Академический Документы
Профессиональный Документы
Культура Документы
Training Files:
Download the training files using the button below, if you have not done so already.
Download
Procedure Setup:
1. To avoid naming conflicts, it is recommended you save your work, click File > Close until no models
display, then click File > Manage Session > Erase Not Displayed.
2. Click File > Manage Session > Set Working Directory and navigate to the PTCU\CreoParametric2
\Cabling\Schematics_Import folder and click OK
8. In the message window, notice the message that states the XML file has been read successfully.
Figure 1
10. In the menu manager, enable the Alphabetical check box and click Execute.
11. In the Information window, notice the XML wiring reference data for the wires, filled out from Creo
Schematics.
http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_bcc2716c-be0... 01-11-2017
Importing Creo Schematics Data into Creo Parametric Page 2 of 3
Figure 2
12. Notice the XML reference data for the cables, filled out from Creo Schematics.
Figure 3
13. Notice the XML reference data for the connectors, filled out from Creo Schematics.
Figure 4
14. Notice the XML reference data for the spools, filled out from Creo Schematics.
Figure 5
1. Click the Logical Data group drop-down menu and select Clear Reference.
◾ Click Yes in the Confirmation dialog box.
2. Click Import .
http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_bcc2716c-be0... 01-11-2017
Importing Creo Schematics Data into Creo Parametric Page 3 of 3
5. Enable HARNESS_2 and select Done Sel > Done from the menu manager.
6. Click Compare .
8. In the Information window, notice that only the items belonging to HARNESS_2 are imported.
Figure 6
http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_bcc2716c-be0... 01-11-2017