0 оценок0% нашли этот документ полезным (0 голосов)
13 просмотров2 страницы
The document contains experimental results from a pivot friction apparatus testing different materials at various angles and radii. It shows the load on hangers, total load, coefficient of friction, and material combination for each test. Tests were conducted at angles of 60, 90, 120, and 180 degrees with radii of 20, 29, 36, and 40 mm respectively using combinations of cast iron, stainless steel, teflon, nylon, and brass in both dry and lubricated conditions.
The document contains experimental results from a pivot friction apparatus testing different materials at various angles and radii. It shows the load on hangers, total load, coefficient of friction, and material combination for each test. Tests were conducted at angles of 60, 90, 120, and 180 degrees with radii of 20, 29, 36, and 40 mm respectively using combinations of cast iron, stainless steel, teflon, nylon, and brass in both dry and lubricated conditions.
The document contains experimental results from a pivot friction apparatus testing different materials at various angles and radii. It shows the load on hangers, total load, coefficient of friction, and material combination for each test. Tests were conducted at angles of 60, 90, 120, and 180 degrees with radii of 20, 29, 36, and 40 mm respectively using combinations of cast iron, stainless steel, teflon, nylon, and brass in both dry and lubricated conditions.
Angle: 60° Radius of Bearing: 20 mm Mode of Friction: Dry
Load on hangers Total Load Coefficient of friction
Sr No Combination of pivot F W µ 1 5.7 + 5.7 = 11.4 115.16 0.495 CI on SS 2 4.1 + 4.1 = 8.2 115.54 0.3548 SS on SS 3 1.2 + 1.2 = 2.4 111.95 0.1072 Teflon on SS 4 1.6 + 1.6 = 3.2 112.2 0.1426 Nylon on SS 5 2.9 + 2.9 = 1.6 115.79 0.2505 Brass on SS
Angle: 90° Radius of Bearing: 29 mm Mode of Friction: Dry
Load on hangers Total Load Coefficient of friction
Sr No Combination of pivot F W µ 1 1.4 + 1.4 = 2.8 116.56 0.0828 CI on SS 2 1.8 + 1.8 = 3.6 117.01 0.1061 SS on SS 3 1.6 + 1.6 = 3.2 112.13 0.0984 Teflon on SS 4 1.1 + 1.1 = 2.2 113.07 0.0671 Nylon on SS 5 0.8 + 0.8 = 1.6 117.42 0.047 Brass on SS
Angle: 120° Radius of Bearing: 36 mm Mode of Friction: Dry
Load on hangers Total Load Coefficient of friction
Sr No Combination of pivot F W µ 1 0.7 + 0.7 = 1.4 119.24 0.0326 CI on SS 2 0.6 + 0.6 = 1.2 119.93 0.0278 SS on SS 3 0.6 + 0.6 = 1.2 112.48 0.0296 Teflon on SS 4 1.4 + 1.4 = 2.8 113.83 0.0683 Nylon on SS 5 0.5 + 0.5 = 1 120.5 0.0230 Brass on SS
Angle: 180° Radius of Bearing: 40 mm Mode of Friction: Dry
Load on hangers Total Load Coefficient of friction
Sr No Combination of pivot F W µ 1 4.7 + 4.7 = 9.4 118.14 0.1989 CI on SS 2 6.0 + 6.0 = 12.0 118.67 0.2528 SS on SS 3 1.4 + 1.4 = 2.8 112.34 0.0623 Teflon on SS 4 1.2 + 1.2 = 2.4 113.52 0.0529 Nylon on SS 5 5.0 + 5.0 = 10.0 119.14 0.2098 Brass on SS