Академический Документы
Профессиональный Документы
Культура Документы
Type Pointek CLS 100 Pointek CLS 200 Pointek CLS 300
Probe
Process connection NPT / BSPT NPT / BSPT / JIS / San. NPT / BSPT / JIS
Connection size 3/4 – 1 inch 3/4 – 1 – 1- 1/4 – 1-1/2 inch 3/4 – 1 – 1-1/4 – 1-1/2 inch
Wetted parts AISI 316L / PVDF AISI 316L / PPS / PVDF*** AISI 316L / PFA / Ceramics*
Min. probe length (mm/inch)
- rod version 100/4 100/4 350/14
- rope/cable version — 350/14 500/20
Max. probe length (mm/inch)
- rod 100/4 5500/216 1000/40
- rope — 35000/1378 25000/985
Max. tensile force (kg/lbs) — 180/296 1900/4188
Pressure range (bar/PSI)** FV-10/146 FV- 25/365 (10/146) FV-35/511
- High pressure version (optional) — — FV-100/1460
Temperature range °C (°F)
- Standard-version -40/100 (-40/212) -40/125 (-40/257) -40/200 (-40/392)
- HT- version — — -40/400 (-40/752)
Min. dielectric constant (εr) 1.5 1.5 1.5
Measurement frequency 5.5 mHz max. 5.0 mHz max. 600 kHz max.
Switch point repeatability 2 mm / 0.08” 2 mm / 0.08” product dependent
Hysteresis 2 mm / 0.08” 2 mm / 0.08” product dependent
Electrostatic Discharge Protection according to CE according to CE according to CE, additional 55 kV on the probe
Enclosure version ABS impact proof Aluminum Aluminum
Epoxy coated — yes yes
NEMA / Type / IP-rating 4 / 4X / IP65 4 / 4X / IP65 4 / 4X / IP65
Cable inlet 1 pc. 1/2“ NPT 2 pcs. 1/2“ NPT 2 pcs. 1/2“ NPT
Cable version (22 AWG) 4-conductor cable — —
Polyester Cable length 1.0 m / 3.3 ft — —
Power supply
Universal — 12 – 250 Vac/dc 12 – 250 Vac/dc
24 Vdc 10-30 Vdc — —
Max. Power consumption 0.6VA / 0.6 Watt 2VA / 2 Watt 2VA / 2 Watt
Wiring connections max. 2.5 mm2 max. 2.5 mm2 max. 2.5 mm2
Temperature range °C (°F)
- operation -40/85 (-40/185) -40/85 (-40/185) -40/85 (-40/185)
- storage -40/85 (-40/185) -40/85 (-40/185) -40/85 (-40/185)
Signal detection
Failsafe Operation high or low high or low high or low
Signal indicators (LEDs)
- power green green green
- probe adjustment yellow yellow yellow
- output states red red red
Adjustments
- time delay on/off selectable — 1 – 60 sec. 1 – 60 sec.
- sensitivity yes yes yes
Output{s}
Relay
- contact selectable NC/NO — SPST SPST
- selectable fail safe
(energized/de-energized) — yes yes
- max. contact load — 5A / 30Vdc 5A / 30Vdc
- max. contact load Cos phi =1 — 8A / 250Vac 8A / 250Vac
- max. switch capacity — 2000VA / 150 Watt 2000VA / 150 Watt
- min. contact load — 10mA / 5Vdc 10mA / 5Vdc
Solid State (NPN / PNP trans.)
- galvanically isolated output yes yes yes
- polarity sensitive no no no
- max. load 2 VA 2 VA 2 VA
- max. switch voltage 28/40 Vac/dc 250 Vac/dc 250 Vac/dc
- max. load current 100 mA 100 mA 100 mA
Current (Alarm) output
- 4/20 or 20/4 mA (2-wire) yes — —
Approvals
- Standard CE, EN 61326 CE, EN 61326 CE, EN 61326
- Cenelec / ATEX / FM / CSA IS & DIP XP & DIP XP & DIP
- Overspill protection WHG (Germany) WHG (Germany) WHG (Germany)
- Marine (ENV 1, 2 & 5) Lloyd’s Register Lloyd’s Register Lloyd’s Register
* Ceramics is applicable for the Pointek CLS 300 high temperature version
** Pressure rating is temperature dependent, contact Siemens Milltronics for the rating curves ***Optional material
For detailed drawings, wiring diagrams and further specifications on the Pointek CLS series, please consult our web site. Specifications subject to change without notice.
Teflon is a registered trademark of E.I Du Pont de Nemours and Company. Kynar is a registered trademark of Atofina Chemicals, Inc. Ryton is a registered trademark of Phillips Petroleum Company.
www.siemens-milltronics.com
7ML1996-5AT03 Printed in Canada
Reliability Beyond Measure
Pointek® Capacitance Point Level Sensors
Accurate and Reliable
Point Level Detection
Pointek CLS sensors provide accurate and
reliable level detection even in the most
challenging applications or environments.
They are field-proven performers in major
industries worldwide:
■ Chemical ■ Water and Wastewater
■ Petrochemical ■ Milling, Grain
■ Aggregate ■ Food Processing
■ Cement ■ Power Generation
Pointek CLS 200: For high and low level alarms in most
applications
Typical Applications
Solids: Granulates, Flour, Corn, Grain, Clinker, Gravel,
Coal, Fly-Ash, Sand, Plastic Pellets, Cement
✔ Quality construction, with all electronic circuits fully potted in epoxy resin for
protection against shock, vibration, humidity and condensation
▲
Impact resistant ABS
enclosure with a rigid
and constricted spaces. conduit entry
■ Intrinsically Safe
■ Dust Ignition Proof ▲ Pointek CLS 100 is available in two NEMA 4X/IP65
■ General Purpose approved enclosure types to meet specific industrial
wiring practices.
▲ ▲
Pointek CLS 100 instruments provide high The Pointek CLS 100 does not need to penetrate this
and low level detection in a 30 cm (11.8”) plastic vessel for reliable point level detection in this
diameter fully automatic epoxy resin turbulent liquid process.
potting system.