Академический Документы
Профессиональный Документы
Культура Документы
6+ yrs in oil and gas with major contractor or consultant predominantly performing detail design of offshore
facilities
Bachelor Degree in Chemical Engineering (Master Degree is Preferred)
BASIC FUNCTIONS
- Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project
specifications, design codes and standards.
- Apply knowledge and skills to a wide range of standard and nonstandard situations.
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
- Manage own time to meet agreed deadlines and budgets, and develop plans for short-term work
activities in own area.
- Clearly communicate and explain complex issues and work to establish understanding.
- Be fully familiar with the project scope of work, specifications, schedule and all inter-discipline
requirements; including identifying concerns as early as practicable and taking appropriate initiatives
to address the issues.
- Identify changes to scope and promptly raise change notifications, including providing any
necessary supporting documentation and estimates. Provide similar support for Variation Orders .
Interface with all disciplines to develop clash free designs.
Interface with other departments to obtain input for Discipline designs and drawings.
Maintain close co-ordination with other engineering disciplines, Planning, Fabrication, Marine, and Project
Management Team, as required .
Assist in preparation of estimates for bid proposals, including technical query reviews, execution statements
and manhour estimates.
Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred
McDermott procedures, specifications, standards, practices and operational requirements.
Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.
Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and
functional integrity.
- Attend project review meetings, vendor meetings, engineering meetings and offshore site surveys,
as required.
- Provide technical direction and review of Designers producing products related to Process
Engineering .
- Assist in providing necessary design inputs to other disciplines to enable them in proceeding with
their deliverables.
- Assist procurement personnel in procuring Discipline equipment, materials and services; ensuring
that work produced complies with Customer objectives and procedures. Procurement assistance includes
preparing and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid
tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to
expedite vendor documents, as directed by Discipline Lead Engineer.
- Review vendor and subcontractor submittals, checking for compliance with project specifications
and providing comments as necessary.
- Provide technical support to all fabrication queries, including identifying defect I rectification
requirements.
- Keep the Lead Engineer apprised of all activities and concerns, technical, budgetary and manpower
related.
Assist in providing inputs for actual, planning and forecasting progress reports including associated
productivity.
Check final subcontractor and vendor data manuals to ensure that all requested data has been received and
approved.
Participate in internal, Customer and third party technical audits on engineering deliverables and vendor
documents .
Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities, auditors,
third parties, etc.) on their review and approval.
Capture lessons learned and enter into MDR's Lessons Learned system. Capture Knowledge Objects and
enter into MDR's K.now system.
Act as a resource for colleagues with less experience.
Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design
calculations, software, requisitions, technical bid evaluations, technical queries, etc.
o SAFE charts.
o Process specifications.
o Flare radiation and dispersion calculations. o Depressurization and flare network study.
o Equipment and line sizing calculations.
o Fluid lists.
o Process studies.
Review process information in supplier/vendor data for conformance with project requirements.
0 Layout review
0 Safety studies
0 Equipment datasheets
0 Instrument datasheets
Job Description *
The SCM Manager will be in charge of all proposals and manage Subcontracts
Take a Proposal and coordinate the SCM activities for that package including but not limited to
Identify the packages that will be priced in Market, Internal Estimate from SPS based on
real bids, internal estimate
Coordinate with Engineering team on the Proposal Strategy and identify a MR/SOW plan
Prepare the Procurement Status Report (PSR) and work with SPS and Engineering for
dates
Issue Subcontracts to the market and coordinate meetings with Vendors
Support all PMT meetings as the Procurement Interface Mgr for the proposal
Rack up the Procurement costs for Purchasing, Subcontracts, Logistics, MAO
Provide the Procurement Deliverables to complete the proposal
Job Requirements *
Bachelors Degree
Advanced English Skilss both spoken and written
8 years of experience managing project over $250 MM USD
Company Overview:
McDermott is a premier, fully-integrated provider of technology, engineering and construction
solutions to the energy industry. For more than a century, customers have trusted McDermott to
design and build end-to-end infrastructure and technology solutions—from the wellhead to the
storage tank—to transport and transform oil and gas into the products the world needs today.
6+ yrs in oil and gas with major contractor or consultant predominantly performing detail design of offshore
facilities
Bachelor Degree in Chemical, Electrical, or Electronics and Instrumentation Engineering
REPORTS TO:
Project: Lead Engineer
LIAISE WITH:
All Engineering disciplines, Fabrication Group, Safety Dept, Offshore Group, Document Control,
Procurement Group, Subcontractors and Vendors, and Customers.
BASIC FUNCTIONS
- Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis,
project specifications, design codes and standards.
- Apply knowledge and skills to a wide range of standard and nonstandard situations.
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
- Manage own time to meet agreed deadlines and budgets, and develop plans for short-term
work activities in own area.
- Clearly communicate and explain complex issues and work to establish understanding.
TASKS & RESPONSIBILITIES
- Be fully familiar with the project scope of work, specifications, schedule and all inter-
discipline requirements; including identifying concerns as early as practicable and taking appropriate
initiatives to address the issues.
- Identify changes to scope and promptly raise change notifications, including providing any
necessary supporting documentation and estimates. Provide similar support for Variation Orders .
- Interface with all disciplines to develop clash free designs.
- Interface with other departments to obtain input for Discipline designs and drawings.
- Maintain close co-ordination with other engineering disciplines, Planning, Fabrication, Marine, and
Project Management Team, as required.
- Assist in preparation of estimates for bid proposals, including technical query reviews , execution
statements and manhour estimates.
- Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred
McDermott procedures, specifications, standards, practices and operational requirements.
- Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.
- Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications
and functional integrity.
- Attend project review meetings, vendor meetings, engineering meetings and offshore site surveys,
as required.
- Provide technical direction and review of Designers producing products related to Automation &
Instrumentation Engineering.
- Assist in providing necessary design inputs to other disciplines to enable them in proceeding with
their deliverables.
- Assist procurement personnel in procuring Discipline equipment, materials and services; ensuring
that work produced complies with Customer objectives and procedures. Procurement assistance includes
preparing and reviewing requisitions , evaluating technical quotations and preparing queries, compiling bid
tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to
expedite vendor documents, as directed by Discipline Lead Engineer .
- Review vendor and subcontractor submittals, checking for compliance with project specifications
and providing comments as necessary.
- Provide technical support to all fabrication queries, including identifying defect I rectification
requirements.
- Keep the Lead Engineer apprised of all activities and concerns, technical, budgetary and manpower
related.
Assist in providing inputs for actual, planning and forecasting progress reports including associated
productivity .
Check final subcontractor and vendor data manuals to ensure that all requested data has been received and
approved.
Participate in internal, Customer and third party technical audits on engineering deliverables and vendor
documents.
Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities, auditors,
third parties, etc.) on their review and approval.
Capture lessons learned and enter into MDR's Lessons Learned system. Capture Knowledge Objects and
enter into MDR's K.now system.
Act as a resource for colleagues with less experience.
Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design
calculations, software, requisitions, technical bid evaluations, technical queries, etc.
Prepare I review automation system definition, including philosophy, specifications, safety drawings, and
system architecture.
Prepare I review ESD logic (as applicable)lcause-&-effect diagrams and F&G logic (as applicable )lcause-&-
effect diagrams .
Prepare I update I review specifications and data sheets for Automation and Instrumentation equipment.
Prepare I review inputs to P&ID development and markups based on receipt of vendor information. Review
A&l equipment testing procedures.
Attend A&l equipment FATs, as required. Assist in close out of HAZOP action items
Senior Principal Electrical Designer - (1900646)
TYPICAL EXPERIENCE EDUCATION
BASIC FUNCTIONS
- Prepare and develop arrangement and detail conceptual, FEED,
studies, and detail design drawings of high technical quality and
professional consistent presentation ensuring clarity and ease of
construction.
- Develop 3D models and ensure clash free with all other disciplines.
- Ensure design deliverables are completed and issued per project
specifications, MDR and project Level 2 & 3 procedures, and within agreed
schedules and budgets.
- Apply knowledge and/or skills to perform complex work.
- Set priorities, organize own work and time to meet objectives, and
(as Lead Designer) foreca st and plan resource requirements.
- W hen acting as Lead Designer, in addition:
Set up and maintain the Discipline Master design drawing and document
files. Develop and maintain project job books.
Prepare and review Discipline deliverables such as: o 3D model
o Detailed design drawings
• Schedules
• Execution plans
• Deliverables lists
• Deliverables
• Forecasts
• Estimates
• Procedures
• MTOs
• Single discipline checks (SDC) I inter-discipline checks (IDC)
10 years min with major contractor or consultant of which 9+ years of experience in predominately offshore
oil and gas
High School graduate with a diploma in Civil, Electrical or Mechanical Design, or Drafting in a related
discipline or equivalent experience
BASIC FUNCTIONS
- Prepare and develop arrangement and detail conceptual, FEED, studies, and detail design drawings
of high technical quality and professional consistent presentation ensuring clarity and ease of construction.
- Develop 3D models and ensure clash free with all other disciplines.
- Ensure design deliverables are completed and issued per project specifications, MDR and project
Level 2 & 3 procedures, and within agreed schedules and budgets.
- Apply knowledge and/or skills to perform complex work.
- Set priorities, organize own work and time to meet objectives, and (as Lead Designer) foreca st and
plan resource requirements.
- W hen acting as Lead Designer, in addition:
o Direct large Electrical Design team as Lead Designer.
o Lead projects as Lead Designer engaging the participation of other disciplines. Coordinate all
activities within own discipline and Discipline interfaces with other disciplines.
o Lead the design team of the assigned work area and complete within planned schedule and
budget, in accordance with standards, MDR and project-specific procedures and to a high professional
standard.
o Plan, organize and direct all aspects of Discipline execution on the assigned project including
scope, deliverables, schedule and all Discipline manpower resources - agree allocations with the Engineering
Manager.
o Maintain responsibility for progress and productivity, identifying any required corrective action.
o Act as project-based Discipline point of contact in communications and meetings with Project Team,
Customer, vendor/supplier and/or subcontractor counterparts; and relevant agencies such as certifying
authorities, auditors , third parties, etc.
o Coordinate project Design interdisciplinary activities to ensure timely and organized distribution of
information amongst all Lead Designers .
- Become fully familiar with the Contract Scope of Work, specifications, schedule and all inter
discipline requirements ; including identifying concerns as early as practicable and taking appropriate
initiatives to address the issues.
- Identify changes to scope and promptly raise change notification in the Change Management
system, including providing any necessary supporting documentation and estimates. Provide similar support
for Variation Orders .
- Interface with other disciplines to obtain input for Discipline designs and drawings.
- Liaise with other discipline support groups to ensure clearly defined interfaces, deliverables and
schedules are met.
- Assist Discipline Lead Designer in preparing estimates for proposals and job scope changes, including
execution statements , work schedules, and manhour requirements, identifying software
Participate in finalizing deliverables lists, deliverables and philosophies to ensure compliance with
specifications and functional integrity.
Review project schedule and fabrication schedule in relation to construction sequence, milestones, and
design scope.
Attend project kickoff and review meetings, vendor/supplier meetings, engineering and design meetings and
offshore site surveys as required.
Research Customer standards and procedures in order to prepare project-specific design procedures and
standards for submission to the Customer for approval.
Set up and maintain the Discipline Master design drawing and document files. Develop and maintain project
job books.
Prepare and review Discipline deliverables such as: o 3D model
o Detailed design drawings
- Develop conceptual layouts based on experience and good offshore engineering practice & develop
these through detail design.
- Assist the Lead Designer in supervising the preparation of key Discipline drawings.
- Liaise with the responsible Engineers for the timely expediting of Vendor Data to efficiently progress
the project according to schedule requirements .
- Review drawings issued by other disciplines and incorporate the required data into Discipline
drawings.
- Review vendor drawings and documents and incorporate required vendor data into Discipline
drawings and documents .
- Assist in providing necessary design inputs to other disciplines to enable them in proceeding with
their deliverables .
- Generate IDC design documentation for the project.
- Perform design verification through single discipline checks (SDC) and/or inter-discipline checks
(IDC), providing comments to Lead Designer.
- Review all project IDC design documentation for detail technical interfaces.
- Maintain single discipline and inter-discipline check drawings and filing, including final archiving.
o Supervise and guide assigned Designers for Discipline design and design deliverables .
o Ensure Designers assigned to the project execute assigned tasks in a consistent manner.
o Prepare working forecasts identifying change management plans, corrective action and real time
schedule.
o Provide Discipline inputs for actual, planning and forecasting progress reports including associated
productivity.
o Alert project team of any deviation from the scope or a need for change order.
o Monitor KPI measurement results, and take corrective action as necessary to improve Discipline
performance, including performance at interfaces with others.
o Coordinate with other disciplines' Lead Designers to ensure timely receipt of necessary design
inputs.
o Ensure Discipline Designers have sufficient input information for the drawing or model being
undertaken.
o Raise and approve technical queries to obtain missing information, clarify work scope , and to
maintain preferred McDermott procedures, specifications, standards, practices and
operational requirements.
• Schedules
• Execution plans
• Deliverables lists
• Deliverables
• Forecasts
• Estimates
• Procedures
• MTOs
o Review comments from Customers & other agencies on documents and drawings produced by the
team , and resolve and give guidance on their update and incorporation.
o Lead the Discipline team during project audits (internal, Customer and third party technical audits)
and Design Reviews.
o Assist Discipline Supervisor I Engineering Manager in the preparation of quarterly forecasts and
manpower planning.
Senior Structural Designer - (1900644)
TYPICAL EXPERIENCE EDUCATION
7 years min with major contractor or consultant of which 5+ years of experience in predominately offshore
oil and gas
High School graduate with a diploma in Civil, Electrical or Mechanical Design, or Drafting in a related
discipline or equivalent experience
BASIC FUNCTIONS
- Prepare and develop arrangement and detail conceptual, FEED, studies, and detail design
drawings of high technical quality and professional consistent presentation ensuring clarity and ease of
construction.
- Develop 3D models and ensure clash free with all other disciplines.
- Ensure design deliverables are completed and issued per project specifications, MDR and
project Level 2 & 3 procedures, and within agreed schedules and budgets.
- apply knowledge and/or skills to a range of activities .
- Set priorities, organize own work and time to meet objectives, and (as Lead Designer) forecast and
plan resource requirements.
- When acting as Lead Designer, in addition:
0 Direct small or medium Structural Design team as Lead Designer.
o Lead projects as Lead Designer engaging the participation of other disciplines. Coordinate all
activities within own discipline and Discipline interfaces with other disciplines.
o Lead the design team of the assigned work area and complete within planned schedule and budget,
in accordance with standards, MDR and project-specific procedures and to a high professional standard.
o Plan, organize and direct all aspects of Discipline execution on the assigned project including scope,
deliverables, schedule and all Discipline manpower resources - agree allocations with the Engineering
Manager.
o Maintain responsibility for progress and productivity, identifying any required corrective action.
o Act as project-based Discipline point of contact in communications and meetings wit h Project Team,
Customer, vendor/supplier and/or subcontractor counterparts; and relevant agencies such as certifying
authorities, auditors, third parties, etc.
- Become fully familiar with the Contract Scope of Work, specifications, schedule and all inter
discipline requirements; including identifying concerns as early as practicable and taking appropriate
initiatives to address the issues.
- Identify changes to scope and promptly raise change notification in the Change Management
system, including providing any necessary supporting documentation and estimates. Provide similar support
for Variation Orders.
- Interface with other disciplines to obtain input for Discipline designs and drawings.
- Liaise with other discipline support groups to ensure clearly defined interfaces, deliverables and
schedules are met.
- Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred
McDermott procedures, specifications, standards, practices and operational requirements .
- Participate in finalizing deliverables lists, deliverables and philosophies to ensure compliance with
specifications and functional integrity .
- Research Customer standards and procedures in order to prepare project-specific design procedures
and standards for submission to the Customer for approval.
- Set up and maintain the Discipline Master design drawing and document files.
o 3D model
Develop conceptual layouts based on experience and good offshore engineering practice & develop these
through detail design.
Assist the Lead Designer in supervising the preparation of key Discipline drawings.
Liaise with the responsible Engineers for the timely expediting of Vendor Data to efficiently progress the
project according to schedule requirements.
Review drawings issued by other disciplines and incorporate the required data into Discipline drawings.
Review vendor drawings and documents and incorporate required vendor data into Discipline drawings and
documents.
Assist in providing necessary design inputs to other disciplines to enable them in proceeding with their
deliverables.
Identify all items for which insufficient data is available to allow the drawing or model to be
completed (HOLDS), and list these on the drawing and on the standard 'HOLDS' list form. Notify the
Discipline Lead Designer when there are updates to the Holds list.
Perform design verification through single discipline checks (SOC) and/or inter-discipline checks (IDC),
providing comments to Lead Designer.
Review all project IDC design documentation for detail technical interfaces.
Maintain single discipline and inter-discipline check drawings and filing, including final archiving. Prepare,
issue and update material and weight data take-offs .
Assist Fabrication as required in the resolution of construction difficulties relating to design problems,
clashes, etc.
- Ensure compliance with the Project Execution Plan and the timely completion and archiving of
drawings and documents.
- Keep Lead Designer apprised of all activities, progress and concerns, including manpower and
budgetary related.
- Assist in providing inputs for actual, planning and forecasting progress reports including associated
productivity.
- Capture lessons learned and enter into MDR's Lessons Learned system.
- Guide less experienced Designers on MDR and Discipline procedures, standards, worksheets, design
calculations, software, technical queries, etc.
- Identify and provide training to staff in specific techniques and proprietary software.
- Provide information on employee performance to the Discipline Supervisor I Engineering Manager.
- Prepare I review and (as Lead Designer) approve Structural Design deliverables such as:
o Seafastening drawings
o Installation/lift drawings
- Review vendor documents and provide comments for structura l support requirements.
- Provide technical guidance to other designers for preparing structural detail drawings.
- Travel to fabrication yard or offshore to provide assistance during fabrication and/or installation, as
required.
o Prepare bid's and project's Discipline design budget and execution plans, updating as required.
o Identify project staff needs based on knowledge of individual designer's skill sets and provide
requests to the Discipline Supervisor I Engineering Manager.
o Plan, organize and assign tasks, responsibilities, and manhour budgets to the Discipline team, and
verify tasks are completed within budgets.
o Plan Discipline Level 4 detail deliverable schedule/ register compliant with the overall execution
plan.
o Supervise and guide assigned Designers for Discipline design and design deliverable s.
o Ensure Designers assigned to the project execute assigned tasks in a consistent manner.
o Prepare working forecasts identifying change management plans, corrective action and real time
schedule.
o Provide Discipline inputs for actual, planning and forecasting progress reports including
associated productivity.
o Alert project team of any deviation from the scope or a need for change order .
o Monitor KPI measurement results, and take corrective action as necessar y to improve
o Coordinate with other disciplines ' Lead Designers to ensure timely receipt of necessary
design inputs.
o Ensure Discipline Designers have sufficient input information for the drawing or model being
undertaken.
o Raise and approve technical queries to obtain missing information, clarify work scope, and to
maintain preferred McDermott procedures, specifications, standards, practices and operational
requirements.
• Schedules
• Execution plans
• Deliverables lists
• Deliverables
• Forecasts
• Estimates
• Procedures
• MTOs
o Review comments from Customers & other agencies on documents and drawings produced by the
team, and resolve and give guidance on their update and incorporation.
o Lead the Discipline team during project audits (internal, Customer and third party technical audits)
and Design Reviews.
o Assist Discipline Supervisor I Engineering Manager in the preparation of quarterly forecasts and
manpower planning.
o Assist Discipline Supervisor I Engineering Manager, and Project Engineering Manager or Project
Manager in Performance Evaluation of project team members.
o Coordinate with representatives from Fabrication and Marine to identify the construction sequence
and preferential design details.
o Ensure Structural item clashes identified in 3D model are addressed and resolved.
o Participate in 3D model reviews, and ensure Structural review comments are closed. o Travel
to fabrication yard or offshore to provide assistance during fabrication
10 years min with major contractor or consultant of which 5+ years of experience in predominately offshore
oil and gas
High School graduate with a diploma in Civil, Electrical or Mechanical Design, or Drafting in a related
discipline or equivalent experience
BASIC FUNCTIONS
- Prepare and develop arrangement and detail conceptual, FEED, studies, and detail design
drawings of high technical quality and professional consistent presentation ensuring clarity and ease of
construction.
- Develop 3D models and ensure clash free with all other disciplines.
- Ensure design deliverables are completed and issued per project specifications, MDR and
project Level 2 & 3 procedures, and within agreed schedules and budgets.
- apply knowledge and/or skills to a range of activities .
- Set priorities, organize own work and time to meet objectives, and (as Lead Designer) forecast and
plan resource requirements.
- When acting as Lead Designer, in addition:
0 Direct small or medium Structural Design team as Lead Designer.
o Lead projects as Lead Designer engaging the participation of other disciplines. Coordinate all
activities within own discipline and Discipline interfaces with other disciplines.
o Lead the design team of the assigned work area and complete within planned schedule and budget,
in accordance with standards, MDR and project-specific procedures and to a high professional standard.
o Plan, organize and direct all aspects of Discipline execution on the assigned project including scope,
deliverables, schedule and all Discipline manpower resources - agree allocations with the Engineering
Manager.
o Maintain responsibility for progress and productivity, identifying any required corrective action.
o Act as project-based Discipline point of contact in communications and meetings wit h Project Team,
Customer, vendor/supplier and/or subcontractor counterparts; and relevant agencies such as certifying
authorities, auditors, third parties, etc.
- Become fully familiar with the Contract Scope of Work, specifications, schedule and all inter
discipline requirements; including identifying concerns as early as practicable and taking appropriate
initiatives to address the issues.
- Identify changes to scope and promptly raise change notification in the Change Management
system, including providing any necessary supporting documentation and estimates. Provide similar support
for Variation Orders.
- Interface with other disciplines to obtain input for Discipline designs and drawings.
- Liaise with other discipline support groups to ensure clearly defined interfaces, deliverables and
schedules are met.
- Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred
McDermott procedures, specifications, standards, practices and operational requirements .
- Participate in finalizing deliverables lists, deliverables and philosophies to ensure compliance with
specifications and functional integrity .
- Review project schedule and fabrication schedule in relation to construction sequence,
milestones,
and design scope.
- Attend project kickoff and review meetings, vendor/supplier meetings, engineering and design
meetings and offshore site surveys as required.
- Research Customer standards and procedures in order to prepare project-specific design procedures
and standards for submission to the Customer for approval.
- Set up and maintain the Discipline Master design drawing and document files.
o 3D model
Develop conceptual layouts based on experience and good offshore engineering practice & develop these
through detail design.
Assist the Lead Designer in supervising the preparation of key Discipline drawings.
Liaise with the responsible Engineers for the timely expediting of Vendor Data to efficiently progress the
project according to schedule requirements.
Review drawings issued by other disciplines and incorporate the required data into Discipline drawings.
Review vendor drawings and documents and incorporate required vendor data into Discipline drawings and
documents.
Assist in providing necessary design inputs to other disciplines to enable them in proceeding with their
deliverables.
Identify all items for which insufficient data is available to allow the drawing or model to be
completed (HOLDS), and list these on the drawing and on the standard 'HOLDS' list form. Notify the
Discipline Lead Designer when there are updates to the Holds list.
Perform design verification through single discipline checks (SOC) and/or inter-discipline checks (IDC),
providing comments to Lead Designer.
Review all project IDC design documentation for detail technical interfaces.
Maintain single discipline and inter-discipline check drawings and filing, including final archiving. Prepare,
issue and update material and weight data take-offs .
Assist Fabrication as required in the resolution of construction difficulties relating to design problems,
clashes, etc.
- Keep Lead Designer apprised of all activities, progress and concerns, including manpower and
budgetary related.
- Assist in providing inputs for actual, planning and forecasting progress reports including associated
productivity.
- Capture lessons learned and enter into MDR's Lessons Learned system.
- Guide less experienced Designers on MDR and Discipline procedures, standards, worksheets, design
calculations, software, technical queries, etc.
- Identify and provide training to staff in specific techniques and proprietary software.
- Provide information on employee performance to the Discipline Supervisor I Engineering Manager.
- Prepare I review and (as Lead Designer) approve Structural Design deliverables such as:
o Seafastening drawings
o Installation/lift drawings
- Review vendor documents and provide comments for structura l support requirements.
- Provide technical guidance to other designers for preparing structural detail drawings.
- Travel to fabrication yard or offshore to provide assistance during fabrication and/or installation, as
required.
o Prepare bid's and project's Discipline design budget and execution plans, updating as required.
o Identify project staff needs based on knowledge of individual designer's skill sets and provide
requests to the Discipline Supervisor I Engineering Manager.
o Plan, organize and assign tasks, responsibilities, and manhour budgets to the Discipline team, and
verify tasks are completed within budgets.
o Plan Discipline Level 4 detail deliverable schedule/ register compliant with the overall execution
plan.
o Supervise and guide assigned Designers for Discipline design and design deliverable s.
o Ensure Designers assigned to the project execute assigned tasks in a consistent manner.
o Prepare working forecasts identifying change management plans, corrective action and real time
schedule.
o Provide Discipline inputs for actual, planning and forecasting progress reports including
associated productivity.
o Alert project team of any deviation from the scope or a need for change order .
o Monitor KPI measurement results, and take corrective action as necessar y to improve
o Coordinate with other disciplines ' Lead Designers to ensure timely receipt of necessary
design inputs.
o Ensure Discipline Designers have sufficient input information for the drawing or model being
undertaken.
o Raise and approve technical queries to obtain missing information, clarify work scope, and to
maintain preferred McDermott procedures, specifications, standards, practices and operational
requirements.
• Schedules
• Execution plans
• Deliverables lists
• Deliverables
• Forecasts
• Estimates
• Procedures
• MTOs
o Review comments from Customers & other agencies on documents and drawings produced by the
team, and resolve and give guidance on their update and incorporation.
o Lead the Discipline team during project audits (internal, Customer and third party technical audits)
and Design Reviews.
o Assist Discipline Supervisor I Engineering Manager in the preparation of quarterly forecasts and
manpower planning.
o Coordinate with representatives from Fabrication and Marine to identify the construction sequence
and preferential design details.
o Ensure Structural item clashes identified in 3D model are addressed and resolved.
o Participate in 3D model reviews, and ensure Structural review comments are closed. o Travel
to fabrication yard or offshore to provide assistance during fabrication
BASIC FUNCTIONS
- Perform conceptual, FEED, Studies, and detailed analyses and
design as per design basis, project specifications, design codes and
standards.
- Apply knowledge and skills to a wide range of standard and
nonstandard situations.
Keep the Lead Engineer apprised of all activities and concerns, technical,
budgetary and manpower related.
Check final subcontractor and vendor data manuals to ensure that all
requested data has been received and approved.
Assist Lead Engineer with responses to Customer and other agencies (such
as certifying authorities, auditors, third parties, etc.) on their review and
approval.
Capture lessons learned and enter into MDR's Lessons Learned system.
Capture Knowledge Objects and enter into MDR's Know system .
Act as a resource for colleagues with less experience.
Guide Jess experienced engineers on MDR and Discipline procedures,
standards, worksheets, design calculations, software, requisitions,
technical bid evaluations, technical queries, etc.
6+ yrs in oil and gas with major contractor or consultant predominantly performing detail design of offshore
facilities
Bachelor Degree in Civil or Structural Engineering (Master Degree is Preferred)
BASIC FUNCTIONS
- Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project
specifications, design codes and standards.
- Apply knowledge and skills to a wide range of standard and nonstandard situations.
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures .
- Manage own time to meet agreed deadlines and budgets, and develop plans for short-term work
activities in own area.
- Clearly communicate and explain complex issues and work to establish understanding.
- Perform detailed engineering and design calculations including analysis of offshore
structures (in- service I pre-service conditions).
- Be fully familiar with the project scope of work, specifications, schedule and all inter-discipline
requirements; including identifying concerns as early as practicable and taking appropriate initiatives to
address the issues.
- Identify changes to scope and promptly raise change notifications, including providing any necessary
supporting documentation and estimates. Provide similar support for Variation Orders.
- Interface with other departments to obtain input for Discipline designs and drawings .
- Maintain close co-ordination with other engineering disciplines, Planning, Fabrication, Marine, and
Project Management Team, as required .
- Assist in preparation of estimates for bid proposals, including technical query reviews, execution
statements and manhour estimates .
- Raise technical queries to obtain missing information, clarify work scope , and to maintain preferred
McDermott procedures , specifications, standards, practices and operational requirements .
- Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.
- Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications
and functional integrity.
- Attend project review meetings, vendor meetings, engineering meetings and offshore site surveys,
as required.
- Provide technical direction and review of Designers producing products related to Structural
Engineering.
- Assist in providing necessary design inputs to other disciplines to enable them in proceeding with
their deliverables.
- Assist procurement personnel in procuring Discipline equipment, materials and services; ensuring
that work produced complies with Customer objectives and procedures . Procurement assistance
includes preparing and reviewing requisitions, evaluating technical quotations and preparing queries,
compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with
Procurement to expedite vendor documents, as directed by Discipline Lead Engineer.
- Review vendor and subcontractor submittals, checking for compliance with project specifications
Keep the Lead Engineer apprised of all activities and concerns, technical, budgetary and manpower related.
Assist in providing inputs for actual, planning and forecasting progress reports including associated
productivity .
Check final subcontractor and vendor data manuals to ensure that all requested data has been received and
approved.
Participate in internal, Customer and third party technical audits on engineering deliverables and vendor
documents.
Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities, auditors,
third parties, etc.) on their review and approval.
Capture lessons learned and enter into MDR's Lessons Learned system. Capture Knowledge Objects and
enter into MDR's Know system .
Act as a resource for colleagues with less experience.
Guide Jess experienced engineers on MDR and Discipline procedures, standards, worksheets, design
calculations, software, requisitions, technical bid evaluations, technical queries, etc.
Provide guidance on preparing structural general arrangements , basic schemes for fabrication and
installation.
Prepare I review design analyses, calculations and procedures for discipline deliverables such as:
o Analyze structures for in-service conditions such as static, fatigue, earthquake, etc.
o Analyze structures for pre-service conditions such as lift analyses, loadout analyses, and
transportation and tiedown analyses.
Review all detailed drawings ensuring technical correctness, professional presentation and that fabrication
and installation requirements are satisfied .
10+ yrs in oil and gas with major contractor or consultant predominantly performing detail design of
offshore facilities
Bachelor Degree in Civil or Structural Engineering (Master Degree is Preferred)
BASIC FUNCTIONS
- Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project
specifications, design codes and standards.
- Apply knowledge and skills to a wide range of standard and nonstandard situations.
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures .
- Manage own time to meet agreed deadlines and budgets, and develop plans for short-term work
activities in own area.
- Clearly communicate and explain complex issues and work to establish understanding.
- Perform detailed engineering and design calculations including analysis of offshore
structures (in- service I pre-service conditions).
- Be fully familiar with the project scope of work, specifications, schedule and all inter-discipline
requirements; including identifying concerns as early as practicable and taking appropriate initiatives to
address the issues.
- Identify changes to scope and promptly raise change notifications, including providing any necessary
supporting documentation and estimates. Provide similar support for Variation Orders.
- Interface with other departments to obtain input for Discipline designs and drawings .
- Maintain close co-ordination with other engineering disciplines, Planning, Fabrication, Marine, and
Project Management Team, as required .
- Assist in preparation of estimates for bid proposals, including technical query reviews, execution
statements and manhour estimates .
- Raise technical queries to obtain missing information, clarify work scope , and to maintain preferred
McDermott procedures , specifications, standards, practices and operational requirements .
- Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.
- Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications
and functional integrity.
- Attend project review meetings, vendor meetings, engineering meetings and offshore site surveys,
as required.
- Provide technical direction and review of Designers producing products related to Structural
Engineering.
- Assist in providing necessary design inputs to other disciplines to enable them in proceeding with
their deliverables.
- Assist procurement personnel in procuring Discipline equipment, materials and services; ensuring
that work produced complies with Customer objectives and procedures . Procurement assistance
includes preparing and reviewing requisitions, evaluating technical quotations and preparing queries,
compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with
Procurement to expedite vendor documents, as directed by Discipline Lead Engineer.
Keep the Lead Engineer apprised of all activities and concerns, technical, budgetary and manpower related.
Assist in providing inputs for actual, planning and forecasting progress reports including associated
productivity .
Check final subcontractor and vendor data manuals to ensure that all requested data has been received and
approved.
Participate in internal, Customer and third party technical audits on engineering deliverables and vendor
documents.
Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities, auditors,
third parties, etc.) on their review and approval.
Capture lessons learned and enter into MDR's Lessons Learned system. Capture Knowledge Objects and
enter into MDR's Know system .
Act as a resource for colleagues with less experience.
Guide Jess experienced engineers on MDR and Discipline procedures, standards, worksheets, design
calculations, software, requisitions, technical bid evaluations, technical queries, etc.
Provide guidance on preparing structural general arrangements , basic schemes for fabrication and
installation.
Prepare I review design analyses, calculations and procedures for discipline deliverables such as:
o Analyze structures for in-service conditions such as static, fatigue, earthquake, etc.
o Analyze structures for pre-service conditions such as lift analyses, loadout analyses, and
transportation and tiedown analyses.
Review all detailed drawings ensuring technical correctness, professional presentation and that fabrication
and installation requirements are satisfied .
EDUCATION
BASIC FUNCTIONS
- Perform conceptual, FEED, and detailed analyses and design as per
design basis, project
specifications, design codes and standards .
- Apply in-depth skills and broad knowledge of the business to
address complex problems and
nonstandard situations.
- Prepare clear and accurate detailed design calculations and
analyses including design reports and
procedures.
- Manage own time to meet objectives, and (as Lead Engineer)
forecast and plan resource
requirements.
- Clearly communicate and explain difficult concepts and persuade
others to adopt a point of view.
- Perform detailed engineering and design calculations including
analysis of offshore structures_{in- service I pre-service conditions).
- Review and (as Lead Engineer) approve the project Weight Control
Report, ensuring technical quality, professional presentation and that
Fabrication and installation requirements are employed.
o Alert project team of any deviation from the scope or a need for
change order.
3 - 5+ yrs in oil and gas with major contractor or consultant predominantly performing detail design of
offshore facilities
Bachelor Degree in Mechanical Engineering or in similar Engineering field
BASIC FUNCTIONS
- Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis,
project specifications, design codes and standards.
- Apply knowledge and skills to a wide range of standard and nonstandard situations.
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
- Manage own time to meet agreed deadlines and budgets, and develop plans for short-term work
activities in own area.
- Clearly communicate and explain complex issues and work to establish understanding.
- Interface with other departments to obtain input for Discipline designs and drawings.
- Maintain close co-ordination with other engineering disciplines, Planning, Fabrication, Marine, and
Project Management Team, as required.
- Assist in preparation of estimates for bid proposals, including technical query reviews, execution
statements and manhour estimates.
- Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred
McDermott procedures, specifications , standards , practices and operational requirements .
- Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.
- Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications
and functional integrity.
- Attend project review meetings, vendor meetings, engineering meetings and offshore site surveys,
as required.
- Provide technical direction and review of Designers producing products related to Piping
Engineering.
- Assist in providing necessary design inputs to other disciplines to enable them in proceeding with
their deliverables.
- Assist procurement personnel in procuring Discipline equipment, materials and services; ensuring
that work produced complies with Customer objectives and procedures. Procurement assistance includes
preparing and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid
tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to
expedite vendor documents, as directed by Discipline Lead Engineer .
- Review vendor and subcontractor submittals, checking for compliance with project specifications
and providing comments as necessary.
- Keep the Lead Engineer apprised of all activities and concerns, technical, budgetary and manpower
related.
- Assist in providing inputs for actual, planning and forecasting progress reports including associated
productivity.
- Check final subcontractor and vendor data manuals to ensure that all requested data has been
received and approved.
- Participate in internal, Customer and third party technical audits on engineering deliverables and
vendor documents .
- Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities,
auditors, third parties, etc.) on their review and approval.
- Capture lessons learned and enter into MDR's Lessons Learned system.
- Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design
calculations, software, requisitions, technical bid evaluations, technical queries, etc.
- Become fully familiar with P&ID, Line List, Equipment Layouts, Piping Specifications, and Design
Basis.
- Prepare I Review Special Piping Items List and required piping and valve specifications and
datasheets.
- Review P&ID with reference to Piping Material and Valve specification and mark-up Master P&ID.
- Provide critical pipe support loads to Structural Engineering Lead for structural design I verification.
- Prepare I Review Material Requisitions, Technical Queries, Technical Bid Evaluations and Purchase
Requisitions for Engineered Piping Equipment including Valves, SP Items, Piping Bulks, Spring supports,
Access fittings, etc.
6+ yrs in oil and gas with major contractor or consultant predominantly performing detail design of offshore
facilities
Bachelor Degree in Mechanical Engineering or in similar Engineering field
BASIC FUNCTIONS
- Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis,
project specifications, design codes and standards.
- Apply knowledge and skills to a wide range of standard and nonstandard situations.
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
- Manage own time to meet agreed deadlines and budgets, and develop plans for short-term work
activities in own area.
- Clearly communicate and explain complex issues and work to establish understanding.
TASKS & RESPONSIBILITIES
- Be fully familiar with the project scope of work, specifications, schedule and all inter-
discipline requirements; including identifying concerns as early as practicable and taking appropriate
initiatives to address the issues.
- Identify changes to scope and promptly raise change notifications, including providing any
necessary supporting documentation and estimates. Provide similar support for Variation Orders.
- Interface with other departments to obtain input for Discipline designs and drawings.
- Maintain close co-ordination with other engineering disciplines, Planning, Fabrication, Marine, and
Project Management Team, as required.
- Assist in preparation of estimates for bid proposals, including technical query reviews, execution
statements and manhour estimates.
- Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred
McDermott procedures, specifications , standards , practices and operational requirements .
- Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.
- Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications
and functional integrity.
- Attend project review meetings, vendor meetings, engineering meetings and offshore site surveys,
as required.
- Provide technical direction and review of Designers producing products related to Piping
Engineering.
- Assist in providing necessary design inputs to other disciplines to enable them in proceeding with
their deliverables.
- Assist procurement personnel in procuring Discipline equipment, materials and services; ensuring
that work produced complies with Customer objectives and procedures. Procurement assistance includes
preparing and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid
tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to
expedite vendor documents, as directed by Discipline Lead Engineer .
- Review vendor and subcontractor submittals, checking for compliance with project specifications
and providing comments as necessary.
- Keep the Lead Engineer apprised of all activities and concerns, technical, budgetary and manpower
related.
- Assist in providing inputs for actual, planning and forecasting progress reports including associated
productivity.
- Check final subcontractor and vendor data manuals to ensure that all requested data has been
received and approved.
- Participate in internal, Customer and third party technical audits on engineering deliverables and
vendor documents .
- Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities,
auditors, third parties, etc.) on their review and approval.
- Capture lessons learned and enter into MDR's Lessons Learned system.
- Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design
calculations, software, requisitions, technical bid evaluations, technical queries, etc.
- Become fully familiar with P&ID, Line List, Equipment Layouts, Piping Specifications, and Design
Basis.
- Prepare I Review Special Piping Items List and required piping and valve specifications and
datasheets.
- Review P&ID with reference to Piping Material and Valve specification and mark-up Master P&ID.
- Provide critical pipe support loads to Structural Engineering Lead for structural design I verification.
- Review Piping MTO with respect to Material Requisitions and Project requirements.
- Prepare I Review Material Requisitions, Technical Queries, Technical Bid Evaluations and Purchase
Requisitions for Engineered Piping Equipment including Valves, SP Items, Piping Bulks, Spring supports,
Access fittings, etc.
BASIC FUNCTIONS
- Perform detailed design engineering, analysis and calculations on basic engineering tasks.
- Apply knowledge and skills to complete routine assignments under close supervision and mentoring.
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
- Organize own work to meet deadlines set by others.
- Clearly communicate information, asking questions and checking for understanding.
TASKS & RESPONSIBILITIES
- Gain an understanding of the project scope of work , specifications , schedule and all inter-discipline
requirements.
- Prepare sketches of detail design to guide Designers.
- Review MTOs for requisitions.
- Check drawings.
- Keep the Lead Engineer apprised of all activities, progress and concerns.
- Develop an awareness of costs related to own work.
- Develop basic understanding of MDR's business and customers it serves.
- Develop basic knowledge of MDR's business units and interactions including engineering,
fabrication, and marine functions.
- Develop advanced skills in use of standard productivity tools such as Microsoft Word, Excel, and
PowerPoint.
3+ yrs in oil and gas with major contractor or Bachelor Degree in Mechanical Engineering or in consultant
predominantly performing detail design of similar Engineering field
offshore facilities (Master Degree is Preferred)
GENERAL PROFILE
-
SUPERVISES: OTHER
LIAISE WITH: All design I drafting disciplines, all Engineering disciplines, Fabrication group and Document
Control.
BASIC FUNCTIONS
- Perform FEED, Studies, and detailed design engineering, analysis and calculations on more complex
and demanding engineering tasks.
- Apply knowledge and skills to complete varied assignments.
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
- Prioritize and organize own work to meet deadlines.
- Focus on completing work within budgets.
- Clearly communicate and explain information in straightforward engineering activities.
- Gain familiarity with the project scope of work, specifications, schedule and all inter-discipline
requirements; including identifying concerns as early as practicable.
- Recognize changes to scope and notify the Discipline Lead Engineer.
- Interface with all disciplines to develop clash free designs.
- Interface with other departments to obtain input for Discipline designs and drawin
- Document substantive communications (communications that result in significant decisions or
assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager .
- Check drawings.
- Review vendor and subcontractor submittals, checking for compliance with project specifications
and providing comments as necessary.
- Perform design verification through single-discipline check and assist with inter-discipline checks
(IDC).
- Keep the Lead Engineer apprised of all activities, progress and concerns .
- Check final subcontractor and vendor data manuals to ensure that all requested data has been
received and approved .
- Capture lessons learned and enter into MDR's Lessons Learned system.
- Review P & IDs, plot plans and structural supporting details with reference to vendor drawings and
details.
10+ yrs in oil and gas with major contractor or consultant predominantly performing detail design of
offshore facilities
Bachelor Degree in Chemical, Electrical , or Electronics and Instrumentation Engineering
Senior Automation & Instrumentation Engineers and Automation & Instrumentation Engineers
Preferably Registered Professional Engineer or member of professional engineering society
LIAISE WITH:
All Engineering disciplines, Fabrication Group, Safety Dept, Offshore Group, Project Management Team,
Document Control , Project Planner, Project Cost Controller, QC and Certification Group, Procurement
Group, Subcontractors and Vendors, and Customers.
BASIC FUNCTIONS
- Perform conceptual, FEED, and detailed analyses and design as per design basis, project
specifications, design codes and standards.
- Apply in-depth skills and broad knowledge of the business to address complex problems and
nonstandard situations .
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
- Manage own time to meet objectives , and (as Lead Engineer) forecast and plan resource
requirements.
- Clearly communicate and explain difficult concepts and persuade others to adopt a point of view.
- When acting as Lead Engineer, in addition:
0 Direct small or medium Automation & Instrumentation Engineering team as a Lead Engineer.
1. Lead the Discipline engineering design of the assigned work area and complete within
planned schedule and budget, in accordance with standards, MDR and project-specific
procedures and to a high professional standard.
Become fully familiar with the project scope of work, specifications, schedule and all inter-
discipline requirements; including identifying concerns as early as practicable and taking
appropriate initiatives to address the issues. Interpret contractual requirements as they
relate to engineering execution .
Identify changes to scope and promptly raise change notifications, including providing any
necessary supporting documentation and estimates. Provide similar support for Variation
Orders.
Interface with other departments to obtain input for Discipline designs and drawings.
Prepare estimates for bid proposals, including technical query reviews, execution
statements and manhour estimates, identifying software requirements and any other
project-specific requirements .
Raise technical queries to obtain missing information, clarify work scope, and to maintain
preferred McDermott procedures, specifications, standards, practices and operational
requirements.
Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis,
philosophies, and technical specifications.
Attend project kickoff and review meetings, vendor meetings, engineering meetings and
offshore site surveys, as required.
Instrumentation Engineering.
Prepare, review, and (as Lead Engineer) approve design reports and procedures .
their deliverables.
Review and (as Lead Engineer) approve design verification through single-discipline check
I inter
Keep the Discipline Manager and Project Management Team apprised of all activities and
concerns, technical, budgetary and manpower related.
Assist in providing inputs for actual, planning and forecasting progress reports including
associated productivity.
Check final subcontractor and vendor data manuals to ensure that all requested data has
been received and approved.
Present issues and problems to Customers in a timely manner and assist Lead Engineer in
negotiating resolution in accordance with project and company requirements.
Perform (as required) Technical Quality Audit reviews in accordance with MDR Global
Procedures. Assist Lead Engineer with responses to Customer and other agencies (such
as certifying authorities ,
Capture lessons learned and enter into MDR's Lessons Learned system. Capture
Knowledge Objects and enter into MDR's K.now system .
design calculations, software, requisitions, technical bid evaluations, technical queries, etc.
Supervise and guide assigned engineers and coordinate with project Lead Designers for
Discipline engineering and design deliverables.
- Identify and provide training to staff in specific techniques and proprietary software
.
- Prepare, review, and (as Lead Engineer) approve automation system definition,
including philosophy, specifications, safety drawings, and system architecture.
- Prepare, review, and (as Lead Engineer) approve ESD logic (as applicable)/cause-
&-effect diagrams and F&G logic (as applicable)/cause-&-effect diagrams.
Review and (as Lead Engineer) approve specifications and data sheets for Automation and
Instrumentation equipment.
Review and (as Lead Engineer) approve A&l equipment spare parts lists.
Review and (as Lead Engineer) approve inputs to P&ID development and markups based
on receipt of vendor information .
Review and (as Lead Engineer) approve A&l equipment testing procedures. Attend A&l
equipment FATs, as required.
Participate in HAZOP, SIL, and Classification Studies, as required. Assist in close out of
HAZOP action items.
o Prepare bid's and project's Discipline engineering budget and execution plans,
updating as
required.
Identify project staff needs based on knowledge of individual engineer's skill sets and
o Plan, organize and assign tasks, responsibilities, and manhour budgets to the
discipline team, and verify tasks are completed within budgets.
o Plan Discipline Level 4 detail deliverable schedule/ register compliant with the
overall execution plan.
o Provide Discipline inputs for actual, planning and forecasting progress reports
including associated productivity.
o Alert project team of any deviation from the scope or a need for change order .
o Coordinate with other Discipline Lead Engineers and Designers to ensure timely
receipt of necessary design inputs.
o Lead the Discipline team during project audits (internal, Customer and third party
technical audits) and Design Reviews.
o Review comments from Customers & other agencies on documents and drawings
produced by the team, and resolve and give guidance on their update and incorporation.
6+ yrs in oil and gas with major contractor or consultant predominantly performing detail design of offshore
facilities
Bachelor Degree in Chemical, Electrical, or Electronics and Instrumentation Engineering
REPORTS TO:
Project: Lead Engineer
LIAISE WITH:
All Engineering disciplines, Fabrication Group, Safety Dept, Offshore Group, Document Control,
Procurement Group, Subcontractors and Vendors, and Customers.
BASIC FUNCTIONS
- Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis,
project specifications, design codes and standards.
- Apply knowledge and skills to a wide range of standard and nonstandard situations.
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
- Manage own time to meet agreed deadlines and budgets, and develop plans for short-term
work activities in own area.
- Clearly communicate and explain complex issues and work to establish understanding.
TASKS & RESPONSIBILITIES
- Be fully familiar with the project scope of work, specifications, schedule and all inter-
discipline requirements; including identifying concerns as early as practicable and taking appropriate
initiatives to address the issues.
- Identify changes to scope and promptly raise change notifications, including providing any
necessary supporting documentation and estimates. Provide similar support for Variation Orders .
- Interface with all disciplines to develop clash free designs.
- Interface with other departments to obtain input for Discipline designs and drawings.
- Maintain close co-ordination with other engineering disciplines, Planning, Fabrication, Marine, and
Project Management Team, as required.
- Assist in preparation of estimates for bid proposals, including technical query reviews , execution
statements and manhour estimates.
- Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred
McDermott procedures, specifications, standards, practices and operational requirements.
- Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.
- Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications
and functional integrity.
- Attend project review meetings, vendor meetings, engineering meetings and offshore site surveys,
as required.
- Provide technical direction and review of Designers producing products related to Automation &
Instrumentation Engineering.
- Assist procurement personnel in procuring Discipline equipment, materials and services; ensuring
that work produced complies with Customer objectives and procedures. Procurement assistance includes
preparing and reviewing requisitions , evaluating technical quotations and preparing queries, compiling bid
tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to
expedite vendor documents, as directed by Discipline Lead Engineer .
- Review vendor and subcontractor submittals, checking for compliance with project specifications
and providing comments as necessary.
- Provide technical support to all fabrication queries, including identifying defect I rectification
requirements.
- Keep the Lead Engineer apprised of all activities and concerns, technical, budgetary and manpower
related.
Assist in providing inputs for actual, planning and forecasting progress reports including associated
productivity .
Check final subcontractor and vendor data manuals to ensure that all requested data has been received and
approved.
Participate in internal, Customer and third party technical audits on engineering deliverables and vendor
documents.
Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities, auditors,
third parties, etc.) on their review and approval.
Capture lessons learned and enter into MDR's Lessons Learned system. Capture Knowledge Objects and
enter into MDR's K.now system.
Act as a resource for colleagues with less experience.
Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design
calculations, software, requisitions, technical bid evaluations, technical queries, etc.
Prepare I review automation system definition, including philosophy, specifications, safety drawings, and
system architecture.
Prepare I review ESD logic (as applicable)lcause-&-effect diagrams and F&G logic (as applicable )lcause-&-
effect diagrams .
Prepare I update I review specifications and data sheets for Automation and Instrumentation equipment.
REPORTS TO:
Project: Lead Engineer
BASIC FUNCTIONS
- Perform detailed design engineering, analysis and calculations on basic engineering tasks .
- Apply knowledge and skills to complete routine assignments under close supervision and mentoring.
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
- Gain an understanding of the project scope of work, specifications, schedule and all inter-discipline
requirements.
- Check drawings.
- Keep the Lead Engineer apprised of all activities, progress and concerns.
- Develop advanced skills in use of standard productivity tools such as Microsoft Word, Excel, and
PowerPoint
6+ yrs in oil and gas with major contractor or consultant predominantly performing detail design of offshore
facilities
Bachelor Degree in Chemical Engineering (Master Degree is Preferred)
BASIC FUNCTIONS
- Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project
specifications, design codes and standards.
- Apply knowledge and skills to a wide range of standard and nonstandard situations.
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
- Manage own time to meet agreed deadlines and budgets, and develop plans for short-term work
activities in own area.
- Clearly communicate and explain complex issues and work to establish understanding.
- Be fully familiar with the project scope of work, specifications, schedule and all inter-discipline
requirements; including identifying concerns as early as practicable and taking appropriate initiatives
to address the issues.
- Identify changes to scope and promptly raise change notifications, including providing any
necessary supporting documentation and estimates. Provide similar support for Variation Orders .
Interface with all disciplines to develop clash free designs.
Interface with other departments to obtain input for Discipline designs and drawings.
Maintain close co-ordination with other engineering disciplines, Planning, Fabrication, Marine, and Project
Management Team, as required .
Assist in preparation of estimates for bid proposals, including technical query reviews, execution statements
and manhour estimates.
Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred
McDermott procedures, specifications, standards, practices and operational requirements.
Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.
Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and
functional integrity.
- Attend project review meetings, vendor meetings, engineering meetings and offshore site surveys,
as required.
- Provide technical direction and review of Designers producing products related to Process
Engineering .
- Assist in providing necessary design inputs to other disciplines to enable them in proceeding with
their deliverables.
- Assist procurement personnel in procuring Discipline equipment, materials and services; ensuring
that work produced complies with Customer objectives and procedures. Procurement assistance includes
preparing and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid
tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to
expedite vendor documents, as directed by Discipline Lead Engineer.
- Provide technical support to all fabrication queries, including identifying defect I rectification
requirements.
- Keep the Lead Engineer apprised of all activities and concerns, technical, budgetary and manpower
related.
Assist in providing inputs for actual, planning and forecasting progress reports including associated
productivity.
Check final subcontractor and vendor data manuals to ensure that all requested data has been received and
approved.
Participate in internal, Customer and third party technical audits on engineering deliverables and vendor
documents .
Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities, auditors,
third parties, etc.) on their review and approval.
Capture lessons learned and enter into MDR's Lessons Learned system. Capture Knowledge Objects and
enter into MDR's K.now system.
Act as a resource for colleagues with less experience.
Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design
calculations, software, requisitions, technical bid evaluations, technical queries, etc.
Responsible for preparing I checking the following key deliverables, applicable as per the Project scope:
o Process simulations I heat and material balance.
o SAFE charts.
o Process specifications.
o Process studies.
Review process information in supplier/vendor data for conformance with project requirements.
0 Layout review
0 Safety studies
0 Equipment datasheets
0 Instrument datasheets
14+ yrs in oil and gas with major contractor or consultant predominantly performing detail design of
offshore facilities
Bachelor Degree in Chemical Engineering (Master Degree is Preferred)
BASIC FUNCTIONS
- Perform conceptual, FEED, and detailed analyses and design as per design basis, project
specifications, design codes and standards.
- Develop creative and innovative solutions that are reliable and cost-effective for problems and
challenges when they arise.
- Clearly communicate and explain highly complex ideas and anticipate potential objections;
influencing outcomes.
o Lead the Discipline engineering design of the assigned work area and complete within planned
schedule and budget, in accordance with standards, MDR and project-specific procedures and to a high
professional standard.
o Plan, organize and direct all aspects of Discipline execution on the assigned project including scope,
deliverables, schedule and all manpower resources - agree allocations with the Discipline Manager.
o Maintain responsibility for progress and productivity, identifying any required corrective action.
o Act as project representative for the Discipline during meetings with Project Team, Customer
discipline lead and relevant agencies such as certifying authorities, auditors, third parties, etc.
Become fully familiar with the project scope of work, specifications, schedule and all inter-discipline
requirements; including identifying concerns as early as practicable and taking appropriate initiatives to
address the issues. Interpret contractual requirements as they relate to engineering execution.
Identify changes to scope and promptly raise change notifications, including providing any necessary
supporting documentation and estimates. Provide similar support for Variation Orders.
Interface with other departments to obtain input for Discipline designs and drawings.
Maintain close co-ordination with other engineering disciplines, Planning, Fabrication, Marine, and Project
Management Team, as required.
Prepare estimates for bid proposals, including technical query reviews, execution statements and manhour
estimates, identifying software requirements and any other project-specific requirements .
Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred
McDermott procedures, specifications, standards, practices and operational requirements.
Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and
technical specifications.
Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and
functional integrity.
Review project schedule and fabrication schedule in relation to construction sequence, milestones, and
engineering scope .
- Attend project kickoff and review meetings, vendor meetings, engineering meetings and offshore
site surveys, as required.
- Provide technical direction and review of Designers producing products related to Process
Engineering.
- Prepare, review, and (as Lead Engineer) approve design reports and procedures .
- Assist in providing necessary design inputs to other disciplines to enable them in proceeding with
their deliverables.
- Assist procurement personnel in procuring Discipline equipment, materials and services; ensuring
that work produced complies with Customer objectives and procedures. Procurement assistance includes
preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations and
preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and
coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer .
- Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for
compliance with project specifications and providing comments as necessary.
- Review and (as Lead Engineer) approve design verification through single-discipline check I inter
discipline check (IDC).
- Keep the Discipline Manager and Project Management Team apprised of all activities and concerns,
technical, budgetary and manpower related.
- Assist in providing inputs for actual, planning and forecasting progress reports including associated
productivity.
- Check final subcontractor and vendor data manuals to ensure that all requested data has been
received and approved .
- Present issues and problems to Customers in a timely manner and assist Lead Engineer in
negotiating resolution in accordance with project and company requirements.
- Perform (as required) Technical Quality Audit reviews in accordance with MDR Global Procedures.
- Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities,
auditors, third parties, etc.) on their review and approval.
- Capture lessons learned and enter into MDR's Lessons Learned system.
- Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline
engineering and design deliverables .
- Assign personnel to analysis and design tasks based on knowledge of individual strengths and
capabilities.
- Assist in the maintenance of departmental technical guidelines and standard calculation notes.
- Incorporate approved Lessons Learned into MDR Level 2 & 3 engineering procedures, as applicable.
- Recognized as having good communication and presentation skills (e.g., published technical papers
are clearly written, actively participates in conferences and/or seminars, and/or is a capable presenter of
design solutions or topics at "lunch and learns"; etc.).
- Participate in McDermott forums and represent McDermott as a subject matter expert (SME).
- Responsible for checking the following key deliverables, applicable as per the Project scope:
o SAFE charts.
o Process specifications.
associated productivity.
o Alert project team of any deviation from the scope or a need for change order .
o Monitor KPI measurement results, and take corrective action as necessary to improve Discipline
performance, including performance at interfaces with others .
o Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of
necessary design inputs.
o Review and approve requisitions, technical quotation evaluations and queries, compiled bid
tabulations and recommendations, and purchase requisitions; and coordinate with Procurement to expedite
vendor documents as required.
o Lead the Discipline team during project audits (internal, Customer and third party technical
audits) and Design Reviews.
o Review comments from Customers & other agencies on documents and drawings produced by the
team, and resolve and give guidance on their update and incorporation.
o Assist Discipline manager in the preparation of quarterly forecasts and manpower planning.
o Anticipate project engineering needs and plan accordingly.
o Coordinate with vendor for discipline managed/procured items.
o Assist Discipline manager and Project Engineering Manager or Project Manager in Performance
Evaluation of project team members.
o Responsible for checking and approving the following key deliverables , applicable as per the Project
scope:
• SAFE charts.
• Process specifications.
• Fluid lists.
• Process studies .
3+ yrs in oil and gas with major contractor or consultant predominantly performing detail design of offshore
facilities
BASIC FUNCTIONS -·
- Perform FEED, Studies, and detailed design engineering, analysis and calculations on more complex
and demanding engineering tasks.
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
- Prioritize and organize own work to meet deadlines.
- Gain familiarity with the project scope of work, specifications, schedule and all inter-discipline
requirements; including identifying concerns as early as practicable.
- Interface with other departments to obtain input for Discipline designs and drawings.
- Document substantive communications (communications that result in significant decisions or
assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager.
- Check drawings .
- Review vendor and subcontractor submittals, checking for compliance with project specifications
and providing comments as necessary.
- Perform design verification through single-discipline check and assist with inter-discipline checks
(IDC).
- Keep the Lead Engineer apprised of all activities, progress and concerns.
- Check final subcontractor and vendor data manuals to ensure that all requested data has been
received and approved.
- Capture lessons learned and enter into MDR's Lessons Learned system .
o Material takeoffs
- Perform the following designs, analyses and evaluations for pipelines and their components:
0 Free-span analyses
0 Pipeline expansion and rigid riser stress analyses using finite element analysis
(FEA) tools
0 Clamp designs
0 Subsea structure designs
0 Installation analyses
6+ yrs in oil and gas with major contractor or consultant predominantly performing detail design of offshore
facilities
Bachelor Degree in Civil, Structural, Mechanical, or Marine Engineering; or Naval Architecture
BASIC FUNCTIONS
- Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project
specifications, design codes and standards .
- Apply knowledge and skills to a wide range of standard and nonstandard situations.
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
- Manage own time to meet agreed deadlines and budgets, and develop plans for short-term
work activities in own area.
- Clearly communicate and explain complex issues and work to establish understanding.
TASKS & RESPONSIBILITIES
- Be fully familiar with the project scope of work, specifications, schedule and all inter-discipline
requirements; including identifying concerns as early as practicable and taking appropriate initiatives to
address the issues.
- Identify changes to scope and promptly raise change notifications, including providing any necessary
supporting documentation and estimates . Provide similar support for Variation Orders.
Interface with other departments to obtain input for Discipline designs and drawings.
Maintain close co-ordination with other engineering disciplines, Planning, Fabrication, Marine, and Project
Management Team, as required.
Assist in preparation of estimates for bid proposals, including technical query reviews, execution statements
and manhour estimates.
Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred
McDermott procedures, specifications, standards, practices and operational requirements.
Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.
Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications
and functional integrity.
Attend project review meetings, vendor meetings, engineering meetings and offshore site surveys, as
required.
Provide technical direction and review of Designers producing products related to Pipeline Engineering.
Assist in providing necessary design inputs to other disciplines to enable them in proceeding with their
deliverables.
Assist procurement personnel in procuring Discipline equipment, materials and services; ensuring that work
produced complies with Customer objectives and procedures. Procurement assistance includes preparing
and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations
and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite
vendor documents, as directed by Discipline Lead Engineer .
Review vendor and subcontractor submittals, checking for compliance with project specifications and
providing comments as necessary.
Perform design verification through single-discipline check I inter-discipline check (IDC). Provide technical
support to all fabrication queries, including identifying defect I rectification
requirements.
Keep the Lead Engineer apprised of all activities and concerns, technical, budgetary and manpower related.
- Assist in providing inputs for actual, planning and forecasting progress reports including associated
productivity .
- Check final subcontractor and vendor data manuals to ensure that all requested data has been
received and approved.
- Participate in internal, Customer and third party technical audits on engineering deliverables and
vendor documents .
- Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities,
auditors, third parties, etc.) on their review and approval.
- Capture lessons learned and enter into MDR's Lessons Learned system.
- Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design
calculations, software, requisitions, technical bid evaluations, technical queries, etc.
- Prepare I review the following for pipelines and their components : o Material specifications and
datasheets.
o Fabrication specifications
o Installation specifications.
o Material takeoffs
- Perform I review the following designs, analyses and evaluations for pipelines and their
components:
o Free-span analyses
o Pipeline expansion and rigid riser stress analyses using finite element analysis (FEA) tools
0 Clamp designs
0 Installation analyses
10+ yrs in oil and gas with major contractor or consultant predominantly performing detail design of
offshore facilities
Bachelor Degree in Civil, Structural, Mechanical, or Marine Engineering; or Naval Architecture
BASIC FUNCTIONS
- Perform conceptual, FEED, and detailed analyses and design as per design basis, project
specifications, design codes and standards.
- Apply in-depth skills and broad knowledge of the business to address complex problems and
nonstandard situations.
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
- Manage own time to meet objectives, and (as Lead Engineer) forecast and plan resource
requirements.
- Clearly communicate and explain difficult concepts and persuade others to adopt a point of view.
o Lead the Discipline engineering design of the assigned work area and complete within planned
schedule and budget, in accordance with standards, MDR and project-specific
procedures and to a high professional standard.
o Plan, organize and direct all aspects of Discipline execution on the assigned project including scope,
deliverables, schedule and all manpower resources - agree allocations with the Discipline Manager.
o Maintain responsibility for progress and productivity, identifying any required corrective action.
Act as project representative for the Discipline during meetings with Project Team, Customer discipline lead
and relevant agencies such as certifying authorities, auditors, third parties, etc.
- Become fully familiar with the project scope of work, specifications, schedule and all inter-discipline
requirements; including identifying concerns as early as practicable and taking appropriate initiatives to
address the issues. Interpret contractual requirements as they relate to engineering execution.
- Identify changes to scope and promptly raise change notifications, including providing any necessary
supporting documentation and estimates. Provide similar support for Variation Orders .
Interface with other departments to obtain input for Discipline designs and drawings.
Maintain close co-ordination with other engineering disciplines, Planning, Fabrication, Marine, and Project
Management Team, as required.
Prepare estimates for bid proposals, including technical query reviews, execution statements and manhour
estimates, identifying software requirements and any other project-specific requirements .
Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred
McDermott procedures, specifications, standards, practices and operational requirements.
Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and
technical specifications.
Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and
functional integrity.
Review project schedule and fabrication schedule in relation to construction sequence, milestones, and
engineering scope.
Attend project kickoff and review meetings, vendor meetings, engineering meetings and offshore site
surveys, as required.
Provide technical direction and review of Designers producing products related to PiQ_eline
Prepare, review, and (as Lead Engineer) approve design reports and procedures.
Assist in providing necessary design inputs to other disciplines to enable them in proceeding with their
deliverables.
Assist procurement personnel in procuring Discipline equipment, materials and services; ensuring that work
produced complies with Customer objectives and procedures . Procurement assistance includes preparing,
reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations and preparing
queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating
with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer.
Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with
project specifications and providing comments as necessary.
Review and (as Lead Engineer) approve design verification through single-discipline check I inter discipline
check (IDC).
Provide technical support to fabrication queries, including identifying defect I rectification requirements.
Keep the Discipline Manager and Project Management Team apprised of all activities and concerns,
technical, budgetary and manpower related.
Assist in providing inputs for actual, planning and forecasting progress reports including associated
productivity.
Check final subcontractor and vendor data manuals to ensure that all requested data has been received and
approved .
Present issues and problems to Customers in a timely manner and assist Lead Engineer in negotiating
resolution in accordance with project and company requirements.
Perform (as required) Technical Quality Audit reviews in accordance with MDR Global Procedures. Assist
Lead Engineer with responses to Customer and other agencies (such as certifying authorities,
auditors, third parties, etc.) on their review and approval.
Capture lessons learned and enter into MDR's Lessons Learned system. Capture Knowledge Objects and
enter into MDR's K.now system.
Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design
calculations, software, requisitions, technical bid evaluations, technical queries, etc.
Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline
engineering and design deliverables.
Responsible for the engineering integrity of the assigned work area
- Assist in the maintenance of departmental technical guidelines and standard calculation notes.
- Develop communication and presentation skills (e.g., write technical papers, participate in
conferences and/or seminars, present design solutions, and/or present topics at "lunch and learns"; etc.).
- Identify and provide training to staff in specific techniques and proprietary software.
- Prepare, review, and (as Lead Engineer) approve the following for pipelines and their components:
0 Fabrication specifications
0 Installation specifications.
0 Material takeoffs
- Perform, review, and (as Lead Engineer) approve the following designs, analyses and evaluations for
pipelines and their components:
o Free-span analyses
o Pipeline expansion and rigid riser stress analyses using finite element analysis (FEA) tools
3+ yrs in oil and gas with major contractor or consultant Bachelor Degree in Civil, Structural, Marine, or Mechanical
Engineering; or Naval Architecture
predominantly performing detail design of offshore facilities
(Master Degree is Preferred)
REPORTS TO: GENERAL PROFILE
Functional: Supervising Engineer or Engineering Manager guidelines as applicable for offshore. Knowledge of many basic
designtechniques and analysis methods.
SUPERVISES: OTHER
LIAISE WITH: All design I drafting disciplines, all Engineering disciplines, Fabrication group and Document Control.
BASIC FUNCTIONS
Perform FEED, Studies, and detailed design engineering, analysis and calculations on more complex and demanding
engineering tasks.
Apply knowledge and skills to complete varied assignments.
- Prepare clear and accurate detailed design calculations and analyses including design reports and procedures.
- Prioritize and organize own work to meet deadlines.
- Focus on completing work within budgets.
Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to
Discipline Lead Engineer and Discipline Manager.
Procurement assistance includes preparing requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and
recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline
LeadEngineer.
Check drawings .
Review vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.
Perform design verification through single-discipline check and assist with inter-discipline checks (IDC).
Keep the Lead Engineer apprised of all activities, progress and concerns .
Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved.
Capture lessons learned and enter into MDR's Lessons Learned system.
Perform Pipeline Installation Engineering designs, analyses, evaluations, calculations and procedures for transporting and installing (including
installation aids):
Submarine pipelines
Risers
Spools
Cables
- Perform Structural Installation Engineering designs, analyses, evaluations, calculations and procedures for loadout, transportation, and
installation (including installation aids) of offshore structures, including barge upgrades/modifications
Principal Installation Engineer - (1900607)
10+ yrs in oil and gas with major contractor or Bachelor Degree in Civil, Structural, Marine, or consultant
predominantly performing detail design of Mechanical Engineering; or Naval Architecture offshore
facilities (Master Degree is Preferred)
GENERAL PROFILE
Project: Lead Engineer, Project Engineering Detailed knowledge of design techniques and Manager or
Project Manager analysis methods , and detailed knowledge of the
theory, content and application of standards , codes
Functional: Supervising Engineer or Engineering and guidelines as applicable for offshore.
Manager Knowledgeable in project coordination and execution skills .
SUPERVISES: OTHER
Senior Installation Support Engineers and Installation Preferably Registered Professional Engineer or
Support Engineers member of professional engineering society
BASIC FUNCTIONS
- Perform conceptual, FEED, and detailed analyses and design as per design basis, project
specifications, design codes and standards.
- Apply in-depth skills and broad knowledge of the business to address complex problems and
nonstandard situations .
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
- Manage own time to meet objectives, and (as Lead Engineer) forecast and plan resource
requirements.
- Clearly communicate and explain difficult concepts and persuade others to adopt a point of view.
- When acting as Lead Engineer, in addition:
0 Direct small or medium Installation Support Engineering team as a Lead Engineer.
0 Lead the Discipline engineering design of the assigned work area and complete within
( planned schedule and budget, in accordance with standards, MDR and project-specific
BASIC FUNCTIONS
- Perform detailed design engineering, analysis and calculations on basic engineering tasks.
- Apply knowledge and skills to complete routine assignments under close supervision and
mentoring.
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
- Organize own work to meet deadlines set by others.
- Clearly communicate information, asking questions and checking for understanding.
- Gain understanding of the design and analysis processes used within Structural Engineering . Gain
working knowledge and proficiency in some of the basic processes.
- Gain understanding of the structural steel materials used in offshore design.
- Gain understanding of structural welding used in offshore construction.
- Gain an understanding of the project scope of work, specifications, schedule and all inter-discipline
requirements.
- Prepare sketches of detail design to guide Designers .
- Review MTOs for requisitions.
- Check drawings.
- Keep the Lead Engineer apprised of all activities, progress and concerns.
- Develop an awareness of costs related to own work.
- Develop basic understanding of MDR's business and customers it serves.
- Develop basic knowledge of MDR's business units and interactions including engineering,
fabrication, and marine functions.
- Develop advanced skills in use of standard productivity tools such as Microsoft Word, Excel, and
PowerPoint.
- Review vendor data for structural interface with guidance from more senior engineers.
- Able to use standard structural analysis software such as MicroSAS or SACS to perform static
analyses of fixed offshore platforms including soil I pile interaction with guidance from more senior
engineers.
- Able to use Worksheets or manual calculations to perform detailed design of fixed offshore platform
components with guidance from more senior engineers
Civil Engineer - (1900570)
LIAISE WITH: All design I drafting disciplines, all Engineering disciplines, Fabrication group and Document
Control.
BASIC FUNCTIONS
Perform FEED, Studies, and detailed design engineering, analysis and calculations on more complex and
demanding engineering tasks.
Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
Prioritize and organize own work to meet deadlines. Focus on completing work within budgets.
- Clearly communicate and explain information in straightforward engineering activities.
Recognize changes to scope and notify the Discipline Lead Engineer. Interface with all disciplines to develop
clash free designs.
Interface with other departments to obtain input for Discipline designs and drawings.
Assist procurement personnel in procuring discipline equipment, materials and services. Procurement
assistance includes preparing requisitions, evaluating technical quotations and preparing queries, compiling
bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement
to expedite vendor documents, as directed by Discipline Lead Engineer .
Assist in updating weight report based on receipt of vendor information. Check drawings.
Check engineering performed by others within Discipline.
Review vendor and subcontractor submittals, checking for compliance with project specifications
and providing comments as necessary.
Perform design verification through single-discipline check and assist with inter-discipline checks (IDC).
Keep the Lead Engineer apprised of all activities, progress and concerns.
Check final subcontractor and vendor data manuals to ensure that all requested data has been received and
approved.
Capture lessons learned and enter into MDR's Lessons Learned system. Capture Knowledge Objects and
enter into MDR's K.now system. Develop an awareness of costs related to own work and of the discipline.
Review vendor data for structural interface.
Able to use standard structural analysis software such as MicroSAS or SACS to perform static analyses of
fixed offshore platforms including soil I pile interaction.
- Able to use Worksheets or manual calculations to perform detailed design of fixed offshore platform
components
Sr Civil Engineer - (1900569)
Senior Structural Engineer
6+ yrs in oil and gas with major contractor or consultant Bachelor Degree in Civil or Structural Engineering (Master
Degree isPreferred)
predominantly performing detail design of offshore facilities
REPORTS TO : GENERAL PROFILE
All Engineering disciplines, Fabrication Group, Safety Dept, Offshore Group, Document Control,
LIAISE WITH:
Procurement Group, Subcontractors and Vendors, and Customers.
BASIC FUNCTIONS
Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design
codes and standards.
Apply knowledge and skills to a wide range of standard and nonstandard situations.
Prepare clear and accurate detailed design calculations and analyses including design reports and procedures .
Manage own time to meet agreed deadlines and budgets, and develop plans for short-term work activities in own area.
Clearly communicate and explain complex issues and work to establish understanding.
- Perform detailed engineering and design calculations including analysis of offshore structures (in- service I pre-service
conditions).
Be fully familiar with the project scope of work, specifications, schedule and all inter-disciplin e requirements; including
identifying concerns as early as practicable and taking appropriate initiatives to address the issues.
Identify changes to scope and promptly raise change notifications, including providing any necessary supporting
documentation and estimates. Provide similar support for Variation Orders.
Interface with other departments to obtain input for Discipline designs and drawings .
Maintain close co-ordination with other engineering disciplines, Planning, Fabrication, Marine, and
Document substantive communications (communications that result in significant decisions or assignment of actions) and
forward copies to Discipline Lead Engineer and Discipline Manager.
Assist in preparation of estimates for bid proposals, including technical query reviews, execution statements and manhour
estimates .
Raise technical queries to obtain missing information, clarify work scope , and to maintain preferred McDermott
procedures , specifications, standards, practices and operational requirements .
Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.
Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity.
Attend project review meetings, vendor meetings, engineering meetings and offshore site surveys, as required.
Provide technical direction and review of Designers producing products related to Structural Engineering.
Assist in providing necessary design inputs to other disciplines to enable them in proceeding with their deliverables.
Assist procurement personnel in procuring Discipline equipment, materials and services; ensuring that work produced
complies with Customer objectives and procedures . Procurement assista nce
includes preparing and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and
recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed
by Discipline Lead Engineer.
Review vendor and subcontractor submittals, checking for com pliance with project specifications
requirements.
Keep the Lead Engineer apprisedof all activities and concerns, technical, budgetary and manpower related.
Assist inproviding inputs for actual, planningand forecasting progressreports including associated productivity .
Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved.
Participatein internal, Customerand third party technical audits on engineering deliverables and vendor documents.
Assist Lead Engineerwith responses to Customer and other agencies(such as certifying authorities, auditors, thirdparties, etc.) on
their reviewand approval.
Capture lessons learnedand enter into MDR's Lessons Learned system. Capture KnowledgeObjects and enter into MDR's K.now
system.
Guide Jess experienced engineerson MDR and Discipline procedures, standards, worksheets, design calculations,
software,requisitions, technical bid evaluations, technical queries, etc.
Provide guidance on preparing structural general arrangements , basic schemes for fabrication and installation.
Prepare I review design analyses, calculations and procedures for discipline deliverables such as:
Analyze structures for pre-service conditions such as lift analyses, loadoutanalyses, and transportation and
tiedownanalyses.
Perform detailed steelwork design.
Review all detaileddrawings ensuring technicalcorrectness, professional presentation and that fabrication and installation
requirements are satisfied .
10+ yrs in oil and gas with major contractor or consultant Bachelor Degree in Civil or Structural Engineering (Master
Degree is Preferred)
predominantly performing detail design of offshore facilities
REPORTS TO: GENERAL PROFILE
Project: Lead Engineer , Project Engineering Manager or
Project Manager - Detailed knowledge of design techniques and analysis
methods, and detailed knowledge of the theory, content and
application of standards, codes and
Functional: Supervising Engineer or Engineering Manager guidelines as applicable for offshore.
- Knowledgeable in project coordination and
execution skills.
- Has continued to develop working knowledge and
application of offshore
structural codes and standards.
SUPERVISES: OTHER
Senior Structural Engineers and Structural Engineers Preferably Registered Professional Engineer or
member of professional engineering society
LIAISE WITH:
All Engineering disciplines, Fabrication Group, Safety Dept, Offshore Group, Project Management
Team, Document Control, Project Planner, Project Cost Controller, QC and Certification
Group, Procurement Group, Subcontractors and Vendors, and Customers.
BASIC FUNCTIONS
- Perform conceptual, FEED, and detailed analyses and design as per design basis, project
specifications, design codes and standards .
Apply in-depth skills and broad knowledge of the business to address complex problems and
nonstandard situations.
Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
Manage own time to meet objectives, and (as Lead Engineer) forecast and plan resource
requirements.
Clearly communicate and explain difficult concepts and persuade others to adopt a point of view.
Perform detailed engineering and design calculations including analysis of offshore structures_{in-
o Lead the Discipline engineering design of the assigned work area and complete
within planned schedule and budget, in accordance with standards, MDR and
project-specific procedures and to a high professional standard.
o Plan, organize and direct all aspects of Discipline execution on the assigned
project including scope, deliverables, schedule and all manpower resources - agree
allocations with the Discipline Manager.
action .
o Act as project representative for the Discipline during meetings with Project
Team, Customer discipline lead and relevant agencies such as certifying
authorities, auditors, third parties, etc.
Become fully familiar with the project scope of work, specifications, schedule and all inter-
discipline requirements; including identifying concerns as early as practicable and taking
appropriate initiatives to address the issues. Interpret contractual requirements as they relate to
engineering execution.
Identify changes to scope and promptly raise change notifications, including providing any
necessary supporting documentation and estimates. Provide similar support for Variation Orders.
Interface with other departments to obtain input for Discipline designs and drawings .
Maintain close co-ordination with other engineering disciplines, Planning, Fabrication, Marine, and
Project Management Team, as required.
Document substantive communications (communications that result in significant decisions or
assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager.
Prepare estimates for bid proposals, including technical query reviews, execution statements
and manhour estimates , identifying software requirements and any other project-
specific requirements.
Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred
McDermott procedures , specifications , standards, practices and operational requirements .
Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis,
philosophies ,
and technical specifications.
Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications
Review project schedule and fabrication schedule in relation to construction sequence, milestones, and engineering
scope.
Attend project kickoff and review meetings, vendor meetings, engineering meetings and offshore site surveys, as
required .
Provide technical direction and review of Designers producing products related to Structural Engineering.
Prepare, review, and (as Lead Engineer) approve design reports and procedures.
Assist in providing necessary design inputs to other disciplines to enable them in proceeding with their deliverables .
Assist procurement personnel in procuring Discipline equipment, materials and services; ensuring that work produced
complies with Customer objectives and procedures. Procurement assistance includes preparing, reviewing, and (as Lead
Engineer) approving requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and
recommendations , preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as
directed by Discipline Lead Engineer.
Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project
specifications and providing comments as necessary.
Review and (as Lead Engineer) approve design verification through single-discipline check I inter discipline check (IDC).
Provide technical support to fabrication queries, including identifying defect I rectification requirements.
Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary
and manpower related.
Assist in providing inputs for actual, planning and forecasting progress reports including associated productivity.
Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved.
Present issues and problems to Customers in a timely manner and assist Lead Engineer in negotiating resolution in
accordance with project and company requirements.
Perform (as required) Technical Quality Audit reviews in accordance with MDR Global Procedures.
Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities, auditors, third
parties, etc.) on their review and approval.
Capture lessons learned and enter into MDR's Lessons Learned system.
Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations,
software, requisitions, technical bid evaluations, technical queries, etc.
Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and
design deliverables.
Assist in the maintenance of departmental technical guidelines and standard calculation notes.
Develop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars,
present design solutions, and/or present topics at "lunch and learns"; etc.).
Identify and provide training to staff in specific techniques and proprietary software.
Provide information on employee performance to the Discipline Manager.
Provide guidance on preparing structural general arrangements, basic schemes for fabrication and installation.
Prepare I review design analyses, calculations and procedures for discipline deliverables such as:
o Analyze structures for in-service conditions such as static, fatigue, earthquake, etc.
Analyze structures for pre-service conditions such as lift analyses, loadout analyses, and transportation and tiedown
analyses.
- Review and (as Lead Engineer) approve all detailed drawings ensuring technical correctness,
professional presentation and that fabrication and installation requirements are satisfied.
Review and (as Lead Engineer) approve the project Weight Control Report, ensuring technical quality, professional
presentation and that Fabrication and installation requirements are employed.
Able to use standard structural analysis software such as MicroSAS or SACS to perform higher level analysis of offshore
platforms, providing guidance for less-experienced engineers performing these analyses.
Customer counterparts.
required.
Identify projectstaff needs based on knowledge of individual engineer's skill sets and
provide requests to the Discipline manager.
Plan, organize and assign tasks, responsibilities, and manhour budgets to the
discipline team, and verify tasks are completedwithin budgets .
Plan Discipline Level 4 detail deliverable schedule/ register compliant with the
overall execution plan.
time schedule.
Alert project team of any deviationfrom the scope or a need for change order.
Monitor KPI measurement results, and take corrective action as necessaryto
improve Discipline performance, including performance at interfaces with others.
Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt
of necessary design inputs.
Lead the Discipline team during projectaudits (internal, Customerand third party technical
audits) and Design Reviews.
o Review comments from Customers & other agencies on documents and drawings
produced bythe team, and resolve and give guidanceon their updateand incorporation.
Assist Discipline manager and Project Engineering Manageror Project Managerin Performance
Evaluation of project team members
Senior Project Engineer (Eng) - (1900567)
Senior Project Engineer (Eng)
TYPICAL EXPERIENCE EDUCATION
Assist the Project Engineering Manager in managing Lead Preferably Registered Professional Engineer or member of
Engineers and Lead Designers professional engineering society
Project Team members plus all functional departments based on the specific functions allotted for a
project, subcontractors and vendors, and Customer; includes Procurement, Fabrication, Marine,
LIAISE WITH: Quality, HSES, Completions, and Welding Technology.
BASIC FUNCTIONS
Coordinate and review inputs from the various Engineering disciplines, functional departments, and out-house contractors
contributing to the execution of the Engineering portion of a project.
Coordinate and ensure the generation of deliverables, reports, and procedures required for the Engineering portion of the
project.
Support management of the Engineering portion of the project as directed by the Project Engineering Manager.
Use discipline expertise and project experience to solve complex problems; take a broad perspective to identify innovative
solutions .
- Manage own time to meet objectives; forecast and plan resource requirements.
Assist Project Engineering Manager in planning, organizing, coordinating and controlling small projects or the Engineering portion of
a larger projectin accordance with established policies, procedures, systems and requirements.
Act as a liaison between Customer and Project Engineering Manager and Engineering Team,
including third party agencies and subcontractors.
Assist in preparation and implementation of the Engineering Project Execution Plan (PEP).
Assist in the preparation of the worksharing Interface Plan & Scope Split Matrix . Ensure all scopes of work are addressed, handover
points are understood and agreed, and that there are no scope gaps or overlaps between the worksharing offices and any
subcontractors.
Review the Project Plan along with the project planner and prepare subcontract scope packages for
any work that is required to be subcontracted.
Coordinate and become familiar with all inputs and changes to the Engineering Project Plan, scope of work, drawings and
specifications . Facilitate logging and evaluating impacts of all changes in the Desk Top Change Management System (DTCMS) .
Review any scope of work documents produced by the respective functional departments and identify changes impacting
Engineering, update the Engineering Scope of Work documents as required/agreed, and assist in preparation of change orders.
Coordinate information between Engineering and other functions (such as Fabrication, Marine, etc.)
to ensure timely receipt and delivery of necessary design inputs.
Ensure that registers of all documents received by Engineering as well as sent are maintained and updated in accordance with
Document Control inclusive of timely distribution to all concerned personnel, departments, other entities, and subcontractor(s) as
necessary.
Document substantive communications (communications that result in significant decisions or assignment of actions), and forward
copies to Engineering Project Manager.
Facilitate the development and monitor closeout of technical queries to obtain missing information, clarify work scope, and to
maintain preferred McDermott procedures, specifications, standards, practices and operational requirement.
Review project schedule and fabrication schedule in relation to construction sequence, milestones, and engineering scope, checking
for alignment.
Attend Weekly Progress Meetings (internal as well as with Customer) and prepare the Minutes of
Meetings.
Coordinate and ensure that Engineering and associated Design work, including weight control information and necessary
updates, are carried out by the respective discipline personnel in accordance with the specifications and schedule.
Ensure all procedures and calculations are submitted to the Customer for review and approval in accordance with the
contract. Monitor their approvals with the Customer.
Coordinate with the Project Quality Manager to ensure that the Engineering work is being performed per the Quality plans
and that all necessary inspection and certification are available for the final documentation package.
Coordinate with the Project Procurement Manager/Coordinator to ensure that specifications, TBEs, vendor data
expediting, and vendor data approvals required to be provided by Engineering are delivered per schedule, resolving
technical queries as required.
Coordinate with senior production engineers and offshore operations engineers frequently to understand the progress of
work activities on the project, identifying constraints related to Engineering deliverables and facilitating solutions.
Keep the Project Engineering Manager apprised of all activities and concerns, technical, budgetary and manpower
related.
Monitor work in progress and compile weekly/monthly reports on the status of each activity.
Gather and assemble inputs for actual, planning and forecasting progress reports including associated productivity.
Monitor KPI measurement results, and alert Discipline Leads as necessary to take timely corrective action to avoid
negative consequences to the project.
Participate in HAZAN, HAZID, HAZOP and other safety I operability I reliability studies and workshops , as necessary.
Travel as necessary to attend Customer and project meetings and to facilitate the resolution of Engineering interface
issues, including traveling to other Engineering offices, Fabrication Yard and Offshore.
Attend Technical Quality Audit reviews, as necessary .
Facilitate project Discipline Lead Engineers' and Designers' reviews of previous projects' lessons
learned, and ensure that lessons learned on the project are entered into MDR's Lessons Learned
system progressively as they are identified.
3+ yrs in oil and gas with major contractor or consultant predominantly performing detail design of offshore
facilities
Bachelor Degree in Fire Protection, Chemical or Mechanical Engineering, or in similar Engineering field
GENERAL PROFILE
REPORTS TO:
Trainee Engineers
Preferably Registered Engineer in Training (EIT) or member of professional engineering society
LIAISE WITH:
All design I drafting disciplines, all Engineering disciplines, Fabrication group and Document Control.
- Perform FEED, Studies, and detailed design engineering, analysis and calculations on more complex
and demanding engineering tasks.
- Prepare clear and accurate detailed design calculations and analyses including design reports and
procedures.
- Gain familiarity with the project scope of work, specifications, schedule and all inter-discipline
requirements; including identifying concerns as early as practicable.
- Check drawings.
- Perform design verification through single-discipline check and assist with inter-discipline checks
(IDC).
- Keep the Lead Engineer apprised of all activities, progress and concerns.
- Check final subcontractor and vendor data manuals to ensure that all requested data has been
received and approved.
- Capture lessons learned and enter into MDR's Lessons Learned system.
- Prepare life saving and personnel safety equipment specifications and data sheets.
- Perform firewater demand calculations and hydraulic calculations using PIPENET or equivalent
software.
- Prepare P&ID markups for Firewater ring main system and Deluge system including providing details
of interconnection with hose reels, monitors, hydrants and deluge valves I nozzles.
Project: Lead Engineer Strong working knowledge of many design techniques and
analysis methods , and detailed knowledge of the content and
Functional: Supervising Engineer or Engineering Manager application ofstandards, codes and guidelines as applicable
for offshore.
SUPERVISES: OTHER
Fire Protection & Safety Engineers Preferably Registered Professional Engineer or member of
professional engineering society
LIAISE WITH:
All Engineering disciplines, Fabrication Group, Safety Dept, Offshore Group, Document Control,
Procurement Group, Subcontractors and Vendors, and Customers.
BASIC FUNCTIONS
Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design
codes and standards.
Apply knowledge and skills to a wide range of standard and nonstandard situations.
Prepare clear and accurate detailed design calculations and analyses including design reports and procedures.
Manage own time to meet agreed deadlines and budgets, and develop plans for short-term work activities in own area.
Clearly communicate and explain complex issues and work to establish understanding.
Be fully familiar with the project scope of work, specifications, schedule and all inter-discipline requirements; including
identifying concerns as early as practicable and taking appropriate initiatives to address the issues.
Identify changes to scope and promptly raise change notifications, including providing any
necessary supporting documentation and estimates. Providesimilar support for Variation Orders.
Interface with alldisciplines to develop clash free designs.
Interface with other departments to obtain input for Discipline designs and drawings.
Maintain close co-ordination with other engineering disciplines, Planning, Fabrication, Marine, and Project Management
Team, as required.
Document substantive communications (communicationsthat result in significant decisions or assignment of actions) and
forwardcopies to Discipline Lead Engineer and Discipline Manager.
Assist in preparation of estimates for bid proposals, including technical query reviews, execution statements and manhour
estimates .
Raise technical queries to obtainmissing information, clarifywork scope, and to maintainpreferred McDermott procedures,
specifications, standards, practices and operational requirements.
Prepare Discipline engineering design basis, philosophies, and technical specifications, as required.
Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications
and functional
integrity.
Attend projectreview meetings, vendormeetings, engineering meetingsand offshore site surveys, as required.
Provide technicaldirection and review of Designersproducing products related to Fire Protection &
Safety Engineering
Assist procurement personnel in procuring Discipline equipment, materialsand services; ensuringthat workproduced
complies with Customer objectives and procedures. Procurement assistance includes preparing and reviewingrequisitions,
evaluating technical quotations and preparing queries,compilingbidtabulations and recommendations, preparingpurchase
requisitions, and coordinating with Procurement to expedite vendordocuments, as directedby Discipline Lead Engineer.
Assist in updating weight report based on receiptof vendor information.
Check engineering performed by otherswithin DisciplinE
Review vendor and subcontractor submittals, checkingfor compliance with project specifications and providing
commentsas necessary.
Keep the Lead Engineer apprised of all activities and concerns, technical, budgetary and
manpower
SUPERVISES: OTHER
Engineering Project Team assembled for the project; includes Lead Engineers, Lead Designers,
and Project Engineers
Revision 0
Date 31-Jan-2013
JOB DESCRIPTION
Core Code: PS Career Ladder: Prof
Approved By Sudhakar Kumar
Eng Proj Mgt
TITLE GRADE
Project Team members and functional departments, subcontractors and vendors , and Customer;
Managers within MDR's Engineering offices as necessary on matters of resource needs, personnel
LIAISE WITH: administration , quality assurance, training, etc.
BASIC FUNCTIONS
Responsible and accountable for management and financial and technical success of all phases of the Engineering
portion of a small to medium size project,or part of a large project.
Responsible for ensuring the Engineering portion of the project is administered and executed to the satisfaction of the
Customer, meets the contract's scope, schedule and quality requirements, meets KPI requirements, and the work is
performed within budget, in accordance with the highest ethical and Safety Standards and compliant with MDR policies
and procedures . Collaborate with Engineering Discipline Leads and Engineering Managers to achieve lowest cost
technical solutions.
Use discipline and project management expertise to identify and solve a range of project problems/issues between
functional groups.
Plan, direct and lead the Engineering efforts and formulate the most cost-effective plan to timely completion within budget,
and manage the execution of that plan in accordance with MDR Global I Area guidelines and Project Management Level
2 & 3 procedures and the Operating Model Policy.
Act as Engineering's point of contact in communications and meetings with Customer project team, third party agencies
and subcontractors; for the Engineering portion of the project.
Responsible for organizing the Engineering Project Team and liaising with Project Controls, Procurement, Estimating, and
Engineering Managers to fortify all required positions with appropriate and competent persons to undertake the
Engineering portion of the project.
When portions of the work involve worksharing, responsible for ensuring Engineering teams in the other locations are
similarly fortified.
Communicate the as-awarded scope of work to the Engineering project team's lead personnel. The scope of
work includes Scope of Services and Scope of Facilities.
Communicate key contractual requirements to the Engineering project team's lead personnel. These include clauses
related to change orders, approval authorities, warranties, pricing and payment basis.
Responsible for the development, approval and implementation of the Engineering Project
(
(
Revision 0
Date 31-Jan-2013
JOB DESCRIPTION
Core Code: PS 1 Career Ladder: Prof -
TITLE GRADE
Execution Plan (PEP), and Engineering's portion of Project Set-Up and Project Close-out.
Determine in consultation with Functional Engineering Manager and Project Team whether any part of the Engineering work scope
needs to be subcontrac ted or workshared due to limitations of in house capabilities or capacity constraints, and modify Project Plan
accordingly. Ensure changes in execution plans are communicated to the project team 's lead personnel, and incorporated
into project forecasts. Direct the management of these subcontracts .
Review and approve worksharing Interface Plan & Scope Split Matrix. Ensure all scopes of work are addressed, handover points are
understood and agreed, and that there are no scope gaps or overlaps between the worksharing offices and any subcontractors .
Implement requirements from Constructabil ity Reviews, and ensure these are addressed in the project execution plan and
schedule .
Develop and proactively implement mitigation plans as necessary to address potential project risks
Persuade, communicate , and reinforce Engineering project goals with internal and external customers. Negotiate changes to project
work scope, contract price and schedule with Customers and subcontractors.
Identify, track and manage all changes in the Engineering Scope of Work, schedule and execution methodology on the project, and
ensure that all changes are promptly captured through the Desk Top Change Management System (DTCMS).
Communicate changes to the scope and contract to the project team as the project progresses. Liaise and ensure effective
coordination with overall Project Director/Manager , Project Construction
Managers, Project Procurement Manager, Project HSE Advisor, Project Quality Manager, Project
Controls Manager, Discipline Managers, Subcontractors, Production Engineers, Operations Engineers and Completions Managers.
Ensure effective management of the interfaces between Engineering and the respective groups from
Ensure clear and open communication with in Engineering team and between Engineering team and
functional groups.
Document substantive communications (communications that result in significant decisions or assignment of actions), and ensure the
project team has also documented substantive communications .
Responsible for management of Engineering or the Engineering portion of Bid Proposals (n conjunction with Proposals group,
Functional groups, Estimating, Legal and Business Development departments. As part of Proposal Team , lead Engineering bid
technical and commercial clarificationmeetings and negotiations with the Customer to bring about successful award of the project.
Provide input into develo pment of technical solutions driving the lowest cost proj ect scope for
(
® SAFETY, PRODUCTIVITY, ETHICS, QUALITY .•. ...EQUAL VALUES REQUIREEQUAL COMMITMENT t!)
DEPARTMENT NAME
Revision 0
Date 31-Jan-2013
JOB DESCRIPTION
Core Code: P5 I Career Ladder: Prof -
Approved By Sudhakar Kumar
Eng Proj Mgt
TITLE GRADE
Prospective Work.
Prepare and approve Engineering Project Management budgets and execution plans for proposals and projects. Update
as required.
Identify project staff needs based on knowledge of individual skill sets and provide requests to the Engineering Manager.
Review and approve technical queries to obtain missing information, clarify work scope, and to maintain preferred
McDermott procedures, specifications, standards, practices and operational requirements.
Participate in development of Integrated Project Plans and all subsequent updates as part of the
workshop process. Ensure the Engineering activities on the project plan are met and progressed accurately .
Attend Weekly Progress Meetings (internal as well as with Customer), and conduct periodic review meetings with Lead
engineering personnel as necessary to identify and address engineering-related project issues.
0 Expenditures,
0 Budgets,
0 Estimates,
0 Cost Reports,
0 Financial forecasts,
0 Schedules, and
0 Project-specific procedures.
Report to the overall Project Director/Manager on all activities and concerns, technical, budgetary and manpower related.
Facilitate timely problem resolution with Engineering team members, and between Engineering and other team members .
Take an active role in any problem or opportunity events where Engineering participation can contribute significant benefit
toward meeting project objectives.
Foster an environment of positive team morale and collaboration within the project team .
Manage Customer relationship by building lasting trust through commitment and open communication.
Monitor, Analyze and Forecast Engineering performance, and take timely corrective action to avoid
Revision 0
Date 31-Jan-2013
JOB DESCRIPTION
TITLE GRADE
Participate in HAZAN, HAZID, HAZOP and other safety I operability I reliability studies and workshops, as necessary.
member representation.
Travel as necessary to attend Customer and project meetings and to facilitate the resolution of Engineering interface
issues, including traveling to other Engineering offices, Fabrication Yard and Offshore.
Present issues and problems to Customers in a timely manner and assist overall Project Director/Manager in negotiating resolution
in accordance with project and company requirements .
Identify communication I expectation I project execution gaps between MDR and Customer. Develop and execute solutions to close
identified gaps.
Ensure that Technical Quality Audit reviews identified in the Engineering Project Execution Plan are performed in accordance with
MDR Global Procedures and corrective actions from these reviews are implemented.
Ensure that lessons learned on previous projects are considered by the Engineering Project Team and that lessons learned on the
project are entered into MDR's Lessons Learned system progressively as they are identified.
Manage daily activities of Engineering project personnel including technical and administrative support.
Incorporate approved Lessons Learned into MDR Level 2 & 3 engineering project management procedures, as applicable.
Assist Department Manager in identifying project engineering management needs including development of personnel and technical
capabilities.
Provide input to Engineering Manager on performance appraisals for project team members. Assist local Management in interviewing
job applicants
Production Engineer - (1902443)
• Serve as a discipline leader providing technical and administrative assistance to ensure compliance with project specifications, ma
within your assigned group.
Tareas y responsabilidades
• Adopt and promote health, safety, environmental safety and quality plans of the company;
• Maintain knowledge of contract specifications, work requirements and subcontracts, plan and schedule project activities;
• Assist in the development of engineering delivery dates (ROSS);
• Process requests for project materials and monitor delivery dates (ROSS date, size, field requisitions);
• Determine distribution lists of project information (drawings, specifications, workshop, sketches, etc.);
• Assess the inputs of assigned project activities;
• Assist in the development of man-hour forecasts and cost of materials for assigned project disciplines;
• Coordinate and distribute work packages for workshop fabrication and field assembly;
• Coordinate the activities of subcontractors;
• Evaluate drawing revisions and document changes, and prepare revision reports for impact documents;
• Assist with account management (labor and materials), including reallocation of supply versus project requirements);
• Maintain a system of presentation of projects according to the requirements of the company;
• Solve construction / conflict problems and mitigate waiting points in the field;
• Liaison between customer representative and field staff;
• Attend project meetings as needed;
• Monitors scope changes and helps with the development of change orders;
• Report weekly progress and monitor productivity.
Otras expectativas:
• Elementary knowledge of PMI / PMBOK / Problem Solving / Decision Making / Lead by Example / Good Performance under pr