Академический Документы
Профессиональный Документы
Культура Документы
Signature:
Course/Section: ECE160L/E01 Student No: 2014111842
VLSM Seatwork 3:
Part 1. Based from the network diagram and information below, create an addressing scheme utilizing VLSM. Tabulate the
VLSM addressing scheme and the specific ip address table with their respective ports. Label the diagram below appropriately.
Part2. Using the Packet Tracer illustrate and label the detailed network topology diagram for the following networks based from
the following network information given using the Packet tracer. Represent each network by a switch and a desktop PC.
Establish connectivity using static routing with exit interface in the specified problems.
1. The Malayan College plans to expand its network in a local district. Router A will have a network with three computer labs
with 30 hosts each. On router A, there will also be a network with 58 classrooms having 3 hosts each. Router B contains the
office staff and administrators that will need 28 hosts, the guidance and disciplinary office that will have 10 hosts and the faculty
that will require 24 terminals. Router A and B will be connected via serial WAN link. Setup the remaining addressing into two
sub-subnets for future expansion. The school has been given the address 192.145.75.0/21. Use Static route/exit interface to
Router A and use Default route/next-hop address to Router B.
IP Addressing Table
Device Interface IP Address Subnet Mask Default Gateway
IP Addressing Table
IP Addressing Table