0 оценок0% нашли этот документ полезным (0 голосов)
81 просмотров1 страница
This bill of materials lists the components needed for an RFID device including:
1) An RFID IC, PCB, switch, inductors, capacitor, and resistors from various manufacturers.
2) Green, red, and yellow LEDs from Rohm.
3) A header connector from FCI and shorting jumper from Multicomp.
4) A battery holder and coin cell battery from Renata to power the device.
This bill of materials lists the components needed for an RFID device including:
1) An RFID IC, PCB, switch, inductors, capacitor, and resistors from various manufacturers.
2) Green, red, and yellow LEDs from Rohm.
3) A header connector from FCI and shorting jumper from Multicomp.
4) A battery holder and coin cell battery from Renata to power the device.
This bill of materials lists the components needed for an RFID device including:
1) An RFID IC, PCB, switch, inductors, capacitor, and resistors from various manufacturers.
2) Green, red, and yellow LEDs from Rohm.
3) A header connector from FCI and shorting jumper from Multicomp.
4) A battery holder and coin cell battery from Renata to power the device.