Академический Документы
Профессиональный Документы
Культура Документы
Facts book
Welcome to Atlas Copco
Construction Tools
At the end of the day, you get the job done with good
results. And in the long run you get less maintenance,
higher efficiency and lower lifecycle costs.
2
Valuable support from a global partner
Atlas Copco Construction Tools’ global network consists of
more than 60 customer centers and over 1,000 distributors
around the globe. We have the knowledge and experience
to help you choose the best tools for the job – tools that will
keep on working – and we provide you with professional
advice, on-site training, assistance and service. It all adds
up to sustainable productivity.
Latest News:
Compaction equipment
• Rammers
• Forward and reversible plates
• Double drum rollers
Concrete equipment
• Trowels
• Screeds
• Pokers
• External vibrators
• Floor saw
3
Construction and Maintenance
4
5
Demolition and Recycling
6
7
Open Pit mining and Quarrying
8
9
Compaction equipment
– expect more
Easier...
Making your workday easier and more productive is
our highest priority. Starting, maneuvering and trans-
portation of products from our compaction range is
made easy with smart engineering solutions such as the
rammer air breather system, water distribution system
on the forward plates or the compact design of our roll-
ers with hydraulic transmission. User friendly design and
low hand/arm vibration makes work easier and increase
efficiency further.
10
11
compaction
equipment
Rammers
Applications:
• Compacting medium to deep layers of
cohesive soils, such as clay or silt but also
sand and gravel
• Repair jobs and in confined areas such as trenches,
around pillars and on housing sites
Advantages:
• High compaction efficiency
• Easy to operate
• Service friendly
• Low maintenance and low fuel consumption
Features:
• Sealed, multi-function tank with throttle control
(Stop/Idle/Run)
• Honda 4-stroke engine with new carburetor
• Patented air breather system for easy start
• Easy access to all daily service points
• Efficient shock absorbers
Rammers LT5004
6" 9"
Net mass kg 64 65
Operating mass kg 65 66
Frequency Hz 11 11
Amplitude mm 50-60 50-60
Speed m/min 15-18 15-18
Force/blow kN 10 10
H/A vibrations, standard handle m/s2 6,4 6,4
Sound power, guaranteed dB(A) 104 104
Sound pressure at operators ear dB(A) 91 91
Dimensions
Plate width mm 150 230
Plate length mm 330 330
LxWxH mm 730x395x1015 730x395x1015
Engine
Model Honda GX100
Rated power at 3600 rpm kW 2,2
Part number 3382 0000 05 3382 0000 04
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
12
compaction
equipment
230
Important: Full details 280
of measurements are280 280 &
available in the Operation 330
Maintenance Manuals of the product (ID number: ILT6004EN).
It 330 330 330
can be found on www.dynapac.com/en/partsandservices/dynadoc/ 330 330
730x395x1060 730x395x1060 730x395x1074 mm 810x422x1074 810x422x1074
13
Forward plate compactors
Soil compaction
Applications:
• Compacting thin to medium layers of
granular soils
• Block paving
• Repair jobs and maintenance work such as driveways,
sidewalks and parking lots
Advantages:
• High speed
• Operator comfort
• Easy transportation
• Longer service life
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
14
compaction
equipment
Features:
• Specially engineered bottom plate
• Unique vibration-reduced handle
• Removable, 13-liter water tank as option
• Wheels for easy transfer around work sites
• Stowable handle for easy transportation and storage
• Long life V-belt thanks to cooling fan and ventilated
cover
Options:
• Block paving kit (LF75-130)
• Fork lifting device (LF75-100, standard on LF130)
• Water tank. For upgrading soil plates to Soil & Asphalt
versions)
1)
transport wheels as option
15
Forward plate compactors
Asphalt compaction
Applications:
• Asphalt repair and maintenance work
such as d
riveways, sidewalks and parking lots
• Compacting thin to medium layers of granular soils
• Block paving
Advantages:
• High speed
• Operator comfort
• Easy transportation
• Longer service life
Features:
• Smart water distribution system
• Removable, 13-liter water tank
• Patented vibration-reduced handle
• Specially engineered bottom plate
• Wheels for easy transport around work sites
• Stowable handle for easy transportation and storage
Important: Full details of measurement is available in the Safety and Operating Instruction
of the product. It can be found on www.acprintshop.com.
16
compaction
equipment
LF100
Petrol Petrol. With extra weight Diesel
94,6 107,1 116,1
95 95 95
0,9 0,9 0,9
17 17 17
25 25 25
6,0 6,0 9,3
1,3 1,3 1,9
13 13 13
104 104 104
93 93 93
1)
transport wheels as option
17
Long-term investment
in efficiency
Sustainable value
Extra durable steel in the bottom plate, first-class com-
ponents throughout, modern engines with low fuel
consumption and emissions, self-cleaning design and pro-
tection frames around the engine all ensure long-lasting
machines with high trade-in values. At the end of the day,
you get the job done with good results. And in the long
run you get less maintenance, higher efficiency and a
lower life cycle costs.
18
19
compaction
equipment
Forward and reversible
plate compactors
Applications:
• Compacting medium to deep layers of
granular soils
• Confined areas, such as trenches, parking
lots and foundations, etc.
• Block paving
Advantages:
• High compaction efficiency
• Ergonomic and easy to operate
• Durable
• Long service life
• Time saving
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
20
compaction
equipment
Features:
• Hydraulic forward/reverse lever
• Hardox 400 steel in bottom plate
• Compaction indicator for LG400 (optional)
• Reduced hand/arm vibrations due to design of vibra-
tion damping handle
• Engines with low fuel consumption and emissions
• Heavy-duty protection frame and impact resistant steel
covers protect engine and transmission.
• Straps to secure the joints between bottom plate and
engine.
Options:
• Compaction indicator (LG400)
• Extension plates
• Block paving kits (LG 160-300 and LG500)
• Hour meter (LG500 el and LH700)
• Crank start kit (LG500)
• Transport wheels (LG160-300)
LG160 LG200
Diesel Petrol Diesel
330 mm 450 mm Manual start Electric start
167 174 215 229 245
169 175 217 231 247
80 80 65 65 65
1,4 1,4 1,9 1,9 1,9
28 28 36 36 36
22 22 25 25 25
2,4 2,4 3,5 3,5 3,5
108 108 105 108 108
92 92 90 90 90
21
Forward and reversible plate compactors LG300
Petrol
500 mm 600 mm
Net mass kg 263 268
Operating mass kg 265 270
Frequency Hz 68 68
Amplitude mm 1,7 1,7
Centrifugal force kN 40 40
Speed m/min 25 25
H/A vibrations, standard handle m/s2 2,4 2,4
Sound power, guaranteed dB(A) 108 108
Sound pressure at operators ear dB(A) 92 92
Dimensions
Plate width mm 500 600
Plate length mm 768 768
LxWxH mm 1385x500x1120 1385x600x1120
Engine
Model Honda GX270
Rated power at 3600 rpm kW 5,8
Part number 3382 0000 39 3382 0000 41
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
22
compaction
equipment
LG300
Diesel
Manual start Electric start
500 mm 600 mm 500 mm 600 mm
280 285 300 305
282 287 302 307
68 68 68 68
1,7 1,7 1,7 1,7
40 40 40 40
25 25 25 25
1,7 1,7 1,7 1,7
108 108 108 108
94 94 94 94
Hatz 1B30
4,2
3382 0000 37 3382 0000 40 3382 0000 38 3382 0000 36
650 650
967 967
1960x650x1150 1960x650x1150
23
Forward and reversible LG500 Diesel LG500 Diesel
plate compactors Manual start Electric start
550 mm 750 mm 550 mm 750 mm
Net mass kg 487 502 507 522
Operating mass kg 490 505 510 525
Frequency Hz 60 60 60 60
Amplitude mm 2,1 2,1 2,1 2,1
Centrifugal force kN 60 60 60 60
Speed m/min 24 24 24 24
H/A vibrations, std handle m/s2 3,4 3,4 2,1 2,1
Sound power, guaranteed dB(A) 109 109 109 109
Sound pressure at
dB(A) 96 96 91 91
operators ear
Dimensions
Plate width mm 550 750 550 750
Plate length mm 900 900 900 900
1660x550 1660x750 1660x550 1660x750
LxWxH mm
x1210 x1210 x1210 x1210
Engine
Model Hatz Supra 1D81Z Hatz Supra 1D81Z
Rated power at 3600 rpm kW 8,2 8,2 8,2 8,2
Part number 3382 0000 54 3382 0000 57 3382 0000 55 3382 0000 56
Part number
3382 0000 63
with extra plate 2x75
Part number
3382 0000 62
with extra plate 2x150
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
24
compaction
equipment
Round plate compactor
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
25
Duplex roller
Applications:
• Compacting thin layers of granular
soils, wet sand and asphalt.
• Jobs in confined areas, parking lots, repair works etc.
Advantages:
• High efficiency
• Reliable
• Long life
• Easy to operate
Features:
• Fully hydraulic
• Large, removable water tank
• Built-in oil cooler for increased lifetime of vital
components
• Heavy-duty protection frame with single lifting
point for easy transportation
• Minimum overhang and high curb clearance
• Powerful engine for reliable operations.
Duplex roller
Net mass kg
Operating mass kg
Frequency Hz
Amplitude mm
Centrifugal force kN
Speed, forward/reverse km/h
H/A vibrations, standard handle m/s2
Sound power, guaranteed dB(A)
Sound pressure at operators ear dB(A)
Dimensions
Drum diameter mm
Drum width mm
LxWxH mm
Engine
Model
Rated power, at 2600 rpm kW
Part number
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
26
compaction
LP6500 LP750 equipment
Diesel Diesel
Manual start Electric start Manual start Electric start
658 678 953 979
696 716 993 1009
61 61 63 63
0,45 0,45 0,5 0,5
21 21 25 25
0-3,6/0-2,3 0-3,6/0-2,3 3,6 3,6
4,3 4,0 4,0 4,0
107 107 109 109
90 90 90 90
27
Trench compactor
Important: Full details of measurement is available in the Safety and Operating Instruction
of the product. It can be found on www.acprintshop.com.
28
29
compaction
equipment
Compaction
capacity on asphalt
Machine Width Speed Surface capacity
mm m/min m2/h
Passes
2 4
LF75 420 27 240 120
LF75 500 24 252 126
LF80 420 34 300 150
LF100 500 25 262 131
1)
Max recommended layer thickness
Efficiency factor 1,0. Multiply the capacity above with your efficiency factor, within 0-1,0.
30
compaction
equipment
Machine Width Speed Surface capacity
mm m/min m2/h
Passes
2 4 6
LP6500 650 50 375 250 200
LP750 750 60 475 325 240
0,2 50 0,15 35
0,2 70 0,2 70
0,3 75 0,1 25 0,3 75 0,25 65
31
Pokers
32
33
concrete
equipment
Electronic pokers
Features:
• Cable in the hose
• 20 m reach around the plug
• High protection level
Electronic Pokers
SMART
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
34
equipment
concrete
Electronic Pokers
SMART-E
Devibrated handle
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
35
Electric pokers
Features:
• Thermo switches
• 20 m reach around the plug
• Low voltage 42V-3-200Hz
AN Pokers
Electric Poker
Vibrators
AN Pokers AN40 AN48 AN56 AN65 AN90
Tube diameter mm 40 48 56 65 90
Tube length mm 320 350 380 410 566
Tube weight kg 2,3 4,2 5,2 7,9 18
Ampere at 42V A 5 11 13,5 21 21
Vibration value m/s2 3,7 4,33 4,47 4,24 5
Noise level dB(A) 78 76 79 79 76
Part number 4812 0508 454812 0508 464812 0508 474812 0508 484812 0508 79
All AN pokers
Cable length m 15
Frequency vpm 12000
Voltage V/Hz 42-3-200
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
36
equipment
AN-E Pokers
concrete
Electric Poker Vibrators
Devibrated handle
AN-E Pokers AN28E AN40E AN48E AN56E
Tube diameter mm 28/40 40 48 56
Tube length mm 239/211 320 350 380
Tube weight kg 2,4 2,1 4,1 5,1
Hose length m 0,5 0,5 0,5 0,5
Cable length m 15 15 15 15
Frequency vpm 12000 12000 12000 12000
Voltage V/Hz 42-3-200 42-3-200 42-3-200 42-3-200
Ampere at 42V A 4 5 11 13,7
Vibration value m/s2 0,52 0,51 0,61 0,96
Noise level dB(A) 78 78 76 79
Part number 4812 0508 44 4812 0508 93 4812 0508 94 4812 0508 95
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
AX Pokers
Electric Poker Vibrators
AX Pokers AX36 AX40 AX48 AX56 AX65
Tube diameter mm 36 40 48 56 65
Tube length mm 322 320 350 380 410
Tube weight m 2,1 2,1 4,1 5,1 7,7
Cable length m 10 10 10 10 10
Voltage V/Hz 42-3-200 42-3-200 42-3-200 42-3-200 42-3-200
Frequency vpm 12000 12000 12000 12000 12000
Ampere at 42V A 6,2 4,5 10 11,7 19
Vibration value m/s2 3,9 3,5 2,26 4,38 4,11
Noise level dB(A) 70 78 76 79 79
Part number 4812 0508 27 4812 0508 28 4812 0508 29 4812 0508 30 4812 0508 31
Important: Full details of measurement is available in the Safety and Operating Instruction
of the product. It can be found on www.acprintshop.com.
37
AX-C Pokers
Electric Poker Vibrators
Rigid cane
AX-C Pokers AX36C AX40C AX48C AX56C
Tube diameter mm 36 40 48 56
Tube length mm 322 320 350 380
Tube weight m 2,1 2,1 4,1 5,1
Frequency vpm 12000 12000 12000 12000
Voltage V 42V-3-200 Hz 42V-3-200 Hz 42V-3-200 Hz 42V-3-200 Hz
Ampere at 42V A 6,2 4,5 10 11,7
Vibration value m/s2 2,1 3,81 3,53 3,66
Noise level dB(A) 78 76 79
Part number
Cane 500 mm 4812 0508 32 4812 0508 33 4812 0508 34 4812 0508 35
Cane 1000 mm 4812 0508 36 4812 0508 37 4812 0508 38 4812 0508 39
AXE Pokers
Electric Poker Vibrators
Devibrated handles
AXE Pokers AX40E AX48E AX56E
Tube diameter mm 40 48 56
Tube length mm 320 350 380
Tube weight m 2,1 4,1 5,1
Frequency vpm 12000 12000 12000
Ampere at 42V A 4,5 10 11,5
Vibration value m/s2 0,51 0,61 0,96
Noise level dB(A) 78 76 79
Part number 4812 0508 40 4812 0508 41 4812 0508 42
AXP Pokers
AXAU Pokers
Electric Poker Vibrators
Paver (P) and Slipring (AU) versions
AXP/AXAU Pokers AX65P AX48AU
Tube diameter mm 65 52
Tube length mm 410 350
Tube weight m 7,7 4,1
Frequency vpm 12000 12000
Voltage V 42V-3-200 Hz 42V-3-200 Hz
Ampere at 42V A 19 10
Noise level dB(A) 79 76
Part number 4812 0508 43 4812 0508 80
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
38
Vibrastar pokers
equipment
concrete
designed for medium to
high slump concrete. To save
you both time and money
the Vibrastar is as efficient
when it comes to concrete
vibration as it is on energy
consumption.
Features:
• No need of compressor
• Easy to handle switch box
• Low voltage 42V-3-200Hz
Vibrastar Pokers
Electric Poker Vibrators
Devibrated handles
Vibrastar Pokers Vibrastar 40 Vibrastar 50 Vibrastar 60
Tube diameter mm 40 48 60
Tube length mm 255 284 330
Tube weight m 1,84 3,06 5,1
Frequency vpm 12000 12000 12000
Ampere at 42V A 4 8 11
Vibration value m/s2 1,8 3,28 3,23
Noise level dB(A) 86 87 95
Part number 4812 0508 49 4812 0508 50 4812 0508 51
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
39
Frequency
converters
The electric frequency converter can
supply several pokers with power at
the same time. No fumes, less noise
and low weight are other appreci-
ated properties, as well as the stable
power output without any variation.
Features:
• Stable frequency and speed
• Up to four outlets
• Low weight
40
Racoon pokers
equipment
concrete
be combined with 4 poker heads and 5 flexible shafts.
Features:
• High speed
• High power
• Flexible shafts
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
41
Mechanical pokers
Features:
• Conical shaped pendulum raceway
• High speed
• Long hose
• Simple design – easy to dismantle
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
42
Drive units
equipment
concrete
Atlas Copco offers a wide range of drive units with gaso-
line, diesel and electric options. Electric motors feature
strong casings, great internal shock absorption and built
in flywheel to prevent the three-phase motors from run-
ning in the wrong direction.
Features:
• Low fuel consumption
• Strong casings
AM15, AM18,
Drive units AF21 AG21
Lombardini Honda
Energy Diesel Petrol Electric Electric
Power kW 3,0 3,2 1,3 1,1
Speed rpm 2900 2900 2850 2850
Vibration value kg 46 23 18,5 21
Noise level dB(A) 79 72,8 72,5 74,5
Part number 4812050875 4812050876 - -
110V-1-50/60Hz - - - 4812050868
230V-1-50/60Hz - - - 4812050867
230/400V-3-50/60Hz - - 4812050866
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
43
Pneumatic pokers
Features:
• No moving parts in the hose
• Cooled by the compressed air.
• One compressor can drive several pokers.
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
44
equipment
concrete
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
45
External vibrators
Cost effective
Good concrete vibration and excellent results thanks
to flexible, high centrifugal force. In order to increase
flexibility and cost efficiency, ER207B, ER407B and
ER507B vibrators are mounted on quick release brackets
for easy portability, thus fewer units are required. High-
end components and materials keep life cycle and
maintenance costs down.
46
equipment
concrete
To cover your need of external vibration Atlas Copco offer
a wide range of equipment, from high speed pneumatic
to normal frequency electric vibrators – all with adjustable
centrifugal force.
Features:1)
• Integrated noise reducer
• Adjustable bracket mounting
• Adjustable centrifugal force
ER
Electric External Vibrators
High speed 6000 rpm
ER207B ER407B ER507B
Max centrifugal force N 7 400 11000 16000 N
Voltage Hz 42V-3-200 42V-3-200 2) 42V-3-200
Intensity A 12,5 16,5 23,5
Weight kg 10,5 15,5 23,2
Bracket attachment VT2 VT4 VT4
Noise level dB(A) 69 84,5 85
Part number
42V-3-200Hz 4812 0509 80 4812 0509 81 4812 0509 82
250V-3-200Hz 4812 0509 84
Bracket 4700 1025 69 4700 1019 70 4700 1019 70
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
1)
varies between the different models
2)
250 V available upon request
47
ER
Electric External Vibrators
Normal speed 3000 rpm
ER105 ER205 ER305 ER405
Max centrifugal force N 500 1400 3000 6000
Intensity at 230/400V A 0,16/0,09 0,3/0,18 0,7/0,4 1,8/1,09
Weight kg 2,7 4,3 11 20
Noise level dB(A) 55 56 57 57
Part number 4812 0509 10 4812 0509 20 4812 0509 30 4812 0509 40
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
EP
Pneumatic Vibrators, High speed
EP121B EP271B EP371B EP601B
Speed rpm 9000 9350 rpm 9350 rpm 8800 rpm
Max centrifugal force N 8100 10350 N 26800 N 31500 N
Air consumption l/min 1200 1200 l/min 1400 l/min 1400 l/min
Weight kg 9,5 10 kg 16,5 kg 18 kg
Bracket attachment VT2 VT2 VT4 VT4
Noise level dB(A) 90 90,8 dB(A) 95 dB(A) 100 dB(A)
Part number 4812 0509 86 4812 0509 87 4812 0509 88 4812 0509 89
Bracket 4700 1025 69 4700 1025 69 4700 1019 70 4700 1019 70
Important: Full details of measurement is available in the Safety and Operating Instruction
of the product. It can be found on www.acprintshop.com.
48
EB
Ball Vibrators
EB10, at 2 bar – 29 psi 4 bar – 60 psi
Speed rpm 20000 22000
Centrifugal force N 228 273
equipment
concrete
Air consumption l/min 112 168
Noise level dB(A) 74 74
Part number 4700 3652 86 4700 3652 86
49
Screeds
Great result
Our single beam screeds are very effective and easy to
use thanks to low weight and ergonomic features such as
a telescopic handle that allows the operator to work from
outside the slab. We also offer double beam screeds with
powerful in-depth action, lightweight aluminum design for
ease of handling and excellent balance for level floors. For
the really big challenges, such as floors up to 25 meters
wide we have the robust, yet flexible, modular screeds
that are easily assembled by a single operator. The BT90
provides really deep vibration effect. Thanks to the heavy
steel frame it can remove air voids down to a depth of
20 cm.
50
51
concrete
equipment
Single beam screeds
Features:
• Lightweight aluminium design
• Rigid screed blade
• Easy to clean
BV20
Single beam screeds
BV20H
Single beams BV20E BV20G BV20H
ext. tube
Working width m 2,0 2,0 2,0 -
Weight operating kg 18 14,8 7,4 1,5
Length handle m 1,8+1,8 1,8+1,8 1,8+1,8 1,8
Energy Electric Petrol Manual -
230V-1-50/60 4-stroke
Motor - -
Hz Honda GX25
0,7 (1,0)
Power kW (hp) 0,27 - -
at 7000 rpm
Vibration frequency Hz 166 up to 166 - -
Centrifugal force N 2000 max 1100 - -
Vibration value m/s2 - 3,2 - -
Noise level dB(A) - 91 - -
Part number 4812 0511 49 4812 0511 51 4812 0511 54 4700 0022 59
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
52
equipment
concrete
BV30
Single beam screed
1)
The driving unit is delivered without screed blades which needs to be ordered separately
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
53
Double beam screeds
Features:
• Turnable drive unit
• Made of non-corrosive aluminium
• Adjustable tensioning rods
• Easy to clean
• Quick clamping for rapid change of vibrating unit
BD
Double beam screeds
1)
Two sections for easier transportation
Weight kg 19 19 19 19
Suitable for beam BD32 – BD62 BD32 – BD62 BD32 – BD62 BD520 – BD800
Noise level dB(A) 94 94 94 94
Vibration value 2) m/s2 2,5 2,5 2,5 2,5
Part number 4812 0508 96 4812 0511 18 4812 0511 17 4812 0508 97
2)
Vibration value measured at the rope handle which is connected via a rope to the beam.
Vibration value at the fixed beam handle is 25m/s2
54
equipment
concrete
BD520 BD620 BD720 BD800 BD802 1) BD842 1) BD942 1)
150 150 150 150 150 150 150
300 300 300 300 300 300 300
5,2 6,2 7,2 8,0 8,0 (2 x 4m) 8,4 (2 x 4,2m) 9,4 (2 x 4,7m)
4812 0509 03 4812 0509 04 4812 0509 05 4812 0509 06 4812 0509 07 4812 0509 08 4812 0509 09
Important: Full details of measurement is available in the Safety and Operating Instruction
of the product. It can be found on www.acprintshop.com.
55
Modular screeds
Features:
• Screeds sections in different lengths
• Electric, pneumatic or petrol driven
• Easy cleaning
BT90
Modular Screed – Drive section 1)
Drive section Drive section Drive section
Electric Petrol Pneumatic
Length mm 720 720 278
Width mm 535 620 585
Height mm 980 980 970
Frequency rpm 2865 2900 -
Input kW 3 5,5 -
1)
Opposite-end section is delivered with the drive sections.
BT90
Modular Screed – Screed section
Screed sections, Screed sections, Screed sections,
1 m section 2 m section 3 m section
Length mm 1095 2095 3095
Width mm 420 420 420
Height mm 376 376 376
Part number
Pneumatic 4812 0509 98 4812 0510 00 4812 0510 02
Electric/Petrol 4812 0509 97 4812 0509 99 4812 0510 01
56
equipment
concrete
BT90
Accessories
Crown Invert
Skate
0,5 m Outrigger bracket (only
(complete set
extension (with rollers) for pneumatic
with adaptor)
sections)
Length mm 500 372 - -
57
Formwork rails
Features:
• Different length screeds
• Plastic adjustment screws
• Lightweight
Type F2 FR 270*
Part number 4700 0443 66 4700 0325 10
*)
Use with F2
CombiForm
Model CombiForm, 25 mm 1) CombiForm, 45 mm 1) CombiForm, 65 mm 1)
Type C 25 C 45 C 65
Length m 3,5 3,5 3,5
Height mm 25 45 65
H-1 mm - 30 28
H-2 mm - - 47
H-3 mm - -
Width mm 80 90 105
Weight kg/m 0,80 0,85 1,10
Part number 4700 0021 36 4700 0019 72 4700 0019 91
1)
Note! Combiform must be ordered in multiples of 35 units. example; 35, 70, 105 etc
58
equipment
concrete
Support Tube, Dia 35 mm, Track Rail 100x50x3 mm,
in 6 m length L= 6 m
TB 35* Rail
4700 0007 22 4700 0006 56
59
Trowels
60
61
concrete
equipment
Edger trowels
Features:
• Safety belt-clutch with direct stop
• Variable speed on petrol models
• Adjustable handle
• Quick release blades available
• Rotating protection ring
• Easy to clean
BG240 Power Trowels
Walk-behind trowels,
Petrol and electric versions
Edger trowels BG240
Protection ring diameter mm 615
Operating weight kg 59
Blade diameter mm 600
Disc diameter mm 610
Floating blade diamter mm -
Blade speed rpm 40-115
Number of blades 4
Type of handle Short foldable
Pitch control Twist-Pitch
Engine Honda GX120 (4-stroke)
Power kW (hp) 2,9 (4,0)
Fuel Petrol
Fuel tank capacity l 2,5
Lifting hook Standard
Transport wheels Accessory
Blade arm type Bolt-on
Vibration value m/s2
Noice level dB(A)
Model code H4-S-TP
Part number 3382 0000 99
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
62
equipment
concrete
BG240 BG240 BG240
615 615 615
59 59 59
600 600 600
610 610 610
- - -
40-115 120 120
4 4 4
Short foldable Short foldable Short foldable
Quick-Pitch Twist-Pitch Quick-Pitch
Honda GX120 (4-stroke) 230V-1-50/60Hz 230V-1-50/60Hz
2,9 (4,0) 1,5 (input) 1,5 (input)
Petrol - -
2,5 - -
Standard Standard Standard
Accessory Accessory Accessory
Bolt-on Bolt-on Bolt-on
63
Power trowels
Features:
• Safety belt-clutch with direct stop
• Variable speed on petrol models
• Adjustable handle
• Quick release blades available
• Easy to clean
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
64
equipment
concrete
65
Combi trowels
Features:
• Adjustable handle
• Easy cleaning
• Built in carrying handle
• Transport wheels standard
• Two speed selection
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
66
ORKA Concrete and
Asphalt floor saws
equipment
concrete
with all major controls – such as on/off
switch, throttle control and in depth
control placed together for easy use.
Features:
• Large water tank
• Two disc sizes possible
• Easy service and cleaning
Diamond disks for floor saws
Type 350F 350C
Blade diameter mm 350 350
Pcs/pack 5 5
Blade type For fresh concrete For old concrete
Part number 4700 3685 94 4700 3685 93
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product. It can be found on www.acprintshop.com.
67
Handheld pneumatics
HAPS™ system
By reducing the in-use vibration value of the machine,
Atlas Copco’s HAPS™ system helps to decrease the
negative effects of harmful vibration at a given trigger
time.
SOFSTART™ trigger
The two-step trigger gives the operator full control when
starting a cut – even under difficult conditions. Available
with selected tools only.
Integrated lubricator
Helps to minimize tool wear and is excellent for cold
conditions, when it can be used for anti-freeze, such
as Atlas Copco Breaker and Hammer AIR-OIL. It holds
enough lubricant for an entire shift. Available with
selected tools only.
68
69
handheld
pneumatics
Pneumatic vibro-reduced
hammers TEX 05-TEX 12
6,5-12 kg
Features:
• Full canopy vibro-reduction (TEX 05, 09 and 12)
• Noise-reduction
• SOFSTART™ two-step trigger
• HAPS™ Hand and Arm Protection System
• Air cushioned piston (TEX 05, 09 and 12)
• Easy handling and positioning
70
pneumatics
handheld
1)
Claw couplings not included in delivery of TEX 05, 09 and 12.
2)
Front side handle included
3)
Important: Full details of measurement are available in the Safety and Operating
Instruction of the product (part no 9800 0812 90, TEX 07PE in 9800 0653 90).
They can be found on www.acprintshop.com
71
Pneumatic standard
hammers TEX 3-TEX 12
3,5-12,5 kg
Features:
• SOFSTART™ two-step trigger (selected models)
• Noise-reduction
• Air cushioned piston
72
pneumatics
handheld
Suitable couplings:
TEX 09, 10 and 12 Atlas Copco Standard 9000 0306 00
Atlas Copco Standard with strainer 9000 0306 01
US Standard (not for TEX 10) 9001 0005 06
TEX 05, TEX 3 Atlas Copco Standard 9000 0305 00
73
Pneumatic breakers
TEX 140-TEX 280
15-31 kg
Applications:
• Light and medium sized breakers for service jobs
and general demolition in soft and medium hard
materials
74
pneumatics
handheld
TEX 190PE TEX 220PS TEX 230PE TEX 270PS TEX 280PE
YES YES NO NO NO YES YES YES NO NO YES YES
22,5 23 22 23,5 23,5 25,5 27 27 28 28 31,5 31,5
595 645 625 670 670 625 670 670 690 690 690 690
26 26 30 30 30 30 30 30 32 32 32 32
1500 1500 1320 1320 1320 1320 1320 1320 1230 1230 1230 1230
3,7 3,7 12,8 12,8 12,8 4,2 4,2 4,2 14,9 14,9 4,8 4,8
104 104 104 106 106 104 106 106 105 105 105 105
92 91 92 93 93 92 93 93 92 92 92 92
25x108 28x160 25x108 28x160 32x160 25x108 28x160 32x160 28x160 32x160 28x160 32x160
75
Pneumatic breakers
TEX 20-TEX 21
20-21 kg
Applications:
• Medium sized breakers for service jobs and
general demolition in medium hard materials
like asphalt and concrete
Features:
• Noise-reduction
• HAPS™ Hand and Arm Protection System
(PE series)
• Air cushioned piston
• Hard hitting in relation to their weight due
to extra long piston stroke
Pneumatic breakers TEX 20PS TEX 20PS-1 TEX 21PE TEX 21PE-1
Weight kg 20 20 21 21
Length mm 635 600 650 615
Air consumption l/s 25 25 25 25
Impact rate blows/min 1140 1140 1140 1140
Vibration level 3
m/s² 18,3 18,3 7,6 7,6
axes (ISO 20643) 1)
Sound power level
guaranteed Lw, dB(A) 105 105 105 105
(2000/14/EC) 1)
Sound pressure level
Lp, r=1m 93 93 93 93
(ISO 11203) 1)
R 25x75 w. R 25x75 w.
Shank size mm H 25x108 H 25x108
square collar square collar
Part number 8461 0224 20 8461 0224 21 8461 0224 22 8461 0224 23
76
Pneumatic breakers
TEX P60-TEX P90
33-43 kg
Applications:
• Heavy-duty breakers for use in medium and hard
materials such as asphalt and concrete
• TEX P60: asphalt and other medium hard materials
• TEX P90: hard/reinforced concrete
pneumatics
handheld
Features:
• Solid Body concept
• Noise-reduction
• SOFSTART™ two-step trigger
• Rotating air inlet swivel
• Integrated lubricator
• Air cushioned piston
77
Pneumatic breakers
TEX 32-TEX 40
34-42 kg
Applications:
• Heavy-duty demolition breakers for use in
medium and hard materials such as asphalt and
reinforced concrete
Features:
• Noise-reduction
• HAPS™ Hand and Arm Protection System (PE series)
• Rotating air inlet swivel
• Integrated lubricator
• Air cushioned piston
78
pneumatics
handheld
79
Pneumatic pumps
Applications DIP:
Centrifugal pumps designed for
clean, low-viscosity liquids such as
water.
Applications DOP:
Diaphragm pump designed for construction, mining and
industrial applications or process industry
• Polluted media
• Viscous media
• Highly abrasive or inflammable fluids
• 15N: mainly for construction industry
• 15F: mainly for process industry
Features:
• Robust
• Cannot be damaged by overloading
80
Pneumatic combi drills/
hammers
Applications:
• Plug hole drilling 8-38 mm
diameter
DKR 36 Kit
• Wedge hole drilling
• Chipping and scaling
• Renovation and rebuilding
pneumatics
handheld
• Underwater work
Features:
• Built-in air flushing
• Noise-reduction
• Switching between drilling/chipping
by change of working tool
• Built-in lubricator
¹) 19 mm drill in granite
²) 19 mm drill in concrete
3) Important: Full details of measurement are available in the Safety and Operating Instruction
of the product (part no 9800 0938 90). It can be found on www.acprintshop.com
4) Also available in carrying case as complete set (8463 0103 61)
81
Pneumatic rock drills
Applications:
• Drill up to 2 m depth
• Plug hole drilling
• Anchor and wedge hole drilling
Features:
• Noise-reduction (S-versions)
• HAPS™ Hand and Arm Protection System (E-versions)
• Built in air flushing
• Trigger version available (ET)
82
pneumatics
handheld
D = D-handle
T = T-handle
E = vibro-reduced handles
ET = vibro-reduced handles, trigger start
C = cap
S = silenced
83
Pneumatic rock drills
Applications:
• Drill up to 6 m depth
• Production drilling in quarry/dimension
stone industry
• Blast hole and secondary drilling
Features:
• Noise-reduction (S-versions)
• HAPS™ Hand and Arm Protection System (E-versions)
• Built in air flushing
• Extra flushing for quick and efficient hole cleaning
84
pneumatics
handheld
E = vibro-reduced handles
S = silenced
85
Rock drills
Underground + feed legs
Applications:
• Production drilling
• Mining and construction
• Dimension stone industry
Features:
• High quality, designed for production drilling
• Noise-reduction (16 WS, 34 WS, 94 WE)
• Built in water flushing
• ATEX certification (BBC 34 WS, BMK 91RS)
• Single or double telescopic pusher legs
Important: Full details of measurement is available in the Safety and Operating Instruction
1)
86
pneumatics
handheld
BBC 34W BBC 34 WS BBD 94W BBD 94WE BBD 94WS RH 656W
Silenced Silenced ATEX
version version
27-41 27-41 27-41 27-41 27-41 27-41
33,5 34,5 28 28,5 31 22
775 775 670 670 670 658
88 88 97 97 97 48
2280 2280 3300 3300 3300 2040
80 80 90 90 90 65
70 70 45 45 45 59
20,4 20,4 15 15 15 21,2
127 120 125 120 125 120
116 109 114 109 114 115
8311 0408 05 8311 0303 47 8311 0206 09 8311 0303 44 8311 0206 12 8311 0303 45
Get more information about Cost-Per-Meter contracts for large fleet owners.
Please contact your Atlas Copco sales representative for further information.
Double telescope
ALF 72D-1 BMK 62S BMK 91RS ALF 67/80 ALF 67/80D
BBD 94W RH 656W BBD 94WS BBC 16W, 343W BBD 94W
1200 1300 1300 1855 1855
1830 1815 1870 1495 1595
3030 3115 3170 3350 3450
16 17 24 17 19
70 53 67 67/80 67/80
8321 0201 81 8321 0102 02 8321 0104 27 8321 0201 85 8321 0201 69
87
Rock drills
Stopers
Applications:
• Raise driving and bolting
• Screening
Features:
• High quality, designed for production drilling
• Front flushing of drill steel to keep water and cuttings
out from the drill (BBC 34)
• Clock wise rotation for bolting (BBD 46 WR)
Important: Full details of measurement is available in the Safety and Operating Instruction
1)
88
pneumatics
handheld
89
Rig-mounted pneumatic
rock drills
Applications:
• Dimension stone industry (DSI)
• Marble and granite quarries
• Cable or chain feed drilling
Features:
• Noise-reduction (BBC 34 DSI)
• Efficient air flushing
• Can be converted to water flushing
• production drilling
1)
Important: Full details of measurement are available in the Safety and Operating
Instruction of the product (part no 9800 0669 71 & 9800 0829 71). It can be found on
www.acprintshop.com
90
91
handheld
pneumatics
Handheld hydraulics
Easy to own
There’s not much that can go wrong with an Atlas Copco
hydraulic tool. With just two moving parts, lubricated
continously by the hydraulic oil, there’s minimal wear and
very few parts to replace. Hydraulics are by nature reli-
able: Working in a closed loop, dirt and moisture are kept
out. And with the no-spill, flat-face couplings, it’s easy to
keep the system clean and to ensure correct connection.
92
93
handheld
hydraulics
Hydraulic power packs
Features:
• Portable, compact and light weight
• High efficiency, low noise and low fuel
consumption thanks to Power On Demand function
(available with selected models only)
• Low maintanance, long lifetime – moving parts move
in a closed lubricated circuit
• Protective steel frame with foldable handles
• Lifting eye and cross lifting bar
• No exhaust or emission from the tools – power pack
with engine can be placed away from tool
• Large return filter and replacement indicator
• Thermostatically-controlled oil cooler
1)
Non CE noise approved version
2)
7 m extension twin-hose comes as standard with LP 9-20 P and LP 13-30 P
94
hydraulics
Petrol Diesel driven Electric driven handheld
88 - 79 86 86 86
C/E C C D E C/E
1807 0160 16 - 1807 0080 15 1807 0160 43 1807 0160 42 1807 0160 22
3)
Important: Full details of measurement is available in the Safety and Operating
Instruction of the product. It can be found on www.acprintshop.com
95
Hydraulic standard hammer
and breakers
Applications:
• Breaking light concrete and brickwork
(LH 11)
• Medium and hard materials as LH 11
asphalt and concrete Pick hammer
Features:
• Low noise levels
• Slim design
• High power to weight ratio
• High back pressure (HBP) versions for skid steer
connections
1)
Weights for LH 180 with Hex 25, LH 220, LH 270, LH 390 with Hex 32.
2)
Lengths for LH 180 with Hex 25, LH 220, LH 270, LH 390 with Hex 32
96
hydraulics
LH 220 LH 220 HBP 5) LH 270 LH 270 HBP 5) LH 390 LH 390 HBP 5) handheld
3)
Important: Full details of measurement are available in the Safety and Operating Instruction
of the product (part no 3392 5206 90). It can be found on www.acprintshop.com
4)
Front handle as option
5)
HBP: High Back Pressure
97
Hydraulic vibro-reduced
breakers
Applications:
• Medium and hard materials as
asphalt and concrete
Features:
• Vibro-reduction
• Vibro-damping chisel bushing
• Low noise levels
• Slim design
• High power to weight ratio
• High back pressure (HBP) versions for skid steer
connections
Breakers LH 190 E
Weight 1) kg 25
Length 2) mm 650
Oil flow l/min 20
Working pressure bar 95-110
Return line pressure max bar 10
Impact rate blows/min 1400
Vibration level 3 axes (ISO 20643) 2) 3) m/s² -
Sound power level guaranteed (2000/14/EC) 3) Lw, dB(A) 107
Sound pressure level (ISO 11203) 3) Lp, r=1m 93
EHTMA class C
1)
LH 190 E with Hex 25, LH 230 E, LH 280 E and LH 400 E with Hex 32.
2)
Lengths for LH 190 E with Hex 25, LH 230 E, LH 280 E, LH 400 E with Hex 32
98
hydraulics
handheld
3)
Important: Full details of measurement are available in the Safety and Operating Instruc-
tion of the product (part no 3392 5206 90). It can be found on www.acprintshop.com
4)
HBP: High Back Pressure
99
Hydraulic rock drill
Applications:
• Drills down to 6 m depth and
up to 50 mm diameter:
• Blast holes
• Anchor holes
• Rock-splitting holes
Features:
• Torque limiter prevents operator kick-back
• Anticlockwise rotation as option
• A drifter version for separate operation of
impact and two way rotation is available.
1)
At 25 l/min.
2)
Important: Full details of measurement is available in the Safety and Operating Instruction
of the product (part no 3392 5013 01). It can be found on www.acprintshop.com
100
Hydraulic pumps
Applications:
Pumping of clean or
contaminated water and slurry:
• On building sites
• In flooded excavations
• In cellars
• In wells
Features:
• Spark proof motor
• Can run dry
• Including 10 m discharge hose
with quick coupling
hydraulics
handheld
See also Parts and Services Catalogue:
• Oil flow dividers
• Extension hoses
101
Hydraulic
core drills
Applications:
• Safe handheld drilling in reinforced concrete and
asphalt up to 200 mm diameter in confined spaces, for
ventilation, heating, gas piping and other installations
• Works efficient also in underwater applications
Features:
• High power to weight ratio
• Low vibrations
• Low kick-back
• Hydraulic torque control
• Fits in standard drill stands
• Closed hydraulic circuit
• Comes in carrying steel case as standard
1/2” BSP male x 1 1⁄4 UNC male drive adaptor included for use of larger diameter core bits.
1)
2)
Important: Full details of measurement is available in the Safety and Operating Instruction of
the product (part no 3392 5189 90). It can be found on www.acprintshop.com
102
Hydraulic cut-off saws
Applications:
• Cuts 133-160 mm depth
• Works in dust, slurry and
underwater
• Used for cutting:
• Concrete, reinforced concrete
• Asphalt
• Steel
• Used with:
• Dry and wet diamond discs
• Abrasive steel cutting discs
hydraulics
handheld
Features:
• Simple design with direct drive motor
• Open visible cutting face
• High power-to-weight ratio
• Compact and slim design
Cut-off saws LS 14 LS 16
Weight including hoses kg 12 13
Oil flow l/min 20-30 20-40
Max oil pressure bar 170 170
Revolutions rpm 2500-4000 2000-4000
Speed m/s 46-75 42-85
Disc size mm 355 405
Arbor size mm 25,4 25,4
Cutting depth mm 133 160
Vibration level 3 axes (ISO 20643) 1) m/s² 4,9 4,9
Sound power level guaranteed (2000/14/EC) 1) Lw, dB(A) 99 115
Sound pressure level (ISO 11203) 1) Lp, r=1m 86 102
EHTMA class C/D C/D/E
Part number 1809 0140 01 1809 0160 00
Important: Full details of measurement is available in the Safety and Operating Instruction
1)
103
Hydraulic post drivers
Applications:
• Drives up to 96 mm diameter poles
• For driving of:
• Road barriers
• Tubes / profiles
• Signposts
• Fences
• Anchors
Features:
• Available with built in on/off valve or
hose mounted remote on/off valve
Open- or closed-
Hydraulic system Open centre centre
Weight including hoses kg 32 33
Service weight with adaptor kg 34 34,5
Working pressure bar 105-140 105-140
Oil flow l/min 20-30 20-30
Impact rate at 30 l/min blows/min 1680 1680
Hydraulic ports ½" BSP ½" BSP
Vibration level 3 axes (ISO 20643) 1) m/s² 12,8 -
Sound power level guaranteed (2000/14/EC) Lw, dB(A) 115 115
Sound pressure level (ISO 11203) 1) Lp, r=1m 102 102
EHTMA class C/D C/D
Part number 1801 4040 02 1801 4050 02
Important: Full details of measurement is available in the Safety and Operating Instruction
1)
104
Hydraulic post puller
Applications:
• For removal of any pole, steel beam or
tube with diameters up to 200 mm
• For removing of:
• Wooden posts
• Steel posts (incl IPE, HPE and UPE profile)
• Round/square steel tubes
• Fence posts
• Anchors
Features:
• Integrated jaw
• Automatic chain tightening clamp
hydraulics
handheld
• Total pulling force up to 10 tons
1)
Lever kit, part number 3371 8101 48
105
Hydraulic ground rod
drivers
Applications:
• Drives earth connectors to depths of
10-15 m
• Light fencing and spike/anchor driving
Features:
• Standard chuck sizes for up to 16 mm and 25 mm rods
• Hose mounted on/off valve for easy driving of long
rods
Important: Full details of measurement is available in the Safety and Operating Instruction
1)
106
ydraulic posthole borer
H
Handheld and
rig-mounted
Applications:
• Drilling preparations for:
• Fence posts
• Planting holes LPHB LPHB-M
• Signpost holes
• Drilling depth down
to 1,5 m
hydraulics
handheld
• Adjustable rotation • Quick change of auger
speed and torque limiter without any tools
• Quick change of auger
without any tools
1)
Without auger and top plate
2)
At 140 bar
3)
Important: Full details of measurement is available in the Safety and Operating Instruction
of the product (part no 3392 5115 01). It can be found on www.acprintshop.com
107
Petrol breakers/drills
108
Cobra Combi Cobra Pro/TT
handheld
petrol
for drilling and for breaking and
breaking tamping
Important: Full details of measurement are available in the Safety and Operating Instruc-
2)
tion of the product (part no 9800 0956 90 (Cobra Pro/TT), 9800 0955 90 (Cobra Combi) ).
They can be found on www.acprintshop.com
109
Hydraulic breakers
DustProtector II
The DustProtector II is a unique two-stage sealing
system, helping to reduce the penetration of rock dust
and debris into the lower breaker section. Operations
can be more long-term and trouble-free, especially under
very dusty working conditions. This unique, protective
feature is available on all MB & HB hydraulic breakers.
All breakers in the SB range are protected by a dust
protection ring.
ContiLube™ II
The automatic lubrication system offers an optimal and
cost-effective lubrication. It is a fixed component that is
directly attached to the breaker, working autonomously
and easily accessible without long hose connections. All
connection ports are protected in the breaker housing.
The filling level of the cartridge can always be monitored
by the operator since its position on the breaker is within
his field of vision. All breakers of the MB and HB series
are equipped with ContiLube™ II as standard. SB breakers
can be equipped with ContiLube™ II micro (option)
110
AutoControl
AutoControl helps to boost the performance of Atlas
Copco breakers. The system a utomatically controls the
breaker output to suit the working conditions and rock
hardness, thereby creating a highly effective tool for
users: maximum blow frequency for soft materials and
maximum single-blow energy when things get tougher.
Standard for breakers from MB 1000 upwards and all HB
breakers.
rig-mounted
breakers
StartSelect™
The StartSelect system comprises two functions for start
and stop which allow the start-up and shut-off behaviour
of the breaker to be set in line with the actual working
conditions: the AutoStart mode for jobs in unstable
ground, the AutoStop mode for jobs on firm grounds.
This allows the operator to work extremely efficient.
StartSelect™ is standard from MB 1200 upwards and on
all HB breakers.
PowerAdapt
Since excessive oil pressure is extremely damaging for a
hydraulic breaker, PowerAdapt helps to prevent overloads
by switching off the attachment, thereby reducing
downtimes and repair costs. PowerAdapt is standard
for all HB breakers. All breakers in the SB range are
protected by an overload protection valve.
111
Light hydraulic breakers
55-520 kg
Applications:
• Road construction
• Smaller trenching and demolition jobs
• Building renovation
• Landscaping
• Boulder size reduction in quarries
Features:
• Energy Recovery
• Solid Body concept
• Noise reduction
• Dust protection
• Overload protection valve
• Double tool retainer bars
• Integrated maintenance free accumulator
Option:
• ContiLube™ II micro
1)
Weights apply to standard carriers only. Any variances must be agreed
with Atlas Copco and/or the carrier manufacturer prior to attachment.
2)
Breaker with standard adapter plus working tool and screw kit.
112
rig-mounted
breakers
3)
Important: EN ISO 3744 in accordance with directive 2000/14/EC. Full details of
measurement are available in the Safety and Operating Instruction of the product
(part no 9800 0648 90). It can be found on www.acprintshop.com
113
Medium hydraulic breakers
750-1700 kg
Applications: Options:
• Demoltion • DustProtector II
• Foundation work • Installation kit for
• Tunnelling underwater applications
• Trenching • Hydraulic compressor &
• Underwater work installation kit for tunnel
• Boulder size reduction in applications
quarries
See also Parts and
Features: Services Catalogue:
• VibroSilenced Plus • Warranty extension
system 1+2 program
• ContiLube™ II • Working tools
• Energy Recovery • Lubricants
• AutoControl (MB 1000 • Maintenance kits
upwards) • Connection hoses
• StartSelect™
(MB 1200 upwards)
• Percussion chamber
ventilation
Weights apply to standard carriers only. Any variances must be agreed with Atlas Copco
1)
114
rig-mounted
Full details of measurement are available in the Safety and Operating Instruction of the product.
It can be found on www.acprintshop.com
115
Heavy hydraulic breakers
2000-10000 kg
Applications: Options:
• Demoltion • DustProtector II
• Foundation work • Installation kit for
• Tunneling underwater applications
• Trenching • Hydraulic compressor &
• Underwater work installation kit for tunnel
• Boulder size reduction in applications
quarries
• Blast-free mining See also Parts and
Services Catalogue:
Features: • Warranty extension
• VibroSilenced Plus 1+2 program
system • Working tools
• ContiLube™ II • Lubricants
• Energy Recovery • Maintenance kits
• AutoControl • Connection hoses
• StartSelect™
• PowerAdapt
• Percussion chamber
ventilation
1)
Weights apply to standard carriers only. Any variances must be agreed with Atlas Copco
and/or the carrier manufacturer prior to attachment.
2)
Breaker and breaker box with standard adapter plus working tool.
116
rig-mounted
breakers
Full details of measurement are available in the Safety and Operating Instruction of the product.
Can be found on www.acprintshop.com
117
Hydraulic compactors
Applications:
• Trench and soil compaction
• Driving sheeting and pilings
• Extracting
Features:
• Plug and play – no special installation required
• Integrated input flow and pressure control to prevent
overload
• Flat top mounting base for versability
• Practically maintanance free thanks to PermanentLube,
the permanent bearing lubrication device
• Removeable base plate (from HC 920 upwards)
Option:
• Rotation kits (HC 308–HC 2041)
118
rig-mounted
compactors
119
Silent demolition tools
Hydraulic rotation
360° hydraulic drives for infinite rotation with overload
protection are fitted as standard and provide excellent
handling. The CC 250 is equipped with a mechanical
rotation unit.
120
121
rig-mounted
cutters
Scrap cutters
Applications:
• Cutting metal structures (girders, sheets,
cables, rods)
• Demolition work with mini-excavators or
demolition robots inside buildings and in con
taminated areas (chemical plants, atomic power
plants)
Features:
• High cutting force along entire blade length
• 360° hydraulic rotation
• Short opening and closing times
• Solid, extremely resistant components
• Replaceable blades
1)
Weights apply to standard carriers only. Any variances must be agreed with Atlas Copco
and/or the carrier manufacturer prior to attachment. Mounted on excavator stick.
2)
Mounted on excavator boom.
3)
With medium-sized adapter.
122
Combi cutters
240-920 kg
Applications:
• Light demolition work, e.g. narrow, lightly
reinforced concrete elements, masonry
• Particularly effective for stripping out and
reconstructing interiors
Features:
• Good performance-to-weight ratio
• 360° rotation
• Replaceable blades
1)
Weights apply to standard carriers only. Any variances U = With universal jaws
must be agreed with Atlas Copco and/or the carrier S = With steel cutting jaws
manufacturer prior to attachment.
2)
With medium-sized adapter
3)
With max oil flow
123
Combi cutters
1900-2550 kg
Applications:
• Cutting of masonry and reinforced concrete
• Reduction of steel and reinforcements
Features:
• Short opening and closing times
• 360° hydraulic rotation
• Tandem cylinders
• Replacable blades and teeth
• Exchangeable jaws
• Available with universal or steel cutting jaws
• CAPS Coupling And Positioning System
1)
Weights apply to standard carriers only. Any variances must be agreed with Atlas Copco
and/or the carrier manufacturer prior to attachment.
2)
With medium-sized adapter
3)
With max oil flow
124
CC 2500 U CC 2500 S
22-35 22-35
2840 2550
370 370
- 130
90 -
150-250 150-250
350 350
2,9 2,9
3,1 3,1
30 30
170 170
860 400
rig-mounted
725 460
cutters
350 380
3363 0937 51 3363 0932 01
125
Combi cutters
3480-6300 kg
Applications:
• Cutting of masonry and reinforced concrete
• Reduction of steel and reinforcements
Features:
• Short opening and closing times
• 360° hydraulic rotation
• Tandem cylinders
• Replacable blades and teeth
• Exchangeable jaws
• Available with universal or steel cutting jaws
• CAPS Coupling And Positioning System
1)
Weights apply to standard carriers only. Any variances must be agreed with Atlas Copco
and/or the carrier manufacturer prior to attachment.
2)
With medium-sized adapter
3)
With max oil flow
126
CC 4700 U CC 4700 S CC 6000 U CC 6000 S
45-65 45-65 58-85 58-85
4750 4500 6500 6300
620 620 830 830
- 198 - 205
155 - 180 -
350-450 350-450 450-550 450-550
350 350 350 350
3,2 3,2 4,0 4,0
3,7 3,7 4,0 4,0
50 50 50 50
170 170 170 170
rig-mounted
127
Demolition pulverizers
Applications:
• Primary demolition of reinforced concrete
structures
• Secondary reduction and separation
Features:
• 360° hydraulic rotation drive
• Short opening and closing times
• Replaceable blades, teeth and tooth plates
1)
Weights apply to standard carriers only. Any variances must be agreed with Atlas Copco
and/or the carrier manufacturer prior to attachment.
2)
With medium-sized adapter
3)
With max oil flow
128
Bulk pulverizers
Applications:
• Secondary reduction and s eparation
• Secondary demolition of r einforced
concrete structures
• Separation of concrete and rebar
Features:
• Wide jaw
• Short opening and closing times
• 360° hydraulic rotation drive*
1)
Weights apply to standard carriers only. Any variances must be agreed with Atlas Copco
and/or the carrier manufacturer prior to attachment.
2)
With medium-sized adapter
3)
With max oil flow
129
Multi grapples
Applications:
• Demolition (masonry, wooden
structures)
• Sorting and loading
Features:
• 360° hydraulic rotary drive
• Grapple and wear parts made of carbon steel
• High grapple capacity
• Replaceable blades
1)
Weights apply to standard carriers only. Any variances must be agreed with Atlas Copco
and/or the carrier manufacturer prior to attachment.
2)
With medium-sized adapter, without extra blades
130
MG 300 MG 400 MG 500 MG 800
2-5 4-8 5-9 9-16
290 450 460 825
2,0 2,3 2,4 3,8
20-40 35-40 35-50 70-100
300 300 300 350
5-10 10-15 10-15 20-25
120-150 120-150 120-150 150-210
100 150 200 400
1100 1400 1500 1700
500 600 700 800
3363 1036 52 3363 1036 53 3363 0982 20 3363 0982 21
131
Your choice for minimized
lifecycle cost
Increased productivity
Only genuine parts fit exactly to the stresses that an
Atlas Copco product causes on it´s components. And only
original parts enable the owner to minimize downtime
and to protect the investment. Only a working machine
can contribute to productivity of your company.
Let it work!
132
Parts and services
Following pages represent our basic
program of lubricants, accessories and
consumables.
133
Lubricants
134
Consumables for power trowels
Floating discs
BG370/ BG370/
Fits to trowel BG240 BG Combi BGCombi
BGCombi BGCombi
Diameter mm 610 865 945 945 1015
Comment 3 mm thick
Pcs/ pack 1 1 1 1 1
Part number 4700 0330 81 4700 0323 97 4700 0319 37 4700 0330 36 4700 0324 73
Floating blades
Fits to trowel BG370 BG470
Pcs/ pack 1 1
Part number 4700 0326 59 4700 0117 58
Trowel blades
BG370 / BG370 /
Fits to trowel BG240 BG470
BGCombi BGCombi
Blade arm type Bolt-on Quick-Release Bolt-on Bolt-on
Comment
Pcs/ pack 4 4 1 1
Part number 4700 0489 68 4700 0022 55 4700 0489 37 4700 0218 88
Pcs/ pack 1 1 2 2
Diameter mm 850 1020
parts and
services
Part number 3382 0105 70 3382 0105 71 3382 0105 72 3382 0105 73
135
Accessories for handheld
pneumatic equipment
Claw couplings
Hose inner Bore Weight Part number
diameter
mm mm kg
20 17,2 0,15 9000 0312 00
25 22 0,17 9000 0313 00
136
VAM water separators
Water Hose Part number
Air flow
separators connection European type1)
mm I/s
VAM 01 20 50 8092 0110 58
VAM 5A 25 120 8092 0110 82
Max. working pressure 8 bar
1)
US type also available. Please contact your Atlas Copco sales
representative for further information.
BLG/CLG lubricators
European type1)
inner diameter
Part number
Oil volume
Lubricators
Weight
Hose
flow
Air
mm l/s l kg
CLG 10, for
both mineral
25 8-15 1,3 3 8202 5101 23
and synthetic
oil
CLG 30, for
both mineral
25 15-140 1,3 3 8202 5102 39
and synthetic
oil
BLG 30, for
25 15-140 1,3 3 8202 5102 05
mineral oil
Max. working pressure 20 bar
1)
US type also available. Please contact your Atlas Copco sales
representative for further information.
parts and
services
137
Accessories for handheld
hydraulic equipment
Ø mm mm
90 870 3378 0050 45
150 870 3378 0050 46
200 870 3378 0050 44
250 870 3378 0050 47
280 870 3378 0050 49
350 870 3378 0050 48
Hydraulic
Coupling EHTMA class Part number
extension hose
138
Water kit for core drill and cut-off saw
Size Water Weight Part number
volume
mm l kg
220x620x250 10 8 3371 8090 02
1)
including water kit
Diamond discs
Concrete and asphalt diamond discs for
14 inch and 16 inch cut-off saw
139
Accessories for hydraulic
attachments
Chisel paste
For hydraulic breakers
Size Part number
12 x 400 g 3363 0949 13
12 x 500 g1) 3363 0912 00
15 kg 3362 2639 00
45 kg 3362 2632 75
1)
for use with ContiLube™ II
140
Atlas Copco 1+2 program:
Extended warranty for hydraulic
breakers
For hydraulic breakers, two years additional warranty are
provided free of charge. The prerequisite for a warranty
extension is that you register your breaker on the internet
within 4 weeks of initial start-up. The warranty period
begins on the date of purchase.
Features:
• Three years warranty period
• Unlimited operating hours
• Extension period covers the warranty risk
• Covers main components, including the piston
Benefits:
• Protected investment and peace of mind – free of
charge
• Time to focus on your business
• Improved breaker availability
• Higher resale value
Register at www.1plus2program.com
Basic warranty
12 months 24 months
“Standard Warranty” ”Standard scope of Warranty”
36 months
Maintenance according to the operating instructions,
at least one inspection per 12 months or not later than
after each 500 operating hours – whatever is earlier.
parts and
services
141
Metric/U.S. Conversion Table
To convert from Into Multiply by
acres sq meters 4,047
bar pounds/sq in 14,504
Celsius (°C) Fahrenheit (°C x 9/5) + 32
centimeters inches 0,3937
cubic centimeters cu inches 0,06102
cubic feet cu meters 0,02832
cubic feet liters 28,32
cubic ft/min cu meter/min 0,02831
cubic inches cu centimeters 16,3872
cubic meters cu feet 35,31
cubic meters cu yards 1,308
cubic yards cu meters 0,7646
cubic yards liters 764,6
feet meters 0,3048
feet millimeters 304,8
feet/min meters/min 0,3048
Fahrenheit (°F) Celsius (°F-32) x 5/9
gallons (U.S.) liters 3,785
gallons/min liters/sec 0,063
Hertz vibrations/min 60
horsepower, metric horsepower 0,9863
horsepower horsepower, metric 1,014
inches centimeters 2,54
inches millimeters 25,4
kilograms pounds 2,205
kilograms tons (long) 0,0011023
kilograms tons (short) 0,0009842
kilograms (force) Newtons 9,807
kilograms/cm pounds/in 5,60
kilograms/cu.m lb/cu ft 0,0624
kilograms/cu.m lb/cu yd 1,6856
kilograms/sq cm lb/sq in 14,22
kilograms/sq m lb/sq ft 0,02048
kilometers miles 0,6214
kilometers/hr miles/hr 0,6214
kilometers feet 3,209
kilopascals (kPa) pounds/sq in 0,145
kpm lb ft 7,233
liters cu ft 0,035
liters gal (U.S. liq) 0,264
liters qts (U.S. liq) 1,057
Megapascals (MPa) pounds/sq in 145,04
meters feet 3,281
meters inches 39,37
142
To convert from Into Multiply by
meters miles (statute) 0,0006214
meters yards 1,094
meters/min feet/min 3,281
miles (statute) kilometers 1,609
miles (statute) meters 1,609
miles/hr kms/hr 1,609
millimeters inches 0,03937
millimeters feet 0,0033
Newtons pounds (force) 0,225
Newtons kilograms (force) 0,102
Newton meters (Nm) pounds-inches 8,8507
Newton meters (Nm) pound-feet 0,7376
pints (liq) liters 0,473
pounds kilograms 0,4536
pound-feet KPM 0,1383
pound-feet Newton meters (Nm) 1,3556
pounds (force) Newtons 4,448
pound-inches Newton meters (Nm) 0,1130
pounds/in kilograms/cm 0,1786
pounds/cu yd kg/cu meter 0,55955
pounds/sq in bar 0,06895
pounds/sq in kg/sq cm 0,0703
pounds/sq in kilopascals (kPa) 6,895
pounds/sq in megapascals (MPa) 0,006895
quarts (liq) liters 0,9463
rod meters 5,029
sq centimeters sq inches 0,155
sq feet sq meters 0,0929
sq feet sq yards 0,1111
sq inches sq cms 6,452
sq kilometers sq miles 0,3861
sq meters sq feet 10,76
sq meters sq yards 1,196
sq miles sq kms 2,59
sq millimeters sq inches 0,00155
sq yds sq meters 0,8361
Temperature Celsius (°C) (°F-32) x 5/9
tons (long) tons (short) 1,016
tons (metric) kilograms 1,000
tons (metric) pounds 2,205
tons (short) kilograms 907,18
tons (short) tons (metric) 0,9078
vibrations/min Hertz 0,0167
yards meters 0,9144
143
Use only authorized parts. Any damage or malfunction
caused by the use of unauthorized parts is not covered by
Warranty or Product Liability
www.atlascopco.com