Академический Документы
Профессиональный Документы
Культура Документы
1. Product profile
1.3 Applications
Industrial, scientific and medical applications
Broadcast transmitter applications
BLF184XR; BLF184XRS
Power LDMOS transistor
2. Pinning information
Table 2. Pinning
Pin Description Simplified outline Graphic symbol
BLF184XR (SOT1214A)
1 drain1
1 2 1
2 drain2
3 gate1 5
3 4 3
4 gate2 5
4
5 source [1]
2
sym117
BLF184XRS (SOT1214B)
1 drain1
1 2 1
2 drain2
3 gate1
3 4 5 3
4 gate2 5
4
5 source [1]
2
sym117
3. Ordering information
Table 3. Ordering information
Type number Package
Name Description Version
BLF184XR - flanged ceramic package; 2 mounting holes; 4 leads SOT1214A
BLF184XRS - earless flanged ceramic package; 4 leads SOT1214B
4. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VDS drain-source voltage - 135 V
VGS gate-source voltage 6 +11 V
Tstg storage temperature 65 +150 C
Tj junction temperature [1] - 225 C
[1] Continuous use at maximum temperature will affect the reliability, for details refer to the on-line MTF
calculator.
BLF184XR_BLF184XRS#4 All information provided in this document is subject to legal disclaimers. © Ampleon B.V. 2015. All rights reserved.
5. Thermal characteristics
Table 5. Thermal characteristics
Symbol Parameter Conditions Typ Unit
Rth(j-c) thermal resistance from junction to case Tj = 150 C [1][2] 0.18 K/W
Zth(j-c) transient thermal impedance from junction Tj = 150 C; tp = 100 s; [3] 0.065 K/W
to case = 20 %
aaa-011222
0.2
Zth(j-c)
(K/W)
0.16 (7)
(6)
(5)
(4)
0.12 (3)
(2)
(1)
0.08
0.04
0
10-7 10-6 10-5 10-4 10-3 10-2 10-1 1
tp (s)
(1) = 1 %
(2) = 2 %
(3) = 5 %
(4) = 10 %
(5) = 20 %
(6) = 50 %
(7) = 100 % (DC)
Fig 1. Transient thermal impedance from junction to case as a function of pulse
duration
6. Characteristics
Table 6. DC characteristics
Tj = 25 C; per section unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
V(BR)DSS drain-source breakdown VGS = 0 V; ID = 2.75 mA 135 - - V
voltage
VGS(th) gate-source threshold voltage VDS = 10 V; ID = 275 mA 1.25 1.9 2.25 V
VGSq gate-source quiescent voltage VDS = 50 V; ID = 50 mA - 1.6 - V
BLF184XR_BLF184XRS#4 All information provided in this document is subject to legal disclaimers. © Ampleon B.V. 2015. All rights reserved.
Table 7. AC characteristics
Tj = 25 C; per section unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Crs feedback capacitance VGS = 0 V; VDS = 50 V; f = 1 MHz - 3.1 - pF
Ciss input capacitance VGS = 0 V; VDS = 50 V; f = 1 MHz - 292 - pF
Coss output capacitance VGS = 0 V; VDS = 50 V; f = 1 MHz - 107 - pF
Table 8. RF characteristics
Test signal: pulsed RF; tp = 100 s; = 20 %; f = 108 MHz; RF performance at VDS = 50 V;
IDq = 100 mA; Tcase = 25 C; unless otherwise specified; in a class-AB production test circuit.
Symbol Parameter Conditions Min Typ Max Unit
Gp power gain PL = 700 W 22.8 23.9 - dB
RLin input return loss PL = 700 W - 20 13 dB
D drain efficiency PL = 700 W 71 73.5 - %
aaa-011223
600
Coss
(pF)
450
300
150
0
0 10 20 30 40 50
VDS (V)
VGS = 0 V; f = 1 MHz.
Fig 2. Output capacitance as a function of drain-source voltage; typical values per
section
BLF184XR_BLF184XRS#4 All information provided in this document is subject to legal disclaimers. © Ampleon B.V. 2015. All rights reserved.
7. Test information
drain 1
gate 1
Zi ZL
gate 2
drain 2
001aan207
BLF184XR_BLF184XRS#4 All information provided in this document is subject to legal disclaimers. © Ampleon B.V. 2015. All rights reserved.
aaa-009890
5
EAS
(J)
0
10 12.5 15 17.5 20 22.5 25 27.5 30
IAS (A)
95 mm 95 mm
C13 - T2
C7 +
C9 L5 C11
C15
R1 C25
C4 C5
C1 L1 L3 C17 C18 C23 L7 C26
80 mm C6 C20 C21 C22
C2 L2 L4 C19 L8 C27
C3 C24
R2
C16
C10 L6 C12
C8 +
T1 C14 -
38 mm
41 mm aaa-011399
Printed-Circuit Board (PCB): Taconic RF-35; r = 3.5 F/m; thickness = 0.765 mm;
thickness copper plating = 35 m, gold plated.
See Table 11 for a list of components.
Fig 5. Component layout for class-AB production test circuit
BLF184XR_BLF184XRS#4 All information provided in this document is subject to legal disclaimers. © Ampleon B.V. 2015. All rights reserved.
C9, C10, C13, C14 multilayer ceramic chip capacitor 4.7 F, 100 V TDK
C5750X7R2A475KT
C11, C12 electrolytic capacitor 1000 F, 63 V
C17, C19 multilayer ceramic chip capacitor 39 pF [1]
BLF184XR_BLF184XRS#4 All information provided in this document is subject to legal disclaimers. © Ampleon B.V. 2015. All rights reserved.
aaa-011224 aaa-011225
28 80 63
Gp ηD
ηD
(dB) (%)
PL
(dBm)
Ideal PL (2)
26 60
(1)
59
PL
24 40
55
22 20
Gp
20 0 51
0 200 400 600 800 1000 25 27 29 31 33 35 37 39
PL (W) Pi (dBm)
VDS = 50 V; IDq = 100 mA; f = 108 MHz; tp = 100 s; VDS = 50 V; IDq = 100 mA; f = 108 MHz; tp = 100 s;
= 20 %. = 20 %.
(1) PL(1dB) = 58.6 dBm (720 W)
(2) PL(3dB) = 59 dBm (800 W)
Fig 6. Power gain and drain efficiency as function of Fig 7. Output power as a function of input power;
output power; typical values typical values
BLF184XR_BLF184XRS#4 All information provided in this document is subject to legal disclaimers. © Ampleon B.V. 2015. All rights reserved.
aaa-011226 aaa-011227
28 80
Gp ηD
(dB) (%)
26
60
24 (4) (4)
(3) (3)
(2) 40 (2)
(1) (1)
22
20
20
18 0
0 200 400 600 800 1000 0 200 400 600 800 1000
PL (W) PL (W)
VDS = 50 V; f = 108 MHz; tp = 100 s; = 20 %. VDS = 50 V; f = 108 MHz; tp = 100 s; = 20 %.
(1) IDq = 50 mA (1) IDq = 50 mA
(2) IDq = 100 mA (2) IDq = 100 mA
(3) IDq = 200 mA (3) IDq = 200 mA
(4) IDq = 400 mA (4) IDq = 100 mA
Fig 8. Power gain as a function of output power; Fig 9. Drain efficiency as a function of output power;
typical values typical values
aaa-011228 aaa-011229
28 80 (3)
(1) (2) (4) (5) (6)
Gp ηD
(dB) (%)
26
60
24
40
22
(6)
(5)
(4)
(3) 20
20
(2)
(1)
18 0
0 200 400 600 800 1000 0 200 400 600 800 1000
PL (W) PL (W)
IDq = 100 mA; f = 108 MHz; tp = 100 s; = 20 %. IDq = 100 mA; f = 108 MHz; tp = 100 s; = 20 %.
(1) VDS = 25 V (1) VDS = 25 V
(2) VDS = 30 V (2) VDS = 30 V
(3) VDS = 35 V (3) VDS = 35 V
(4) VDS = 40 V (4) VDS = 40 V
(5) VDS = 45 V (5) VDS = 45 V
(6) VDS = 50 V (6) VDS = 50 V
Fig 10. Power gain as a function of output power; Fig 11. Drain efficiency as a function of output power;
typical values typical values
BLF184XR_BLF184XRS#4 All information provided in this document is subject to legal disclaimers. © Ampleon B.V. 2015. All rights reserved.
8. Package outline
A
F
D1
U1 B
q C
H1 w2 C c
1 2
H U2 p E1 E
w1 A B
3 4
b w3 Q
0 5 10 mm
scale
Dimensions
Unit(1) A b c D D1 e E E1 F H H1 p Q(2) q U1 U2 w1 w2 w3
max 4.72 6.17 0.15 20.02 19.96 9.53 9.50 1.14 19.94 3.38 1.70 34.16 9.91
mm nom 8.21 14.24 27.94 0.25 0.51 0.25
min 3.43 5.92 0.08 19.61 19.66 9.27 9.29 0.89 18.92 3.12 1.45 33.91 9.65
max 0.187 0.243 0.006 0.788 0.786 0.375 0.374 0.045 0.785 0.133 0.067 1.345 0.39
inches nom 0.323 0.56 1.10 0.01 0.02 0.01
min 0.135 0.233 0.003 0.772 0.774 0.365 0.366 0.035 0.745 0.123 0.057 1.335 0.38
Note
1. millimeter dimensions are derived from the original inch dimensions.
2. dimension is measured 0.030 inch (0.76 mm) from body. sot1214a_po
BLF184XR_BLF184XRS#4 All information provided in this document is subject to legal disclaimers. © Ampleon B.V. 2015. All rights reserved.
A
F
5
D1 C
U1
H1 w2 C c
1 2
H U2 E1 E
3 4
b w3 Q
0 5 10 mm
scale
Dimensions
Unit(1) A b c D D1 e E E1 F H H1 Q(2) U1 U2 w2 w3
max 4.72 6.17 0.15 20.02 19.96 9.53 9.50 1.14 19.94 1.70 20.70 9.91
mm nom 8.21 14.24 0.51 0.25
min 3.43 5.92 0.08 19.61 19.66 9.27 9.29 0.89 18.92 1.45 20.45 9.65
max 0.187 0.243 0.006 0.788 0.786 0.375 0.374 0.045 0.785 0.067 0.815 0.39
inches nom 0.323 0.56 0.02 0.01
min 0.135 0.233 0.003 0.772 0.774 0.365 0.366 0.035 0.745 0.057 0.805 0.38
Note
1. millimeter dimensions are derived from the original inch dimensions.
2. dimension is measured 0.030 inch (0.76 mm) from body. sot1214b_po
BLF184XR_BLF184XRS#4 All information provided in this document is subject to legal disclaimers. © Ampleon B.V. 2015. All rights reserved.
9. Handling information
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling
electrostatic sensitive devices.
Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or
equivalent standards.
10. Abbreviations
Table 12. Abbreviations
Acronym Description
CW Continuous Wave
ESD ElectroStatic Discharge
HF High Frequency
LDMOS Laterally Diffused Metal-Oxide Semiconductor
MTF Median Time to Failure
SMD Surface Mounted Device
UIS Unclamped Inductive Switching
VSWR Voltage Standing-Wave Ratio
BLF184XR_BLF184XRS#4 All information provided in this document is subject to legal disclaimers. © Ampleon B.V. 2015. All rights reserved.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
12.2 Definitions Ampleon product can reasonably be expected to result in personal injury,
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
Draft — The document is a draft version only. The content is still under
such equipment or applications and therefore such inclusion and/or use is at
internal review and subject to formal approval, which may result in
the customer’s own risk.
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein Applications — Applications that are described herein for any of these
and shall have no liability for the consequences of use of such information. products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
Short data sheet — A short data sheet is an extract from a full data sheet
further testing or modification.
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and Customers are responsible for the design and operation of their applications
full information. For detailed and full information see the relevant full data and products using Ampleon products, and Ampleon accepts no liability for
sheet, which is available on request via the local Ampleon sales office. In any assistance with applications or customer product design. It is customer’s
case of any inconsistency or conflict with the short data sheet, the full data sole responsibility to determine whether the Ampleon product is suitable and
sheet shall prevail. fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
Product specification — The information and data provided in a Product should provide appropriate design and operating safeguards to minimize the
data sheet shall define the specification of the product as agreed between risks associated with their applications and products.
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid Ampleon does not accept any liability related to any default, damage, costs or
in which the Ampleon product is deemed to offer functions and qualities problem which is based on any weakness or default in the customer’s
beyond those described in the Product data sheet. applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
12.3 Disclaimers avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any Limiting values — Stress above one or more limiting values (as defined in
representations or warranties, expressed or implied, as to the accuracy or the Absolute Maximum Ratings System of IEC 60134) will cause permanent
completeness of such information and shall have no liability for the damage to the device. Limiting values are stress ratings only and (proper)
consequences of use of such information. Ampleon takes no responsibility for operation of the device at these or any other conditions above those given in
the content in this document if provided by an information source outside of the Recommended operating conditions section (if present) or the
Ampleon. Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
In no event shall Ampleon be liable for any indirect, incidental, punitive,
the quality and reliability of the device.
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or Terms and conditions of commercial sale — Ampleon products are sold
replacement of any products or rework charges) whether or not such subject to the general terms and conditions of commercial sale, as published
damages are based on tort (including negligence), warranty, breach of at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
contract or any other legal theory. individual agreement. In case an individual agreement is concluded only the
Notwithstanding any damages that customer might incur for any reason terms and conditions of the respective agreement shall apply. Ampleon
whatsoever, Ampleon’ aggregate and cumulative liability towards customer hereby expressly objects to applying the customer’s general terms and
for the products described herein shall be limited in accordance with the conditions with regard to the purchase of Ampleon products by customer.
Terms and conditions of commercial sale of Ampleon. No offer to sell or license — Nothing in this document may be interpreted or
Right to make changes — Ampleon reserves the right to make changes to construed as an offer to sell products that is open for acceptance or the grant,
information published in this document, including without limitation conveyance or implication of any license under any copyrights, patents or
specifications and product descriptions, at any time and without notice. This other industrial or intellectual property rights.
document supersedes and replaces all information supplied prior to the Export control — This document as well as the item(s) described herein
publication hereof. may be subject to export control regulations. Export might require a prior
Suitability for use — Ampleon products are not designed, authorized or authorization from competent authorities.
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an
BLF184XR_BLF184XRS#4 All information provided in this document is subject to legal disclaimers. © Ampleon B.V. 2015. All rights reserved.
BLF184XR_BLF184XRS#4 All information provided in this document is subject to legal disclaimers. © Ampleon B.V. 2015. All rights reserved.
14. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information . . . . . . . . . . . . . . . . . . . . . 2
4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Thermal characteristics . . . . . . . . . . . . . . . . . . 3
6 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
7 Test information . . . . . . . . . . . . . . . . . . . . . . . . . 5
7.1 Ruggedness in class-AB operation . . . . . . . . . 5
7.2 Impedance information . . . . . . . . . . . . . . . . . . . 5
7.3 UIS avalanche energy . . . . . . . . . . . . . . . . . . . 5
7.4 Test circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
7.5 Graphical data . . . . . . . . . . . . . . . . . . . . . . . . . 8
7.5.1 1-Tone CW pulsed . . . . . . . . . . . . . . . . . . . . . . 8
8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
9 Handling information. . . . . . . . . . . . . . . . . . . . 12
10 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 12
11 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 12
12 Legal information. . . . . . . . . . . . . . . . . . . . . . . 13
12.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13
12.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
12.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
12.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
13 Contact information. . . . . . . . . . . . . . . . . . . . . 14
14 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.