X X Action Alarm Status
"DESIRED ENG SPEED"
X X Desired Engine RPM
Illustration 6 g01152742
From the "MISC STATUS" menu, use the appropriate up key (8) or down key (13) to scroll through
the listed information for the system components.
Refer to Table 3 for a list of system components that are available in the "MISC STATUS" menu.
Note: The miscellaneous status parameters will vary for each model. The item which is checked in
the following table may not indicate the current machine configuration.
Table 4
"ALTERNATOR R TERM"
X X Alternator Status
"DES ENG FAN SP" X Desired Engine Cooling Fan Speed
High Power Auxiliary Circuit Flow Rate
"EHD FLOW RATE" X
Copyright 1993 - 2007 Caterpillar Inc. Mon Mar 5 14:07:36 EST 2007
All Rights Reserved.
Private Network For SIS Licensees.