Академический Документы
Профессиональный Документы
Культура Документы
Normally Open (NO) switches work the opposite way of NC switches. NO switches are the open type; they
work by grounding the primary ignition lead when the tether is pulled away from the bars.
Warning: Ensure that you purchase the correct kill switch! To discover which type of switch you will require,
please consult your Service Manual, contact your dealer, use the Switch Testing Procedure below, or consult
the Model Compatibility list at bottom. Installing the incorrect switch type can lead to serious damage to the
ignition and/or electrical system making the vehicle unusable.
Warning: Always disconnect the power supply BEFORE you begin installation. Failing to do this could result in
serious damage to the electrical system or serious, even life-threatening, injury to the installer.
This tether kill switch is Normally Open. If you are unsure whether this is correct for your machine you
must perform the following test.
*This example works for a Honda TRX400EX or a TRX450R, wiring colors may differ for various makes.
Before making final wire connections, test the tether kill switch to ensure it is working properly.
Final Connections
Make sure to properly connect the wires once testing is successful. (Solder, Heat Shrink)
Make sure your wires are properly tucked into a harness, or at least zip tied out of the way.
Honda:
TRX 450 /R /F /E /ER Uses NO switches. Ignition wires are Black/White.
TRX 450 /ES /FE /FM /S Uses NC switches. Ignition wires are Black/White.
TRX 420 / 300EX / 90 Uses NC switches. Ignition wires are Black/White.
TRX 400EX Uses NO switches. Ignition wires are Black/White.
TRX 700 Uses NC switches. Ignition wires are Black/White.
Kawasaki:
KFX 450R/700 VF Uses NC switches. Ignition wires are Yellow/Red.
KFX 400/250 Uses NC switches. Ignition wires are Orange/White.
KFX 90/50 Uses NO switches. Ignition wires are Blue/Yellow.
Suzuki:
Quadracer LTR 450 Uses NC Ignition wires are Orange/White.
Quadsport LTZ 400/250/90/50 Uses NC Ignition wires are Orange/White.
Yamaha:
YFZ 450S /V /SE /RY Uses NC switches. Ignition wires are Red/Black.
YFM 250/660/700 Uses NC switches. Ignition wires are Red/Black.
YFM 350 /X /XA /80/50 & Banshee Uses NO switches. Ignition wires are Black/White.
YFM 350 /A /AS /FGIW Uses NC switches. Ignition wires are Red/Black.
Can-Am:
DS 70/90/90X Uses NC switches. Ignition wires are Black/White.
DS 450 Uses NC switches. Ignition wires are Violet/Tan.