Академический Документы
Профессиональный Документы
Культура Документы
119
Switch disconnector
www.elmarkgroup.eu
The series of switch disconnectors EL-D02 are developed for short-circuit protection. They have a high speed of start and
high reliability. They have a plastic body of inflammable plastics adapted for mounting on a DIN rail, where a porcelain
round plug, which is filled with fine quartz sand for extinguishing the electric arc. In this ceramic body is mounted melting,
specifically profiled plate, which connects the input power terminals. These terminals are produced from copper alloy with
especially laid nickel layer and contact with the projecting bolts from the plastic body. Locking system for the security plug
on replacement of burnt out.
Technical characteristics:
* Rated voltage: 600V
* Insulation voltage: >2500V
* Rated current on short-circuit: 120 кА
* Direct mounting to the load
Documents corresponding to * Two insulated points to the load
* Protection rate: IP 44
the product:
* Cross-section of the supply conductors: up to 35mm2
Standard EN 60947-3
* Environmental temperature: -5° до +55°С
VDE 0638
* Altitude: up to 2000m
Type Number of poles Rated current Type of the fuse Catalogue number Box / Carton
(А)
Type of the fuse Voltage Rated current Size of the fuse Catalogue
(V) (А) number