Вы находитесь на странице: 1из 4

Crimping Network Cables

Tools and Materials You Will Need


Crimper with RJ-45 die.

Wire stripper

Wire cutter

RJ-45 plugs

Cat-5 UTP cable

Optional Tools
Wire Tester
Procedure

1. Strip off insulation

2. Untangle wires

3. Place wires in correct order &


straighten.

4. Trim wires to desired length.

Note:
If the wires are too long the plug will not
crimp onto the insulation for strength.

5. Slide wires all the way into the plug.


Make sure not to disrupt the color
scheme.
6. Crimp plug.

7. Repeat steps 1-6 for the other end.


8. Test wire using optional test equipment
or between working computer and hub
for patch (straight through) cables ,or
between switches for crossover cables.
Wire Color Scheme

Patch Cable Pin Color Diagram


(Straight Through) 1. Orange / White
2. Orange
Both ends follow this 3. Green / White
format. 4. Blue
5. Blue / White
6. Green
7. Brown / White
8. Brown

Crossover Cable Pin Color Diagram


1. Green / White
One end as a patch cable 2. Green
and the other as follows 3. Orange / White
4. Blue
5. Blue / White
6. Orange
7. Brown / White
8. Brown

Вам также может понравиться