Академический Документы
Профессиональный Документы
Культура Документы
SESSION: 2018-2019
Department of Mechanical Engineering
Project Report on
“HYDRAULIC JACK”
Submitted In Partial Fulfillment of the requirement for
degree of Bachelor of Technology
In Mechanical Engineering
(H.O.D)
SANJAY INSTITUTE OF
ENGINEERING & MANAGEMENT ,
MATHURA
SESSION: 2018-2019
Department of Mechanical Engineering
Project Report on
“HYDRAULIC JACK”
Dr.A.P.J Abdul Kalam Technical University, Lucknow (U.P.)
Submitted In Partial Fulfillment of the requirement for
degree of Bachelor of Technology
In Mechanical Engineering
(H.O.D)
Certificate
RAJKUMARof the Department of Mechanical Engineering, Sanjay Institute, of
Engineering & Management, Mathura towards the partial fulfillment of the
Mechanical Engineering” is a record of the bonafide work he has carried under my
supervision.
Supervisor: Tejpal singh
Acknowledgements
We would like to express my gratitude to all those who gave us the possibility to
complete this project. We want to thank the Department of Mechanical Engineering of
“Sanjay Institute of Engineering & Management” for giving us such a golden
opportunity to commence this project in the first instance We have furthermore to
thank the Assistant Professor“Tejpal singh ” who encouraged us to go ahead with
our project. We are also thankful to the entire Mechanical Engineering Department
“Sanjay Institute of Engineering & Management” for their support.
In the end We would like to show Our gratitude towards the laboratory staffs for their
efforts and support in completing my project.
RAJKUMAR (1525240007)
Declaration
We hereby declare that this submission is my own work and that, to the best of my
another person nor material which to a substantial extent has been accepted for the
award of any other degree or diploma of the university or other institute of higher
learning, except where due acknowledgement has been made in the text.
Signature
RAJKUMAR (1525240007)
Date:
Dr.A.P.J Abdul Kalam Technical
University, Lucknow (U.P.)
SESSION: 2018-2019
Department of Mechanical Engineering
Project Report on
“HYDRAULIC JACK”
Submitted In Partial Fulfillment of the requirement for
degree of Bachelor of Technology
In Mechanical Engineering
SESSION: 2018-2019
Department of Mechanical Engineering
Project Report on
“HYDRAULIC JACK”
Dr.A.P.J Abdul Kalam Technical University, Lucknow (U.P.)
Submitted In Partial Fulfillment of the requirement for
degree of Bachelor of Technology
In Mechanical Engineering
(H.O.D)
Certificate
VIKAS PANDEY of the Department of Mechanical Engineering, Sanjay Institute,
of Engineering & Management, Mathura towards the partial fulfillment of the
supervision.
Supervisor: Tejpal singh
Acknowledgements
We would like to express my gratitude to all those who gave us the possibility to
complete this project. We want to thank the Department of Mechanical Engineering of
“Sanjay Institute of Engineering & Management” for giving us such a golden
opportunity to commence this project in the first instance We have furthermore to
thank the Assistant Professor“Tejpal singh ” who encouraged us to go
ahead with our project. We are also thankful to the entire Mechanical Engineering
Department “Sanjay Institute of Engineering & Management” for their support.
In the end We would like to show Our gratitude towards the laboratory staffs for their
efforts and support in completing my project.
We hereby declare that this submission is my own work and that, to the best of my
another person nor material which to a substantial extent has been accepted for the
award of any other degree or diploma of the university or other institute of higher
learning, except where due acknowledgement has been made in the text.
Signature
Date:
Dr.A.P.J Abdul Kalam Technical
University, Lucknow (U.P.)
SESSION: 2018-2019
Department of Mechanical Engineering
Project Report on
“HYDRAULIC BRIDGE”
Submitted In Partial Fulfillment of the requirement for
degree of Bachelor of Technology
In Mechanical Engineering
SESSION: 2018-2019
Department of Mechanical Engineering
Project Report on
“HYDRAULIC BRIDGE”
Dr.A.P.J Abdul Kalam Technical University, Lucknow (U.P.)
Submitted In Partial Fulfillment of the requirement for
degree of Bachelor of Technology
In Mechanical Engineering
This is to certify that the thesis entitled HYDRAULIC BRIDGE being submitted by
Mechanical Engineering” is a record of the bonafide work he has carried under my
supervision.
Supervisor: Tejpal singh
Acknowledgements
We would like to express my gratitude to all those who gave us the possibility to
complete this project. We want to thank the Department of Mechanical Engineering of
“Sanjay Institute of Engineering & Management” for giving us such a golden
opportunity to commence this project in the first instance We have furthermore to
thank the Assistant Professor“Tejpal singh ” who encouraged us to go
ahead with our project. We are also thankful to the entire Mechanical Engineering
Department “Sanjay Institute of Engineering & Management” for their support.
In the end We would like to show Our gratitude towards the laboratory staffs for their
efforts and support in completing my project.
Nikhil Tiwari(1525240011)
Declaration
We hereby declare that this submission is my own work and that, to the best of my
another person nor material which to a substantial extent has been accepted for the
award of any other degree or diploma of the university or other institute of higher
learning, except where due acknowledgement has been made in the text.
Signature
Nikhil Tiwari(1525240011)
Date:
Dr.A.P.J Abdul Kalam Technical
University, Lucknow (U.P.)
SESSION: 2018-2019
Department of Mechanical Engineering
Project Report on
“HYDRAULIC BRIDGE”
Submitted In Partial Fulfillment of the requirement for
degree of Bachelor of Technology
In Mechanical Engineering
SESSION: 2018-2019
Department of Mechanical Engineering
Project Report on
“HYDRAULIC BRIDGE”
Dr.A.P.J Abdul Kalam Technical University, Lucknow (U.P.)
Submitted In Partial Fulfillment of the requirement for
degree of Bachelor of Technology
In Mechanical Engineering
This is to certify that the thesis entitled HYDRAULIC BRIDGE being submitted by
the requirement for the award of the degree of the “Bachelor of Technology in
Mechanical Engineering” is a record of the bonafide work he has carried under my
supervision.
Supervisor: Tejpal singh
Acknowledgements
We would like to express my gratitude to all those who gave us the possibility to
complete this project. We want to thank the Department of Mechanical Engineering of
“Sanjay Institute of Engineering & Management” for giving us such a golden
opportunity to commence this project in the first instance We have furthermore to
thank the Assistant Professor“Tejpal singh ” who encouraged us to go
ahead with our project. We are also thankful to the entire Mechanical Engineering
Department “Sanjay Institute of Engineering & Management” for their support.
In the end We would like to show Our gratitude towards the laboratory staffs for their
efforts and support in completing my project.
We hereby declare that this submission is my own work and that, to the best of my
another person nor material which to a substantial extent has been accepted for the
award of any other degree or diploma of the university or other institute of higher
learning, except where due acknowledgement has been made in the text.
Signature
Date:
Dr.A.P.J Abdul Kalam Technical
University, Lucknow (U.P.)
SESSION: 2018-2019
Department of Mechanical Engineering
Project Report on
“HYDRAULIC BRIDGE”
Submitted In Partial Fulfillment of the requirement for
degree of Bachelor of Technology
In Mechanical Engineering
SESSION: 2018-2019
Department of Mechanical Engineering
Project Report on
“HYDRAULIC BRIDGE”
Dr.A.P.J Abdul Kalam Technical University, Lucknow (U.P.)
Submitted In Partial Fulfillment of the requirement for
degree of Bachelor of Technology
In Mechanical Engineering
This is to certify that the thesis entitled HYDRAULIC BRIDGE being submitted by
Abhay kumar of the Department of Mechanical Engineering, Sanjay Institute,
of Engineering & Management, Mathura towards the partial fulfillment of the
Mechanical Engineering” is a record of the bonafide work he has carried under my
supervision.
Supervisor: Tejpal singh
Acknowledgements
We would like to express my gratitude to all those who gave us the possibility to
complete this project. We want to thank the Department of Mechanical Engineering of
“Sanjay Institute of Engineering & Management” for giving us such a golden
opportunity to commence this project in the first instance We have furthermore to
thank the Assistant Professor“Tejpal singh ” who encouraged us to go
ahead with our project. We are also thankful to the entire Mechanical Engineering
Department “Sanjay Institute of Engineering & Management” for their support.
In the end We would like to show Our gratitude towards the laboratory staffs for their
efforts and support in completing my project.
We hereby declare that this submission is my own work and that, to the best of my
another person nor material which to a substantial extent has been accepted for the
award of any other degree or diploma of the university or other institute of higher
learning, except where due acknowledgement has been made in the text.
Signature
Date:
Dr.A.P.J Abdul Kalam Technical
University, Lucknow (U.P.)
SESSION: 2018-2019
Department of Mechanical Engineering
Project Report on
“HYDRAULIC BRIDGE”
Submitted In Partial Fulfillment of the requirement for
degree of Bachelor of Technology
In Mechanical Engineering
SANJAY INSTITUTE OF
ENGINEERING & MANAGEMENT ,
MATHURA
SESSION: 2018-2019
Department of Mechanical Engineering
Project Report on
“HYDRAULIC BRIDGE”
Dr.A.P.J Abdul Kalam Technical University, Lucknow (U.P.)
Submitted In Partial Fulfillment of the requirement for
degree of Bachelor of Technology
In Mechanical Engineering
Certificate
This is to certify that the thesis entitled HYDRAULIC BRIDGE being submitted by
Abhishek Kumar of the Department of Mechanical Engineering, Sanjay
Institute, of Engineering & Management, Mathura towards the partial fulfillment of
the requirement for the award of the degree of the “Bachelor of Technology in
Mechanical Engineering” is a record of the bonafide work he has carried under my
supervision.
Supervisor: Tejpal singh
Acknowledgements
We would like to express my gratitude to all those who gave us the possibility to
complete this project. We want to thank the Department of Mechanical Engineering of
“Sanjay Institute of Engineering & Management” for giving us such a golden
opportunity to commence this project in the first instance We have furthermore to
thank the Assistant Professor“Tejpal singh ” who encouraged us to go
ahead with our project. We are also thankful to the entire Mechanical Engineering
Department “Sanjay Institute of Engineering & Management” for their support.
In the end We would like to show Our gratitude towards the laboratory staffs for their
efforts and support in completing my project.
We hereby declare that this submission is my own work and that, to the best of my
another person nor material which to a substantial extent has been accepted for the
award of any other degree or diploma of the university or other institute of higher
learning, except where due acknowledgement has been made in the text.
Signature
Date:
Dr.A.P.J Abdul Kalam Technical
University, Lucknow (U.P.)
SESSION: 2018-2019
Department of Mechanical Engineering
Project Report on
“HYDRAULIC BRIDGE”
Submitted In Partial Fulfillment of the requirement for
degree of Bachelor of Technology
In Mechanical Engineering
SESSION: 2018-2019
Department of Mechanical Engineering
Project Report on
“HYDRAULIC BRIDGE”
Dr.A.P.J Abdul Kalam Technical University, Lucknow (U.P.)
Submitted In Partial Fulfillment of the requirement for
degree of Bachelor of Technology
In Mechanical Engineering
This is to certify that the thesis entitled HYDRAULIC BRIDGE being submitted by
Engineering, Sanjay Institute, of Engineering & Management, Mathura towards the
partial fulfillment of the requirement for the award of the degree of the “Bachelor of
Technology in Mechanical Engineering” is a record of the bonafide work he has
carried under my supervision.
Supervisor: Tejpal singh
Acknowledgements
We would like to express my gratitude to all those who gave us the possibility to complete this
project. We want to thank the Department of Mechanical Engineering of “Sanjay Institute of
Engineering & Management” for giving us such a golden opportunity to commence this project
in the first instance We have furthermore to thank the Assistant Professor“Tejpal singh
” who encouraged us to go ahead with our project. We are also thankful to the entire Mechanical
Engineering Department “Sanjay Institute of Engineering & Management” for their support.
In the end We would like to show Our gratitude towards the laboratory staffs for their efforts and
support in completing my project.
Pawan Patel (1425240021)
Declaration
We hereby declare that this submission is my own work and that, to the best of my knowledge
and belief, it contains no material previously published or written by another person nor material
which to a substantial extent has been accepted for the award of any other degree or diploma of
the university or other institute of higher learning, except where due acknowledgement has been
Signature
Date: