Академический Документы
Профессиональный Документы
Культура Документы
Data Sheet
DESCRIPTION
A deck paint based on modified alkyd urethane.
PRINCIPAL CHARACTERISTICS
- Short drying and recoat ability time, can be used for normal deck traffic 8 – 10
hours after application of last coat (at 20°C)
- Good resistance against oil and water
- Good abrasion resistance
- Good leveling properties
RECOMMENDED USE
As high quality deck paint for new buildings, and offers great advantages when
used for upgrading or maintenance of existing aged conventional deck system.
SURFACE PREPARATION
New steel; Blast cleaned to SIS- Sa 2½
Aluminum sprayed steel, dry and clean of any contamination.
Maintenance/ repair; all rust and aged coat cleaning by hand tool/power tool
Jl. Lanbouw 1, Jagorawi-Cibinong Bogor, INDONESIA; 021-8756310-11, 8753043; F: 021-8753042; www.sigmautama.com; cs@sigmautama.com
Product
Data Sheet
CONDITION OF APPLICATION
Temperature: minimum 10oC
Maximum 50o C
Relative humidity: maximum 85%
Substrate temperature should be at least 3o C above dew point.
SYSTEM SPECIFICATION
Preceding coat required : None or according to specification
Finish coat required : None or according to specification.
INSTRUCTION FOR USE
Stir well before use, preferable by means of mechanical mixer to ensure good
homogeneity.
APPLICATION DETAILS
Method of application Airless spray Air spray Brush
Thinner No. 42-00 42-00 42-00
Volume of thinner Max. 10% 5 - 15% Max. 10%
Nozzle orifice 0.018” (0.45 mm) 2 mm -
Nozzle pressure 150 Bar/2100psi 4Bar/57psi -
Cleaning solvent Sima Thinner 42-00
SAFETY PRECAUTION
- Avoid contact with the skin and eyes. Wear suitable protective clothing such as
overalls, goggles, dust mask and gloves.
- Ensure that there is adequate ventilation in the area where the product is being
applied. Do not breathe the vapour or spray.
- This product is flammable. Keep away from sources of ignition. Do not smoke.
HEALTH AND SAFETY: For detailed information on the health and safety hazards and precaution for use
of this product, please see the MATERIAL SAFETY DATA SHEET.
Jl. Lanbouw 1, Jagorawi-Cibinong Bogor, INDONESIA; 021-8756310-11, 8753043; F: 021-8753042; www.sigmautama.com; cs@sigmautama.com