Академический Документы
Профессиональный Документы
Культура Документы
Version 1.12
Added Kill Dry Mode. It must be used with trails mode also active.
Adds support for extended preset mode
Changed LED behavior in trails mode
Added support for tap tempo on Control Input port
Added Intensity/Mod/Rate knob reassignment feature
Version 1.13
Fixes bugs introduced in 1.12
Version 1.14
Added tap tempo subdivisions. Allows for setting of a master tempo either from the
footswitch, MIDI, or Time knob. Master tempo is then scaled by a new Tap Division
parameter that is preset stored and Neuro editable. Tap subdivision switch selects the same
divisions as in the original release version (quarter, dotted 8th, triplet), but there are now a
12 additional subdivisions available (total of 15).
Tap tempo subdivisions are stored per preset
Effect selector LEDs now display the correct LED when a preset is recalled or the app is used
to change the engine type. If the default engine has been overwritten, the LED will blink to
indicate that it is no longer representing the default engine.
Delay time slew between presets has been altered so it makes a clean jump without a
Doppler shift.
Global tempo obeys tap subdivisions saved in presets
Added an offset mode (global option) for the Mix knob, where 50/50 mix is at 80% of the
knob’s range. This will affect existing presets in that the relative wet/dry levels may change
slightly.
External loop option must be enabled (global option) in order to use routing modes that
utilize the external effects loop or feedback loop (Output 2 -> Input 2).
Version 1.16
Fixed startup in buffered bypass mode bug: was causing pedal to be stuck in bypass after
changing the bypass mode to Analog Buffered and power cycling.
Fixed intensity knob bug: previously, when adjusting a parameter via Neuro which was
already assigned to the knob and saving, the correct settings may not have been correctly
recalled.
Fixed expression and Hub expression mapping bug that was introduced in an earlier version.
Version 1.18
Updated functionality for use with the Neuro Desktop application.
Add Kill Dry mode
Various functional bug fixes
Version 1.19
Minor bug fixes to new features from 1.18
Version 1.20
Added New MIDI functionality:
o Bypass/Engage toggle (CC 102)
o Preset Recall via CC in Bypass state (CC103)
https://www.sourceaudio.net/downloads.html
The Neuro Desktop installer comes pre-packaged with the latest update files for the Nemesis and
other Source Audio products.
After the Neuro Desktop is downloaded and installed on your computer, run the application and
connect the pedal you would like to update via USB. Please note that our pedals must be powered
with a 9 Volt supply and are not capable of USB bus power.
A connected pedal will appear in the Neuro Desktop in the Connections pane.
If an update is available, the Update Device button will be highlighted in yellow. Click the button to
start the update process.
Update complete:
If it’s necessary to run the update again, just press the update button again to manually select a file to
use for the update.