Академический Документы
Профессиональный Документы
Культура Документы
PERSONAL DETAILS
CAREER OBJECTIVES
Seeking a challenging plant inspection and job in oil and gas field
To be acooperative, hardworking and successful employee
To get improved through new knowledge, experience and skills.
1
COURSES ATTENDED
July 2015 CSWIP 3.1 Welding Inspector IWICC, IKM Jasin, Melaka.
EDUCATION BACKGROUND
HIGHEST EDUCATION
2
WORK EXPERIENCES
Job Description:
The quality Control of equipment, which shall be accordance with this through Petronas
Technical Standard ( PTS ) and all another relevant document such as, reference standard and
Inspection References Plan ( IRP ) or sheme of examination.
Visual and Inspect Cleaning for DOSH Equipment.
Perform Hydrotest and Leak testing for DOSH Equipment Inspection.
Carried out External and Internal Visual Inspection
Job Description:
The quality Control of equipment, which shall be accordance with this through Petronas
Technical Standard ( PTS ) and all another relevant document such as, reference standard and
Inspection References Plan ( IRP ) or sheme of examination.
Witness for DOSH repair
To ensuring quality product
Visual and Inspect Cleaning for DOSH Equipment.
Perform Hydrotest and Leak testing for DOSH Equipment Inspection.
Carried out External and Internal Visual Inspection
Job Description:
The quality Control of equipment, which shall be accordance with this through Petronas
Technical Standard ( PTS ) and all another relevant document such as, reference standard and
Inspection References Plan ( IRP ) or sheme of examination.
3
To ensuring quality product
Visual and Inspect Cleaning for DOSH Equipment.
Perform Hydrotest and Leak testing for DOSH Equipment Inspection.
Carried out External and Internal Visual Inspection
Job Description:
To ensuring quality product
Visual and Inspect Cleaning for DOSH Equipment.
Carried out External and Internal Visual Inspection.
Job Description:
The quality Control of equipment, which shall be accordance with this through Petronas
Technical Standard ( PTS ) and all another relevant document such as, reference standard and
Inspection References Plan ( IRP ) or sheme of examination.
Visual and Inspect Cleaning for DOSH Equipment.
Perform Hydrotest and Leak testing for DOSH Equipment Inspection.
Carried out External and Internal Visual Inspection.
Job description:
Witness for reading UTTG
Do report.
4
7. Budiman Inspection Sdn. Bhd – ( October 2017 – November 2017 )
Job Description:
Perform for Dye penetration testing
Do daily report
Job description:
Witness for seak leak test of Valve
Witness for functional test of valve
Witness for visual inspection of valve
Witness for dimensional inspection for valve
Witness for painting inspection of valve
Witness for packing inspection of valve
Position : Technician
Project : NPS 6” & 8” ( Kerteh – Kuantan Cleaning / Pigging / Gauging ( 44KM )
Client : Petronas Gas Berhad
Job Description:
Load & Launch NPS 6” & 8” Pipe Gas Propane & Butane
Receive and retrieve 6” & 8”
Position : Technician
Project : Nps 36 Sitiawan - Gurun Cleaning / pigging / gauging & MFL ( 36’ * 130KM )
Client : Petronas Gas Berhad
Job Description:
Lead & Launch Nps 36” pipe gas butane
Receive and retrieve 36” BIDI
Deploy AGM
5
11. Sapura Kencana Petroleum Sdn Bhd. – ( March 2014 – Jan 2015 )
Job Description:
Assist Fabrication Team and QC Department on Inspection And preparing report and
complitation for Client review and acceptance
Prepared report for Material Verification Record(MVR) for Qc inspection and client review.
Prepared release note for blasting and painting inspector to release the materials for blasting
and painting work(raw materials ang joints after weld).
Prepared Fit-up report for QC Inspection and client review.
Prepared Notification for Inspection (NOI) request for Dimension Check(DC).
Prepared notification for visual inspection for QC and client review.
Prepared notification of inspection for NDT Technician for non destructive test activity.
Prepared notification of Inspection for Hardness test.
Prepare notification request for fairing activity as per approval client procedure such as verified
temperature cool down slowly to the ambient temperature before start weld.
Ensure latest approval issue for contruction drawing inspection.
Assist material controller and QC inspector for checked/verified materials before release to
blasting and painting work site such as verified length of material tally with latest approve afc
drawing.
Assist Qc on material inspection such as verified heat number control number ensure using
correct material inspection record traceability form.
Assist QC production engineer for marked up drawing before issue to engineering department
such as marked up for changed material length additional joint.
Assist qc surveyor for Dimension Check(DC) activity before and after weld.
Assist qc on checking fitup inspection such as verify wps , fitup joints condition free from
corrosion, spatter, approve joint design as per approve code and stantard and verified gap and
joint conditions check before qc and client inspector inspection.
Assist qc on visual inspection such as checking weld profile arc strike, crack.
Responsibility :
To assist Fabrication Team and QC Department on Inspection And preparing report and
compilation for Client review and Acceptance.
Prepared report for Material Verification Report(MVR) for QC inspection and client review.
6
Prepared Release Note for blasting and painting Inspector to release the material for blasting
and painting works (raw materials, and joints after weld).
Prepared Notification of Inspection (NOI) Fit-up report for QC inspection and client review.
Prepare Notification for Inspection (NOI) request for Dimension Check (DC).
Prepared notification for visual inspection for qc and client review .
Prepared notification of inspection for ndt technician for non destructive test activity.
Prepared Notification of Inspection (NOI) report for Hardness test.
Prepare notification request for fairing activity as per approval client procedure such as verified
temperature cool down slowly to the ambient temperature before start weld.
Check weld preparation (Gap, bevel angle, etc.) are as WPS.
Check pre-heat and interpass temperature are as per WPS.
Check welding sequence is correct.
Verify the weld joint is as per updated drawing.
Assist QC on material inspection such as beam and plate dimension checked verify correct heat
number, piecemark as per approve IFC drawing.
Assist QC production engineer for marked up the drawing before issue to engineering
Department such as marked up for sea fastening support, changed material length additional
joint.
Assist DC surveyor for Dimension Check(DC) activity before and after weld.
Assist qc on visual inspection such as checking weld profile arc strike, crack.
Responsibility:
Assist Fabrication Team and QC Department on Inspection And preparing report and
compilation for Client review and Acceptance.
Marked up the IFC drawing, cutting plan on any dimension issues or additional joint on site for
enginieering drawing revised.
Ensure correct WPS and welders are qualified to perform the joint welding.
Ensure dimensional check (DC) such as circumference of tubular,ovality out of roundness,
leveling, out of straightness, squareness and end of perpendicularity.
Perform visual inspection on weld joint ensure free from before call for client inspection.
Prepare notification of inspection NDTrequest as per NDT Matrix such as DPI, MPI, UT or RT
on the weld joint for client review and approval.
Prepared report for Material Verification Record(MVR) for Qc inspection and client review.
Prepared release note for blasting and painting inspector to release the materials for blasting
and painting work(raw materials ang joints after weld).
Prepared notification of inspection Fit-up report for QC Inspection and client review.
Prepared Notification for Inspection (NOI) request for Dimension Check (DC).
Prepared notification for visual inspection for QC and client review.
Ensure lamination check done on before cutting of material and welding attachment.
7
Prepared notification of inspection for NDT Technician for non destructive test activity.
12. Brothers Inspection & Training Sdn. Bhd. – ( Jan 2014 – March 2014 )
Position : Qc Inspector
Project : Major Outage Repair Boiler
Client : Budiman Inspection Sdn. Bhd
Owner : Malakof Tg. Bin Power Plant Sdn. Bhd
Assingnments :
Representative for Main Contractor at IHI Power System Malaysia as QC Inspector in Boiler
Pressure part.
Implement the Quality Control interventation point on the Inspection and test plan, ITP
(surveillance, witness, hold point and record review).
Job description:
Monitor and maintain control records for welding consumable and welder performance record.
Inspect for fit-up, alignment and visual inspection of all welds.
Carrying Welder’s Qualification Tests.
Welding consumable control.
Final dimension Inspection.
Review of isometric drawings and ensure approved WPS as well as qualified welders are
available.
Ensure that approved WPS are followed.
Prepare daily inspection reports.
Request for NDT if necessary.
Ensure that inspection / testing equipment at site are with valid calibration.
Co-Ordination with Client Inspector for daily welding activities and for stage inspection.
Maintain and update all quality related documents at site.
Position : Welder
Project : Install pipe Gas at UITM Puncak Alam
Client : Sunway Construction BHD
Job Description:
Prepared material before weld.
follow WPS before weld.
perform installation pipe before welding.
welding All position
8
14. Cheng Hua Engineering Sdn. Bhd. | Taman Sentosa Klang, Selangor – ( Jan 2013 – May 2013 )
Position : Welder
Job Description:
review drawing before welding.
using MIG and smaw welding process.
welding on target.
weld repair
15. Kencana Sapura Petroleum Sdn. Bhd. | Lumut, Perak. (July 2012 – December 2012 )
Position : Trainer
Project Description : SNPA-SNAA project- topside & topside
Client : Murphy Oil Sarawak
Job Description :
Attend daily tool box briefing and safety talk.
Practice good housekeeping and safety practice at work.
Training welder on 6G and 6GRposition for structure tubular and GTAW/SMAW.
Perform visual inspection training on test coupon during Welder Qualification Test(WQT).
Welding for piping fabrication.
Assist QC on arranging NDT work accepted test coupons and accepted weld joint.
Assist NDT technician on performing MPI, DPI and UT work.
Assist QC Engineer on welding parameter check during PQR and WQT at production welding.
Learn how to manage distortion during welding work by manage welding sequence and
preheating.
16. Tekskill Component Sdn. Bhd. | Taiping, Perak. – ( March 2010 – December 2012 )
Position : Welder
Job Description:
Prepare material before welding
Weld repair for sparepart motorcycle
Welding on target
9
SKILLS
COMPUTER SKILLS :
Microsoft Office Word
Microsoft office Excel
Microsoft office Power Point
Autocad
Solidwork
HARDWARE SKILLS :
SMAW
GTAW
GMAW
FCAW
ASME xii
LANGUAGE SKILLS :
Bahasa Malaysia.
English.
Japanese
PERSONAL STRENGTH:
Reliable and committed to work
Able to work in group
Able to present in front of crowded
Able to work under minimum supervision
Able to work under maximum pressure
Have self confident
Self motivated person.
REFERENCES
11