SINGAPORE STANDARD
CP 55: 1991
(ICS 13.220.30)
CODE OF PRACTICE FOR
Use And Maintenance Of
Portable Fire Extinguishers
Copyright Reserved
Singapore Productivity and Standards Board JROGER
ROGER PRESTON (VIETNAt
Singapore 118221 5 Nguyen Gia Theme
District 3, HCMC, Vietnam, :
TEL: 84-8-9306597 FAX:
E-mail: admin - jpp@ jepvietns
ISBN 9971-67-401-7CP 85: 1991
‘This Singapore Standard having been approved by the Building and Construction Industry Practice
Committee was endorsed by the Standards Council on 3 January 1991.
First published, 1991.
First reprint, 1993.
Second reprint, 1997.
Third reprint, 1998,
‘The Buliding arid Construction industry Practice Committee appointed by the Standards Council consists
of the following members:
Name Organisation
Chairman; Mr Chow Kok Fong Construction Industry Development Board
Deputy
Chairman: Mr Lam Siow Wah Construction Industry Development Board
Secretary; Mr Stephen Chua ‘Singapore Institute of Standards and Industial Research
Members: Mr Chee Keng Yarn Association of Consulting Engineers, Singapore
Mr Chia Kok Leong Singapore Institute of Architects
Mr Lal Chong Meng Singapore Contractors Association Limited
Me Gary Ong Khim Chye National University of Singapore
‘Assoc Prof Phang Kok Wai Nanyang Technological Institute
Mr Phang Pock Tong, Tony —_-Housirig and Development Board
Mr Song Wee Ngee Institution of Enginaers, Singapore
Mr Benedict Tan Public Works Department
Mr Harry K C Wong Department of Industrial Safety
Tho Technical Committee appointed by the Building and Construction industry Practice Committee and
responsible for the preparation of this standard consists of representatives from the folowing
organisations:
Name Organisation
Chairman: Mr Boo Geok Kwang Singapore Joint Civil Defence Forces
Secretary : Miss Tan Meow Leng ‘Singapore Institute of Standards and Industrial Research
Members: Mr Choy Mam Koon Singapore Joint Civil Defence Forces
Mr Ho Siong Hin Department of industrial Safety
Mr Loke Chong Ngean ‘Singapore Manufacturers’ Association
Mr Mohammed Bin Awi ‘Singapore Insttute of Standards and Industial Research
‘Mr Charles Rudd Institution of Engineers, Singapore
Mr Augustus Tan Singapore Contractors’ Association Limited
2
(
i
“eeForeword
Section One, General
14 Scope -
1.2 Purpose :
1.3 Definitions =~ :
1.4. Classification and ratings of fire extinguishers,
1.5 Classification of hazards-
1.6 General requirements -
Section Two. Sele
21 General requirements -
22 Selection by hazard -
n of extinguishers
CONTENTS
Section Three. Distribution of extinguishers
3.1. General requirements -
3.2 Fire extinguisher size and placoment for Class A hazards
3.3 Fite extinguisher size and placement for Class B fires
(excluding fires in flammable liquids of appreciable depth)
3.4 Fire extinguisher size arid placement for Class B fires in
flammable liquids of appreciable depth -
3. Class 8 fire extinguishers for pressurized flammable liquids
and gas fires - :
3.6 Cooking grease fires -
3.7 Three-dimensional Class 8 fires =
3.8 Fire extinguisher size and placement for Class C hazards
3.9 Fire extinguisher size and placement for Class D hazards
Section Four. Inspection, maintenance and recharging
44 General : .
42 Inepoction -
CP 55: 1991
Page
10
1"
2
13
13
13
4
4
14