Академический Документы
Профессиональный Документы
Культура Документы
TITLE:
A/C Reg.:
32-42-27-210-006-A - Inspection/Check
RP-C3269
of the Brake with the Wheel Removed
CARD: ZONE: INTERVAL:
SKILL: ACCESS:
MECH. INSP.
** ON A/C ALL
TASK 32-42-27-210-006-A
Inspection/Check of the Brake with the Wheel Removed
WARNING: LET THE BRAKES AND THE WHEELS BECOME COOL BEFORE YOU GO
NEAR THE LANDING GEAR. DO NOT APPLY A LIQUID OR GAS DIRECTLY
ON A HOT WHEEL OR BRAKE UNIT. THIS CAN CAUSE A TIRE EXPLOSION
AND/OR A WHEEL RIM BURST.
REFERENCE DESIGNATION
(Ref. 32-41-11-000-006-A). Removal of the MLG Wheel
(Ref. 32-41-11-400-006-A). Installation of the MLG Wheel
(Ref. 32-42-27-000-001-A). Removal of the Brake
(Ref. 32-42-27-400-001-A). Installation of the Brake
(Ref. 32-42-71-000-001-A). Removal of the MLG Axle Adaptor-Sleeves
(Ref. 32-42-71-400-001-A). Installation of the MLG Axle Adaptor-Sleeves
Brake Disk Failure Reporting
JCP Title: temporary job card package CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 1 of 5
JCP Ref: reference DATABASE REV DATE: Feb 01/2019
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN COMPLETED TO THE REQUIRED PRINT DATE: Mar 17/2019 04:10
STANDARD AND SUPPORTS THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF RELEASE
TO SERVICE
JOB CARD MPD-TASK:
CEB - A318/A319/A320/A321 AMM TASK : 32-42-27-210-006-A
32-42-27 PB 601
TITLE:
A/C Reg.:
32-42-27-210-006-A - Inspection/Check
RP-C3269
of the Brake with the Wheel Removed
MECH. INSP.
IN ORDER TO HELP THE INVESTIGATIONS THANK YOU TO PROVIDE AIRBUS WITH THE FOLLOWING INFORMATION
PLEASE KEEP ALL THE DAMAGED PARTS (ENTIRE BRAKE, DEBRIS, ETC.)
IN QUARANTINE UNTIL FURTHER NOTICE FROM AIRBUS
IDENTIFICATION
RESIDUAL BRAKING BRAKE TEMP. SCATTER OTHER REASON: .......................
BRAKE INFORMATION
PN SN POSITION ON AIRCRAFT
DAMAGE DESCRIPTION
(PLEASE ATTACH PICTURES)
PLEASE CIRCLE THE CORRECT ANSWER (INCLUDING CONSEQUENCES) - SEVERAL ANSWERS ARE ALLOWED
N_MM_324227_6_MHC0_01_02
JCP Title: temporary job card package CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 2 of 5
JCP Ref: reference DATABASE REV DATE: Feb 01/2019
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN COMPLETED TO THE REQUIRED PRINT DATE: Mar 17/2019 04:10
STANDARD AND SUPPORTS THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF RELEASE
TO SERVICE
JOB CARD MPD-TASK:
CEB - A318/A319/A320/A321 AMM TASK : 32-42-27-210-006-A
32-42-27 PB 601
TITLE:
A/C Reg.:
32-42-27-210-006-A - Inspection/Check
RP-C3269
of the Brake with the Wheel Removed
MECH. INSP.
ADDITIONAL INFORMATION
(REQUESTED TO BETTER UNDERSTAND THE SCENARIO THAT LED TO THE CARBON BRAKE DISKS RUPTURE)
PILOT/MAINTENANCE REPORT (OR LOG BOOK ENTRY) WHICH SHOULD INCLUDE THE IMPACT ON THE BRAKING
BEHAVIOR (NONE, JERKS, LOSS OF BRAKING EFFICIENCY, ETC.)
INFORMATION ON ANY ABNORMAL BRAKE TEMPERATURE INDICATION(E.G. E/W ''BRAKES HOT'', BRAKE
TEMPERATURE HIGHER ON ONE BRAKE THAN THE OTHERS, ETC.), PREVIOUS LANDINGS INCLUDED
POST FLIGHT REPORT OF THE EVENT AND ASSOCIATED TROUBLESHOOTING DATA (TSD) , IF ANY
DETAILS ON ANY ADDITIONAL INFORMATION JUDGED RELEVANT FOR THE UNDERSTANDING OF THE EVENT
(E.G. TIRE DEFLATION, FUSE PLUG RELEASE, ETC.):
PN PN
CSI CSI
N_MM_324227_6_MHC0_02_02
JCP Title: temporary job card package CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 3 of 5
JCP Ref: reference DATABASE REV DATE: Feb 01/2019
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN COMPLETED TO THE REQUIRED PRINT DATE: Mar 17/2019 04:10
STANDARD AND SUPPORTS THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF RELEASE
TO SERVICE
JOB CARD MPD-TASK:
CEB - A318/A319/A320/A321 AMM TASK : 32-42-27-210-006-A
32-42-27 PB 601
TITLE:
A/C Reg.:
32-42-27-210-006-A - Inspection/Check
RP-C3269
of the Brake with the Wheel Removed
MECH. INSP.
3. Job Set-up
Subtask 32-42-27-941-064-A
A. Safety Precautions
(1) Make sure that the wheel-chocks are in position.
(2) Set the parking brake to the OFF position.
Subtask 32-42-27-860-063-A
B. Aircraft Maintenance Configuration
(1) If it is not already done, remove the wheel of the brake that you must examine
(Ref. AMM TASK 32-41-11-000-006) .
4. Procedure
** ON A/C ALL
** ON A/C ALL
(Ref. Fig. Brake Disk Failure Reporting)
** ON A/C ALL
NOTE: If there is no brake damage, it is not necessary to record the data in the brake-
disk failure reporting-sheet.
(1) When you do a visual inspection of the brake, if you find brake damage:
· Record the data in the brake-disk failure reporting-sheet to help Airbus
continuous monitoring.
(2) Make sure that there are no leaks of hydraulic fluid on the pistons, the hydraulic
lines and the self-sealing couplings.
(3) Examine the wear indicators. If the end of one of the two wear indicators is
flush with the machined surface of the piston housing (heat pack fully worn),
replace the brake before the next flight (Ref. AMM TASK 32-42-27-000-001) and
(Ref. AMM TASK 32-42-27-400-001) .
(4) Make sure that the heat pack is in the correct condition and that there is no
hydraulic fluid contamination on the carbon parts.
(a) Make sure that the disks can move easily on the torque tube.
(b) Examine the carbon disks and make sure that:
· There is no structural damage on the outer edge.
· There are no cracks.
JCP Title: temporary job card package CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 4 of 5
JCP Ref: reference DATABASE REV DATE: Feb 01/2019
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN COMPLETED TO THE REQUIRED PRINT DATE: Mar 17/2019 04:10
STANDARD AND SUPPORTS THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF RELEASE
TO SERVICE
JOB CARD MPD-TASK:
CEB - A318/A319/A320/A321 AMM TASK : 32-42-27-210-006-A
32-42-27 PB 601
TITLE:
A/C Reg.:
32-42-27-210-006-A - Inspection/Check
RP-C3269
of the Brake with the Wheel Removed
MECH. INSP.
(e) Make sure that there are no cracks or signs of overheat on the visible part of
the torque tube.
(f) Make sure that the probe of the temperature sensor does not move freely.
(g) Make sure that the surface finish of the hydraulic crown is in the correct
condition.
(h) Make sure that the play of the brake release is correct.
(i) Make sure that none of the pistons moves.
(j) If the inspection shows damage that can prevent the normal operation of the
brake unit:
· Replace the brake unit (Ref. AMM TASK 32-42-27-000-001)
(Ref. AMM TASK 32-42-27-400-001) .
· Remove the protection devices from the axle and do an inspection of the
axle (Ref. AMM TASK 32-42-71-000-001) (Ref. AMM TASK 32-42-71-
400-001) .
(5) With the parking brake not applied, shake the piston housing manually to find if the
brake piston-housing bolts are correctly tightened.
(a) If the piston housing is loose, replace the brake (Ref. AMM TASK 32-42-27-
000-001) (Ref. AMM TASK 32-42-27-400-001) .
** ON A/C ALL
5. Close-up
Subtask 32-42-27-860-064-A
A. Put the aircraft back to its initial configuration.
(1) Install the wheel (Ref. AMM TASK 32-41-11-400-006) .
(2) Make sure that the work area is clean and clear of tools and other items.
*** END OF CARD ***
JCP Title: temporary job card package CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 5 of 5
JCP Ref: reference DATABASE REV DATE: Feb 01/2019
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN COMPLETED TO THE REQUIRED PRINT DATE: Mar 17/2019 04:10
STANDARD AND SUPPORTS THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF RELEASE
TO SERVICE