Академический Документы
Профессиональный Документы
Культура Документы
S P E C I F I C AT I O N S H E E T
MasterSeries 870V
Size: 212" - 10" (65mm - 250mm)
Materials
Main Valve Body: Coating: Shutoff Valves: Elastomer Discs: Spring: Ductile iron Grade 65-45-12 Fusion epoxy coated internal and external AWWA C550 NRS and OS&Y resilient wedge gate valves AWWA C509 EPDM Stainless steel MODEL 870V DOUBLE CHECK ASSEMBLY (Shown in standard orientation)
Trim: Bronze
Pressure Temperature
Max. Working Pressure: 175psi (12.1 bar) Hydrostatic Test Press: 350psi (24.1 bar) Temperature Range: 32F to 140F (0C to 60C)
Approvals
ANSI/AWWA (C510) Approved by the Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California. * * 1015 B64.5
* Less gate not FM approved. Less gate not UL Classified unless installed with UL Listed gate valves.
Models
Valve Setter with MJ x MJ, MJ x FL, or FL x FL ends UL/FM OS&Y RW Gate Valves Wye Strainer End Connections: Flanged ANSI B16.1 Class 125
Job Name Contractor Job Location Approval Engineer Contractors P .O. No.
Approval Representative
FEBCO product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact FEBCO. FEBCO reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on FEBCO products previously or subsequently sold.
Description
Material A536 GR 65-45-12 A536 GR 65-45-12 EPDM ASTM D2000 Plated Steel Plated Steel A536 GR 65-45-12 B524 Alloy C83600 EPDM ASTM D2000 B584 Alloy C83600 Acetal Resin 304 SS 302 SS 302 SS EPDM Coated GR, 45 Ductile Iron w/ type 304 SS Silicone ASTM D2000 ASTM A743 304 SS ASTM A743 304 SS 18-8 SS 304SS B584 Alloy C83600 304SS 18-8 SS A313 Type 631 SS B130 Alloy C22000 B584 Alloy C83600 Acetal Resin
Description Pivot Bearing Flange Gasket Bearing Socket Hex Jam Nut Capscrew (10" Only) Washer Flange Nut Flange Nut Cover Bolt Washer Nut Gasket O-ring Back Up Ring Cover Ball Valve Nipple Gate Valve (NRS) Bulkhead Fitting Bulkhead Fitting Gasket Gasket Nut Nut Identification Plate Drive Screw Clamp 870V Only
Material B585 Alloy C83600 Rubber/Fabric Acetal Resin 18-8 SS 18-8 SS 302 SS Plated Steel Plated Steel A36 Stl. Epoxy Coated Plated Steel Plated Steel Plated Steel EPDM ASTM D2000 EPDM ASTM D1999 Acetal Resin B584 Alloy C83600 B584 Alloy C83600 Brass AWWA C509 B584 Alloy C83600 B584 Alloy C83600 EPDM ASTM D2000 EPDM ASTM D2001 B584 Alloy C83601 B584 Allloy C83602 B36 Alloy C26000 Stainless Steel AWWA C606
1 Body 2 Cover 2.1 O-ring 2.2 Cap Screw 2.3 Hex Nut 2.5 Cover (w/o holes) 3 Seat Ring 3.1 Gasket 4 Arm 4.1 Bushing-Swing Pin 4.2 Swing Pin 5 Retaining Clip 5.1 Retaining Clip 6 Check Disk (21/2" - 8") Seat Disc (10" Only) 6.1 Disc Holder (10" Only) 6.2 Disc Retainer (10" Only) 6.3 Capscrew (10" Only) 7 Load Pin 8 Lower Sprg. Retainer 9 Spring Stem 9.1 Elastic Stop Jam Nut 10 Spring 11 Spring Guide 12 Upper Sprg. Retainer 12.1 Bushing Sprg. Stem
F C K K F
C G A B
G B
Note: The Model 870V is shipped in the standard (N-Shape) orientation as shown above.
Dimensions Weights
Size: 212" - 10" (65 - 250mm)
size (DN)
A in. mm in. mm in. B mm in. C mm E NRS in. mm in.
Dimensions
E1 OS&Y* mm in. F mm in. G mm in. J mm in. K mm in. M mm NRS lbs
Weight
OS&Y lbs. kgs. kgs.
212 3 4 6 8 10
2534 654 2534 654 2778 708 3214 819 3712 953 4212 1080
2414 616 2434 629 2634 680 3214 819 3638 924 4034 1035
2714 692 190 2814 718 260 31 787 300 3714 946 460 4112 1054 780 48 1219 1320
86 200 118 270 136 320 209 500 354 840 599 1450
*OS&Y OPEN Weights do not include risers or optional valve setter. Note: Dimensions shown are nominal. Allowances must be made for normal manufacturing tolerances. Refer to Specification Sheet ES-F-611 for details on valve setter.
Typical Installation
Standard orientation (Model 870V) 18" (450mm) min 8"min (200mm) 18"min (450mm) 18"min (450mm) Vertical orientation (Model 870V) 18"min (450mm)
8"min (200mm)
8"min (200mm)
18"min (450mm)
Flow
Flow
4"min (100mm)
Recommended minimum clearances from permanent structures for ease of testing and maintenance are shown on above drawings.
Capacity
kPa psi 138 20 124 18 110 16 97 14 83 12 69 10 55 8 41 6 28 4 14 2 0 0
212" (65mm)
6" (150mm)
0 50 100 150 200 250 300 400 450 gpm 0 190 379 570 760 950 1140 1520 1710 lpm
0 0 0 200 400 600 800 1000 1200 1400 1600 gpm 0 760 1520 2280 3040 3800 4542 5300 6057 lpm kPa psi 97 14 83 12 Head Loss (psi) 69 10 55 8 41 6 28 4 14 2 0 0
3" (80mm)
8 (200mm)
0 50 100 150 200 250 300 350 400 450 500 gpm 0 190 379 570 760 950 1140 1330 1520 1710 1900 lpm
0 500 1000 1500 2000 2500 3000 gpm 0 1900 3800 5678 7570 9464 11356 lpm
kPa psi
138 20 124 18 110 16 97 14 83 12 69 10 55 8 41 6 28 4 14 2 0 0 0 100 200 300 400 500 600 700 800 gpm 0 379 760 1140 1520 1900 2280 2660 3040 lpm
4" (100mm)
10" (250mm)
0 1000 2000 3000 4000 5000 gpm 0 3800 7570 11356 15142 18927 lpm
The 6" and 10" flow curves (B-standard orientation) include the FEBCO valve setter Series 611.
USA: Fresno, CA Tel: (559) 441-5300 Fax: (559) 441-5301 www.FEBCOonline.com Canada: Burlington, ON Tel: (905) 332-4090 Fax: (905) 332-7068 www.FEBCOonline.ca
ES-F-870V 1119
2011 FEBCO