Академический Документы
Профессиональный Документы
Культура Документы
Statements
The Company does not assume responsibilities for the following actions:
Power Outlet
· Damages caused by use and maintenance without complying with the
Power button Camera conditions specified in this guide;
Short press: wake up the screen, lock the screen. Supports 1D/2D code quick scanning. · The Company will not assume any responsibilities for the damages or
Long press: long press for 2-3 seconds in power off mode to switch on
problemscaused by optional items or consumables (rather than the initial
the device. Extended interface
Long press for 2-3 seconds in normal operation mode to To connect to base.(Need to buy base separately) Instructions for recharging and battery products or approvedproducts of the Company). The customer is not
select power off or reboot. This device supports charging only by USB cable entitled to change or modify the product without our consent.
Long press for 11 seconds when system is frozenfor automatic · Connect the 5V adapter to the power supply socket; · The product’s operating system supports official systemupdates, but if
reboot. · Connect the USB cable to the USB interface of the device for recharging;
· The screen will display the recharging icon during the recharging you change the operating system into a third party ROM system or alter
Volume button process; the system files by system cracking, it may cause system instability and
Volume adjustment (with app support, the button can be set as quick code · If the recharging icon does not appear, please check whether the USB security risks and threats.
scan button). interface is well connected.
Interfaces Configuration interfaces Type-c, SIM, PSAM, Battery safety 5.8G SRD receiver category:1
support of OTG
Charge battery only at ambient temperatures ranging from 40°C.
Printer type Thermal Printer
(1) CAUTION: Danger of explosion if battery is incorrectly replaced. This product can be used across EU member states.
Printing paper Width 58mm, maximum diameter 40mm The full text of the EU declaration DOC is available at the following
specifications Replace only with the same or equivalent type of battery recommended
internet address:www.sunmi.com
Battery 7.6V/2580mAh by the manufacturer. Dispose of used batteries according to battery
Manufacture
Outline L 214mm × W 83mm × H 49mm
manufacturer’s instructions. Technical features and characteristic Room 505 No.388 Song Hu Road Shanghai, China
dimensions
(2) CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN Operation Frequency Transmitted
OUTPUT:DC5V/2A INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO
Adapter 2412MHz-2472MHz 17.3dBm E.I.R.P
INPUT:AC100~240V/0.3A 50/60Hz WIFI
THE INSTRUCTIONS. 5150MHz-5250MHz 11.9dBm E.I.R.P
TPA-05A050200BU01 (3) CAUTION:Battery charging temperature upper limit is 40°C.
Adapter Model SRD 5745MHz-5850MHz 10.3dBm E.I.R.P
TPA-46050200VU
BT 2402MHz-2480MHz 7.8dBm E.I.R.P
Adapter safety User Guide
When charging, please place the device in an environment that has a
normal room temperature and good ventilation. It is recommended to T5920
charge the device in an environment with a temperature that ranges from
0°C~40°C.
For altitude 2km below use only
Wi-Fi Safety
Turn Wi-Fi off in areas where Wi-Fi use is prohibited or when it may
cause interference or danger, such as in airplanes while flying.