Академический Документы
Профессиональный Документы
Культура Документы
Gun
The Gun
- The model of the Positive Material Identification is for sure
a Niton XL3t-GOLDD. The handbook has been forwarded
to all the managers, who are responsible for distributing it.
Solutions
● Arm mounts
● Lowering the table to reduce the need to bend.
● Ceiling straps
● Bungie from ceiling
● Scanning pod similar to the movements of a 3d printer but scans parts instead of prints
them
Ideas
● https://www.youtube.com/watch?v=iAnC6_Ow-8Q
● https://www.youtube.com/watch?v=UwIdVVJ9KnU
●
- The current method for shortening the pipe and attaching parts is poorly streamlined and
can be done better, either through machine or process improvement. The worker must
be able to do the following:
1. The very outer layer needs to removed.
2. Two layers of strands needs to be cut out.
3. The Kevlar strands need to be plucked out and separated from the rest of the pipe.
4. The very inner layer needs to be cut.
5. Attach metal coupling to attach the next hose to the original one.
Solutions
● Combining the horizontal/vertical cutting process into a single step.
● A serrated/fallanged bar to be inserted/rolled to pull out all the strands at once.
● A set of scissors that is in a circle and cuts next to every strand.
https://join.slack.com/t/manufacturingteledyne/shared_invite/enQtMzM0MDIzODE3ODYzLTQ2
NTgyY2UzNzgzNTM5ZjhkNjFjODJiMzcxM2ZiZjkzYTQ1NDZkOTUyNzM4YTJhOTZkMGUzYTR
kODFhMmM4ZmQ
1. What different methods have they tried before? (Ask for reasons why they did and didn’t
like those methods)
They use some foam to hold up the gun to relieve stress.
No continuous prototyping phases.
Pg 400 extra device to make it easier to use the gun.
2. What type of material do you use for the insulation while using the PMI gun?
None. They get 3 feet away from the scatter zone so it doesn't affect anyone.
3. How do they currently teach them how to use the PMI gun?
They first go a classroom training then they go through a on hand training with a certified
professional .
4. Are you interested in a in depth PMI gun how to presentation?
No they already have a professional video shows how to use the gun safely. But they would like
to have a description on how to use it.
5. What is the best way to get in contact with the PMI Technician? (So we can get in
contact and ask question)
6. Special requirements?
Yes t 3x5’ 7x7’
There are more than one workstation but they have to move the gun to scan incoming bars ()