Вы находитесь на странице: 1из 2

Please look at attached Picture-manual. Keep it simple stupid, then read below.

1. Main window with SHMA Swing shows heikin ashi charts with swing signals.
Look for confirmations, divergences from following indicators. Main window also
shows FibGeoPivots and some stats.

Main rule is - trend reversal in particular timeframe are more probable when
market hits pivot levels and we can see extreme values of Revelation indicator
and MultiIFT MOD. USE 3,9,27min and hourly charts for daytrading.

2. Revelation Indicator uses:


Modified TSI
The TSI is a variation of the Relative Strength Index. The TSI uses a doubly-smoothed exponential moving
average of price momentum to eliminate choppy price changes and spot trend changes.
This indicator is designed to have very little or no time lag.
An increasing True Strength value indicates increasing momentum in the direction of price movement.

The Modified Finite Volume Element Indicator (ModFVE)


FVE is a money flow indicator but with two important differences from existing money flow indicators:

* It resolves contradictions between intraday money flow indicators (such as Chaikin s money flow) and
interday money flow indicators (like On Balance Volume) by taking into account both intra- and interday
price action.
* Unlike other money flow indicators which add or subtract all volume even if the security closed just 1
cent higher than the previous close, FVE uses a volatility threshold to take into account minimal price
changes.

The FVE provides 3 types of signals:

1. The strongest signal is divergence between price and the indicator. Divergence can provide leading
signals of breakouts or warnings of impending corrections. The classic method for detecting divergence is
for FVE to make lower highs while price makes higher highs (negative divergence). An alternative method
is to draw the linear regression line on both charts, and compare the slopes. A logical buy signal would be
for FVE, diverging from price, to rise sharply and make a series higher highs and/or higher lows.
2. The most obvious and coincident signal is the slope of the FVE line. An upward slope indicates that
the bulls are in control and the opposite for downward.
3. This is a unique and very important property of this indicator. Values above zero are bullish and
indicate accumulation while values below zero indicate distribution. FVE crossing the zero line indicates
that the short to intermediate balance of power is changing from the bulls to the bears or vice versa. The
best scenario is when a stock is in the process of building a base, and FVE diverges from price and rises
to cross the zero line from below, at a sharp angle. Conversely the crossing of the zero line from above is
a bearish signal to liquidate positions or initiate a short trade.

Green dots are areas of bulls' strenght and viceversa for pink dots. See arrows for reversal signals

3. Multi Inverse Fisher Transform MOD and Revelation Indicator.


This looks at three different cyclic indicators together at one time. When three oscillators synchronize, this
signals a strong buy or sell.
Look at Modified VFE in Revelation indicator.If the VFE is above the zero line, look for synchronized
oscillators rising out of an oversold condition -- this is a good buy signal. If VFE is below zero, look for
overbought conditions and short, instead.
The REI is Tom DeMark's Range Expansion Index. This is the most leading indicator included here. The
DSS is a double-smoothed stochastic, good for timing and exact buy or sell point. And the IFT is the
Inverse Fisher Transform function.
This indicator works well for any time frame. All it takes is a little getting used to before you become
intuitive with it.
The Range Expansion Index identifies areas of price exhaustion generally associated with price peaks
and troughs. This indicator is selective in the sense that it compares current price activity with recent price
movement, but it ignores breakaway price moves until its steepness begins to dissipate.

4.TG Volume

A 30 period moving average can be used to determine if volume is greater than average or less than
average.
If you put a 2.0 standard deviation of that 30 average on the chart as well,
then you could call all volume histogram bars greater than that line high.
You could also place a 3.0 standard deviation of the average on the chart and call all
volume histogram bars greater than that Ultra High Volume. This is basically what TG does.

Please feel free to optimizee parameters and spot any new relations between indicators.

5.Money and Risk Management

Never trade against major trend. Use only 2% of your account for each transaction. When You see
conformity with Main SHMA Swing indications and Revelation Indicator, and in 1 and 3 min charts
with Multi IFT then You got >80% odds You are right. When Market is near major Pivot level – be
cautios.

It is advised that You should know basic market laws – trends, supports, resistance, pivots,
candles.

Вам также может понравиться