Академический Документы
Профессиональный Документы
Культура Документы
Concealed
cam-action
door closer system
DORMA ITS 96
W T
DORMA ITS 96
d
D
Concealed cam-action door closer system DORMA ITS 96
Q E
DORMA ITS 96 Concealed cam-action
door closer system d
D
Uncompromising technical Data and features ITS 96
sophistication Variable
closing force Spring strength
EN EN
2–4 3–6
The DORMA ITS 96 has slender dimensions of the Standard doors up to 1100 mm 2 2
ushered in a new era in door unit, the DORMA ITS 96 up to 1400 mm – 2
closer technology. The closer can be installed in virtually
body and slide channel all doors with thicknesses of External doors, outward opening – –
are so compact that they 40 mm or more, and offers Fire and smoke check doors up to 1100 mm 2 2
can be installed out of sight all the advantages of quality up to 1400 mm – 2
in doors and their frames. assured manufacture with Door leaf thickness equal to/greater
These devices offer the third-party auditing. than 40 mm 2 –
same high quality expected equal to/greater
of DORMA door closers, as Quality-assured manufacture
to ISO 9001,
than 50 mm 2 2
characterised by their ease EN 29001, Max. door leaf weight in kg 100 180
BS 5750.
of operation for the user,
and wide range of functions.
Certified and verified by
BSI Quality Assurance Non-handed design (closer) 2 2
Reg.-No. Q 6423, FM 10756
Thanks to the exceptionally Arm Slide channel 2 2
Closing force variable by means
of adjustable screw 2 2
Plus points...
Closing speed adjustable by means of valve 2 2
...for the trade ...for the specifier/architect Latching speed adjustable
2 Low inventory costs and 2 Unblemished appearance by means of valve 2 2
reduced stocking require- of prestige doors thanks to Cushioned limit stay, mechanical 2 2
ments thanks to stream- concealed installation.
Delayed action – –
lined modular system 2 Ideal for doors integral to
and separate packaging of the interior design. Hold-open " "
closer body and slide Max. door opening angle
channel assemblies. (depends on door design) approx.120°
2 Tailor-made applications ...for the user
2 Optimum protection against Weight in kg 1.3 2.5
with special accessories.
vandalism thanks to the Dimensions in mm Length 277 291
...for the installer concealed installation. Width 32 39.5
2 Non-handed system. 2 Enhanced user convenience Height 42 51
2 Can be incorporated within and fully controlled, Door closer tested to EN 1154 A 2
the door pre-fabrication reliable closing with
Hold-open devices tested to EN 1155 2
process, allowing complete adjustable latch action.
installation in the factory. 2 Cushioned limit stay with Door co-ordinators tested to EN 1158 2
2 Easy adjustment of the progressive damping 2 Yes – No " Option
closing strength, closing for protection of wall and
speed and latch action door. Further information
after hanging of the doors. Additional information about many of our products is
available from a range of electronic media (Internet,
CD-ROM, diskettes). The abbreviated codes next to the
computer symbol indicate the search terms.
515 (512)
440
20 400
20
12
3
8,5
74,5 (65,5)
(42)
51
334 (320)
96 (93)
9 9
R8
(32)
20
40
Q E
DORMA ITS 96 Concealed cam-action
door closer system d
D
Adjustment of settings
The functions of the DORMA
ITS 96 can be individually
adapted to the local condi-
tions of each application.
The closing strength can be 32 approx.
easily varied in accordance 120° approx.
80°
with the door width via the 4 2 3
adjustment screw accessible
from the top. The closing
speed and the latch action 1
can likewise be modified at 2 Fully controlled closing with
any time using adjustment adjustable speed
screws at the top, even after 3 Adjustable latch action
the door has been hung. 4 Cushioned limit stay
Q E
DORMA ITS
TS 93
96 Applications
Gleitschienen-
and installation
Türschließersystem d
D
The DORMA ITS 96 and the two different slide G 96 N G 96 N
concealed cam action door channel types available. G 96 EMF G 96 EMF
closer system is suitable for Installation suggestions for G 96 GSR/GSR-EMFK 8 G 96 GSR/GSR-EMF
various door designs and the DORMA ITS 96 door
different rebate clearance closer system relating to the
dimensions. This adapt- most common door types are
ability is achieved through available from DORMA on
the combination of different request.
spindle lengths in the closer
K8 K 12
X = 8,5 X =12
ITS 96 2–4
ITS 96 3–6
X =12,5 X =16
ITS 96 2–4
ITS 96 3–6
with 4 mm
extended spindle
X =16,5 X = 20
ITS 96 2–4
ITS 96 3–6
with 8 mm
extended spindle
Q E
DORMA ITS 96 Applications
and installation d
D
Timber door, flush-closing, Timber door with steel frame,
clearance 8.5 mm, with flush closing, clearance
ITS 96 EN 3–6 and slide 12.5 mm, with ITS 96
channel G 96 N20 K8. EN 3–6, 4 mm extended
spindle and slide channel
G 96 N20 K8.
12,5
Please check
8,5
dimensions carefully
16
Q E
DORMA G 96 N, RF Slide channels
d
D
Standard model
G 96 N20
approx.
120° approx. 80°
Cushioned limit stay
G 96 N
31
440
20
200
200
20
ITS96/2-4
ITS96/3-6
Hold-open unit
approx.
120°
Hold-open range
The DORMA RF hold-open user, and the release force Not for fire and smoke Accessories
unit enables doors to be can be adjusted to the check doors.
securely held without any door type concerned. Y Hold-open unit
fall-back at precisely the The DORMA RF mechanism DORMA RF
required position up to an is non-handed and has been Version
opening angle of approx. specifically designed for Y K8
120°. The hold-open retrofitting to the G 96 N Y K12
function can be easily slide channel.
switched on and off by the ITS96RF/2-4
ITS96RF/3-6
Q E
DORMA G 96 N, RF Slide channels
d
D
20 145 440
min. 12
8,5
(46)
8,5
55
96 (99) 300 (286)
40
(32)
70 (73) 500
min. 50
=
(min. 40)
=
DORMA ITS 96 door closer with DORMA G 96 N20 slide channel in a timber door
Example: Anticlockwise-closing (ISO 6) door; mirror image applies to clockwise-closing (ISO 5) doors.
1451) 440
max. 16
1751) 375
Illustration shows the ITS 96, size 3 – 6
Dimensions shown in ( ) = ITS 96, size 2 – 4
DORMA ITS 96 door closer with DORMA G 96 N20 slide channel in an aluminium framed door
Example: Anticlockwise-closing (ISO 6) door; mirror image applies to clockwise-closing (ISO 5) doors.
1) Add 25 mm for aluminium profile frames with corner-angle reinforcement.
min. 3 105
145 440
175 375
DORMA ITS 96 door closer with DORMA G 96 N20 slide channel in a timber door-transom fixing
Example: Anticlockwise-closing (ISO 6) door; mirror image applies to clockwise-closing (ISO 5) doors.
Q E
DORMA G 96 EMF Slide channel assembly
d
D
Electro-mechanical hold-open
31
527
30
211 approx.
120° approx. 80°
211
20
Hold-open range
= Door stop
The DORMA G 96 EMF slide In the event of an alarm or The DORMA G 96 EMF slide Specification text
channel assembly enables a fault in the power supply, channel assembly comprises
the door to be held open the hold-open is released the arm, slide channel, slide DORMA ITS 96 ... door
securely at a pre-selected and the door is closed by block, electro-mechanical closer (see pages 4 and 5)
position without fall-back. the door closer. The release hold-open unit and fixing with G 96 EMF slide channel
The hold-open point can be is triggered by a signal from screws, and can be com- assembly, with integrated
adjusted within an opening external smoke detectors bined with both door closer 24 V DC electro-mechanical
angle of approx. 80° and (e.g. DORMA RMZ-K/S or sizes in the DORMA ITS 96 hold-open, tested to
120°. DORMA RM). range. EN 1155. Hold-open point
The release force for the In the case of particulary (80° – 120°) and release
Note: hold-open mechanism can large and heavy doors (over force adjustable.
The hold-open point also be adjusted without tools 1250 mm), we recommended Approved by the Institute for
constitutes the max. door and is rated to ensure that that DORMA EM hold-open Building Technology, Berlin,
opening angle (position door the door can also be easily magnets be employed for general use in hold-open
stop accordingly). released manually. instead of the electro- systems. Acceptance
mechanical hold-open unit. inspection of the system is
mandatory in Germany.
Technical data
Version
Operating voltage: 24 V DC, ± 15 % Y LH (ISO 6)
Power input: 1.4 W Y RH (ISO 5)
Rated for continuous duty: 100 % Y K8
Y K12
Release force: Adjustable
Make DORMA ITS 96 EMF
ITS96EMF/2-4
ITS96EMF/3-6
RM
RM RM
RMZ -K 230 VAC
±10 %
ITS 96
G 96 EMF
NC 8
C 9
HT NO 7 2
5
10
6 18 kΩ 15
14 18 kΩ 15
14
1
14 5 12 5
4 12
11
24V AC 11
3 3 18 k Ω
2 9 9
7 7
RMZ-K
G 96 E MF
ITS 96
Q E
DORMA G 96 EMF Slide channel assembly
d
D
Power supply 24 V DC
90 527
20 211 211
min. 16
12,5
30
96,5 (87,5)
55 (46)
8,5
40
(32) 96 (99) 300x40 (286x32)
70 (73) 500
min.50 =
(min.40)
=
DORMA ITS 96 door closer with DORMA G 96 EMF slide channel assembly in a timber door
Example: Anticlockwise-closing (ISO 6) door; mirror image applies to clockwise-closing (ISO 5) doors.
Power supply 24 V DC
901) 527
31
20 211 211
max. 16
12
30
96 (87)
1751) 375
DORMA ITS 96 door closer with DORMA G 96 EMF slide channel assembly in an aluminium framed door
Example: Anticlockwise-closing (ISO 6) door; mirror image applies to clockwise-closing (ISO 5) doors.
1) Add 25 mm for aluminium profile frames with corner-angle reinforcement.
Q E
DORMA G 96 GSR Slide channel assembly
d
D
Door co-ordinator
The DORMA G 96 GSR slide The DORMA G 96 GSR slide An overload release protects
channel with integral door channel door co-ordinator the door co-ordinator and
co-ordinator for pairs of features a push rod clamping the door set from damage.
doors ensures that the active system. As this system The DORMA G 96 GSR can
leaf always closes after the operates independently of be combined with both door
inactive leaf. door closer hydraulics, it closer sizes of the DORMA
offers maximum safety and ITS 96 range.
reliability.
Version/Function Door width (mm) Door leaf thickness min. (mm) Closer size ITS 96
GSR
Door co-ordinator 1400 – 2200 40 2–4
1400 – 2800 50 3–6
Connecting tube
Q E
DORMA G 96 GSR Slide channel assembly
d
D
Specification text
ITS96GSR/2-4
ITS96GSR/3-6
Example application
ITS 96 ITS 96
G 96 GSR
Q E
DORMA G 96 GSR-EMF Slide channel assembly
d
D
Door co-ordinator with electro-mechanical hold-open
This door co-ordinator not In the event of an alarm or a The DORMA G 96 GSR-EMF Regulations/Information
only ensures the correct fault in the power supply, slide channel door co-ordi-
closing sequence of pairs of the hold-open is released nator can be combined with The use of hold-open
doors, but also allows the and the door is closed by both door closer sizes of the devices may be subject to
door leaves to be individually the door closer. The release DORMA ITS 96 range. certain conditions –
held open by an electro- is initiated by a signal from In the case of particulary see page 25.
mechanical device. The external smoke detectors large and heavy doors (over
hold-open point for both (e.g. DORMA RMZ-K/S or 2500 mm), we recommended
door leaves lies between DORMA RM) or other fire that DORMA EM hold-open
approx. 80° and 120°. alarm. magnets be employed
Note: The release force for the instead of the electro-
The hold-open point also hold-open mechanism can mechanical hold-open unit.
constitutes the max. door be adjusted without tools
opening angle – position and is rated to ensure that
door stop accordingly. the door can also be easily
released manually.
Version/Function Door width (mm) Door leaf thickness min. (mm) Closer size ITS 96
GSR-EMF
Door-coordinator and 1400 – 2200 40 2–4
hold-open in both leaves 1400 – 2800 50 3–6
Connecting tube
Q E
DORMA G 96 GSR-EMF Slide channel assembly
d
D
Specification text
RMZ-K 230 VA C
±10 %
ITS 96
G 96 GSR-EMF ITS 96
RM RM
NC 8
C 9
HT NO 7
2
5
10
6 18 k Ω 15
14 18 k Ω 15
14
1
14 5 5
4 12 12
11
24V AC 11
3 3 18 k Ω
2 9 9
7 7
RMZ-K
G 96 GSR-EMF
ITS 96
Q E
DORMA G 96 GSR Slide channel
DORMA G 96 GSR-EMF door co-ordinators
90 512
max. 16
20 211 211
30
96,5 (87,5)
ITS 96 with
4 mm
40
extended
(32) spindle Active leaf
min. 700 mm
min. 50
(min. 40)
70 (73) 500
175 375
Connecting tube,
14 mm dia.
16
max. 10
31
A–A
Q
DORMA G 96 GSR Slide channel
DORMA G 96 GSR-EMF door co-ordinators d
D
Installation in a timber door
Power supply 24 V DC A
31 (for EMF only)
12,5
30
30
8,5
55 (46)
A
96,5 (87,5)
ITS 96 with
4 mm
40
extended
(32) spindle Active leaf Inactive leaf
min. 700 mm min. 700 mm
1450 – 2800
min. 50
(1450 – 2200)
(min. 40)
=
=
175 375 375 175
Connecting tube,
14 mm dia. 412 45
211 161
GSR door co-ordinator for
16 narrow inactive leaf
max. 10
31
286x32 54
A–A
28
380
Q E
DORMA G 96 GSR Slide channel
DORMA G 96 GSR-EMF door co-ordinators d
D
Installation in an aluminium framed door
Power supply 24 V DC
(for EMF only)
31
901) 512 527 901)
12
96 (87)
1400 – 2800
(1400 – 2200)
1)
Profile frames with corner angle reinforcement If the inactive leaves are particularly narrow (less than 700 mm),
512
please discuss the installation possibilities with DORMA and/or
115
the relevant profile manufacturer.
135 211
121 (124)
Q E
Frame and
DORMA RMZ-K/S, RM ceiling-mounted
smoke detectors d
D
230 V AC
RMZ-K/S frame-mounted smoke detector on the pull side connected to an ITS 96 EMF
Example: Anticlockwise-closing (ISO 6) door; mirror image applies to clockwise-closing (ISO 5) doors.
230 V AC
RMZ-K/S frame-mounted smoke detector on the pull side connected to an ITS 96 GSR-EMF
Example: Anticlockwise-closing (ISO 6) active leaf; mirror image applies to clockwise-closing (ISO 5) active leaf.
230 V AC
RMZ-K/S frame-mounted smoke detector on the push side connected to an ITS 96 GSR-EMF
Example: Anticlockwise-closing (ISO 6) active leaf; mirror image applies to clockwise-closing (ISO 5) active leaf.
Q E
DORMA ITS 96 Accessories
d
D
128 474
52000105
121,5 487
137 456
R8
31
R8
136 458
52000205
9
55
39 5
10
25
21
136 458
52000405
9
55
39 5
10
25
21
Fixings for ITS 96 and G 96 N20 in conjunction with aluminium framed doors
Example: Anticlockwise-closing (ISO 6) door; mirror image applies to clockwise-closing (ISO 5) doors.
Q E
DORMA ITS 96 Accessories
d
D
If the DORMA G 96 GSR
door co-ordinators are
required to operate independ- 90 527
8,5
with the ED 200 automatic
swing door operator, the
connection between the door
38
3
co-ordinator and the door
leaf is provided by means of 141 68
GSR pivot blocks.
Make
DORMA ITS GSR pivot block 175 375
133
106
30
76,5
38
30
141 68
450
115 120
123,5 103
9,5
=
14
=
175 375
Q E
DORMA ITS 96 Accessories
d
D
Routing jig
DORMA offers a routing jig
as a useful accessory. It
enables accurate cutting of Routing template for
the requisite recesses in the ITS 96 EN 3 – 6
door leaf and/or door frame
using a hand-held router.
The routing jig consists of
an aluminium base frame Routing template for
into which fit the templates ITS 96 EN 2 – 4
for the door closer and the
slide channel including the Routing template for
96
ITS
A
DO 2-5
RM
fixing accessories.
EN
slide channel G 96 N and
Further accessories fixing accessories frame
available: Carbide tip cutting
tool, 16 mm dia., 150 mm +20
l 24 mm
+20
+20
Q E
Hold-open systems Regulations/Information
d
D
The use of hold-open devices 1 General 2 Commissioning 3 Routine Inspection
may be subject to certain
conditions. These usually 1.1 In respect of doors etc. 2.1 After the system has 3.1 The operator should
deal particularly with the which are held open by been fitted ready for use on keep the hold-open system
relevant acceptance, routine hold-open systems, the area site, it should be commis- in a permanently fit state for
inspection and maintenance needed for closure must be sioned to check that its use and must inspect it at
requirements. kept permanently free of operation is problem-free and least once a month to en-
The information given on obstructions. This area that its installation complies sure its functional integrity.
this page is designed to should be clearly indicated with all relevant regulations.
inform all relevant persons by means of lettering, floor The commissioning should 3.2 In addition, it is the
of the most important meas- markings or similar. only be performed by quali- responsibility of the operator
ures to be implemented in If necessary, structural fied technical personnel. to ensure that all devices
order to ensure best practice measures may need to be are checked and maintained/
governing the operation of taken in order to ensure that serviced to ensure their
hold-open systems. wiring/ducting, stored goods combined functional integrity,
or structural components this to be performed at least
Further details can be found (e.g. false ceilings or other once a year, unless a shorter
in the following documents: components) do not fall time period is stipulated in
– Guidelines for hold-open down into the area to be the national regulations.
systems, published by the kept clear. This inspection and servicing
German Institute for activity should only be
Building Technology, 1.2 As far as possible, carried out by a specialist or
Berlin. smoke detectors should be suitably qualified person.
used for hold-open systems.
– Building Regulations, Smoke detectors should be 3.3 The scope, result and
England and Wales used for hold-open systems time of the routine inspec-
for doors etc. in emergency tions should be recorded,
– Other national building exits and escape routes. and these records should be
regulations retained by the operator.
– EN 1155 1.3 All hold-open devices
should allow manual release
without their operational
readiness being adversely
affected. Door closers with
electro-magnetic hold-open
systems can be released by
pressing lightly on the door
leaf. If hold-open magnets or
free-swing door closers are
used, the release function is
triggered by pressing a
switch. The switch must be
located in the immediate
proximity of the door and
must not be covered when
the door is held open.
Q E
DORMA ITS 96 Range of equipment and
optional accessories d
D
ITS 96 ITS 96 ITS 96
with 4 mm with 8 mm
extended extended
spindle spindle
A
M
M
R
R
O
O
D
D
EN 2 – 4 EN 2 – 4 EN 2 – 4
y 52400150 y 52410150 y 52420150
EN 3 – 6 EN 3 – 6 EN 3 – 6
y 52250150 y 52260150 y 52270150
G 96 N20 y y y
L x 52003701
X X X X
K8/K12 8
y y y
R x 52003801
X X X X
G 96 N L x 52001901
X y y y
K8
R x 52002001
X X X X
8
L x 52002201
X y y y
K12
R x 52002301
X X X X
G 96 EMF L x 52001501
X y y y
K8
R x 52001601
X X X X
10
L x 52002401
X y y y
K12 X X X
R x 52002501
X
2x 2x 2x
G 96 GSR x 52001801
X y y y
K8
2601) X
x 52004001 X X X
12
2x 2x 2x
x 52002601
X y y y
K12 X X X
260 X
1) x 52004101
2x 2x 2x
G 96 GSR-EMF x 52001701
X y y y
K8
2601) X
x 52004201 X X X
14
2x 2x 2x
x 52002701
X y y y
K12
2601) X
x 52004301 X X X
52000300 22 # # #
Q E
DORMA ITS 96 Range of equipment and
optional accessories d
D
RF hold-open RF hold-open Fixings for Fixings for Fixings for Pivot bearing Carry bar
unit for unit for G 96 mounting mounting mounting MK 397
G 96 N GSR, inactive the G 96 N on the G 96 N on the G 96 N20
leaf timber doors aluminium aluminium
doors doors
K8/K12 K8/K12
52003600 52003500 52000105 52000205 52000405 520034001) 470029xx2)
8 – 22 22 22 23 –
# #
# #
# # # #
# # # #
# # #
# # #
Colour xx
silver 01 Stainless steel
dark brown 03 “Design” finish 04
white (RAL 9016) 11 polished brass 05
white (RAL 9010) 10
Special colour 09
For specification text/product description, see page 20
Q E
d
D
Q R