Вы находитесь на странице: 1из 12

905-612-1 03-09_BG36.qxd 31.03.

2009 10:50 Uhr Seite 1

BG 36
Großdrehbohrgerät
Rotary Drilling Rig
3/2009

Geräteträger BS 80
Base Carrier BS 80
905-612-1 03-09_BG36.qxd 31.03.2009 10:50 Uhr Seite 2

Abmessungen Dimensions

Windenvorschub Crowd winch type


Die BG 36, ein Gerät mit einem 26200
Einsatzgewicht von ca. 114 to dient zur
Herstellung von
• verrohrten Bohrungen (Eindrehen des
Bohrrohres mit dem Drehgetriebe oder 24050
mit angebauter Verrohrungsmaschine)
• unverrohrten, flüssigkeitsgestützten
Bohrungen
• Bohrungen mit langer Hohlschnecke
(SOB) - mit oder ohne Kellyverlängerung

Kelly BK 40/470/3/30 (A=13250 mm)


• Sonderverfahren wie VdW-Bohren,
Doppelkopfbohren (“verrohrtes
SOB-Bohren”), Verdrängerbohrungen,
Soil-Mixing Verfahren (CSM und SMW)

10000
The BG 36 rotary drilling rig has an
operating weight of approx. 114 to. It is
ideally suited for:
• Drilling cased boreholes (installation of
casing by rotary drive or optionally by
hydraulic oscillator – both are powered
by the drilling rig)
• Drilling uncased deep boreholes that are

2000
stabilised by drilling fluid
13090
• Drilling boreholes with long hollow stem
augers (CFA system), with or without
kelly extensions
• Special drilling systems, such as
FOW piles, double rotary head drilling
(“cased CFA system”), displacement
Hub / Stroke 9250 mm

piles, soil mixing system (CSM and SMW)


9260
8900

1300

9500
Bohrverfahren mit
Serienausstattung:
Kellybohren (ohne Verrohrungsmaschine)
SOB-Verfahren (hydraulisch und 3840
elektrisch vorgerüstet)
FDP Verdrängerbohren (hydraulisch
und elektrisch vorgerüstet)
1840
1185

Drilling processes with


0
standard equipment: 4600
Kelly drilling (without casing oscillator) 5680
CFA drilling (pre-equipped with 4300 - 4650 4530
hydraulic and electric installations)
FDP Full-Displacement-Piling
(pre-equipped with hydraulic and
electric installations)

BG 36 (BS 80) – Großdrehbohrgerät BG 36 (BS 80) – Rotary Drilling Rig


905-612-1 03-09_BG36.qxd 31.03.2009 10:50 Uhr Seite 3

Abmessungen Dimensions

Zylindervorschub Crowd cylinder type

24200

21950

Kelly BK 40/470/3/30 (A=13250 mm)

10000
10890
Hub / Stroke 6500 mm

9500
7070
6800
Bohrverfahren mit 1300
Serienausstattung:
Kellybohren (ohne Verrohrungsmaschine)
4390
SOB-Verfahren (hydraulisch und
elektrisch vorgerüstet)
FDP Verdrängerbohren (hydraulisch 3430
und elektrisch vorgerüstet)
1185

Drilling processes with 570


0
standard equipment: 4600
Kelly drilling (without casing oscillator) 5680
CFA drilling (pre-equipped with 4300 - 4650 4530
hydraulic and electric installations)
FDP Full-Displacement-Piling
(pre-equipped with hydraulic and
electric installations)

BG 36 (BS 80) – Großdrehbohrgerät BG 36 (BS 80) – Rotary Drilling Rig


905-612-1 03-09_BG36.qxd 31.03.2009 10:50 Uhr Seite 4

Technische Daten Technical specifications


Windenvorschub Zylindervorschub
Crowd winch Crowd cylinder
Gesamthöhe Overall height 26.200 mm 24.200 mm
Einsatzgewicht ca. Operating weight (approx.)
(mit Kelly BK40/470/3/30 ) (with kelly BK40/470/3/30) 114.000 kg 110.500 kg
Drehantrieb Rotary drive KDK 367 S KDK 367 S
Drehmoment bei 320 bar (nom.) Torque at 320 bar (nominal) 367 kNm 367 kNm
Drehzahl max Speed of rotation (max.) 46 U/min (RPM) 46 U/min (RPM)
Vorschubsystem Crowd system
Druckkraft / Zugkraft (effektiv) Crowd pressure / pull (effective) 400 / 400 kN 250 / 400 kN
Druckkraft / Zugkraft Crowd pressure / pull measured at the
gemessen am Drehteller KDK casing drive adapter on the rotary drive 350 / 320 kN 350 / 320 kN
Hub (Kellysystem) Stroke (kelly system) 9.250 mm 6.500 mm
Hub (SOB-System) Stroke (CFA system) 18.700 mm 16.350 mm
Geschwindigkeit (ab/auf) Speed (down/up) 6,5 / 6,5 m/min 3,5 / 7,0 m/min
Schnellgang (ab/auf) Fast speed (down/up) 26 / 26 m/min 20 / 20 m/min
Hauptwinde Windenklasse Main winch winch classification M6 / L3 / T5 M6 / L3 / T5
Zugkraft (1. Lage) effektiv/nominal Line pull ( 1st layer) effective/nominal 250 kN / 317 kN 250 kN / 317 kN
Seildurchmesser / Länge Rope diameter / Length 32 mm / 90 m 32 mm / 90 m
Windengeschwindigkeit Line speed max. 71 m/min 71 m/min
Hilfswinde Windenklasse Auxiliary winch winch classification M6 / L3 / T5 M6 / L3 / T5
Zugkraft (1. Lage) effektiv/nominal Line pull ( 1st layer) effective/nominal 100 kN / 125 kN 100 kN / 125 kN
Seildurchmesser / Länge Rope diameter / Length 20 mm / 67 m 20 mm / 67 m
Windengeschwindigkeit Line speed (max.) 55 m/min 55 m/min
Mastneigung nach hinten / vorne Mast inclination backward / forward 15° / 5° 15° / 5°
quer Lateral Bohrbetrieb 3° Drilling mode 3°
Hilfswindenbetrieb 5° Aux. winch mode 5°

Serienausstattung Standard equipment


• Drehgetriebe KDK 367 S (Schaltgetriebe) • Rotary drive KDK 367 S (multi gear drive)
• Hauptwinde mit hydraulischer Freilaufsteuerung • Main winch with hydraulically operated freewheeling
• Haupt- und Hilfswinde mit Spezialrillung • Main and auxiliary winch with special grooving
• Hubendschalter für Haupt- und Hilfswinde • Hoist limit switch on main and auxiliary winches
• Wirbel für Hauptseil • Swivel for main rope
• Vorschub schnell / langsam • Crowd in fast or slow mode
• Seilvorschub: Mastverlängerung 2 m • Crowd winch system: mast extension 2 m
• Schwenkbarer Anschlagpunkt für Haupt- und Hilfsseil • Pivoted anchor points for main and auxiliary ropes
• Transportstützen für Mastoberteil und Mastunterteil • Transport supports for upper and lower mast sections

Mess- und Steuerungstechnik Measuring and control equipment


• SPS Rechner für alle elektrisch angesteuerten Funktionen • PLC processor for all electrically actuated functions
• B-TRONIC 2.1: elektronisches Steuerungs-, Kontroll- • B-TRONIC 2.1: Electronic monitoring-, control-
und Visualisierungssystem and visualization-system
• Anzeige von Fehlermeldungen in Klartext • Display of fault messages as plain text
• Schockiereinrichtung für KDK • Uni-directional impact function on KDK (for auger discharge)
• Notsteuerung Bohrgerät (Kernfunktionen) • Emergency mode of operation for drilling rig (core functions)
• Mastneigungsmessung in x/y Richtung (Anzeige digital/ analog) • Mast inclination measurement on x/y axes (digital/analog display)
• Mastautomatik (automatische Vertikalstellung) • Automatic vertical alignment of mast
• Hauptwinde mit elektronischer Seilkraftmessung • Electronic load sensing on main rope
• Hilfswinde mit hydraulischer Seilkraftmessung • Hydraulic load sensing on auxiliary rope
• Tiefenmessung Hauptwinde • Depth measuring device on main winch
• Tiefenmessung Vorschub (bei Windenvorschub) • Depth measuring device (on crowd winch system)
• Funktion "Wirbel aufstellen" Hauptwinde • Swivel alignment function on main winch
• Drehzahlmessung KDK • Speed measuring device on KDK
• Schlappseilabschaltung Hauptwinde • Rope slack prevention on main winch
• Anpresskraft-Einstellung • Crowd pressure setting
• Abbohrassistent Kelly • Crowd control system Kelly
• Ziehsteuerung • Tool extraction control system

BG 36 (BS 80) – Großdrehbohrgerät BG 36 (BS 80) – Rotary Drilling Rig


905-612-1 03-09_BG36.qxd 31.03.2009 10:50 Uhr Seite 5

Drehgetriebe Rotary drive

750

2420

2830
2700

1455

1645

1708
901
0
80
230

1300

2268
1900

Gewicht ohne Schlitten 7,8 to


Weight without sledge

KDK 367 S
Serienausstattung: Schaltgetriebe
• integriertes Kellydämpfungssystem Multi gear rotary drive
• Gleitleisten sind ohne Demontage
des Drehgetriebes auswechselbar 1. Gang Standardbetrieb 367
• auswechselbarer Kellymitnehmer 1st gear standard mode
• auswechselbare Mitnehmerleisten
M [kNm]

• Kardangelenk
• Hydraulische Verbindungen mit 114
Schnellkupplungen
• 4 einstellbare Betriebsmodi (siehe 0
0 7 22 n [1/min]
Diagramme)
• Transportstützen
1. Gang Einrichten und Felsbohren 367
• Hebegeschirr
1st gear Set up and rock drilling
M [kNm]

Standard equipment:
• Integrated kelly damping system
• Wear pads exchangeable without 0
removal of rotary drive 0 7 22 n [1/min]
• Exchangeable kelly drive adapter
• Exchangeable kelly drive keys 1. Gang MD reduziert 367
• Cardanic joint 1st gear MD reduced
• Quick-release couplers on hydraulic 257
M [kNm]

hoses
• 4 selectable modes of operation 114
(refer to diagramms)
• Transport supports 0
0 10 22 n [1/min]
• Slings gear for rotary drive
2. Gang Standardbetrieb 367
2 nd gear standard mode
M [kNm]

176
Drehmoment nominal
55
Darstellung nicht maßstäblich 0
nominal torque values 0 14 n [1/min] 46
not to scale

BG 36 (BS 80) – Großdrehbohrgerät BG 36 (BS 80) – Rotary Drilling Rig


905-612-1 03-09_BG36.qxd 31.03.2009 10:50 Uhr Seite 6

Geräteträger BS 80 Base carrier BS 80

Motor Engine CAT C15


Nennleistung ISO 3046-1 Rated output ISO 3046-1 354 kW @ 1800 U/min (rpm)
Motor spezifiziert nach Abgasnorm Engine conforms to Exhaust Emission Standard EEC 97/68EC Stage 3 und EPA/CARB TIER III
Dieseltank Diesel tank capacity 800 l
Umgebungstemperatur unter Vollast Ambient air temperature (at full power) bis (up to) 45° C
Schalldruckpegel in Kabine Sound pressure level in cabin
(EN 791, Anh. A) (EN 791, Annex A) LPA 78 dB(A)
Schalleistungspegel Sound power level
(2000/14/EG u. EN 791, Anh.A) (2000/14/EG u. EN 791, Annex A) LWA 114 dB(A)
Hydrauliksystem Hydraulic system Zweikreisbohrhydraulik
2-hydraulic circuit system for drilling
Hydraulische Leistung Hydraulic power output
(gemessen am Verteilerblock KDK) (measured at inlet to rotary drive) 277 kW
Hydraulikdruck Hydraulic pressure 320 bar
Fördermengen (Hauptkreise + Hilfskreis) Flow rates (main circuits + auxiliary circuit) 2 x 320 l/min + 1 x 130 l/min
Tankvolumen Hydraulic oil tank capacity 900 l
Unterwagen (Teleskopfahrwerk) Undercarriage (Retractable crawler frames) UW 110
Laufwerksklasse Crawler type B7
Spurweite (eingefahren/ausgefahren) Track width (retracted/extended) 2.600 / 3.800 mm
Fahrwerksbreite (eingefahren/ausgefahren) Overall width of crawlers (retracted/extended) 3.400 / 4.600 mm
3-Steg Bodenplatten Width of triple grouser track shoes 800 mm
Fahrwerkslänge Overall length of crawlers 5.680 mm
Zugkraft effektiv/nominal Traction force effective/nominal 750 kN / 885 kN
Fahrgeschwindigkeit Travel speed 1,3 km/h

Serienausstattung Standard equipment


• Motornotsteuerung • Emergency mode of operation for engine
• Leerlaufautomatik (zur Verbrauchsoptimierung) • Automatic idling mode (to optimise fuel consumption)
• Motordiagnostiksystem • Engine diagnostic system
• Diagnoseleiste für hydraulische Funktionen • Diagnostic panel for hydraulic functions
• abnehmbarer Ballast (5,0 + 5,0 + 10,3 t) • Removable counterweight (5,0 + 5,0 + 10,3 tons)
• abnehmbare Raupenträger • Removable crawler side frames
• Verzurraugen an Raupenträgern • Transport securing lugs on crawler units
• Aufstiegsleiter zum Oberwagen und Begehung am Oberwagen • Access ladder and catwalk on uppercarriage
• Bordbeleuchtungssatz ( 6 Scheinwerfer) • On-board lighting set ( 6 spotlights)
• Bordwerkzeugsatz • On-board tool set
• Elektrische Betankungspumpe • Electric refuelling pump
• Komfortfahrerkabine (Breite 950 mm) • High-comfort operator's cab (width 950 mm)
• Kabine mit FOPS Standard • Protective roof grate (FOPS compliant)
• Klimaanlage • Air conditioning system
• Radio und CD • Radio and CD player
• Trittroste (neben und vor der Kabine) • Catwalk (on side and in front of operator's cab)

BG 36 (BS 80) – Großdrehbohrgerät BG 36 (BS 80) – Rotary Drilling Rig


905-612-1 03-09_BG36.qxd 31.03.2009 10:50 Uhr Seite 7

Zusatzausstattung Optional equipment

Ausstattungserweiterung Additional equipment options


Grundgerät Base carrier
Kompressor (1000 l/min Saugleistung) Compressor (1000 l/min capacity)
Generator (13 kVA) Generator (13 kVA)
Bioölbefüllung Bio-degradable oil
Schraubstockanbau Vise attachment
Panzerverglasung Tempered safety glass panels
Standheizung mit Zeitschaltuhr Independent cab heater with time switch
Schutzbelüftung Pressurized air conditioning system

Bohrgerät Drilling equipment


Freifall Hauptwinde Freefall main winch
Freifall Hilfswinde Freefall auxiliary winch
Wirbel für Hilfsseil Swivel for auxiliary rope
Aufstiegsleiter am Mast Mast access ladder
Mastabstützung Mast support unit
obere Kellyführung Upper kelly guide
Schneckenputzer (Kellysystem) Auger cleaner (for kelly system)
Zentralschmierung Central lubrication system
Kameraanbau Video camera attachment
Drehmomentwandler für Kellyverfahren Torque multiplier for Kelly system
Drehmomentwandler für DKS Torque multiplier for DKS
Bohrgutabwurfeinrichtung für DKS BTM Telescopic spoil chute device for DKS BTM
Mechanische Anbauten für Automatikdrehteller Mechanical attachment for automatic casing drive adapter
Vorrüstung Automatikdrehteller Pre-equipped for automatic casing drive adapter
(hydraulisch / elektrisch) (hydraulic / electrical)
Vorrüstung Sonderbohrverfahren Pre-equipped for special drilling systems
Traverse für Single Pass Verfahren Spreader beam for single pass process
Verrohrungsmaschinenanbau (max. BV 2000 HD-07) Oscillator attachment (max. BV 2000 HD-07)

Mess- und Steuerungstechnik Measuring and control equipment


Fernübertragung der Betriebsdaten Remote transmission of process and operating data
Überlastschutz für Hauptseil Overload protection device on main rope
Hilfswinde mit elektronischer Seilkraftmessung Electronic load sensing on auxiliary rope
Abbohr- und Ziehassistent für „Single Pass“-Verfahren Crowd control assistance and tool extraction assistance
for “Single Pass” systems

Ausstattungsvarianten Alternative equipment options


Vorschubzylinder 7,65 m Crowd cylinder 7,65 m
Hauptwinde 300 kN (Huckepack) Main winch 300 kN (mounted on top of uppercarriage)
Unterwagen UW 120 Undercarriage UW 120
Bodenplatten 900 mm Width of triple grouser track shoes 900 mm
Bohrachserweiterung auf 1550 mm Drill axis extension to 1550 mm
Gittermastverlängerung (für SOB und FDP) Lattice mast extension (for CFA and FDP)

Seilvorschub: Mastverlängerung 3 m (anstatt 2 m) Crowd winch system: mast extension 3 m (replacing 2 m)

Zylindervorschub: Mastverlängerung 2 m Crowd cylinder system: mast extension 2 m


Zylindervorschub: Verlängerung Mastunterteil 0,8 m Crowd cylinder system: extension lower mast 0,8 m

BG 36 (BS 80) – Großdrehbohrgerät BG 36 (BS 80) – Rotary Drilling Rig


905-612-1 03-09_BG36.qxd 31.03.2009 10:50 Uhr Seite 8

Transportdaten Transport data


Gewichtsangaben sind ca. Werte, Zusatzausrüstungen (Optionen) können das Gesamtgewicht verändern
Weights shown are approximate values; optional equipment may change the overall weight

3060

1130

1130
800 2552 4600
397

2370 2370
3400 4150 5680
7500 G= G=
9,7 to 9,7 to
G = 30 to

3100
G = 18,6 to
Breite = 2450 mm
300 (Width)
715
Ø 350

6030
10500
G = 2 x 1,75 to

10000
G = 1,3 to
3250

Breite = 900 mm G = 9 to
(Width) Breite = 1960 mm

1400
(Width)
12500
800

2000
2240

10000
3250

G = 7 to
Breite = 1960 mm
1400

(Width)
12300
3450

3420

2700

1645
1185

5680 1900
200

12300 4530
G = 7,8 to
G = 92,6 to
3450

3420

1500

1500

1500
1185

5680
200

200 200 575


12300 4150

G = 71,5 to G= G= G=
5,0 to 5,0 to 10,3 to

BG 36 (BS 80) – Großdrehbohrgerät BG 36 (BS 80) – Rotary Drilling Rig


905-612-1 03-09_BG36.qxd 31.03.2009 10:50 Uhr Seite 9

Anwendungen Applications

Kellybohrverfahren Kelly drilling system


Standardverfahren: unverrohrt, oder Einbau der Bohrrohre mit Drehgetriebe Zusatzausstattung /
Option: Einbau der Bohrrohre mit angebauter hydraulischer optional equipment:
Verrohrungsmaschine
Anbau Verrohrungsmaschine
Standard system: Uncased drilling or installation of casing with rotary drive Attachment of hydraulic oscillator
Optional: Installation of casing with hydraulic oscillator attached to the drilling rig BV 2000 HD-07

24050

3840
Hw

Bohrtiefen Drilling depths


Windenvorschub Zylindervorschub
Crowd winch Crowd cylinder
B

Kellytyp A (m) B (m) Gewicht Hw (m) T (m) Hw (m) T (m)


Type of kelly bar Weight (kg)
T

BK 40/470/3/27 12,25 30,16 7.100 8,90 28,00 6,80 27,40


BK 40/470/3/30 13,25 33,16 7.650 8,90 31,00 6,80 30,40
BK 40/470/3/36 15,25 39,16 8.750 6,90 37,00 4,80 36,40
BK 40/470/3/42 17,25 46,16 9.850 4,90 43,00 2,80 43,40
BK 40/470/4/40 13,25 42,79 10.500 8,90 40,60 6,80 40,00
BK 40/470/4/48 15,25 50,79 12.000 6,90 48,60 4,80 48,00
1700

BK 40/470/4/52 16,25 54,79 12.750 5,90 52,00 3,80 52,00


BK 40/470/4/60* 18,25 62,79 14.250 3,90 60,60 1,80 60,00
BK 40/470/4/68* 20,25 70,79 15.000 1,90 68,60 – –
* 3. Gegengewicht 5,0 to erforderlich (ab Kelly 4/60)
* allowed with 3 rd counterweight 5,0 to only (from kelly 4/60 and more)

Bohrdurchmesser Drilling diameter


Unverrohrt Uncased 2.300 mm 2.500 mm
Bemerkungen zur Bohrdatenermittlung Verrohrt Cased 2.000 mm 2.200 mm
siehe „Kellystangen 905.518.1“
For further details on the acquisition of
Bohrrohrlängen Length of casing sections
drilling data please refer to Ohne BV Without casing oscillator Hw – 0,5 m Hw – 0,5 m
“Kelly Bars 905.518.1” Mit BV With casing oscillator Hw – 1,5 m Hw – 1,5 m

BG 36 (BS 80) – Großdrehbohrgerät BG 36 (BS 80) – Rotary Drilling Rig


905-612-1 03-09_BG36.qxd 31.03.2009 10:50 Uhr Seite 10

Anwendungen Applications

SOB – Bohrverfahren CFA – Drilling system


hydraulische Mastabstützung erforderlich
hydraulic mast support required 32490
Zeichnung: Kombinierte Zugkraft mit Vorschubwinde + Hauptwinde mit
modifizierter Aufhängung und Traverse
Drawing: Combined extraction force with crowd winch + main winch
with modified connection and spreader beam

8000
25680

22600 22600

19800 19800
Schlittenhub / Stroke of sledge 18.700 mm

Schlittenhub / Stroke of sledge 18.700 mm

Schneckenlänge / Auger length 19.400 mm


Schneckenlänge / Auger length 19.400 mm

1300 1300
1185

300 300 1185


0 0
4300 4530 4300 4530

Vorschubsystem Windenvorschub Zylindervorschub


Crowd system Crowd winch Crowd cylinder
Kellyverlängerung -- 8,0 m -- 8,0 m
Kelly extension
Bohrtiefe mit Schneckenputzer 17,00 m 25,00 m 14,70 m 22,70 m
Drilling depth with auger cleaner
Bohrtiefe ohne Schneckenputzer 18,10 m 26,10 m 15,80 m 23,80 m
Drilling depth without auger cleaner
Max. Bohrdurchmesser 1.200 mm 1.200 mm 1.200 mm 1.200 mm
Max. drilling diameter
Max. Zugkraft 400 kN 400 kN 500 kN 500 kN
Max. extraction force
Max. Zugkraft mit Haupt- und Vorschubwinde (effektiv) 900 kN 900 kN
Max. extraction force with main- and crowd winch (effective) (500 +400 kN) (500 +400 kN)
Max. Anpresskraft 350 kN + Schneckengewicht Gewicht KDK + Schnecke
Max. crowd force 350 kN + auger-weight Weight of rotary drive + auger
Schneckenlänge L (inkl. Anfänger) 19,40 m 17,40 m
Continuous flight auger length L (incl. starter auger)

max. Bohrtiefe 30 m bei Verwendung der Gittermastverlängerung 13 m (Option)


max. drilling depth 30 m when using the lattice mast extension 13 m (optional)

BG 36 (BS 80) – Großdrehbohrgerät BG 36 (BS 80) – Rotary Drilling Rig


905-612-1 03-09_BG36.qxd 31.03.2009 10:50 Uhr Seite 11

Anwendungen Applications

DKS – Doppelkopfverfahren DKS – Double rotary drive system


DKS mit Drehantrieb (Schnecke) und Drehmomentwandler (Bohrrohr) Systemvoraussetzungen:
3. Gegengewicht 5,0 to
DKS with rotary drive for auger and torque multiplier BTM for casing
Seilvorschub
Hydraulische Mastabstützung
System requirements:
3 rd counterweight 5,0 to
26790 Crowd winch type
Hydraulic mast support

KDK 367 S

BTM 400

17675
Schlittenhub / Stroke of sledge 17500 mm

1300
1185

480
0
4300 4700

KDK 367 S + BTM 400 DKS


Drehantrieb für Bohrrohr BTM 400 DKS
Rotary drive for casing
Drehantrieb für Schnecke KDK 367 S
Rotary drive for auger
Durchmesser (max.) 880 mm
Diameter (max.)
Bohrtiefe 17,00 m
Drilling depth
Zugkraft (max.) 900 kN
Extraction force (max.) (500 + 400 kN)
Vertikale Relativverschiebung der Drehantriebe 550 mm
Relative vertical movement between rotary drives
Einsatzgewicht (ca.) 138.000 kg
Operating weight (approx.)

BG 36 (BS 80) – Großdrehbohrgerät BG 36 (BS 80) – Rotary Drilling Rig


905-612-1 03-09_BG36.qxd 31.03.2009 10:50 Uhr Seite 12

Weitere Verfahren Additional systems

VdW SMW FDP


Vor-der-Wand Bohren Soil Mixing Wand Verfahren Verdrängerbohren
Front-Of-Wall drilling (FOW) Soil Mixing Wall system Full Displacement Piling

Anbauten Fräsverfahren Cutter system attachments

CSM BC / BG
Cutter Soil Mixing Anbau Schlitzwandfräse BC
BC Diaphragm wall cutter on BG

BAUER Maschinen GmbH


Wittelsbacherstraße 5
D-86529 Schrobenhausen
Tel. + 49 (0)82 52/97-0
Fax + 49 (0)82 52/97-11 35
e-mail: BMA@bauer.de
www.bauer.de
www.bauer-equipment.com

Technische Änderungen ohne Vorankündigung und Technical Specifications are subject to change without
Verpflichtung gegenüber früher gelieferten Geräten prior notice and incurring responsibility for machines
vorbehalten. Die abgebildeten Geräte können previously sold. The shown machines may have special
Sonderausstattungen haben. Technische Daten equipment. Technical data do not consider power losses.
ohne Berücksichtigung des Wirkungsgrades. Error and misprints reserved.
Irrtum und Druckfehler vorbehalten.
905.612.1 3/09

Вам также может понравиться