Академический Документы
Профессиональный Документы
Культура Документы
1. Reading Cards
Position a card in front of the blue reading head within 5 Press 1 time, display current time: , e.g.:
cm, then hold down the button for approximately 1
second. 4 flashes of the red indicator light accompanied
by 1 “beep” sound means that a reading has been Press 2 times,display data:
made. The LCD screen shows the last 4 digital code of Press 3, 4, 5 times, display hex card number in three
this card. (see Fig 1)
sections, e.g.: , ,
4. Data Upload
Connect the communication station to the PC USB port,
Fig 1 Reading Cards and place the probe reader in its indentation.
Running inspection management software , clicking
2.Turning On "Read Probe" operation button, and the software system
Press the button to turn on the reader. It may display the will automatically read inspection probe number,
current time. when GS-6000E doesn't read card; the LCD automatically calibrate the probe’s internal clock time,
screen displays the current time and the previous card upload, save and process data, etc.
reading data number in sequence.
Data Sheet
Card Format EMID
4MBit Flash RAM,
Memory
30,000Records
Reading Range 0~5cm
Power Capacity >500,000 Readings
Battery 3.6V lithium battery
Working Temp. -40℃~70℃
Working Hum. 0~95℅
Fig 2 Data Upload Dimensions 147×42×26mm
Weight 200g
When connecting the communication station with PC,
The buzzer will ring long, and the red indicator at top Status Indications
right corner will be lit long, meaning the communication 1. 1 Beep With 4 Flashes: Reading is successful.
station work right. 2. 4 Beeps With 4 Flashes and the LCD shows
5.First-Time Usage :
Before reading signal cards, should connect the probe The reader’s internal clock is erroneous and should be
with the PC first, and start the software to calibrate the calibrated with the PC before further reading card.
reader’s internal clock. Wait until it automatically shuts
down before performing readings. 3. Continuous Flashes: The batter is low and needs to be
changed.
Operation Instructions