Error management
serie?
Error Management :
Error Fauit Error Fault
1 | Wash Tank Tevel sensor 2 | Wash Tank Temperature
sensor
3__| Boiler Temperature sensor 4 | Wash pump water movement
5___| Wash Tank filling fault 6 | Drain pump fault
7 | Boiler heating fault 8 | Wash Tank heating fault
9 | Wash Tank water level low 10 [Inlet Valve for pre-rinse faulty
11 | Wash pump fault 12 | Bus Cable fault
13 | Wash tank not filling 15 | Boiler not filling a
16 | Low water flow(E version 18 { No programme number stored
only) -
19 | Inlet valve not closing 20 [niet valve letting by
21 | Water detected in tank RS]_| Wash tank filers blocked
with machine switched off J
Boiler temperature over 95°C
When spanner symbol flashes switch off the machine from the display panel and the
error message will be d
played on the screen,
|
1 _ on/off switch
2”_Drain down cycle
3 Status /start Button
4” + additional functions and
temp.display
A Rinse temperature
B Wash tank temperature displa
3 Short cycle
6 Extended cycle
77 Temperature change-over
8 Pre-tinse option
tonyshechan
Page 1
31/10/2008