Академический Документы
Профессиональный Документы
Культура Документы
Application
DISOCONT Tersus is a system in modu- At a glance - easy service because of Fieldbus communication modules
lar design for controlling of continuous the combination of mechanics and plugged into system unit for transfer
weighing and feeding applications. It is electronics of all relevant data to the user’s
used wherever bulk solids flow has to be control and scale control system
measured, fed or batched with the use of For special applications the DISOCONT Additional VCU-unit for conventional
Tersus-electronics may be conventionally connection to user’s control system
Loss-in-weight feeders installed in a control cubicle. and expanded control of the scale
(measuring/feeding) Via the Ethernet interface included in the environment
Weighfeeders standard or equipped with a suitable Operator panel with graphical display
Mass flow meters and feeders fieldbus interface DISOCONT Tersus fits and touch for operation of the scale
Solids flow meters and feeders optimal into automation structures in the and/or parameterization
Belt weighers plant. Integrated web server for service
Screw feeder access
Weighing hoppers Equipment Group control unit-operation, survey
and control of scale groups, as shown
The DISOCONT Tersus electronics con-
The DISOCONT Tersus - electronics are in separate spec sheet
sist of a system unit VCU and multiple
preferably integrated locally into the scale Access via LAN, WLAN and Bluetooth
optional expansion units. Its modular
mechanics. So self-contained function
design enables the requisite units to be
units will be created - the MechaTronic The internal DISOCONT Tersus commu-
combined for a specific application, at a
scales - which offers numerous ad- nication bus permits a flexible arrange-
most cost effective price.
vantages: ment of the units, locally or in cabinets.
Reduced engineering because of All modules can be replaced with no
Central unit VCU for all measurement
minimal number of interfaces; need for recalibration and recon-
and control functions with interface to
only one unit has to be planned in figuration.
operator panels and extension units
No control cubicle
EasyServe-PC-program for
Reduced cabling; only power and The System includes housing options for
commissioning and service
data cables have to be run installation at site and in control cubicles.
BV-D2398GB
Technical features for all
weighing and feeding systems
System accuracy for scales With feeding applications, the - Auto-calibration (automatic
better than 0,05 % control deviation is acquired by calibration programs), self-
(DIN EN 61143-1); Resolu- feed rate set/actual comparison. starting taring
tion of the weight signal: Depending on type of scale, - Block control with weigh-
24 million parts DISOCONT Tersus routes a feeders leads to constant
galvanically isolated inputs/ control signal to belt load realized by pre-
outputs speed-controlled weighfeed- feeder control
power fail save data storage er drive or the drive of the - On Stream calibration
feed helix
factory presettings for easy
controllable loss-in-weight With solids flow meters and
and quick commissioning
feeder discharge unit feeders:
various languages loadable/
controllable solids and mass - Adaption to different measur-
transferrable
flow feeders’ prefeeders ing chute characteristics
status, event, calibration, and - Manual and automatic
batch reports The control circuit exactly con- zeroing
Batch control with adaptive trols the actual feed rate for con- - On Stream calibration
cut-off curve formity with setpoint.
With mass flow meters and
Integrated diagnostics and
In batching mode, DISOCONT feeders:
self testing functions (SPC)
Simulation mode for testing Tersus feeds a preset amount of - Accurate speed and torque
and learning material and automatically stops measurement
feeding at the end of a batch. - Manual and automatic
System uses batch results for zeroing
Functions automatic self optimization. - Highly constant feeding
DISOCONT Tersus is designed - On Stream calibration
to acquire the actual feed rate Scale Specific Functions
[kg/h, t/h] via With Loss-in-Weight feeders
Depending on the software load- (measuring and feeding):
belt load and belt speed for ed for the different types of
belt weighers MULTIBELT scales an feeders, the following - Adaptive FUZZY interference
functions are available: peak elimination
changes in weight of material - Automatic correction of
in weigh hopper per unit of With belt weighers and material flow properties
time for loss-in-weight weighfeeders: during filling
feeders - Accurate belt speed - Highly constant feeding
reactive force for solids flow measurement - sets of parameters for quick
meters MULTISTREAM - Belt run monitoring adaptation on different bulk
- Shifting of control for solids
direct mass flow measure- weighing/feeding to point of
ment using the Coriolis force discharge - Setup programs for fast
for mass flow meters - Belt influence compensation change of bulk material
MULTICOR (BIC) With Sequential batching:
the load of the feeding screw - Complete control of scales - Sequence of up to
with automatic calibration via peripheral devices 10 material types
a check hopper for screw - Adaptive feed control
feeders type MultiFlex
With Screw feeders:
- Individual measurement of
up to three load points
- Feeding with high constancy
- On Stream calibration
DISOCONT Tersus Component-Overview Technical Data
BV-D2398GB 1403 All information is given without obligation. All specifications are subject to change. © by Schenck Process GmbH, 2014
Interfaces Ethernet RJ45 and local bus
Approbation CE
Optional: UL, ATEX
154
40 70 50 75
202
5,5 5,5
+1,1
186