Академический Документы
Профессиональный Документы
Культура Документы
Pulsor C
Quality, productivity,
ergonomics
Not only does the new tool
improve product quality, it’s
also extremely easy to set up,
boosting productivity (see side
panel). And like all pulse tools
from Atlas Copco, Pulsor C offers
excellent operator ergonomics.
t- y
se Eas
!
up
Perform basic Tool Control Box,
programming pressure adjustment
directly on Pulsor and shut-off valves
Focus or on a PC ensure bolts are
via ToolsTalk tightened to the
software. pre-set torque.
5 steps,
5 minutes
Set-up is fast
and easy – all
adjustments made
in the software.
1
Use ToolsTalk Pulsor
software to connect
to controller.
2
Start Tool Set-up.
3
Select target torque
and required
Reaction-free tool for
one-handed operation.
speed/accuracy.
Light, balanced and fast
for high productivity. 4
Perform test
tightenings and enter
results on PC or
controller – no
screwdriver required
to adjust torque.
5
When satisfied
with result, press
“Store” to save P-set.
PULSOR C – BOOST QUALITY, CUT COSTS
No missed screws – Pulsor C counts the tightenings and signals “Batch OK”
Ready for work!
Forget stripped screws – Pulsor C ensures the screw has been tightened correctly
No wrong/forgotten parts – Pulsor C signals “NOK” if the wrong screw or part is used
Easy set-up – the tool is Performance – the tool offers an excellent power-to-
extremely easy to set up: weight ratio.
see inset panel on page three. Hot swap – you can change the tool or cable without
Multiple P-set – one tool can perform up to 100 different shutting the system down because the tool shut-off is
P-sets. The right torque setting is selected by exchanging located in the Tool Control Box instead of the tool. No
sockets, scanning bar-codes and more. new settings in tool is needed.
High-speed tightening – Atlas Copco pulse tools are Wide torque range – since pressure is automatically
fast and powerful helping to boost productivity. adapted to each and every application, you can use
Fast in soft joints – Pulsor C can run at higher air Pulsor C in a wide range of applications.
pressure when working in soft joints to give you faster
tightening times.
MORE ERGONOMIC
MEANS HIGHER QUALITY
AND OUTPUT
TOOL ACCESSORIES
Model Ordering No. Model Ordering No.
CONTROLLER ACCESSORIES
Model Ordering No. Model Ordering No.
www.atlascopco.com