Академический Документы
Профессиональный Документы
Культура Документы
OSPF
----
R2#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#router ospf 1
R2(config-router)#router-id 1.1.1.1
VLAN
----
CONFIGURAR ROUTERS
route>ena
route#configure terminal (conft)
Router(config)#interface fastethernet 0/0 (depende deL PUERTO)
Router(config-if)#no shut (levanta el puerto)
Router(config-if)#ip addres (colocar ip)
(router conf t )
ip dhcp pool (nombre)
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
dns-server 8.8.8.8
excluir ips
ip dhcp excluded-address (10.1.1.1 10.1.1.20)
CONFIGURAR SWITCH
Switch>ena
Switch#config t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 5
Switch(config-vlan)#name alumnos (asignar nombre)
Switch(config-vlan)#exit
Switch(config)#interface range fastEthernet 0/1-2 (el rango de los puertos a
asignar a la vlan)
Switch(config-if-range)#switchport access vlan 5 (le assignamos la van creada
anteriormente)
Switch(config-if-range)#exit
Switch(config)#exit
Switch#copy run start (para guardar la configuacion)
Router(config)#config-register 0X2102