Академический Документы
Профессиональный Документы
Культура Документы
JEMISH S. MODI
Mechanical Design Engineer
BE Mechanical + PGDP (Piping Engineering) + MBA (Project Management)
Total Experience – 9 Years
Contact No.: - (M):+91-9998162077, +91-7043349370
Email ID: modi_jemish@yahoo.com, jsmodi89@gmail.com
Career Objective
To look for new challenges and work towards achieving them with the highest level of efficiency. To
secure a challenging assignment that would provide a significant coverage for progressive learning,
growth and opportunities to achieve in depth practical experience in industry.
Rock solid positive attitude with comprehensive problem solving approach. In addition to that excellent
verbal and written communication skills. Willing new to learn and face new challenges and strong
believer of team work.
Professional Summary
Experience summary:
Current Employer Reliance Industries Ltd. – Static Design Engineer February – 2015 to Till date
Job Responsibility:
Developing the design calculation of mechanical Static Equipments based on the inputs from
client like GA drawings and basic process datasheet.
Selection of MOC, material thickness & stress analysis using ASME & TEMA codes.
To prepare Datasheet & Material Requisitions (MRs) for Quotation and for Purchase
Attending vendor / client meetings to sought out the problems
Perform design calculation and model using Pv-elite, Code Cal software. And thickness
calculation of pressure parts using ASME, TEMA, IS codes, WRC107, WRC 297, calculation.
Providing input data for draftsman for drafting using AutoCAD.
To review the technical offers from bidders, and to prepare technical queries
To prepare Technical Bid Evaluation (TBE) reports
To review vendors calculations and drawings (for Various Static Equipments)
To interact with other departments and project/client, for Inter-Departmental Checking
comments, on MDS and Tech Specs, TBEs, and Vendor documents
To review bidders offers, to identify lacunae, and to prepare Technical Queries (TQs) as part of
carrying out Technical Bid Evaluation (TBE);
Checking of the design calculation of heat exchangers pressure vessels etc. with reference to the
national and international codes like ASME, TEMA, IS codes, etc.
To witness performance tests of the equipment, at vendors works, before final clearance
To comply with QMS procedures and to maintain appropriate records
Preparation of fabrication / Site Modification drawings as per client Requirement using AutoCAD.
Current Employer ITT Corporation India Pvt. Ltd. – Design Engineer-IP March-2012 to
Feburary-2015
Job Responsibility:
Job Responsibility:
To optimize the vessel in such a manner to Provide higher pay load without violation of
international as well as domestic rules and regulations.
Fabrication Drawing Preparation guidance to Draughtsman & Drawing verification.
Responsible for Detailed Engineering- Covering G.A. drawings, P&Id, pfd, Equipment
specifications, inputs.
Knowledge of different quality standards, fabrication processes & sequences, which helps in
preparing drawing efficiently.
Designing & Development of lighter structural component in place of existing over designed
components by using CAD/CAE technology 3D – CAD model is prepared on PRO-E.
Getting approval of Vertical Tanks, Transport tanks, Semi-trailers & liquid cylinders from various
agencies like TUV, BVIS, LLYODS and CCOE.
In co-ordination with Product Management Team, I am also involved in constant improvement of
product to beat global as well as domestic competitors without compromising Quality.
ASME SEC. VIII DIV. 1, EN13458, EN13530, EN13648, DOT4L, CGA341, SMPV Rules, API 610,
API 682, ASME B73.1, ASME B16.5, ASME B31.3, ASME B31.1, OISD 118, OISD 144 etc
PV-Elite 2018, CodeCal 2018, Ansys, Codeware Compress 6261, Bentley Autopipe, AutoCAD,
Nozzle Pro, Autodesk Inventor, CAESAR_II, AVEVA PDMS, Cre-o 2.0, Pro-Mechanica, etc.
Achievements
Visited United States of America on H3 Visa for 10 Weeks to attend SFO Pump School & to
work on Project jobs
Got Award For “DESIGN AUTOMATION-2013” From ITC-ITT India
PRODUCTION LEVEL-1, Q.A. /Q.C. LEVEL-1 & ASSEMBLY LEVEL-1 certification course at Inox
CVA (Training course regarding fabrication, welding process and defects, NDT test, piping
System and Vacuuming System etc.)
Seminar delivered on “Valves and Gauges used in Cryogenic Industry”
EDUCATIONAL PROFILE:
Discipline/
School/College Board/University Year %
Specialization
Sikkim Manipal
MBA
University Sikkim Manipal 2014-2016 68.3
(Project Management)
(Distance Learning)
References
Declarations
I hereby declare that all the information provided by me in this application is correct and factual to
the best of my knowledge and belief. Hopefully I have explained myself in convenient manner.