Академический Документы
Профессиональный Документы
Культура Документы
Midterm 2
Dated: Course Title:
Name: I.D #:
Q.1: For the frame shown, calculate the degree of restraint (Ψ) at joints D and G.
i. Beams cross-section 300×500 mm, and effective span = 5.0 m (c/c of the columns),
ii. Columns cross-section (AD 300×300 mm),
iii. Columns cross-section (DG 350×350 mm),
iv. Columns cross-section (GB 400×400 mm), and
v. All columns effective height = 4.0 m (c/c of beams). A
(c/c of the beams).
0.7(EI / L)columns
= D
0.35(EI / L)beams C E
F G H
B
Q.2: The column shown is in a braced (nonsway) frame, and the loads shown
are working loads. The cross-section is square (300×300 mm), Lu = 4.5 m,
k = 0.85, and f c' = 30 MPa . Determine the load and moment that the column
should be designed for? PD = 600 kN +
0 .4 E c I g
(klu / r ) 34 + 12M1 / M 2 , EI = , PL = 480 kN
1 + dns
Pud e = 75 mm
dns = , Ec = 4730 f c'
Pu
2 EI , Cm
Pc = ns =
2 Pu
(klu ) 1−
0.75 Pc e = 150 mm
PD = 600 kN +
PL = 480 kN