Академический Документы
Профессиональный Документы
Культура Документы
Question Bank
SIGNAL PROCESSING
Semester IV
Assessment:
Internal Assessment consists of two tests out of which; one should be compulsory class test
(On minimum 02 Modules) and the other is either a class test or assignment on live problems
Or course project.
Books Recommended:
Text Books:
1. Salivahan S., “Digital Signal Processing”, TMH Publication,2001.
2. Oppenhein& Schafer, “Discrete Time Signal Processing”, PHI Publication 1989.
3. Haykin S and Van Veen B., “Signal & Systems”, Wiley Publication, 2nd Ed.
4. Linder D.K., “Introduction to Signal & Systems”, McGraw Hill International,1999.
Reference Books:
1. Proakis&Manolakis, “Digital Signal Processing” , PHI Publication, 1995
2. Lathi B.P., “Signal & Systems”, Oxford University press, 2nd Ed. 1998
3. Mitra S.K., “Digital Signal Processing”, TMH Publication, 2001.
4. Oppenhein& Schafer, “Discrete Time Signal Processing”, PHI Publication 1989.
5. Luis F Chaparro, “Signals and Systems using MATLAB”, Elsevier Publisher,
Academic Press
6. Li Tan, “ Digital Signal Processing, Fundamentals and Applications”, Elsevier
MODULE 1
Contents Hrs
1 10M
Questions Marks
2. State Sampling Theorem and explain how aliasing error occurs. (May14) 5M
xi(n) = {1,2, 3, 4 )
x2(n) = { 5, 6, 7, S }
Calculate Yc(n) = x1(n) * x2(n) (Dec 13)
7. 5M
Given the two sequence of length 4 Are —
x (n) = {0, 1, 2, 3)
h (n) = {2, 1, 1, 2)
8.
A continuous time signal.
10M
Find the following version of the signal (i) x (t 2) (ii) x(—t) (iii) x(—t + 2)
10.
A continuous time signal x(t) given below. (Dec 2014)
Sketch
(i) X1(t)=-2 x(t)
( i i ) X 2 (t)= x(t-3)- 2x(t)
(iii)
11. Sketch the signal x(t) = 2u(t) + tu(t)- (t 1)u(t 1) 3u(t 2) (May 2015)
— — — —
12.
State and prove Parseval's theorem for non-periodic signals.(May 2015)
13.
Classify the following systems as linear, non-linear,
time-variant, time invariant, causal, non-causal, static;
dynamic, stable and unstable. [10]
a) y (n) = n x(n)
b) y(t) = x(t2) (May 2015)
14.
A continuous time signal x(t) is given below: (May 2015)
MODULE 2
Contents Hrs
2 20M
Questions Marks
2. Write short notes on the following: Power Spectral Density (May 2014) 10M
MODULE 3
Contents Hrs
Contents Marks
Unit
3. 10M
Questions Marks
1. Find the z-transform and ROC of the following infinite duration 05M
signal
x(n) = a n U(n 1/2)+ b n u(- n -1) (May 2014)
X(z)= z3
(z+1)(z-1)2
10M
x(z)=
z +4z+3
8. Plot Pole-zero diagram for - (May 2013) 10M
h(n)=(0.5)n ;
0<n<7
10M
9. Find the following signal are power or energy signal.
(i) x(t)=e-2tu(t)
15.
16.
17.
18. 1)IZI>1
2)IZI<1/3
3)I/3<IZI<1
MODULE 4
Contents Hrs
4. 15M
Questions Marks
2. Find the initial value and final value of (May 2015) 10M
ROC:IZI>1
2y (n) +3y (n-1) + y (n-2) =u (n) +u (n-1)-u (n -2). Find the response of
the system when initial conditions are given y (-1) = 2, y (-2) = -1 and
unit step is applied at the input. (May 2015)
4. Show pole Zero diagram of the given transfer function (May 2015) 10M
h (n)= (0.5)n; 0 <n <7
9. What is feedback amplifier? Name different types and explain any one of them 10M
11.
Consider the following linear constant co-efficient difference
equation
MODULE 5
Contents Hrs
5. 8M
Questions Marks
1. 10M
Obtain the magnitude and phase response of the following system by
analytical and geometrical method h(n)={1,1/2}
2. Obtain the magnitude and phase response of the following system by 10M
3. Obtain the magnitude and phase response of the following system by 10M
analytical and geometrical method h(n)={1,1/2}
MODULE 6
Contents Hrs
6. Oscillators 10M
Questions Marks
2. Find the DFT of x(n) = {1, 2, 3, 4) using DIT-FFT. (Dec 2014) 10M